BLOG

Posted on

Mi-T-M – AGW-SH22-20M – Air Compressor / Generator / Welder

Mi-T-M – AGW-SH22-20M – Air Compressor / Generator / Welder

Mi-T-M - AGW-SH22-20M - Air Compressor/ Generator/ Welder
Mi-T-M – AGW-SH22-20M – Air Compressor/ Generator/ Welder

The Technical Specifications of the AGW-SH22-20M Mi-T-M Air Compressore / Generator / Welder:

  • Displacement/Engine 688cc Honda OHVwith electric start (cables are included, battery not included)
  • Rated Speed 3600 RPM
  • CFM @ 175 PSI 29.0
  • Tank 20-gallon receiver tank
  • Max. AC Output 5000 watts
  • Rated AC Output 4500 watts
  • Alternator Wattage 4500 watts
  • Frequency/Voltage 60Hz/120V/240V
  • Max. Amps (120V/240V) 41.5/20.8
  • Cont. Amps (120V/240V) 37.5/18.8
  • Receptacles (2) 120V, 20A GFCI duplex – 120V/240V, 20A twist lock
  • Duty Cycle (10 min. run time) 220A @ 40%, 190A @ 60%, 150A @ 100%
  • DC Voltage 50-220A working range
  • Weights & Dimensions
  • Net Weight 803 lbs.
  • Shipping Weight 870 lbs.
  • Length 47 in.
  • Width 24 in.
  • Height 50 in.

View Product Sheet for the AGW-SH22-20M: CLICK HERE

This  AGW-SH22-20M Offers the convenience of three machines in one, this new model combines a 220-amp arc welder, two-stage air compressor and a 5000-watt generator with a 688cc Honda OHV engine. You’ll save space and money and reduce your load capacity with the new  AGW-SH22-20M combination unit. With only one engine powering these components, you’ll also save time on serving parts and maintenance.

The AGW-SH22-20M in Operation Generator Mode:
AC current only · Selector switch set to idle down –engine will idle down when generator is not in use and tank pressure is 175 PSI · Switch is set to full throttle –engine will run full throttle continuously

The AGW-SH22-20M Welder Mode:
DC current only · Selector switch must be set to full throttle

Compressor Pump on this AGW-SH22-20M:
Splash lubricated cast iron crankcase to extend the hours of performance · Cast iron head for heat dissipation · Durable stainless-steel braided discharge hose · Quality pilot valve unloader

The Generator of this AGW-SH22-20M:
Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder
220 DCA arc welder · Amperage selection switch

Frame
Powder coated ASME coded 20-gallon receiver tank · 1/4-inch base plate to reduce vibration · 14-gauge powder coated four-piece belt guard

Components
Belt tightening system pulls engine straight to ensure constant belt alignment · Manual drain valves for proper maintenance · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · 10-gallon fuel tank capacity

*Equipped with 150-PSI maximum rated regulator.

List Price: $13,520.00
Our Price: $9,213.34 Click to order the AGW-SH22-20M
You save $4,306.66!
Availability:: available for order
Product Code: AGW-SH22-20M
Price subject to change on the AGW-SH22-20M

Posted on

XWAM8G35N Pressure Washer Pump from Annovi Reverberi

XWAM8G35N Pressure Washer Pump from Annovi Reverberi.

XWAM8G35N Pressure Washer Pump from Annovi Reverberi
XWAM8G35N Pressure Washer Pump from Annovi Reverberi

XWAM8G35N Pressure Washer Pump from Annovi Reverberi Features:

  • GPM 8
  • L/Min 30
  • PSI 3500
  • Bar 240
  • EBHP 18
  • Bore Dia mm 20
  • Stroke mm 19.8
  • Crankshaft ID Stamp 1

XWAM8G35N Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material over sized for strength and load disbursement. These XWAM8G35N pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.

AR Annovi Reverberi Pressure Washer Pump XWAM8G35N, 8 GPM @ 3500 PSI

List Price: $1,357.63
Our Price: $842.75 Click to order this pressure washer pump HERE.
You save $514.88!

Availability:: available for order
Product Code: XWAM8G35N
Price subject to change on the XWAM8G35N

 

Posted on

CAT Pump 10 Frame Piston Pump 1010

CAT Pump 10 Frame Piston Pump 1010

CAT Pump 10 Frame Piston Pump 1010
CAT Pump 10 Frame Piston Pump 1010

The CAT Pump 10 Frame Piston Pump 1010 Features:

  • Crankcase Capacity……………………………………….40 oz. (1.2 L)
  • Maximum Liquid Temperature …………………………160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Pressure Range ……………………….– 8.5 to +40 PSI (– 0.6 to +2.8 BAR)
  • Inlet Ports (1) …………………………………………….1″ NPTF (1″ NPTF)
  • Discharge Ports (3) ………………………………….3/4″ NPTF (3/4″ NPTF)
  • Shaft Diameter ……………………………………………. 0.984″ (25 mm)
  • Weight………………………………………………………34.6 lbs. (15.7 kg)
  • Dimensions……………………………..17.28 x 11.42 x 6.30″ (439 x 290 x 160 mm)
  • Flow………………………………………………………….13 GPM (49 L/M)
  • Pressure Range………………………………..100 to 700 PSI (7 to 50 BAR)
  • RPM………………………………………………………..900 RPM (900 RPM)
  • Bore…………………………………………………………….1.122″ (28.5 mm)
  • Stroke………………………………………………………….1.102″ (28 mm)
CAT Pump 10 Frame Piston Pump 1010
CAT Pump 10 Frame Piston Pump 1010

CAT Pump 1010 – 10 Frame Piston Pump, DS, 13/700, 900 RPM, BBCP/S-Valves, Standard Brass Model.

CAT Pump 1010 – 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.

CAT Pump 1010 – 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.

CAT Pump 1010 – 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.

Our Price: $2,400.00 Click here to order the 1010 Piston Pump
Call 1-877-824-7763 for a Better Price
Availability:: available for order
Product Code: 1010
Price subject to change on the CAT Pump 10 Frame Piston Pump 1010

Posted on

5315C-CHX – Hypro Pumps – PISTON PUMP

5315C-CHX – Hypro Pumps – PISTON PUMP

5315C-CHX - Hypro Pumps - PISTON PUMP
5315C-CHX – Hypro Pumps – PISTON PUMP

The 5315C-CHX – Hypro Pumps – PISTON PUMP Features:

  • Max. flow: 1.5 – 3.0 gpm/5.7 – 49.2 lpm
  • Max. pressure: 500 psi/34.5 bar
  • Max. rated speed: 1800 rpm
  • Max. fluid temperature: 140°F/60°C

Need parts for 5315C-CHX – Hypro Pumps – PISTON PUMP? Just type any part number from the following parts list into our search box for pricing and availability! 5300 SERIES PARTS LIST

The 5315C-CHX – Hypro Pumps – PISTON PUMP has the following technical specifications:

  • Port sizes: 1⁄2″ NPT inlet, 1⁄2″ NPT outlet
  • Shaft size: 5⁄8″ O.D. solid shaft or 5⁄8″ I.D. hollow shaft
  • Pump shaft rotation: bi-rotational
  • Cups: Leather (Buna-N and Teflon available)
  • Injector head available
  • Models require a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side
  • Weight: 10 lbs./4.5 kg

List Price: $489.00
Our Price: $327.32 Click to order the 5315C-CHX
You save $161.68!
Availability:: available for order
Product Code: 5315C-CHX
Price subject to change on the 5315C-CHX – Hypro Pumps – PISTON PUMP

Posted on

Sip into Summer Savings Every day in JUNE!

FREESHIP2013

Sip into Summer Savings Every day in JUNE!
5% – 15%* Off All Online Orders from $50 – $1000
Spend from $50.00 – $150.00 use Coupon 5percent get *5% OFF
Spend from $151.00 – $300.00 use Coupon 10percent get *10% OFF
Spend from $300.00 – $1000.00 use Coupon 15percent get *15% OFF

*Online Orders ONLY – Excludes New Machine Purchases and Already “Free Shipping”Items

 

Equipment Trade Service Co. web site, your 1 stop for:
Pressure Washers, Pressure Washer Parts, Pressure Washer Pumps, Hose Reels, Graffiti Removers, Cleaning Compounds, Wet/Dry Vacuums, Pressure Washer Accessories, and more!

CALL US TOLL FREE INSIDE THE UNITED STATES: 1-877-824-7763
OUTSIDE THE UNITED STATES CALL 1-610-583-7657
OR E-MAIL US AT ets@etscompany.com

 

Serving the Pressure Washer Industry since 1970!

Posted on

AR610 Electric Cold Pressure Washer from Annovi Reverberi

AR610 Electric Cold Pressure Washer from Annovi Reverberi.

AR610 Electric Cold Pressure Washer from Annovi Reverberi
AR610 Electric Cold Pressure Washer from Annovi Reverberi

This AR610 Electric Cold Pressure Washer from Annovi Reverberi Features:

  • Rated Flow 2.1 GPM
  • Working Pressure: 1300 PSI
  • Max Pressure: 1800 PSI
  • 2.0 HP Induction Motor
  • Pump Material: Brass
  • Inlet Pressure (PSI) 15-140
  • Power Cable w/ Plug (feet) GFCI 38.06
  • Textile Hose: 25 feet
  • Quick Coupling Gun/Hose/Machine
  • Internal Detergent System
  • Adjustable Spray Nozzle

The AR610 Electric Cold Pressure Washer from Annovi Reverberi has the following description:

› The AR610 has a Triplex pump with ceramic plungers, connecting rod system
› Automatic by-pass valve
› Pressure gauge
› Pressure adjustment
› This AR610 has a Built-in detergent suction
› Motor thermal protector
› Power supply cord length 5m is on the AR610
› Water filter
› H.P. soft type hose gun and lance
› Adjustable high/low pressure and fan/pencil jet spray head

List Price: $768.00
Our Price: $549.00 Click to order the AR610
You save $219.00!
Availability:: available for order
Product Code: AR610
Price subject to change on the AR610 Electric Cold Pressure Washer from Annovi Reverberi.

 

Posted on

AR630 Annovi Reverberi Electric Cold Pressure Washer

AR630 Annovi Reverberi Electric Cold Pressure Washer.

AR630 Annovi Reverberi Electric Cold Pressure Washer
AR630 Annovi Reverberi Electric Cold Pressure Washer

The AR630 Annovi Reverberi Electric Cold Pressure Washer Features:

  • The AR630 has a Triplex Pump With Ceramic Plunger – Ceramic plungers run cooler and last longer – Brass head is more durable than plastic components
  • This AR630 comes with Adjustable Hi-Low Pressure – Tailor the pressure to suit the task
  • Siphon Tube Allows Use Of Pressure Washer Safe Detergents – Automatically mixes proper water to detergent ratio
  • Versatile Vari-Spray Adjustable Spray Wand – Rotates from wide spray to pencil jet
  • Quick Connector Between AR630 Hose And Unit – Allows quick removal & detachment of hose, less wear on coupling
  • Automatic Safety Valve With Low Pressure By-Pass – Protects the pump by venting overheated recirculated water
  • Additional Features of this AR630 – Includes 25 foot hose, wand, and trigger gun with safety lock

 

The Description for the AR630 Annovi Reverberi Electric Cold Pressure Washer:

› Triplex pump with ceramic plungers, connecting rod system
› Automatic by-pass valve
› Pressure gauge
› Pressure adjustment
› Built-in detergent suction
› Motor thermal protector
› Power supply cord length 5m
› Water filter
› H.P. soft type hose gun and lance
› Adjustable high/low pressure and fan/pencil jet spray head

Technical Specifications the AR630 Annovi Reverberi Electric Cold Pressure Washer:

  • Model Number: AR630
  • UPC: 851243126701
  • Manufacturer: AR
  • Made in USA: No
  • Motor Type: Induction
  • Motor Voltage: 120-Volt Single-Phase
  • Amps: 19 Amps
  • Power Cord Length: 20 ft GFCI
  • Pump Brand: AR
  • Pump Type: Triplex Plunger
  • Adjustable Pressure: Yes
  • Chemical Injection: Siphon Tube
  • Frame Type: Hand Carry
  • Wheels: Not Applicable
  • Hose Length: 25 ft
  • Hose Material: Rubber
  • Hose Diameter: 1/4 Inch
  • Hose Connections: Threaded
  • Spray Gun Connection: Threaded
  • Spray Gun Grade: Professional
  • Spray Gun Wand: Adjustable
  • Spray Tips: Not Applicable
  • Weight: 49.3 Lbs. (22.36 kilograms)
  • Dimensions: 15L x 9.5W x 9H – (38.10 x 24.13 x 22.86 cm)
  • Mfr Consumer Warranty: 1 Year
  • Mfr Commercial Warranty: 1 Year

List Price: $978.00
Our Price: $699.00 Click HERE to purchase the AR630
You save $279.00!
Availability:: available for order
Product Code: AR630
Price subject to change on this Electric Cold Pressure Washer from Annovi Reverberi model # AR630

Posted on

BE 85.205.026 – 36″ GUN & WAND KIT for your Pressure Washer

BE 85.205.026 – 36″ GUN & WAND KIT for your Pressure Washer.

BE 85.205.026 - 36" GUN & WAND KIT for your Pressure Washer
BE 85.205.026 – 36″ GUN & WAND KIT for your Pressure Washer

BE 85.205.026 – 36″ Gun and Wand assembly with male plug. 4000 PSI Max, 8 GPM Max, 300 Deg. F Gun with 4000 PSI Max, 12 GPM Max, 300 Deg. F Standard insulated wand.

*3/8″ PLATED STEEL PLUG

Pro-Quality Spray Gun and Wand Assembly Our pro-quality Spray Gun and Wand Assembly features heavy-duty construction and deeply discounted pricing.
It’s ideal for virtually all hot and cold water pressure washers!
(This item is also known as item BE 85.205.026)
This complete spray gun and wand assembly features:
* quality steel wand
* easy-to-grip spray gun with trigger lock
* 36″ length for excellent reach
* new quick-connect coupler at end of wand, which that makes it very easy to attach spray nozzles!
* use with max. pressure of 4,000 PSI, 8 GPM and up to 300F degrees
* comes packaged in a box

List Price: $44.90
Our Price: $34.86 Order the BE 85.205.026 Gun & Wand Kit Click here.
You save $10.04!
Availability:: available for order
Product Code: BEWA-85.205.026
The price of the  BE 85.205.026 Gun & Wand Kit for your pressure washer is subject to change.

 

Posted on

1XP200.03DC CAT Pump Series portable extractor pump

1XP200.03DC CAT Pump Series portable extractor pump.

1XP200.03DC CAT Pump Series portable extractor pump
1XP200.03DC CAT Pump Series portable extractor pump

The 1XP200.03DC CAT Pump Series portable extractor pump Features:

  • PUMP MODEL CAT Pump 1XP200.03DC Series portable extractor pump
  • Max Flow: 2.30
  • Min Pressure of the CAT Pump 1XP050.03DC: 100
  • Max Pressure: 150
  • Inlet Port Size: .38
  • Discharge Port Size: .38
  • RPM on this CAT Pump 1XP200.03DC: 1750
  • Drive Type(s): Direct

The 1XP200.03DC CAT Pump Series portable extractor pump description:

This is a compact, direct drive (1750 RPM) motorized CAT Pump 1XP200.03DC Series portable extractor pump unit used in portable extractors, electric truck mounts, misting, hydrostatic testing, and wash down applications. It is constructed of a plated aluminum crankcase body, 304 stainless steel valve assemblies, solid ceramic plungers, special blend fluorocarbon seals and o-rings. Pump features a patented grease-less design, 100% sealed wet end and keyed shaft so pump can operate clock-wise or counterclockwise rotation. The CAT Pump 1XP200.03DC is Equipped with a DC permanent magnet, ODP motor.

Cat Pumps is proud to announce the release of our latest pump innovation, the new 1XP200.03DC series pumps. Specifically built for the portable extractor market, the new 1XP series pumps were designed and tested to be the most reliable portable extractor pump on the market. With a performance window of 2.30 gpm and 150 psi, the 1XP200.03DC series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.

The 1XP200.03DC series is equipped with a patented grease-less design and innovations to improve product life, serviceability, and performance. This and an overall compact package give our customers the flexibility when designing their own equipment. All this backed by Cat Pumps leading customer service and product availability.

List Price: $590.00
Call Us at 1-877-824-7763 for a better price we can’t list online

Or click here to purchase online.  Add it to your cart to see discounted price. 1XP200.03DC

Availability:: available for order
Product Code: 1XP200.03DC
Price subject to change on the 1XP200.03DC CAT Pump Series portable extractor pump.