BLOG

Posted on

Landa Natural Gas Pilot (Part No. 9.802‑685.0)

🔥 Why the Landa 9.802-685.0 Natural Gas Pilot Matters for Your Pressure Washer

If you’re running a hot-water pressure washer that uses natural gas, you already know how critical consistent burner performance is. But when your unit starts having trouble igniting—or won’t stay lit—you may be looking at a small, but essential part: the natural gas pilot.

One of the most common OEM parts in Landa pressure washers, the 9.802-685.0 Natural Gas Pilot, plays a critical role in the performance and reliability of your burner system. In this post, we’ll break down what it does, why it fails, and how to know when it’s time to replace it.

What Is the Landa 9.802-685.0 Natural Gas Pilot?

This component, also listed as Pilot A3-S #77623, is responsible for igniting the burner in natural gas-heated Landa pressure washers—like the popular ENG series or Tabernas cabinet units. It ensures safe and controlled ignition, acting as the intermediary between your system’s gas flow and the burner flame.

Without a functioning pilot, your pressure washer’s burner can’t do its job—leaving you with cold water and an ineffective wash cycle.

Signs Your Natural Gas Pilot Might Be Failing

Even though the pilot assembly is small, it deals with a lot of stress: heat, moisture, vibration, and dirt. That means it can wear out over time. Here are some common warning signs:

  • 🔄 Burner cycles frequently without consistent ignition
  • ❄️ Water isn’t heating properly or stays cold
  • 🔥 You smell gas near the burner compartment (a serious safety concern)
  • ⚠️ Your unit throws ignition or flame-sensing errors

If you’re seeing any of these issues, inspecting—and possibly replacing—the pilot is a smart first step.

Why Choose OEM: The Value of the 9.802-685.0 Pilot

There are lots of aftermarket burner parts out there, but when it comes to ignition and safety, going OEM (Original Equipment Manufacturer) is non-negotiable. The Landa 9.802-685.0 pilot:

  • ✅ Fits exactly as intended
  • ✅ Maintains warranty compliance
  • ✅ Performs safely and efficiently
  • ✅ Ensures compatibility with your washer’s electronics and burner controls

That peace of mind is worth the few extra dollars.

Installation Tips & Best Practices

Replacing a natural gas pilot isn’t overly complicated—but it’s still a job that requires care. If you’re handy or experienced with burner systems, here are some tips:

  1. Shut off the gas and power to your washer before doing any work.
  2. Inspect and clean the orifice and pilot tube regularly—even if not replacing.
  3. Use thread sealant approved for natural gas connections.
  4. Double-check connections for leaks before re-igniting the unit.

Not comfortable doing this yourself? A certified technician can typically handle it in under an hour.

Compatible Models

The 9.802-685.0 pilot is commonly used in Landa hot-water natural gas models, such as:

  • ENG4-2000
  • Tabernas NG models
  • Select HDS series units (by Kärcher North America)

Always confirm compatibility with your washer’s model number and serial.

Where to Buy the 9.802-685.0 Natural Gas Pilot

You can find this OEM replacement part right here at ShopETSOnline. We stock genuine Landa and Kärcher OEM components, so you know you’re getting the right fit—and fast.

💲 Current Price: $23.88
📦 Ships quickly from our U.S. warehouse
📞 Need help? Our tech team is just a call or click away.

Final Thoughts

A failing pilot may seem like a small problem—but it can quickly shut down your pressure washer or lead to costly downtime. If you rely on your hot-water unit daily for cleaning heavy equipment, vehicles, or job sites, it pays to keep the ignition system in top shape.

With the Landa 9.802-685.0 Natural Gas Pilot, you can count on reliable, OEM-grade performance—just like your washer was built for.

Posted on

Why the AR42321 Water Inlet Kit Is a Must-Have for Your Pressure Washer or Pump System

When it comes to high-performance pressure washers or misting systems, every component matters—especially the water inlet. Over time, wear and tear can compromise even the best machines. That’s where the AR42321 Water Inlet Kit by Annovi Reverberi steps in to keep your equipment running like new.

💡 What Is the AR42321 Water Inlet Kit?

The AR42321 is a genuine replacement part designed by Annovi Reverberi (AR), a global leader in high-pressure pump technology. This kit is built specifically for use with AR North America’s triplex plunger pumps, commonly found in pressure washers, misting systems, and AR Blue Clean equipment.

If you’ve noticed reduced water flow, inconsistent pressure, or leaking around the inlet area of your pump, it may be time to replace your water inlet kit—and AR42321 offers a direct-fit solution at an affordable price.

🚀 Key Benefits of the AR42321 Water Inlet Kit

  • ✅ Direct OEM Replacement – No modifications needed. Built to AR standards for easy installation and optimal fit.
  • ✅ Restores Performance – Prevents leaks, improves flow, and helps maintain consistent system pressure.
  • ✅ Durable Materials – Engineered to handle the rigors of high-pressure water applications.
  • ✅ Budget-Friendly Fix – Priced at just $13.06—a smart investment for extending your system’s lifespan.

🛠️ When Should You Replace the Water Inlet Kit?

Routine maintenance is essential, but here are some signs that your water inlet kit needs replacing:

  • Water leaking near the pump inlet
  • Lower-than-normal pressure during operation
  • Air bubbles or cavitation noises in the water line
  • Difficulty priming the pump

Replacing a worn or damaged water inlet kit is a quick fix that can save you from more expensive repairs down the road.

🧰 Easy Installation for DIYers and Pros Alike

The AR42321 kit is easy to install with basic tools—no need for professional servicing unless your system has additional issues. With clear part compatibility and no guesswork involved, you’ll have your machine back in action in no time.

🛒 Ready to Order?

At Shop ETS Online, we offer the AR42321 at a discounted price and ship fast—typically within 1 to 7 business days. Whether you’re a contractor, homeowner, or small business, this part keeps your equipment running smoothly without breaking the bank.

🔗 Click here to order the AR42321 Water Inlet Kit now

🔧 Final Thoughts

A small part can make a big difference. If your high-pressure pump isn’t performing like it used to, the AR42321 Water Inlet Kit could be the simple fix you need. Don’t wait until a small leak becomes a major headache—grab yours today and keep your equipment running at full throttle.

Posted on

Why the AR22620 Unloader Valve is a Game-Changer for Pressure Washer Users

If you’re a pressure washer enthusiast or professional, you know how important it is to keep your equipment running smoothly. One of the key components that often gets overlooked is the unloader valve—a small yet powerful part that plays a huge role in ensuring your pressure washer performs at its best. Today, we’re diving into why the AR22620 Unloader Valve should be at the top of your list for maintenance or upgrades.

What Does an Unloader Valve Do?

Before we get into the specifics of the AR22620, let’s take a moment to understand what an unloader valve does. When you pull the trigger on your pressure washer, water is pumped through the hose at high pressure to clean surfaces. When you release the trigger, the water pressure needs to be diverted safely to avoid putting strain on the pump. That’s where the unloader valve comes in—it regulates the water flow and diverts the pressure to prevent overloading the system.

Think of it as your pressure washer’s safety mechanism, ensuring that your machine operates efficiently without overworking itself.

Why the AR22620 Unloader Valve?

Now that we know how critical the unloader valve is, let’s look at why the AR22620 is a must-have upgrade for your pressure washer.

1. Precision Engineering for Maximum Durability

The AR22620 is built with high-quality materials that ensure long-term reliability and consistent performance. Unlike generic valves, this one is designed to handle the tough demands of both residential and commercial pressure washers. Whether you’re using it for a quick weekend cleaning session or handling a more intense industrial task, the AR22620 won’t let you down.

2. Automatic Pressure Control for Smooth Operation

One of the standout features of the AR22620 is its ability to automatically control the pressure in your system. When the trigger is released, the unloader valve takes over and safely diverts water, preventing unnecessary pressure buildup. This means no more sudden pressure spikes or annoying surges that could interrupt your cleaning session. Instead, you get a smooth, seamless experience every time.

3. Compatibility Across Different Pressure Washer Models

Another huge advantage of the AR22620 is its universal compatibility. No matter which brand or model of pressure washer you own, this unloader valve is likely to fit. This versatility makes it a top choice for users who need a reliable valve without worrying about compatibility issues. So, if you’re looking to replace an old unloader valve or upgrade your existing one, the AR22620 will likely work with your setup.

4. Easy Installation and Low Maintenance

No one wants to spend hours trying to install a new part, and the AR22620 understands that. Designed for easy installation, it can be quickly added to your system without the need for complex tools or professional help. Plus, it’s easy to maintain, saving you both time and money in the long run.

5. Heavy-Duty Performance for Extended Use

For those of you who use your pressure washers on a daily basis—whether for residential cleaning jobs or commercial tasks—the AR22620 is built to last. It can withstand the intense pressure from high-performance systems, ensuring it holds up even during extended use. This means fewer breakdowns and more time getting your work done.

The Benefits You Can Expect:

  • Protect Your Pump: By preventing over-pressurization, the AR22620 ensures your pump remains in top shape, saving you from costly repairs down the line.
  • Improve Efficiency: With smoother operation and better flow control, you’ll see fewer interruptions and more consistent performance from your machine.
  • Cost-Effective Solution: Replacing your old or malfunctioning unloader valve with the AR22620 is a smart, budget-friendly choice that can save you from dealing with bigger, more expensive issues in the future.

Conclusion: Keep Your Pressure Washer Running Smoothly

Your pressure washer is a valuable tool, and keeping it in peak condition is key to getting the most out of it. The AR22620 Unloader Valve is the perfect upgrade or replacement to ensure your machine operates safely, efficiently, and reliably. Whether you’re a DIYer with occasional cleaning tasks or a professional using your pressure washer every day, the AR22620 is built to handle whatever you throw at it.

So, don’t wait until your unloader valve fails—make sure your pressure washer stays in top shape with the AR22620 Unloader Valve. Your machine (and your wallet) will thank you!

Order today

Posted on

GIANT PUMP P205RE1B

Boost Your Pressure Washing Power with the GIANT PUMP P205RE1B

If you’re in the pressure washing business or handle heavy-duty industrial cleaning, you know that performance and reliability are non-negotiable. That’s where the GIANT PUMP P205RE1B steps in — a workhorse built to deliver unmatched power and durability. Available now at Shop ETS Online, this high-performance pump is engineered to handle your toughest jobs with ease.

Why Choose the GIANT PUMP P205RE1B?

The P205RE1B isn’t just another pressure washer pump — it’s a German-engineered powerhouse trusted by professionals around the world. Manufactured by Giant Industries, this triplex plunger pump is known for its rugged construction, smooth operation, and long service life.

Here’s what makes the P205RE1B stand out:

🔧 Heavy-Duty Performance

  • Max Flow: 5.5 GPM
  • Max Pressure: 3500 PSI
  • Speed: 1450 RPM
  • Inlet Port: 1/2” BSP-F
  • Discharge Port: 3/8” BSP-F

This pump is built to handle the pressure — literally. Whether you’re cleaning equipment, prepping surfaces, or running a commercial wash rig, the P205RE1B delivers the power you need without compromising performance.

🧩 Durable, Precision Build

With forged brass manifolds, solid ceramic plungers, and stainless steel valves, this pump is designed for longevity and resistance to corrosion, wear, and chemical exposure. It’s an investment in reliability that pays off in reduced downtime and maintenance.

⚙️ Smooth, Efficient Operation

The triplex plunger design ensures smoother operation and greater efficiency than standard pumps, minimizing vibration and maximizing output. Combined with its low-speed 1450 RPM operation, it runs cooler and quieter — ideal for long workdays.

Ideal for Commercial and Industrial Applications

From agriculture and construction to fleet washing and sanitation, the P205RE1B is a favorite across industries that demand constant, high-pressure water flow. It’s also compatible with many major pressure washer brands, making upgrades or replacements seamless.

Buy with Confidence from Shop ETS Online

When you purchase the GIANT PUMP P205RE1B from ShopEtsOnline.com, you’re not just buying a pump — you’re gaining access to:

  • Competitive pricing
  • Fast shipping
  • Exceptional customer service
  • Expert advice and product support

Our team understands the equipment you rely on, and we’re here to make sure you get the right pump for your needs.

🛒 Ready to Upgrade?

Don’t let a subpar pump slow you down. The GIANT PUMP P205RE1B is in stock and ready to ship. Order now and experience the Giant difference in pressure performance.

Posted on

2015 Hino Strait Box Delivery Truck Van – $31,880 (Norwood PA)

2015 Hino Strait Box Delivery Truck Van – $31,880 (Norwood PA) PA, NJ, DE Area

2015 HINO 338 is a Class 7 commercial strait box truck with a 33000 GVW rating. 260HP HINO 7.6L JO8E-V8 Diesel, Allison RDS 2500 Transmission. 90 gal fuel tank. Low 221,911 miles. 217 wheel base. 18Ft Morgan Fully Insulated dry box body. Rhino coated floor and walls. Interior spot lights. 12 ft height. New rear tires, recent inspection. Well working Palfinger ILP33 3300lb Liftgate 60 x 80. Never in accident. Low average 22,000 mile/year local Philly Metro by the same two drivers. One owner always had scheduled preventative maintenance at the original Hino Dealer. Complete service records available. Very well cared for. Paid new in 2015 $89,400. Excellent condition! Now $31,880. IN PERSON SALES ONLY! WILL BE LEGALLY TRANSFERRED AT A PENNSYLVANIA AUTO TAG AGENCY IN PERSON ONLY! Paid in full only. No Solicitors!

LOCAL SALE ONLY!  PA, NJ, DE.  CASH ONLY email for serious inquiry only ets@etscompany.com

 

LOCAL SALE ONLY!  PA, NJ, DE.  CASH ONLY email for serious inquiry only ets@etscompany.com

Posted on

Mi-T-M Part # – 18-0308 – SOLID OIL NOZZLE 1.75-60 DEG

Mi-T-M Part # – 18-0308 – SOLID OIL NOZZLE 1.75-60 DEG

  • Item: Fuel Oil Nozzle
  • For Use With Grainger Item Number: 1RM77, 1RM78, 2GXK7, 2GXK8, 2GXK9, 2GXL1, 3WB75, 3WB76, 3WB81, 3WB82
  • Fits Brand: Mi-T-M
  • For Use With Mfr. Model Number: GH-2504-0M10, GH-2504-0M30, GH-2504-SM10, GH-2504-SM30, GH-3004-0EGH, GH-3004-0M10, GH-3004-0M30, GH-3004-SM10, GH-3004-SM30, GH-3504-0EGH
  • Product Type: Fuel Oil Nozzle

 

Order yours today Here

Posted on

LANDA – 8.750-477.0 HOSE REEL

LANDA – 8.750-477.0 HOSE REEL, FIXED BASE, 100′ LANDA.

This oversized hose reel holds 100 feet of hose and leaves additional space, reducing the difficulty of reeling hose. Rugged, heavy-duty construction for commercial applications. Heavy gauge steel fabrication with durable handle with a gloss black powder coating. Easy to use brake mechanism reduces unwinding backlash, and the oversized heavy-duty locking mechanism prevents slippage during reel operation.

Technical data

Standard nominal width (in) 0.38
Max. Pressure (psi) 5000

8.750-477.0

Order Here Limited Supply at only $200.00