CAT Pressure Washer Plunger Pump 60G1

Spotlight on CAT Pressure Washer Plunger Pump 60G1.

CAT Pressure Washer Plunger Pump 60G1 with Helical Gearbox, 1″ Shaft, 4.5/4000, 1570/3200 RPM Inclds: 60, 8071

1 Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life on this 60G1 Pump.
2 Manifolds are a high tensile strength forged brass for long term, continuous duty.
3 100% wet seal design adds to service life by allowing pumped liquids to cool and lubricate on both sides.
4 Stainless steel valves, seats and springs provide corrosion-resistance, ultimate seating and extended life on this 60G1 Pump.
5 Specially formulated, CAT PUMP exclusive, V-Packings offer unmatched performance and seal life.

CAT Pressure Washer Plunger Pump 60G1

CAT Pressure Washer Plunger Pump 60G1

The CAT Pressure Washer Plunger Pump 60G1 Features:

  • Triplex design delivers high efficiency and low pulsation on this 60G1 Pump.
  • Durable dual V-Packings are lubricated and cooled by pumped liquid.
  • Pre-Set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.
  • Special high density, polished, concentric plungers provide a true wear surface and extended seal life for the 60G1 Pump.
  • Optional HT, FPM elastomers for compatibility with many liquids and temperatures up to 200°F.
CAT Pressure Washer Plunger Pump 60G1

CAT Pressure Washer Plunger Pump 60G1

The CAT Pressure Washer Plunger Pump 60G1 has the following specifications:

  • Bore……………………………………………………………………..0.708” (18 mm)
  • Inlet Pressure Range………………………Flooded to 60 psi (Flooded to 4 bar)
  • Crankcase Capacity…………………………………………….25 oz. (0.75 l)
  • Standard Liquid Temperature…………………………..160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2)………………………………………………..1/2” NPTF (1/2” NPTF)
  • Discharge Ports (2)………………………………………3/8” NPTF (3/8” NPTF)
  • Shaft Diameter…………………………………………………..0.945” (24 mm)
  • Weight……………………………………………………………29.25 lbs. (13.3 kg)
  • Weight w/Gearbox………………………………………….36.8 lbs. (16.7 kg)
  • Dimensions…………………………………….13.93 x 8.2 x 6.41” (354 x 208 x 163 mm)
  • *See Gearbox Data Sheet 8051-8078 for maximum engine rpm.
  • Flow …………………………. 5.5 gpm (21 l/m) 4.5 gpm (17 l/m)
  • Pressure Range……….. 100 to 3500 psi (7 to 245 bar) 100 to 4000 psi(7 to 275 bar)
  • Pump RPM………………. 1570 rpm (1570 rpm) 1570 rpm (1570 rpm)
  • Engine RPM…………….. 3200 rpm (3200 rpm) 3200 rpm (3200 rpm)
  • Stroke……………………….. 0.728” (18.5 mm) 0.591” (15 mm)
CAT Pressure Washer Plunger Pump 60G1

CAT Pressure Washer Plunger Pump 60G1

CAT Pressure Washer Plunger Pump 60G1 Datasheet Data Sheet Service Manual Service Manual

Our Price: $3,175.00 60G1
Availability:: Available for Order
Product Code: 60G1
CAT Pressure Washer Pump
PSI: 4000
GPM: 4.5
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE 60G1 PRESSURE WASHER PUMP 12/01/2011

Permanent link to this article: https://etscompany.com/wordpress/2011/12/01/cat-pressure-washer-plunger-pump-60g1/