The Mi-T-M 8-0522 is a pressure-trapping unloader designed for demanding pressure washer applications, with a maximum rating of 5,100 PSI and 6.5 GPM. That’s a lot of cleaning power—and the right replacement part can help you put it back to work.

Mi-T-M 8-0522 Unloader

Don’t Let a Small Part Stop a Big Job

Pressure washers don’t get much downtime when you’re relying on them for commercial cleaning, maintenance, equipment washing, or other tough jobs. When an unloader starts causing problems, ignoring it can mean inconsistent performance, pressure issues, or equipment that simply isn’t getting the job done.

Replacing the worn component with the correct Mi-T-M 8-0522 Unloader gives you a straightforward way to address the problem and get your machine ready for work again.

This pressure-trapping unloader features 3/8-inch male and 1/2-inch female connections and is designed for high-pressure applications where dependable performance matters. It’s used on select Mi-T-M pressure washer models, including various machines in the 4004 and 5004 series.

Built for Serious Cleaning Power

At 5,100 PSI and 6.5 GPM, the 8-0522 isn’t designed for lightweight cleaning chores. It’s intended for pressure washers that bring some serious muscle to the job.

Whether you’re replacing a worn unloader during routine maintenance or trying to get a dependable pressure washer back into service, having the correct part on hand can save you time, frustration, and potentially an unnecessary equipment headache.

Of course, compatibility is important. Before ordering, compare the part number and your pressure washer’s model information to make sure the Mi-T-M 8-0522 is the correct replacement for your machine.

Get the Right Part and Get Back to Cleaning

Nobody buys a powerful pressure washer because they enjoy watching it sit idle. You bought it to clean, blast away grime, and tackle jobs that ordinary equipment can’t handle.

If you’re specifically searching for Mi-T-M part 8-0522, don’t waste time sorting through generic parts that may not be the right fit. The Mi-T-M 8-0522 Unloader is built for high-pressure applications and gives you the replacement component you need to keep your equipment moving.

Order your Mi-T-M 8-0522 today from Shop Ets Online and get your pressure washer ready for its next big cleaning job.

The post Mi-T-M 8-0522 Unloader: The Part That Keeps Big Pressure Working appeared first on ETS Co. Pressure Washers and More!.

General Pump 100984

Rated for 6–12 GPM and up to 4,500 PSI, this compact service assembly is designed for serious pressure-washing equipment. It features a 1/2″ NPT male inlet and 3/8″ barb side outlet, making it a practical replacement for compatible systems.

Small Component. Big Pressure.

Don’t let its approximately 0.5 lb. weight fool you. This is a small part designed to live in a big-pressure world. The 100984 is rated for water temperatures up to 284°F, making it well suited for demanding cleaning and maintenance applications.

Whether you’re replacing a worn component, tackling routine maintenance or trying to get equipment back in service, using the correct assembly can save you from turning a simple repair into a bigger headache.

One Important Detail Before You Order

There’s one thing you’ll want to get right: the PSI setting must be specified when ordering. Be sure to include your desired PSI setting in the order notes so the assembly can be supplied according to your application.

Get the Part. Get Back to Work.

Nobody wants a pressure washer sitting on the sidelines because of a small replacement component. If the General Pump 100984 is the part you’ve been searching for, you’ve found it.

Order your General Pump 100984 Service Assembly from ShopETSonline and get the replacement component you need to keep your pressure-washing equipment working hard.

ORDER TODAY!

The post Looking for General Pump 100984? You’re in the Right Place. appeared first on ETS Co. Pressure Washers and More!.

AR1040760

Whether you found this page by searching for AR1040760, 9910-1040760, or Hypro 9910-1040760 replacement, the goal is the same: find the correct component quickly and get your equipment back to work.

One Replacement Part, Two Part Numbers

Part numbers can make equipment repairs confusing, especially when manufacturers use different numbering systems or a newer replacement number takes the place of an older one. That’s why it’s helpful to know the connection between these two numbers.

Hypro 9910-1040760 and AR1040760 refer to the replacement relationship for this elbow fitting. The AR1040760 is an Annovi Reverberi repair part identified as a replacement for Hypro 9910-1040760. It features an AL45 3/4″ x M Plug configuration for compatible applications.

So, if your search started with the old Hypro number, 9910-1040760, or you were given the newer AR1040760 number, you can use this information to help identify the replacement you need.

Don’t Replace the Pump When You May Only Need the Fitting

A small damaged or worn fitting doesn’t necessarily mean your entire pressure washer pump needs to be replaced. Components can experience wear from pressure, vibration, repeated connections and everyday use. Replacing the individual fitting can be a straightforward way to keep compatible equipment maintained and operating properly.

That’s where having the correct replacement number matters. Instead of searching endlessly for Hypro 9910-1040760, you can also search for AR1040760 to find the replacement component.

Get AR1040760 from ShopETSonline

At ShopETSonline, we understand that equipment repairs don’t wait. Whether you’re a pressure washer professional, service technician, contractor or equipment owner, finding the right replacement part quickly can help minimize downtime.

We offer a wide selection of pressure washer pumps, fittings, repair parts and components, making it easier to track down those parts that aren’t always easy to find.

Looking for Hypro 9910-1040760? Search for AR1040760. Looking for AR1040760? You’ve found the replacement connection.

Check your equipment specifications and application, then order your AR1040760 Elbow, AL45 3/4″ x M Plug from ShopETSonline and get your repair moving.

Order today!

The post AR1040760 – Replacement for Hypro 9910-1040760 appeared first on ETS Co. Pressure Washers and More!.

It’s frustrating, especially when the solution is something as simple as the Hypro EL200 Plastic Fitting Elbow. This handy 2″ MNPT to 2″ hose barb fitting is designed to help make the right connection in your fluid-handling setup without turning a simple repair into a major project.

Hypro EL200 Plastic Fitting Elbow

At just $8.46, the EL200 is an inexpensive part to replace a worn fitting, complete a repair, or simply keep tucked away as a spare. Why wait until you’re in the middle of a job to discover you need one?

Keep Your Equipment Ready to Work

The right replacement parts can make maintenance faster and help you avoid unnecessary downtime. The Hypro EL200 gives you a practical connection solution without spending a fortune—and ordering it from shopETSonline makes getting the part you need easy.

Whether you’re maintaining your spraying equipment, servicing a pump, or stocking up on commonly needed replacement parts, adding an EL200 to your order now could save you a headache later.

And at a price this easy on the wallet, keeping an extra one on the shelf makes plenty of sense.

Why Wait?

You already know how quickly a small equipment problem can become a big inconvenience. Don’t let a missing fitting be the reason your next job gets delayed.

Order the Hypro EL200 from shopETSonline today. It’s affordable, practical, and ready to help keep your equipment connections where they belong—so you can get back to the work that matters.

Grab yours now while it’s available and keep a spare on hand. Your future self—and your equipment—may thank you.

The post Hypro EL200 Plastic Fitting Elbow. The Small Part with a Big Difference. appeared first on ETS Co. Pressure Washers and More!.

When your Mi-T-M pressure washer is ready to tackle the next big cleanup, repair, or jobsite challenge, the last thing you want is a small worn component bringing everything to a halt. That’s why having the right replacement part can make a surprisingly big difference.

The Mi-T-M Part 46-0889 Valve Cap is a replacement component for compatible Mi-T-M pressure washer pump assemblies. If your equipment needs a new valve cap, getting the correct part is an easy way to keep your maintenance project moving instead of spending your day searching for the right replacement.

46-0889

The Right Part Makes Repairs Easier

Nobody gets excited about tracking down replacement parts—but finding the right one quickly is a pretty great feeling. At Shop Ets Online, we make it easier to find the Mi-T-M parts you need without the endless catalog hunt.

Whether you’re maintaining equipment for your business, keeping a fleet of pressure washers working, or handling repairs yourself, the Mi-T-M 46-0889 Valve Cap is a smart replacement to have ready.

Why Wait Until You Need It?

A pressure washer rarely seems to choose a convenient time for a repair. When equipment is sitting idle, every minute spent searching for the right replacement can feel like wasted time. Ordering your Mi-T-M 46-0889 now means you can take care of the repair before a small maintenance issue turns into an unexpected interruption.

Don’t wait for your next job to remind you that you needed the part yesterday. Order the Mi-T-M 46-0889 Valve Cap from Shop Ets Online today and get ahead of your equipment maintenance.

Find the part. Make the repair. Get back to work. Shop now and keep your Mi-T-M equipment ready for whatever comes next.

ORDER HERE

The post Get the Mi-T-M Part 46-0889 Valve Cap. Don’t Let a Small Part Stop a Big Job! appeared first on ETS Co. Pressure Washers and More!.

When a high-pressure pump operates in bypass for too long, the water circulating through the system can become dangerously hot. That heat can put unnecessary stress on pump components and potentially lead to premature wear, expensive repairs, and unwanted downtime. Fortunately, there’s a simple way to add an extra layer of protection: the CAT Pumps 7146 Thermo Valve.

CAT Pumps 7146 Thermo Valve

This compact component is designed to help keep excessive heat under control, automatically releasing overheated water when the temperature reaches approximately 130°F. That means you can spend less time worrying about what’s happening inside your pump and more time getting the job done.

Small Size. Serious Protection.

Don’t underestimate this little valve. The CAT Pumps 7146 performs an important job in helping protect your pressure-washing system during bypass operation.

Constructed from durable brass, the 7146 is built for demanding applications. It features a 1/4-inch NPT male inlet and 1/8-inch NPT female bleed port, with a maximum flow rating of 25 GPM and maximum inlet pressure of 125 PSI.

Whether you’re maintaining a commercial pressure washer, rebuilding a pump system, or keeping critical replacement parts on hand, the 7146 is the kind of component you want available before you need it.

Why Take the Chance?

A thermo valve might not be the first part you think about when maintaining your pressure washer—but that’s exactly why it’s easy to overlook. Waiting until excessive heat causes a problem can turn a relatively simple replacement into a much more expensive repair.

Why take that chance?

If your equipment relies on a CAT Pumps thermo valve, replacing a worn component with the correct part can help keep your system operating properly and your cleaning operation moving.

Get the Right Part from Us

When you’re working with pressure-washing equipment, the right part matters. You don’t want to waste time sorting through questionable substitutes when you could order the CAT Pumps 7146 Thermo Valve from a trusted source.

We make it easy to get the replacement parts you need so you can spend less time searching and more time working.

Protect your pump. Reduce unnecessary downtime. Keep your pressure washer ready to perform.

Order the CAT Pumps 7146 Thermo Valve from us today and give your equipment the temperature protection it deserves. Don’t wait for heat to become a costly problem—get your replacement valve now.

The post CAT Pumps 7146 Thermo Valve, A Small Valve That Can Help Protect a Big Investment. appeared first on ETS Co. Pressure Washers and More!.

It may not have the flashiest job, but the CAT Pumps 7204.4 Inline Filter Micro is the kind of small component you’ll be very happy to have when you need it.

Designed to help keep unwanted debris out of your system, the 7204.4 features an 80-mesh filter, 1/2″ NPT female connections, and a flow capacity of up to 10 GPM. It’s compact, practical, and ready to get to work.

CAT Pumps 7204.4

And there’s a nice little bonus: the clear lower body makes it easy to visually check the filter. No guessing. No unnecessary disassembly. Just a quick look to see what’s going on.

The 7204.4 is compatible with several CAT Pumps models, including the 2DX, 3DX, 2SF, 3SP, 4SF, and 66DX, making it a smart replacement to keep in your maintenance kit.

Don’t Wait Until You Need It

You know that feeling when a job is ready to go…and suddenly you realize you’re missing one tiny part?

Yeah. Nobody likes that.

Having the right replacement parts on hand can help keep your equipment—and your schedule—moving. At ETS Online, we make it easy to find the components you need without the scavenger hunt.

So if your pressure washer is running hard, give it the support it deserves.

Shop the CAT Pumps 7204.4 Inline Filter Micro at ETS Online and keep your equipment ready for the next job.

Small filter. Less hassle. More clean.

The post CAT Pumps 7204.4 Inline Filter: Small Part, Big Difference appeared first on ETS Co. Pressure Washers and More!.

CAT Pumps 48535 M25 x 110

At Shop Ets Online, we make it easier to find the parts you need by offering clearly identified replacement components online. If your equipment calls for CAT Pumps part number 48535, you can order the M25 x 110 plunger directly from us and keep your maintenance project moving.

Why Choose the CAT Pumps 48535 M25 x 110?

The CAT Pumps 48535 is a ceramic plunger identified by the size M25 x 110. It is associated with compatible CAT Pumps applications, including the 25PFR and 3560 pump series.

Because the correct component is essential to proper equipment maintenance, verifying the part number before ordering is important. If your pump documentation specifies 48535, the CAT Pumps M25 x 110 plunger provides a convenient replacement solution.

Instead of waiting until a worn component causes unnecessary downtime, keeping the correct replacement part available can help you respond quickly when maintenance is required.

Order CAT Pumps Part Number 48535 Online

Finding the right industrial replacement part shouldn’t require hours of searching. Shop Ets Online provides an easy way to locate CAT Pumps 48535 and review the available product information before placing your order.

The 48535 M25 x 110 designation gives you a specific reference when comparing your replacement requirements with your pump’s documentation. Always confirm your pump model and parts breakdown to ensure that CAT Pumps 48535 is the appropriate component for your application.

Keep Your Pump Maintenance on Track

High-pressure equipment works hard, and replacement components can eventually become necessary. A worn plunger can be a reason to inspect your pump and determine whether replacement parts are needed.

Having a CAT Pumps 48535 M25 x 110 replacement available can help simplify your maintenance process when the time comes. Rather than delaying a repair while searching for the correct component, you can order the part you need from Shop Ets Online.

Whether you’re performing scheduled maintenance or replacing a worn component, selecting the correct 48535 M25 x 110 plunger is an important step toward completing the job properly.

Why Shop Ets Online?

At Shop Ets Online, we understand that equipment maintenance depends on finding the right parts quickly. Our online store makes it convenient to search for specific manufacturer part numbers and order replacement components from wherever your work takes you.

When you need CAT Pumps part number 48535, you can turn to Shop Ets Online for a straightforward purchasing experience. We make it simple to locate the M25 x 110 plunger and get your order underway.

Get Your CAT Pumps 48535 Today

Don’t wait until a replacement is urgently needed. If your pump’s parts documentation calls for the CAT Pumps 48535 M25 x 110 plunger, order it from Shop Ets Online today.

Shop the CAT Pumps 48535 M25 x 110 and get the replacement component you need to keep your maintenance project moving.

Order today!

The post CAT Pumps 48535 M25 x 110: The Replacement Plunger You Need appeared first on ETS Co. Pressure Washers and More!.

Mi-T-M 3-0440 Pressure Washer Pump

Whether you’re a homeowner tackling weekend projects or a contractor who depends on reliable equipment every day, the Mi-T-M 3-0440 is designed to get your pressure washer back to peak performance.

Why Does a Pressure Washer Pump Fail?

The pump is the powerhouse behind every pressure washer. It creates the high-pressure water stream that blasts away dirt, grease, mold, and grime. Over time, internal components wear down from regular use, causing your machine to lose efficiency.

If your pressure washer is showing any of these symptoms, it may be time to replace the pump:

• Pressure won’t build or drops unexpectedly
• Water is leaking from the pump assembly
• The spray pulsates instead of remaining steady
• Loud grinding or unusual operating noises
• Longer cleaning times with poor results
• Frequent pressure fluctuations

Installing a genuine Mi-T-M 3-0440 replacement pump is often the quickest and most cost-effective solution.

Why Choose the Mi-T-M 3-0440 Pressure Washer Pump?

The Mi-T-M 3-0440 Pressure Washer Pump is an OEM replacement engineered to provide dependable performance at 4.0 GPM and 3,000 PSI. Unlike generic aftermarket pumps, the 3-0440 is manufactured to meet Mi-T-M’s original equipment standards for quality, durability, and reliable operation.

The Mi-T-M 3-0440 also replaces the discontinued 3-0410 pump, making it the current OEM replacement for compatible pressure washers.

Features of the Mi-T-M 3-0440

• Genuine OEM Mi-T-M replacement pump
• Delivers up to 3,000 PSI
• Produces 4.0 GPM for powerful cleaning
• Built for dependable, long-lasting performance
• Direct replacement for Mi-T-M 3-0410
• Designed for compatible commercial and residential pressure washers

When you install the Mi-T-M 3-0440 Pressure Washer Pump, you’re investing in a replacement that’s built to perform just like the original.

Restore Cleaning Power with the Mi-T-M 3-0440

Imagine cutting through years of built-up dirt on your driveway, restoring weathered decks, washing heavy equipment, or cleaning commercial properties with confidence. That’s the kind of performance the Mi-T-M 3-0440 Pressure Washer Pump is designed to deliver.

Instead of struggling with reduced pressure and longer cleaning times, replacing your worn pump with the 3-0440 can help restore the powerful spray your equipment was built to produce.

Why Buy Your Mi-T-M 3-0440 From Us?

When you’re investing in replacement parts, you want confidence that you’re getting the right product from a trusted source.

When you order your Mi-T-M 3-0440 Pressure Washer Pump from us, you’ll enjoy:

• Genuine OEM Mi-T-M replacement parts
• Competitive pricing
• Fast order processing
• Reliable customer support
• Quality products backed by years of industry experience

We’re committed to helping you keep your equipment operating at its best, whether you’re replacing a worn-out pump or performing preventative maintenance.

Don’t Let a Worn Pump Slow You Down

Every day you continue using a failing pump is another day of reduced cleaning performance, wasted time, and unnecessary frustration. Replacing your pump before it completely fails can help prevent costly downtime and keep your projects moving forward.

The Mi-T-M 3-0440 Pressure Washer Pump is the dependable OEM solution for restoring pressure, improving cleaning efficiency, and extending the life of your compatible pressure washer.

Order Your Mi-T-M 3-0440 Pressure Washer Pump Today

Don’t settle for weak pressure or unreliable performance. Upgrade your equipment with the genuine Mi-T-M 3-0440 Pressure Washer Pump and experience the power, reliability, and durability your pressure washer was designed to deliver.

If you’re looking for a trusted source for the Mi-T-M 3-0440, you’ve come to the right place. Order your 3-0440 Pressure Washer Pump today and get your pressure washer back to delivering professional-grade results.

Order today!!

The post Why the Mi-T-M 3-0440 Pressure Washer Pump Is the Smart Replacement for Restoring Your Pressure Washer appeared first on ETS Co. Pressure Washers and More!.

The UDOR UB351 Unloader Valve is designed to keep your pressure washer running smoothly by regulating pressure and safely redirecting water when you’re not spraying. That means less stress on your pump, more consistent cleaning power, and a longer service life for your equipment.

UDOR UB351 Unloader Valve

Whether you’re cleaning heavy equipment, washing fleets, or tackling tough commercial jobs, replacing a worn unloader valve is a simple upgrade that can make a noticeable difference in performance.

At Shop ETS, we carry genuine replacement parts like the UDOR UB351 so you can get back to work with confidence. Our team understands pressure washer equipment and is here to help you find the right part for your machine.

Don’t let a small component slow down a big job. Upgrade your pressure washer with the UDOR UB351 Unloader Valve and keep your equipment performing at its best.

Shop genuine UDOR UB351 replacement parts today at ShopETSOnline.com and keep the pressure where it belongs. Click here!

The post UDOR UB351 Unloader Valve: Why This Small Part Makes a Big Difference appeared first on ETS Co. Pressure Washers and More!.