Features

Triplex Plunger Pump
Maximum Volume: 4.0/3.5 GPM
Maximum Discharge Pressure: 1100/1500 PSI
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1750/1450 RPM
Minimum Horsepower Requirements: 3.6 bhp (multiply by 1.5 for gas engines)
Bore: .787″ (20mm)
Stroke: .394″ (10mm)
Crankcase Capacity: 15.2 oz. (nondetergent SAE 30W oil)
Maximum Fluid Temperature: 165 degrees F.
Inlet Port Thread: 1/2″ FPT
Discharge Port Thread: 3/8″ FPT
Shaft Diameter: .945″ (24mm)
Dimensions: 9.3″ x 8.3″ x 5.4″
Weight: 18.7 lb.
Forged brass manifold with an exclusive lifetime warranty
Die cast, anodized aluminum oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original InterPump unitized stainless steel Kit 1 inlet and outlet valves
Standard 24mm soid shaft for pulley mounting
Flex coupling and bell housing available for direct drive
Ideal for all general cleaning/washing applications
Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter

The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, Gernal Pump/US warrants allforged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
The following items are NOT warranted, due to matters beyond General Pump/US control.
Normal wear and tear to parts that are considered standard wear parts.
Defects caused by the fault or negligence of the buyer or third party.
Use of unauthorized repair parts, or;
modifications made by the customer.

List Price: $585.02

You save $134.85!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

July 18, 2011October 20, 2011

HYPRO Car Wash Plunger Pump 2535s

HYPRO CAR WASH PLUNGER PUMP

The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.

38GPM
1200 Max PSI
800 Max RPM
oil bath crankcase
ceramic plungers
35mm OD solid shaft
1 1/2″ NPT inlet port
1″ NPT outlet port

List Price: $6,424.00

Our Price: $4,108.03

You save $2,315.97!

CLICK HERE TO PURCHASE

July 18, 2011October 20, 2011

Tagaway Graffiti Remover – Removes Graffiti from School Crossing Sign

Video from Equipment Trade Service Company Inc. for the product Tagaway. Tagaway® Graffiti Removal Information Tagaway is a biodegradable liquid graffiti remover that is typically purchased in 32oz. trigger spray bottles. (Although also packaged in gallons and 5 gallon pails) You simply spray Tagaway onto the painted or smooth surfaces such as a painted wall, stop sign, locker or desk, then wiped off 10 to 15 seconds later with a dry cloth. If you wish to rinse the surface you just removed graffiti from, do so after you have removed the graffiti.. Tagaway is great for removing paint and graffiti from Smooth Surfaces like Lockers, Trash Bins, Street Signs, Commercial Vehicles, Painted Masonry, Aluminum Surfaces, Railroad Cars, Postal Boxes, Glass & Wood, Public Bathrooms and many other applications. Currently Tagaway is used by Public Works, Housing Authorities, Parks/Forest, Highway Authorities, Mass Transit Authorities, School Districts, Municipalities, Trucking Companies, Military Bases, Shopping Malls, U.S. Postal Office, and Vending Machine Companies both in the United States and Canada.

TAGAWAY 32oz. Graffiti Remover

TAGAWAY Graffiti Remover 1 GALLON

TAGAWAY Graffiti Remover 5 GAL.

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

July 18, 2011October 20, 2011

AR (annovi reverberi)XW-M26.20 6.87 GPM @ 2900 PSI Pump

AR (annovi reverberi) XW Series Pumps – Plunger Pumps are designed for high-pressure industrial washing applications. The AR (annovi reverberi) XW Series Pumps are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components of AR (annovi reverberi) XW Series Pumps include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. AR (annovi reverberi) XW Series Pumps valve cages of special designed Ultra-Form provide positive seating and extended life. AR (annovi reverberi) XW Series Pumps two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These AR (annovi reverberi) XW Series Pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft. Flows: 3.96 to 13 GPM Pressure to: 4350 PSI Speeds: 500, 1000, 1450, 1750 rpm Shaft Styles: Solid Shaft 24mm

List Price: $1,019.94

Our Price: $627.88

You save $392.06!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

July 18, 2011October 20, 2011

CAT Pump 2DX15ES.MIST Plunger

CAT Pump 2DX15ES.MIST Plunger

List Price: $649.00

Our Price: $388.99

You save $260.01!

CAT Pump 2DX15ES.MIST Plunger Features:

Triplex plunger design provides a smooth liquid flow.
Specially formulated Hi-Pressure Seals and concentrically
ground ceramic plungers assure maximum seal life.
Stacked Stainless steel valve design for long life and
easy servicing.
Ultimate compact, direct-drive unit for maximum portability.
Standard Integral Regulator with built-in by-pass
assures system pressure control and pump protection.

CAT Pump 2DX15ES.MIST Plunger Specs:

Inlet Pressure Range ………………………..Flooded to 60 PSI (Flooded to 4 Bar)
Bore ………………………………………………………………..0.630″ (16 mm)
Max. Liquid Temperature ……………………………………140°F (60°C)
Crankcase Capacity………………………………………….8.5 oz. (0.25 L)
Inlet Ports (1) ……………………………………………..3/8″ NPTF (3/8″ NPTF)
Discharge Port (1) ………………………………………3/8″ NPTM (3/8″ NPTM)
Shaft Diameter……………………………………………………..5/8″ (15.8 mm)
Weight ………………………………………………………….10.7 lbs. (4.9 kg)
Dimensions ……………………………………..7.75 x 7.12 x 6.29″ (197 x 180 x 160 mm)
NOTE: 3450 RPM models with 1725 RPM motor deliver half original flow.

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

July 15, 2011October 20, 2011

CAT Pump 2SF22EL

CAT PUMP 2SF22EL Plunger Pump

CAT PUMP 2SF22EL Plunger, 2.2/2000, 1725 RPM, Elec 5/8″ shaft, w/Unloader, BB/S-Valves.

2.2 GPM
2000 PSI
1725 RPM
OIL CAPACITY 11.83 OZ
REGULATING UNLOADER
5/8″ HOLLOW SHAFT ELECTRIC WITH BOLT MOUNT
CAT PUMP 2SF22EL FEATURES• Ultimate portability – less than 11 pounds – less than 10” long.
• Unique spring loaded inlet valves and the flow through ceramic plungers provides a smooth, steady flow.

• Optional 3450 or 1725 RPM models for gas or eletric drive.

• Regulating Unloader is standard on each pump to assuresystem pressure control and pump protection.

• Special HT and FPM seals and FPM or EPDM O-Rings for liquid compatibility.
COMMON CAT PUMP 2SF22EL SPECIFICATIONSInlet Pressure Range..(Standard) Flooded to 75 psi (Flooded to 5.25 bar)
………………………………(Hi-Temp) 30 to 75 psi (2.1 to 5.25 bar)

Bore……………………………………… 0.708” (18 mm)

Max. Liquid Temperature.(Standard) 160°F (71°C)

………………………………(Hi-Temp) 190°F (88°C)

Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.

Crankcase Capacity……………….. 11.83 oz. (.35 l)

Inlet Ports (1)…………………………. 3/8” NPTF (3/8” NPTF)

Discharge Ports (2)…………………. 3/8” NPTF (3/8” NPTF)

By-Pass Ports (1)…………………… 1/4” NPTF (1/4” NPTF)

Weight (Pump Only)……………….. 10.6 lbs. (4.8 kg)

Dimensions (Pump Only)…………. 9.13 x 6.65 x 6.50” (232 x 169 x 165mm)

CAT Pump 2sf22EL Pump Breakdown CLICK HERE

Service Manual for CAT Pump 2sf22EL Click Here

List Price: $644.66

Our Price: $496.07 CLICK HERE TO PURCHASE

July 15, 2011October 20, 2011

New WordPress Graffiti Removal Site for Taginator.com

We here at Taginator strive to make your online experience for our graffiti removal products the best it can be. To keep up with the times we are now offering a wordpress version of our Taginator graffiti remover site as well as this standard site for you to choose from. Both versions of the site have all identical information, the only difference is the functionality of each one. Either graffiti removal site will work on most computer systems, operating systems, web browsers, smart phones, pads and internet connections.

To access our New WordPress Graffiti Removal Site Click Here or the photo to the left.

Recommended for ( but not limited to):

Smart Phones, Pads, PC, Laptops / FIOS, DSL, Cable *NOT Recommended for Dial UP

July 15, 2011October 20, 2011

New York State D.O.T. Graffiti Removal Bid Specifications

From https://www.nysdot.gov

ITEM 11559.920X M – GRAFFITI REMOVAL FROM UNTREATED SURFACES

Pag e 1 of 6 6/9/04
DESCRIPTION This work shall consist of removing graffiti by the methods described in this

specification.
MATERIALS All materials and equipment shall be subject to the Engineer=s approval before

any work can begin.

Abrasive material for blast cleaning shall meet the requirements of §572-2.01, Abrasive for

Blast Cleaning.

POWER WASH Soluble, abrasive blast media shall be a large crystal sodium bicarbonate or a

magnesium sulfate based media. Solubility of the media in water shall be 8.6 g/100 ml.

The equipment with the media shall be a soluble media injector type power washer. The

Contractor shall submit catalog cuts or other documentation for all equipment proposed for use

in this work.
SOLVENT WASH The cleaning compound shall be a blend of an organic solvent of emulsifiers

and surfactants. It shall be a bio-degradable water based mixture developed from non-toxic and

non-corrosive substances. This may be a soybean solution or other, satisfactory to the Engineer.

Mineral spirits are also acceptable for this usage.

The cleaner shall lift graffiti from the substrate surface, and emulsify and dissolve the paint

constituents; pigments; oils; binders and fillers. The material(s) used shall not damage, mar or

reduce the reflectivity of the substrate, when used on a sign panel. Acceptance of the cleaning

compound will be based on the manufacturer=s certification that the material conforms to the

requirements of this specification.

ITEM 11559.920X M – GRAFFITI REMOVAL FROM UNTREATED SURFACES

Some acceptable solvents include the following: Orange Magic Cleaner, as manufactured by Orange

Power, 257-02 Craft Ave., Rosedale, NY 11422; 3M Citrus Base Natural Cleaner, manufactured by 3M

Adhesives, Coatings and Sealers Division, St. Paul, Minnesota 55144; Enviro-Solutions Paint Stripper &

Graffiti Remover, by RCI Trading, P.O.Box 1789, Englewood, CO. 80150-1789; SOY solv, 6154 N CR

33, Tiffin, OH 44883; EZ Solv, by Gemtek, 3808 North 28th Street, Phoenix, AZ, 85017, (800) 331 –

7022; Taginator, by Equipment Trade Service, 20 E. Winona Ave, Norwood, PA 19074; Graffiti Free

Cleaner, Enviro-Northeast, PO Box 975 Highland Lakes N.J. 07422; or Mineral Spirits.

CONSTRUCTION DETAILS

All work must conform to the OSHA standards referred to in subsection 107-05 of the Standard

Specifications.

Unless otherwise directed by the Engineer, the following methods shall be used to remove

graffiti from various surfaces. If one of these prescribed methods is used, and the graffiti still

remains visible, the contractor shall use an alternate method approved by the Engineer. Painting

over graffiti is the preferred option on previously painted surfaces, and where solvents were

unsuccessful at removing graffiti.

Unless otherwise noted or directed by the Engineer, graffiti shall be removed within five (5)

working days of written notification. If a lift device will be necessary, the removal date will be

extended to ten (10) working days.

GRAFFITI SURFACE	SUGGESTED GRAFFITI REMOVAL METHOD
Steel (smooth, non-porous)Wood (painted or unpainted)	Solvent Wash with Enviro-Solutions Paint Stripper &Graffiti Remover; SOYsolv; Mineral Spiritsor Painting Over Graffiti or Power Washing
Brick, Stone, Concrete, Pavingblocks (porous, unpainted)	Solvent Wash with Taginator, or Power Washing,or Painting Over Graffiti or Abrasive Blasting
Painted masonry	Painting Over Graffiti or Power Wash
Sign Panel Faces & Aluminum(unpainted mill finish or anodizedfinish)	Solvent Washing with Enviro-Solutions Paint Stripper &Graffiti Remover; SOY solv; EZ Solv or Mineral Spirits.

PRIORITY GRAFFITI REMOVAL

Graffiti of a particularly offensive nature, in the opinion of the Engineer, shall be removed by the ITEM 11559.920X M – GRAFFITI REMOVAL FROM UNTREATED SURFACES

contractor within one (1) day after written notification of the existence of such graffiti. This

shall be called PRIORITY GRAFFITI REMOVAL, and will be paid at twice the bid price for the

removal method(s) selected.

POWER WASHING GRAFFITI SURFACES

All graffitied surfaces shall be cleaned with a soluble, abrasive blasting media applied with a

soluble media injector at 20,500 kPa, 19 L per minute or a compressed air delivery system at 690

kPa, 140 L/second, whichever is satisfactory to the Engineer. No particulate matter of any nature

shall be permitted to remain on the cleaned surface. After cleaning, the surface shall be rinsed

with tap water applied with a power washer at 6900 kPa. All visible media shall be removed

SOLVENT WASHING GRAFFITI SURFACES

Pre-Cleaning Materials.

A wet, non-abrasive cleanser is recommended. This cleanser shall not contain strong solvents or

alcohols.

Pre-Cleaning Procedure.

Cleanse the surface of loose dirt particles with clean water.

Use a soft sponge or brush to wash the graffitied surface with detergent and water. Avoid

scrubbing the surface unnecessarily. After the cleaner has been utilized, apply a steady stream of

water on the cleaned surface to wash the dirt particles away.

Allow to dry.

Cleaning Procedure.

The Contractor shall supply the instructions of the cleaning procedure, to the Engineer, at least

two weeks prior to starting this work. Graffiti Removal material shall be applied to surfaces as

per the manufacturer’s instructions. Graffiti Removal material shall not be applied to silk screen

processed areas.

After the solvent is applied, the surfaces shall then be wiped with a non-abrasive material.

The wiped surfaces shall then be rinsed with a water wash.

The cleanliness of the surfaces is subject to the approval by the Engineer.

After rinsing, the Contractor shall repeat the cleaning process in areas where graffiti is still

visible. If the second cleaning process fails to remove the graffiti to the Engineer=s satisfaction,

the equipment and methods used by the Contractor will again be subject to review and approval

by the Engineer.

ITEM 11559.920X M – GRAFFITI REMOVAL FROM UNTREATED SURFACES

Cleaned surfaces shall bear no evidence of graffiti. The cleaning of the graffiti image shall be

feathered out by using light pressure at the end of the stroke to promote uniformity on the

surrounding surface.

July 15, 2011October 20, 2011

LANDA SLX- SLT Portable Hot Water Pressure Washer

The Only Portable Hot Water Pressure Washer

that Delivers 200°F Cleaning at up to 10 GPM

Dual-Gun Ready

or Diesel; Diesel-Heated

Belt-Drive Landa Pump

with 7-Year Warranty

3/4″ Schedule 80 Coil

The LANDA SLX- SLT Portable Hot Water Pressure Washer is Pre-plumbed with 3-Way Valve to bypass float tank when drawing water directly from an auxiliary tank.

Has Extra-large Heating Coil made ofcold-rolled, 3/4″ Schedule 80 steel pipe with 5-year warranty; features Stainless Steel Top Wrap; unique lift-out design for easy and quick Coil Access. SLX-SLT Hot Pressure Washer also comes with a Rugged 2″ x 4″ x 1/8″ thick box steel frame, with compact footprint, shields key components; further protected by weather-resistant Epoxy Powder Coat finish; Power Platform is vibration isolated to minimize frame stress.

Other SLX- SLT Portable Hot Water Pressure Washer Specifications are Water-resistant, metal Control Panel has adjustable thermostat, combination hour meter and tachometer, volt meter, burner switch and tri-lingual operating instructions for added safety. ®Manufactured To Cleaning Equipment Trade Association Performance Standards Cleaning Equipment Trade Association Performance Certified TM REGISTERED SLX. Adjustable Detergent and Steam Valves provide precise metering of soap and on-demand wet-steam cleaning.. Industrial-duty tri-plunger Landa Pump designed to run atlow RPM for long life,7-year warranty, with single-rail true-track Pulley Adjustment.

The LANDA SLX- SLT Portable Hot Water Pressure Washer also Comes with Gasoline-powered Vanguard and Honda Engines, or watercooled, 16‑27 hp diesel Kohler Engine all come with keyed electric starter for easy start-up and protection against unauthorized use; polyurethane Battery Box with vibration isolators protects and firmly secures battery (battery not included).

WHY CHOOSE LANDA’s SLX or SLT

When it comes to heavy-duty grease or grime, most high-volume, hot water pressure

washers fall short with their 150°F water. Landa’s SLX, and smaller SLT, are the first power

washers ever designed to deliver a high-volume flow at 200°F water, hot enough to melt the

toughest of oily messes. The SLX delivers enough hot water flow—up to 9.5 GPM—that

you can operate two spray guns at the same time!

Other benefits include:

QUALITY: Packed with Landa quality throughout, the SLX and SLT feature a top-of-the-line,

belt-drive Landa Pump with 7-year warranty and low RPM for extended life, as well as a giant

Schedule 80 heating coil, made of up to 300 ft. of 3/4‑inch steel pipe with 5-year warranty.

DURABILITY: Extraordinarily rugged frame is made of 2-by-4-inch box steel with an

all-metal power platform cushioned by 10 vibration isolators to minimize frame stress.

EFFICIENT: The SLX-SLT is heated by a high-efficiency Beckett burner with dual rings

for dial-in air flow. The 3/4″ heating coil is amazingly efficient due to its unique “breathing”

design so it heats quieter while promoting optimum heat exchange.

FUNCTIONAL: The SLX-SLT has a remarkably compact footprint, is certified to UL-1776 safety standards, is pre-plumbed for drawing water from an auxiliary

tank, has six forklift guides for portability and the control panel is ideally positioned for curb access when the unit is mounted on a trailer or truck bed.

Call Us for information on this Great Portable Hot Water Pressure Washer