HK125FW BE Portable Heater Kerosene Forced Air

HK125FW BE Portable Heater Kerosene Forced Air

HK125FW BE Portable Heater Kerosene Forced Air
HK125FW BE Portable Heater Kerosene Forced Air

This larger more powerful kerosene forced air portable heater from BE and ETS Company online is perfect for your medium to large size work spaces that need an extra blast of heat during this cold season.  The HK125FW is economical and super fast at heating up these areas that are a little too large for the smaller portable space heaters.  The HK125FW Kerosene heater will keep your employees warm and toasty with keeping an eye on your wallet with fuel consumption to heat output being very attractive.

The HK125FW has the following Specifications:

  • Heat Output 125,000 BTU
  • Fuel Tank Capacity 10.0 gallons
  • Heating Area 3100 sq ft.

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 13-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head of the BE Portable Heater  Kerosene Forced Air – HK125FW: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components for the BE Portable Heater  Kerosene Forced Air – HK125FW: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-out

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

The HK125FW is For use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change for the BE Portable Heater  Kerosene Forced Air – HK125FW without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

List Price: $508.00
Our Price: $338.58 Click here to order the HK125FW Portable heater from BE
You save $169.42!
Availability:: available for order
Product Code: HK125FW
Price subject to change

HL125F BE Portable Heater Propane Forced Air

HL125F BE Portable Heater Propane Forced Air.

HL125F BE Portable Heater Propane Forced Air
HL125F BE Portable Heater Propane Forced Air\

Do you have a cold farm barn or construction site?  The HL125F BE Portable Heater Propane Forced Air is perfect for you.  This powerful yet compact Propane heater will warm up that barn or construction site fast and efficiently.  Don’t worry about the noise, the HL125F BE Portable Heater Propane Forced Air is as quiet as it is warm.  Just be sure you have proper ventilation for the running of this propane heater, and you and your animals and workers will be warm and happy through the cold months.

The Technical specifications of the HL125F BE Portable Heater Propane Forced Air:

  • Heat Output 125,000 BTU
  • Fuel Propane
  • Heating Area 3100 sq. ft.

Frame of the HL125F BE Portable Heater: Heavy-duty steel construction · Easy-lift handle for portability at home or on the job site · Adjustable height angle for heat where you need it

Components on the BE Portable Heater Propane Forced Air – HL125F: One touch ignition and heat control for easy operation · High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector – connects heater to propane tank via a supply hose

Heat Output: Adjustable thermostat

The BE Portable Heater Propane Forced Air – HL125F is ideal for use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change without notice on the BE Portable Heater Propane Forced Air – HL125F. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

List Price: $318.00
Our Price: $211.94 Click the link to order this HL125F BE Portable Heater
You save $106.06!
Price subject to change on this HL125F Be Portable heater.

HLTT32 BE Portable LPG Tank Top Heater

HLTT32 BE Portable LPG Tank Top Heater.

Backyard parties in the early to mid fall can be cold.  Why not heat up that backyard space with the HLTT32 BE Portable LPG Tank Top Heater.  This powerful but compact LPG Tank Top heater is the right product for the job!  Keep your family and friends toasty warm with the HLTT32 BE Portable LPG Tank Top Heater, while keeping the party going outside all Fall!

HLTT32 BE Portable LPG Tank Top Heater
HLTT32 BE Portable LPG Tank Top Heater

The HLTT32 BE Portable LPG Tank Top Heater has the following specifications:

  • Heat Output 32,000 BTUP
  • Radiant Tank Top
  • Heating Area 800 sq. ft.

The HLTT32 BE Portable LPG Tank Top Heater has the following Features:

-Cast aluminum manifold.
-Variable heat control valve.
-Safety shut-off valve.
-Standard P.O.L. tank connection.
-Clean, quiet, instant radiant heat.
-Double tank top.
-Rear burner safety guard.
-Fuel: Propane.
-Ignition Type: Match Light.
-Heat Settings: 6.
-Suggested Cylinder: 20 Gallon.

BE Portable LPG Tank Top Heater – HLTT32 Construction:
-Construction Material: Cast aluminum.-Heavy-duty construction.

List Price: $158.00
Our Price: $105.30 Click the link to order the HLTT32 LPG Tank Top Heater
You save $52.70!
Availability:: available for order
Product Code: HLTT32
Price subject to change on the HLTT32 BE Portable LPG Tank Top Heater

ETS Company & Shopetsonline.com Closed due to In-climate weather

ETS Company, Shopetsonline.com, Taginator.com, Annovi-Reverberi.net, hypropump.net and ETSPressurewashers.com will be closed Monday due to the in-climate weather created by Hurricane Sandy.  All orders and shipments will resume when the weather breaks.  We will post up to date information as we have it.  Thank you for your support and understanding in this matter.

ETS Company

HK070F BE Portable Heater Kerosene Forced Air

HK070F BE Portable Heater Kerosene Forced Air.

With winter coming, it’s time to get ready and heat them cold work spaces!  The HK070F Portable Kerosene Forced Air Heater from BE Pressure is the perfect choice to warm up those cold garages and work spaces that are properly ventilated.  The HK070F is powerful enough to warm small to semi large areas, yet quiet enough not to be a distraction.

HK070F BE Portable Heater Kerosene Forced Air
HK070F BE Portable Heater Kerosene Forced Air

The technical specifications of the HK070F BE Portable Heater Kerosene Forced Air:

  • Heat Output 70,000 BTU
  • Fuel Tank Capacity 5.0 gallons
  • Heating Area 1700 sq ft.

BE Portable Heater  Kerosene Forced Air – HK070F

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 13-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head of the BE Portable Heater  Kerosene Forced Air – HK070F: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components for the BE Portable Heater  Kerosene Forced Air – HK070F: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Over sized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-out

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change for the BE Portable Heater  Kerosene Forced Air – HK070F without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

List Price: $358.00
Our Price: $238.60 Click to order the HK070F Heater from BE
You save $119.40!
Availability:: available for order
Product Code: HK070F
Price subject to change.  Price Valid on the HK070F Portable heater 10/22/2012

HL060F BE Portable Heater Propane Forced Air

HL060F BE Portable Heater Propane Forced Air.

HL060F BE Portable Heater Propane Forced Air
HL060F BE Portable Heater Propane Forced Air

Time to think about heating up those construction sites and other work places this winter with the portable forced air propane heater from BE.  The HL060F is a high powered, but compact heating machine ideal for small to medium size areas that need a blast of heat in this cold weather.

BE Portable Heater Propane Forced Air – HL060F

Frame: Heavy-duty steel construction · Easy-lift handle for portability at home or on the job site · Adjustable height angle for heat where you need it

Components on the BE Portable Heater Propane Forced Air – HL060F: One touch ignition and heat control for easy operation · High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector – connects heater to propane tank via a supply hose

Heat Output: Adjustable thermostat

The BE Portable Heater Propane Forced Air – HL060F is ideal for use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change without notice on the BE Portable Heater Propane Forced Air – HL060F. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

The HL060F BE Portable Heater Propane Forced Air has the following technical specifications:

  • Heat Output 60,000 BTUP
  • Fuel Propane
  • Heating Area 1500 sq. ft.

List Price: $256.00
Our Price: $170.62 Click the link to order the HL060F
You save $85.38!
Availability:: available for order
Product Code: HL060F
Price subject to change.  Price valid on the HL060F Portable Propane Forced Air heater from BE 10/15/2012

HLTT16 BE Portable LPG Tank Top Heater

HLTT16 BE Portable LPG Tank Top Heater.

It’s getting cold again, time to heat up those back yard parties, and heat-less work places with a small but powerful LPG Tank Top Heater from ETS Company.  The HLTT16 BE Portable LPG Tank Top Heater is the perfect small heater for the job!

HLTT16 BE Portable LPG Tank Top Heater
HLTT16 BE Portable LPG Tank Top Heater

BE Portable LPG Tank Top Heater – HLTT16 Features:

-Cast aluminum manifold.
-Variable heat control valve.
-Safety shut-off valve.
-Standard P.O.L. tank connection.
-Clean, quiet, instant radiant heat.
-Single tank top.
-Rear burner safety guard.
-BTU’s: 9-12-15,000.
-Fuel: Propane.
-Ignition Type: Match Light.
-Heat Settings: 3.
-Suggested Cylinder: 20 Gallon.

BE Portable LPG Tank Top Heater – HLTT16 Construction:

-Construction Material: Cast aluminum.-Heavy-duty construction.

BE Portable LPG Tank Top Heater – HLTT16 Technical Specifications:

  • Heat Output 16,000 BTUP
  • Radiant Tank Top
  • Heating Area 400 sq. ft.

List Price: $74.00
Our Price: $49.32 Click the link to order the HLTT16 Heater
You save $24.68!
Availability:: available for order
Product Code: HLTT16
Price subject to change.  Price Valid on the HLTT16 BE Portable LPG Tank Top Heater 10/12/2012

CAT Pump 66DX40G1I – Direct-Drive Plunger Pump

CAT Pump 66DX40G1I – Direct-Drive Plunger Pump.

CAT Pump 66DX40G1I - Direct-Drive Plunger Pump
CAT Pump 66DX40G1I – Direct-Drive Plunger Pump

The CAT Pump 66DX40G1I – Direct-Drive Plunger Pump Features:

  • Flow……………………………………………….4.0 GPM (15.0 L/M)
  • Pressure Range ……………………100 to 4000 PSI (7 to 275 BAR)
  • Stroke………………………………………………..0.449″ (11.4 mm)
  • Max. RPM ……………………………………3400 RPM (3400 RPM)
  • Engine Mounting Face …………………………….6.5″ (6.5″)
  • Inlet Pressure Range ………….Flooded to 75 PSI (Flooded to 5.25 BAR)
  • Bore…………………………………………………..0.551″ (14 mm)
  • Shaft Diameter (Hollow)……………………………..1″ (25.4 mm)
  • Max. Liquid Temperature ………………………140°F (60°C)
  • Crankcase Capacity …………………………….18 oz. (0.55 L)
  • Inlet Ports (2) ………………………………..1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2) ……………………….3/8″ NPTF (3/8″ NPTF)
  • Weight…………………………………………..26.15 lbs. (11.9 kg)
  • Dimensions (Pump Only) ……..10.0 x 9.96 x 6.38″ (254 x 253 x 162 mm)

CAT Pump 66DX40G1I – Direct-Drive Plunger Pump, 4.0/4000, Hollow 1″ Shaft w/Modular Unloader, Chemical Injector, BB/S-Valves.

• The CAT Pump 66DX40G1I has a Triplex plunger design that  provides a smooth liquid flow.
• Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
• Compact flange mount permits easy, direct mounting to most gas engines of this CAT Pump 66DX40G1I.
• Modular Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
• Fixed Chemical Injector is standard and mounts directly onto Unloader to provide cleaning flexibility.

ETS BOLT-N-GO PUMP SPECIAL! THIS PACKAGE CONSISTS OF ONE CAT 66DX40 PUMP WITH UNLOADER AND PLUMBING (THERMAL RELIEF VALVE, GARDEN HOSE FITTING AND HIGH PRESURE QUICK COUPLER PLUG), 4 GPM @ 4000 PSI, IDEAL FOR 9, 11 OR 13 HP ENGINES, WITH CAT PULSAR3KHPEZ UNLOADER.

List Price: $1,225.00 Click the link to ORDER TODAY or…
Call 1-877-824-7763 {Smart Phones Click to Call}
For a BETTER PRICE WE ARE NOT ALLOWED TO LIST ONLINE for this CAT Pump 66DX40G1I – Direct-Drive Plunger Pump
Availability:: Available for Order
Product Code: 66DX40G1I
Is this CAT Pump 66DX40G1I not the correct CAT Plunger Pump for your pressure washer?  Click the link to see more CAT Plunger Pumps from ETS Company.
Price subject to change.   Price valid on this CAT Pump 66DX40G1I – Direct-Drive Plunger Pump 10/08/2012.