At Checkout enter either:

BF15OFF – for 15% off your entire order

 Or

BFSHIP – for free shipping on your entire order.

Only one coupon may be used per order and each coupon is only valid once during this GREAT BLACK FRIDAY SALE!

 Don’t Delay.  WRITE A NOTE FOR YOURSELF TO  GO TO www.shopetsonline.com  on either Friday November 25^th or Saturday November 26^th 2011, and enter a code BF15OFF or BFSHIP to claim your savings.

The post Black Friday Sale! appeared first on ETS Co. Pressure Washers and More!.

Optional Accessories:
Chemical: CPCP-204404

Chewing Gum Remover is a readily biodegradable cleaning agent, developed specifically for the efficient removal of chewing gum. (4 x 5 liter bottles)
We stand behind our equipment and customers!
We run tests and tune-up the equipment. Ship to your facility and instruct you on the proper use of the equipment. We also cover any warranties under factory authorization.

The GUMMY Gum Removal Equipment Features:

• SPECS & FEATURES
• Electrical supply: 110V 1 phase 60 Hz
• Power: max. 1500 watt
• Water tank: .3 gallon
• Chemical tank: .26 gallon
• Boiler: stainless steel .6 gallon
• Boiler steam pressure: 79 psi
• Temperature: 320º Fahrenheit nominal
• Heating up time: approximately 6 minutes
• Cable Length: 16 feet
• Continuous operation
• Housing Material: A.B.S. Plastic
• Supplied with a full set of steam only accessories which include detail nozzle (A00802), small detail nylon brush (A00806),
• 2 x extension tube (A00808), 8 foot central connector hose & gun (A00832), triangular brush (A00803), window squeegee (A00804), floor brush (A00802), medium detail nylon brush (A00807), funnel (A00812)
• Variable steam adjuster
• Size: 12.5 inches x 14.1 inches
• Weight: 13 Lbs.

Our Price: $695.00 
Availability:: available for order
Product Code: MNOD-GUMMY
PRICE SUBJECT TO CHANGE.  PRICE VALID 10/18/2011

The post GUMMY Gum Removal Equipment appeared first on ETS Co. Pressure Washers and More!.

Portable Steam Cleaner & Vacuum. Guest  houses, small hotels and restaurants, fast food outlets, butchers, nursing homes, leisure centers, gymnasia and swimming pools – in fact anywhere requiring efficient cleaning and sanitizing. The new Osprey Americas is the answer to your cleaning problems. The Osprey Americas     combines all the inherent benefits of steam cleaning with the simultaneous use of a professional wet/dry vacuum cleaner, with optional chemical injection facility, leaving only dry sanitized surfaces behind.

FULLY TESTED BEFORE WE SHIP! WE ARE THE MASTER SERVICE / PARTS DISTRIBUTOR IN THE U.S.A.! WE STOCK ALL PARTS & ACCESSORIES!

GUMBUSTER: MNOD-OSPREY

The Osprey Americas Gum Removal Equipment Features:

• Electrical supply: 120V 1 phase 60 Hz
• Power: max. 1500 watts
• Water tank: 1.32 gallon
• Chemical tank: .1.32 gallon
• Boiler: .79 gallon, stainless steel
• Boiler steam pressure: 87 pound/square inch adjustable
• Temperature: 165° Celsius/ 329º Fahrenheit nominal
• Heating up time: approximately 12 minutes
• Industrial strength wet & dry vacuum: 1000 watts enables the simultaneous removal of moisture and the residue of grease and grime.
• Continuous operation
• Water spray proof electrical switches
• 13’ Power cord
• Supplied with a full set of steam & vac accessories
• 31” Long x 15” Wide x 41” High
• Weight 55 Lbs.
• Wheel Kit

Included FREE with this product:
•1 of AAA Gumfighter
•1 of PORTABLE GENERATOR BE-3100PR

List Price: $5,995.00
Our Price: $4,995.00 
You save $1,000.00!

Availability:: available for order
Product Code: MNOD-OSPREY
OSPREY AMERICAS PACKAGE
PRICE SUBJECT TO CHANGE.  PRICE VALID 10/18/2011

The post Osprey Americas Gum Removal Equipment appeared first on ETS Co. Pressure Washers and More!.

The SideWinder Model 105 represents the newest technology for flat surface cleaning accessories. The SideWinder 105, like earlier models, is ideal for use with both hot and cold pressure washers and cuts cleaning time and water usage for pressure washing of roofs, decks, sidewalks and other paved surfaces.

The SideWinder 105 is engineered and manufactured using high quality materials. The SideWinder 105 incorporates several new features!

Features

• Operates with cold or hot water up to 212o F
• Operates with pressure from 2,000 PSI up to 4,000 PSI
• Cleaning speed 200 sq ft / Min.
• Improved Cleaning Effect with the HydraFlow TM Cover – Fluted design creates a focused spray pattern at the external radius of the spray bar arc.
• Longer Life with an Upgraded SuperSwivel TM – Increased rear shaft hardness and LP seals throughout extending swivel life and reducing down time for repair and maintenance. Completely field reparable.
• Two Year Warrantee – Still the industry’s best and longest!
• The HydraMotion’s SideWinders use Military Specified Urethane, airframe grade aluminum and a Fuller Brush skirt assembly. All subassemblies are interchangeable from model to model for ease of upgrading, maintenance and repair.
• BENEFITS
• Lower Labor Costs
• Cuts Cleaning Times
• Reduces Zebra Striping
• Light Weight only 19 pounds

Our Price: $1,050.00
Sale Price: $830.00 Click to Purchase the SideWinder Model 105 Flat Surface Cleaner
You save $220.00!

The post 19″ SideWinder Surface Cleaner appeared first on ETS Co. Pressure Washers and More!.

Units, pricing and specs click here..

Pressure Washer Surface Cleaners

How To Deep Clean Large Flat Surfaces?

The solution is our flat surface cleaners

Pressure washer surface cleaners are powerful and reliable. They are used for high pressure cleaning driveways, concrete floors, parking lots, roofs, warehouses, boat ramps, garage floors, boat decks, and more. The benefits of using these products are clear: effective, shorter working times, enormous energy savings and long useful life due to their high industrial quality. You will be able to complete your power washing tasks in the shortest possible amount of time.

HOW DO SURFACE CLEANERS WORK?

High speed flat surface cleaners can consist of 2 or 3 (dual or tri arm) arms that spin in a counter clock wise direction for up to 1800 RPM (rotations per minute). At the end of each arm you will find a 1/4” MEG 25° spray nozzle that can cover the path from 16” to 30” diameter, depending on the size of the actual round housing. These cleaners can remove dirt for up to 15 times faster then the standard wands and 10 times faster than the water brooms. Operation: the user walks behind the unit holding the two handles from which one of them has a spray gun that works the same like any other pressure washer gun. The arms are connected to the shaft that is part of the spinning head (a mechanism that allows smooth rotation of the arm). These arms rotate/spin with the flow of the water (greater the water volume – the faster the spinning times), which creates a scrubbing action with the water coming out. The spray nozzles are only 1/2” to 2” away from the surface which allows greater cleaning capabilities. The edge of the housing and the brush skirt protect the surrounding area from over spraying. Some of our models come with the casters and some without. Units without the casters are designed to “hover” or “float” above the ground, so the maneuverability is not an issue. The greatest advantage of these machines is that they eliminate the “zebra” stripping usually found on driveways and sidewalks.

Some of the many uses for this pressure washer surface cleaner include:

Tennis Courts

Shuffleboard Courts

Basketball Courts

Roofs – Excellent Results with Clay Tile Roofs (Use Low Pressure on Shingle Roofs)

Pool Decks

Sidewalks

Driveways

Loading Docks

Warehouse Floors

Refrigerated Semi Trailer Floors

Operating Instructions of a Surface Cleaner

1) Connect to Pressure Washer.

2) Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use Teflon tape when installing nozzles.

3) Start Pressure Washer. The flat surface cleaner is ready for operation.

4) Walk slowly behind the flat surface cleaner, cleaning as you go. If striping occurs, slow down your pace.

5) Periodically check weep hole on bottom of swivel. Water will seep slowly; if water shoots out, stop and replace seals. Swivel assembly can be rebuilt.

6) For maximum effectiveness keep spray nozzles clean. If the machine vibrates, stop and clean spray tips.

7) Lubricate swivel with one squirt of good quality grease every 200 hours of operation or about once a month if used daily. A small amount of grease coming out of the bottom of the swivel is normal.

DO NOT ALLOW MACHINE TO REMAIN STATIONARY ON SOFT SURFACES, SUCH AS WOOD.

CAUTION: Striking any raised obstacle during operation will damage machine. If contact does occur and results in vibration when operating machine, STOP and replace spray bar. Continued operation could result in serious injury or damage to machine.

What are the Benefits of the Flat Surface Cleaner

How much time will this equipment actually save me (versus using the standard wand)?

The following comparison shows the time taken to clean a typical size driveway (400 sq. ft.) using 2 different components.

Flat Surface Cleaner – 10 minutes

Standard wand – 80 minutes
Is there any over spray?

The brush skirt will eliminate any over spray.

Is it easy to move and control?

The unit is easy to move around. (units equipped with casters turn 360 degrees)

How close does it get to walls?

With the surface cleaner, you’ve got full wall clearance.

Does it save water or does it use more? How much?

It uses the same amount produced by your pressure washer.

You state that it has “enormous energy savings”, how so?

You just walk behind it, v.s. if you clean with the standard wand you have to swing the wand 200-300 times to clean a typical size driveway.

Does it have a lot of maintenance/upkeep?

It has a minimum moving parts therefore very few possibilities that something will break down.

Units, pricing and specs click here..

The post Flat Rotary Surface Cleaners for pressure washers. appeared first on ETS Co. Pressure Washers and More!.