CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump

Spotlight on CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump

CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump – Direct-Drive Model, CS, 10.5/2000, 1750 RPM, FBB/S-Valves.

This CAT Pump 7CP6110 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1750 RPM permits a close coupled installation using a bell housing and flexible coupling. Select 31570, 8370, 8375, 8380 according to desired performance. [7CP6110BH103 Pump, motor, coupling and bell housing shown]

The CAT Pump 7CP6110 Features:

  • Forged Brass head with optional FPM and EPDM elastomers offer compatibility with a wide range of liquids.
  • Flexible coupling/bell housing, gearbox and belt drive options provide flexibility with a compact footprint.
  • Rugged continuous-duty triplex design provides long life and low maintenance.
  • Matched system accessories to complete your system whether you design or we custom build to your specifications.
CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump

CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump

The CAT Pump 7CP6110 has the following Specifications:

  • Inlet Pressure Range……………….Flooded to 70 psi (Flooded to 4.9 bar)
  • Bore………………………………………………………0.866” (22 mm)
  • Crankcase Capacity…………………………………38 oz. (1.15 l)
  • Maximum Liquid Temperature ………………….140°F (60°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2)…………………………………….3/4” NPTF (3/4” NPTF)
  • Discharge Ports (2)…………………………….1/2” NPTF (1/2” NPTF)
  • Shaft Diameter………………………………………..0.945” (24 mm)
  • Weight (7CP6110)………………………………..29.1 lbs. (13.2 kg)
  • Weight (7CP6170)………………………………..29.7 lbs. (13.5 kg)
  • Weight (7CP6110G1)…………………………….38.6 lbs. (17.5 kg)
  • Dimensions (7CP6170)………..13.45 x 11.14 x 6.89” (342 x 283 x 175 mm)
  • Dimensions (7CP6110)………….13.45 x 9.26 x 6.89” (342 x 235 x 175 mm)
  • Dimensions (7CP6110G1)……13.45 x 12.89 x 8.19” (342 x 327 x 208 mm)
  • Flow………………………………………………….10.5 gpm (40 l/m)
  • Pressure Range………………………….100 to 2000 psi (7 to 140 bar)
  • RPM………………………………………………….1750 rpm (1750 rpm)
  • Stroke……………………………………………………0.854” (21.7 mm)
CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump

CAT Pump 7CP6110 Ceramic Pressure Washer Plunger Pump

7CP6110 Datasheet DATA SHEET Service Manual SERVICE MANUAL

Our Price: $3,033.00 7CP6110
Availability:: Available for Order
Product Code: 7CP6110
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THIS 7CP6110 11/18/2011

7CP6110

Permanent link to this article: https://etscompany.com/wordpress/2011/11/18/cat-pump-7cp6110-ceramic-pressure-washer-plunger-pump/