<<Back to Pump Menu
 
Bentonite Pumps
Giant Industries Bentonite pumps, are used for transporting of the Bentonite fluid used in the stabilization of bore holes in horizontal boring applications. These pumps range from up to 18.5 GPM – 84.5 GPM and up to 1500 PSI. All of these pumps are made of cast Iron fluid ends with solid ceramic plungers provide long life. And the gear end construction of heavy-duty cast iron crankcase, glazed, hardened and ground crankshaft and aluminum-bronze bearings provide years of life. With a seal life of 300-400 hours you can expect Performance Under Pressure with Giant.

BP5236
Volume:.............................................Up to 18.5 GPM
Discharge Pressure:...............................Up to 900 PSI
Speed:................................................Up to 570 RPM
Inlet Pressure:.......................................-4.35*-150PSI
Power Consumption:.........................................12 HP
Plunger Diameter:.............................................36mm
Plunger Stroke:................................................42mm
Crankshaft Diameter:........................................35mm
Key Width: .......................................................8mm
Shaft Rotation:...............Top of pulley towards manifold
Temperature of Pumped Fluids: ...............Up to 104°F
Inlet Ports:............................................(2) 1-1/2" NPT
Discharge Ports:.........................................(2) 1" NPT
Weight:..........................................................120 lbs.
Crankcase Oil Capacity:................................116 fl.oz.
Fluid End Material:........................................Cast Iron
BP5236

BP6150
Volume:............................................Up to 42.3 GPM
Discharge Pressure:............................Up to 1500 PSI
Speed:...............................................Up to 600 RPM
Inlet Pressure:.....................................-4.35* -150PSI
Power Consumption:......................................43.8 HP
Plunger Diameter:............................................50mm
Plunger Stroke:...............................................48mm
Crankshaft Diameter:.......................................45mm
Key Width: ....................................................12mm
Crankshaft Mounting:................................Either side
Temperature of Pumped Fluids: ..............Up to 104 oF
Inlet Ports:...........................................(2) 2-1/2" NPT
Discharge Ports:..................................(2) 1-1/4" NPT
Weight:.....................................................275.5 lbs.
Crankcase Oil Capacity:................................1.1 Gal.
Fluid End Material:......................................Cast Iron
BP6150

BP7170
Volume:.............................................Up to 84.5 GPM
Discharge Pressure:............................Up to 1015 PSI
Speed:...............................................Up to 560 RPM
Inlet Pressure:......................................-4.35* -150PSI
Power Consumption:.........................................59 HP
Plunger Diameter:.............................................70mm
Plunger Stroke:................................................52mm
Crankshaft Diameter:........................................48mm
Key Width: ......................................................14mm
Crankshaft Mounting:..................................Either side
Temperature of Pumped Fluids: ...............Up to 104 oF
Inlet Ports:............................................(2) 2-1/2" NPT
Discharge Ports:...................................(2) 1-1/4" NPT
Weight:..........................................................423 lbs.
Crankcase Oil Capacity:..................................1.1 Gal.
Fluid End Material:........................................Cast Iron
BP7170

Specifications are subject to change without notice