The post Pressure washer / Power washer Broke? appeared first on ETS Co. Pressure Washers and More!.

The post Need lance tubes with grips for the end of your Giant Pump run pressure washer appeared first on ETS Co. Pressure Washers and More!.

This HR3025-111H pump can pump water up to 80 degrees making it perfect for almost any cleaning situation you and your pressure washer get into.  Great for cutting grease and dirt from any surface.

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps has the following specifications:

• Volume on the HR3025-111H is 3.0 GPM
• Maximum Discharge Pressure of the HR3025-111H is rated at 2500 PSI
• Maximum Discharge Pressure (HR3030)  is 3000 PSI
• Maximum Inlet Pressure is Up to 90 PSIG1
• The RPM of the unit is 3450
• Plunger Diameter measures at 16mm
• Stroke of the pump is measured at 5.9mm (8.0 o angle)
• The Crankcase Oil Capacity is 4.5 fl. oz.
• Operating Temperature of Pumped Fluids Up to 80 F
• Inlet Port on this pump measure 1 x 1/2″ NPT
• The Discharge Ports measure 3/8″ NPT
• Shaft Rotation is Clockwise
• Weight of this unit is only 11.4 lbs.
• Width of the overall pump is 6-7/16″
• Height on this pump is 10-1/4″
• Swash Plate Bore of the  HR3025-111H measures 3/4″x3/16″ Keyway
• Swash Plate Bore of the (HR3030) measures 1″x3/16″ Keyway
• Valves are made of Polyamide Plastic

Want to fix and already owned pump like this from Giant Pumps?  Go to our repair and breakdown manual page and find this unit or any Current Giant Pump on the market today, to see it’s repair parts and kits by clicking here.

Not sure if the HR3025-111H is the right pump for your machine? Give us a call and a Giant Pump Specialist will be glad to assist you with any questions.  We are here M – F 7:30 am till 4:00 PM EST.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order your replacement HR3025-111H pump today?  Click here and order it securely on our eCommerce site.

This unit does qualify for our everyday sale of 5% off $50.00 or more.  At checkout just add the coupon code “5off” into the coupon field to get and extra 5% off this unit, and anything else you order with it!

The post GIANT PUMPS – HR3025-111H – Triplex Ceramic Plunger Pump appeared first on ETS Co. Pressure Washers and More!.

The post GIANT PUMPS – P219L-SG – Triplex Ceramic Plunger Pump appeared first on ETS Co. Pressure Washers and More!.

GIANT PUMPS – GXRH2224-111, GXRH PUMP,2.2GPM@2400PSI@3450RPM

The GXRH2224-111 Features

• GXRH2224-111– 2.2 GPM @ 2400 PSI
• Maximum Inlet Pressure -Up to 90 PSIG1
• RPM – 3450
• Plunger Diameter – 16mm
• Stroke GXRH2224-111 – 4.7mm (6.1 o angle)
• Crankcase Oil Capacity – 4.7 fl. oz. (4.1 fl.oz. horizontal)
• Temperature of Pumped Fluids – Up to 80 oF
• Inlet Port – 1/2″ NPT
• Discharge Ports – 3/8″ NPT
• Shaft Rotation – Either Direction2
• Weight – 9 lbs.
• Width – 8.325″
• Height – 6.45″
• Swash Plate Bore (Horizontal) – 3/4″ x 3/16″ Keyway
• Swash Plate Bore (Vertical) – 7/8″ x 3/16″ Keyway
• Valve Type – Polyamide Plastic
• 1 A 25 PSIG minimum inlet pressure is required.
• 2 The pump itself can be driven in either direction of rotation; however, the cooling fan
• on TEFC motors must always be positioned so that the cooling air is drawn from the
• non-drive end of the motor towards the pump.

Is this GXRH2224-111 – Triplex Plunger Pump not the right pump?  Click the link to see all our Pressure Washer Pumps from GIANT PUMPS.

List Price: $270.00
Our Price: $207.77 Click the link to order this GXRH2224-111 Giant Pump.
You save $62.23!
Availability:: available for order
Product Code: GIANT-GXRH2224-111
Price subject to change.  Price valid on this GXRH2224-111 pressure washer Giant Pump 4/25/2012

The post GIANT PUMPS – GXRH2224-111 – Triplex Plunger Pump appeared first on ETS Co. Pressure Washers and More!.

In this endeavor we have struck deals with manufacturers of Pressure Washer and Cleaning Equipment like:

• CAT Pumps
• Annovi Reverberi (AR North America) Pressure Washer Pumps
• GIANT Pumps
• General Pumps
• Hypro Pumps
• Comet Pumps
• Mi-T-M Pressure Washers
• LANDA Pressure Washers

And MANY MORE!

Equipment Trade Service Company also has our own repair department for all your pressure washer and cleaning equipment products.  Our technicians have over 50 years in the industry.  This is just something stores like ACE, Home Depot and Lowes can’t offer.  In fact when they need some of their rentals repaired they come to ETS Company.  ETS offers Pressure Washer Service on virtually ALL brands (ALL makes and models) of pressure washers, steam cleaners and pressure washer pumps to the Delaware Valley. We service brands like LANDA, Mi-T-M, Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi, Hypro Pump and more!

ETS Company offers a FREE PRESSURE WASHER PUMP REPAIR ESTIMATE*

Call our service department at 1-877-824-7763 x 120 to discuss ETS Co repairing your pressure washer pump any make or model including but not limited to CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi & Hypro Pump. Ship it to us via UPS /FedEX (trackable service) **, ETS will estimate your pump, call you for repair approval and ship it back to you.
* Estimate is free to customers who choose to have ETS Co. Repair their pump
** Customers are responsible for shipping costs to and from ETS Co.

Our sales team at Equipment Trade Service Company has over 50 years experience in selling and getting the right answers to you fast!  It’s not some teenager right out of high school trying to figure out the part or O-Ring you need to repair your pressure washer –  the life blood of your business.  The big box stores like Home Depot or Lowes think that a few hours of training videos on a machine as complex as a pressure washer is enough training and skill to make their employees “experts” on the inner workings of pressure washers and other cleaning machines.  ETS Company relies on the know how and years of going over pressure washer breakdowns and looking up parts and kits for our customers needs as our training.  It’s not a few hours here, we are talking years of learning and helping which makes our customer service for your industrial cleaning needs # 1 when compared to all the other competition out there.

So the next time your Pressure Washer, Steam Cleaner or Pressure Washer pump from any manufacturer like LANDA, Mi-T-M, Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi, Hypro Pump needs repair or replacing, come to Equipment Trade Service Company first.  The big box stores Home Depot and Lowes and even ACE can’t compete with our knowledge and expertise to get you back on the road making money for yourself with the right equipment and knowledge.

The post ETS Company’s Experience Beats Home Depot and Lowes for Pressure Washers appeared first on ETS Co. Pressure Washers and More!.

Description: LANDA – GIANT Pressure Washer PUMP P313 RIGHT-HAND SHAFT – 8.702-356.0

The GIANT Pressure Washer PUMP P313 Features:

• Volume ………………………………………………… Up to 3.8 GPM ………(14.4 LPM)
• Discharge Pressure P313 (Continuous) ……… Up to 3200 PSI ……… (220 bar)
• Discharge Pressure P313 (Intermittent) ……… Up to 3500 PSI ……………(240 bar)
• Discharge Pressure P314 (Continuous) ……… Up to 3500 PSI ……… (240 bar)
• Discharge Pressure P314 (Intermittent) ……… Up to 4000 PSI ……… (275 bar)
• Inlet Pressure ………………………………………………………………………. Positive Inlet Pressure Required
• Stroke ………………………………………………….. 0.55”……………………14.1mm
• RPM…………………………………………………………………………………..Up to 3450 RPM
• Plunger Diameter …………………………………… 0.47”……………………12mm
• Temperature of Pumped Fluids ………………… Up to 160 oF ………….(71 oC)
• Inlet Ports …………………………………………………………………………… (2) 1/2″ BSP
• Discharge Ports …………………………………………………………………… (2) 3/8″ BSP
• Shaft Rotation ……………………………………….. Top of pulley towards manifold
• Crankshaft Diameter ……………………………………………………………..24mm
• Key Width …………………………………………………………………………..8mm
• Shaft Mounting ……………………………………………………………………. Either side2
• Weight …………………………………………………. 16 lbs. …………………. (7.26 kg)
• Crankcase Oil Capacity ………………………….. 14.2 fl.oz. …………….. (0.42 liters)
• Extended Crankcase Oil Capacity …………….. 17 fl. oz. ………………. (0.5 liters)

The repair Manual for the Giant Pressure Washer Pump P313 can be found by clicking here.

INSTALLATION INSTRUCTIONS FOR THE GIANT Pressure Washer PUMP P313

Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance.

1. The P313 pump should be installed flat on a base to a maximum of a 15 degree angle of inclination to ensure optimum lubrication.

2. The inlet to the P313 pump should be sized for the flow rate of the pump with no unnecessary restrictions that can cause cavitation. Teflon tape should be used to seal all joints. If pumps are to be operated at temperatures in excess of 1600 F, it is important to insure a positive head to the pump to prevent cavitation.

3. The discharge plumbing from the pump should be properly sized to the flow rate to prevent line pressure loss to the work area. It is essential to provide a safety bypass valve between the pump and the work area to protect the pump from pressure spikes in the event of a blockage or the use of a shut-off gun.

4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connections, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsation. Dampeners can also reduce the severity of pressure spikes that occur in systems using a shut-off gun. A dampener must be positioned downstream from the unloader.

5. When viewed from the side of the P313 pump, crankshaft rotation is clockwise on pumps with left handed shafts and counterclockwise on pumps with right handed shafts. Reverse rotation may be safely achieved by following a few guidelines available upon request from Giant Industries, Inc. Required horsepower for system operation can be obtained from the charts on pages 3-7 and 10.

6. Before beginning operation of your pumping system, remember: Check that the crankcase and seal areas have been properly lubricated per recommended schedules. Do not run the P313 pump dry for extended periods of time. Cavitation will result in severe damage. Always remember to check that all plumbing valves are open and that pumped media can flow freely to the inlet of the P313 pump.

List Price: $1,008.31
Our Price: $924.01
You save $84.30!

Availability:: available for order
Product Code: LAN-8.702-356.0
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE GIANT PRESSURE WASHER PUMP P313 – 1/09/2012

The post GIANT Pressure Washer PUMP P313 appeared first on ETS Co. Pressure Washers and More!.

At Checkout enter either:

BF15OFF – for 15% off your entire order

 Or

BFSHIP – for free shipping on your entire order.

Only one coupon may be used per order and each coupon is only valid once during this GREAT BLACK FRIDAY SALE!

 Don’t Delay.  WRITE A NOTE FOR YOURSELF TO  GO TO www.shopetsonline.com  on either Friday November 25^th or Saturday November 26^th 2011, and enter a code BF15OFF or BFSHIP to claim your savings.

The post Black Friday Sale! appeared first on ETS Co. Pressure Washers and More!.

Spotlight on Consumer Giant Pumps

CONSUMER
Giant PUMPS

Click the following giant pump models to view the pump manual in PDF format. If you don’t have Adobe Acrobat Reader to view PDF documents, click the following icon to download one.

GXR Vertical or Horizontal Pumps with Regulator includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End
Giant GXR 2424	2.4	2400	3450	5.2	Brass
Giant GXR 2224	2.2	2400	3450	5.0	Brass

Weight: 9 lbs.
Bore
Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature:
80 degree F
Inlet Port: 1/2″ NPT

Discharge Port: 3/8″
NPT

Giant GX Vertical or Horizontal Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End
Giant GX 2025	2.0	2500	3450	3.4	Brass
Giant GX 2325	2.3	2500	3450	3.9	Brass
Giant GX 2525	2.5	2500	3450	4.3	Brass

Weight: 9 lbs.
Bore
Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature:
80 degree F

Inlet Port: 1/2″ NPT

Discharge Port: 3/8″
NPT

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

The post Spotlight on Consumer Giant Pumps appeared first on ETS Co. Pressure Washers and More!.

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT GX Vertical or Horizontal Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT P200 PUMPS

Series Triplex Plunger Pumps

GIANT BELT DRIVE Pump	GIANT ELECTRIC DRIVE Pump
	GIANT GAS DRIVE Pump

GIANT P200 Pump Assemblies

GIANT P300 PUMPS

Series Triplex Plunger Pumps

GIANT P300 Series Pump with Electric Drive	GIANT P300 Series Pump with Gas Drive
GIANT P300 Series Pump	GIANT P300 Series Pump with Gearbox

GIANT P300 SERIES PUMPS

Weight: 37 lbs. Shaft Size: 28mm Max. Temperature: 160 oF (104 oF for P460) * Consult factory when operating at this speed.

Port sizes:

BP5236

Volume:………………………………………Up to 18.5 GPM Discharge Pressure:………………………….Up to 900 PSI Speed:…………………………………………Up to 570 RPM Inlet Pressure:…………………………………-4.35*-150PSI Power Consumption:…………………………………..12 HP Plunger Diameter:………………………………………36mm Plunger Stroke:…………………………………………42mm Crankshaft Diameter:………………………………….35mm Key Width: ……………………………………………….8mm Shaft Rotation:……………Top of pulley towards manifold Temperature of Pumped Fluids: ……………Up to 104°F Inlet Ports:……………………………………..(2) 1-1/2″ NPT Discharge Ports:…………………………………..(2) 1″ NPT Weight:………………………………………………….120 lbs. Crankcase Oil Capacity:…………………………..116 fl.oz. Fluid End Material:………………………………….Cast Iron

BP6150

Volume:……………………………………..Up to 42.3 GPM Discharge Pressure:……………………….Up to 1500 PSI Speed:………………………………………..Up to 600 RPM Inlet Pressure:……………………………….-4.35* -150PSI Power Consumption:………………………………..43.8 HP Plunger Diameter:……………………………………..50mm Plunger Stroke:………………………………………..48mm Crankshaft Diameter:…………………………………45mm Key Width: …………………………………………….12mm Crankshaft Mounting:…………………………..Either side Temperature of Pumped Fluids: …………..Up to 104 oF Inlet Ports:…………………………………….(2) 2-1/2″ NPT Discharge Ports:…………………………….(2) 1-1/4″ NPT Weight:……………………………………………..275.5 lbs. Crankcase Oil Capacity:…………………………..1.1 Gal. Fluid End Material:………………………………..Cast Iron

BP7170

Volume:………………………………………Up to 84.5 GPM Discharge Pressure:……………………….Up to 1015 PSI Speed:………………………………………..Up to 560 RPM Inlet Pressure:………………………………..-4.35* -150PSI Power Consumption:…………………………………..59 HP Plunger Diameter:………………………………………70mm Plunger Stroke:…………………………………………52mm Crankshaft Diameter:………………………………….48mm Key Width: ………………………………………………14mm Crankshaft Mounting:…………………………….Either side Temperature of Pumped Fluids: ……………Up to 104 oF Inlet Ports:……………………………………..(2) 2-1/2″ NPT Discharge Ports:……………………………..(2) 1-1/4″ NPT Weight:………………………………………………….423 lbs. Crankcase Oil Capacity:…………………………….1.1 Gal. Fluid End Material:………………………………….Cast Iron

GIANT Light Industrial Pumps

Weight: 9 lbs. Bore Size: 3/4″ for HR2527, 1″ for HR3030 Max. Temperature: 80 degree F Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT
GIANT HIGH TEMPERATURE PUMPS

Max. Temperature: 220 oF + Max. Temperature: 190 oF * HTC = Pumps with coolant connection

GIANT CORROSION RESISTANT PUMPS

Aluminum Bronze Manifolds & 316 Stainless Steel Internal Wet End Parts

316 Stainless Steel Manifolds and Internal Wet End Parts

GIANT Industrial Triplex Plunger Pumps

P46/P55/P56 Pumps

* Includes Pump, Unloader, Pop-off valves, Two Guns, Pressure Switch, Thermal Relief Valve Weight: 18 lbs. Shaft Size: 18mm for P46W, 22mm for P55, P56, P56-5100, P57, 24mm for P54, P58, P59 Max. Temperature: 160 degree F

P54/P58/P59 Pumps

Inlet Port & Discharge Port:

GIANT SP Pumps

Weight: 30 lbs. Shaft Size: 28mm Max. Temperature: 160 degree F Inlet Port: (2) 3/4″ NPT Discharge Port: (2) 3/8 ” NPT

GIANT MP Series Pumps

Weight: 72 lbs. Shaft size: 28 mm Max. Temperature: 160 oF

Port sizes:

GIANT LP Series Pumps

LP301	LP1000	LP700

Giant LP Series – High Pressure

GIANT LP Series – High Flow

* Intermittent duty only

Weight: 116 lbs. Shaft Size: 35mm

Max. Temperature: 140 degree F (104 F for LP1000)

Inlet Port & Discharge Port:

GIANT GP Series Pumps

GP7124A	GP7255A

GIANT GP Series – High Pressure

GP Series – High Flow

Inlet Port & Discharge Port:

The post GIANT Pumps, Parts and Kits appeared first on ETS Co. Pressure Washers and More!.