Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

Spotlight on the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

 Annovi Reverberi Pressure Washer Pump - XTA3G22E-F8

Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

Features of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:

  • Direct Drive with electric flange
  • 5/8″ Shaft Diameter
  • Die-cast body and brass head
  • Plungers – solid ceramic titanium impregnated for extended pump life
  • Crankcase – oversized die cast aluminum with special cooling fins
  • Bearings – premium tapered roller bearings
  • Valves, seats and springs – stainless steel with ultraform cages
  • Plunger rods – high strength stainless steel.
  • Connecting rods – oversized one piece special alloy to assure proper plunger alignment

Specifications of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:

 

  • Max GPM………………3
  • Max LMP…………………………11.4
  • Max PSI………………….2200
  • Max Bar………………………….152
  • Power EBHP……………4.5
  • Bore Dia. mm…………………….18
  • Stroke mm……………….9.6
  • Weight Lbs………………………..11
  • Max Temp……………….140°
  • Oil Capacity………………………10oz
  • Inlet Thread ……………1/2”F
  • Discharge Thread……………….3/8”F
Annovi Reverberi Pressure Washer Pump - XTA3G22E-F8

Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

 

XTA3G22E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2200 PSI @ 1750 RPM, XTA1750rpm.

XTA3G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. The XTA3G22E-F8 has One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, over sized for strength and load disbursement.

XTA3G22E-F8 Pump Breakdown

XTA3G22E-F8 Pump Breakdown

Click here for the Parts Breakdown of the XTA3G22E-F8 Pressure Washer Pump

  • Items NOT INCLUDED with your XTA3G22E-F8 Plunger Pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
  • The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your XTA3G22E-F8 Plunger Pump (saving you the trouble of rebuilding your pump)
  • PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
  • The INLET WATER FILTER will catch most small debris before it enters your XTA3G22E-F8 Plunger Pump
  • The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
  • The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your XTA3G22E-F8 Plunger Pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
  • PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

 

List Price: $696.75
You save $341.51!

SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: XTA3G22E-F8
Price subject to change on the XTA3G22E-F8 Pressure Washer Pump from Annovi Reverberi

Permanent link to this article: https://etscompany.com/wordpress/2014/12/08/annovi-reverberi-pressure-washer-pump-xta3g22e-f8/