BLOG - Page 74 of 144 - ETS Co. Pressure Washers and More!

October 30, 2017

Comet Pumps – 8108.2532.00 Unloader – VRT-3

The Comet Pumps – 8108.2532.00 Unloader – VRT-3, is a pressure regulator that senses when your pressure washer pumps gun is in the standby or off position. It diverts excess pressure into a bypass mode so no damage from excessive pressure gets to your pump.

This Comet Pumps – 8108.2532.00 Unloader – VRT-3 is rated for pressure washer pumps that have a flow rate of 8.0 GPM and a maximum PSI of 4500. It is vital to have a working unloader on your pump, because if the pressure builds up too much in your pump you risk damaging the unit and then replacement would be the only option. An unloader is a lot cheaper to replace on your pressure washer than the entire pump.

The Technical Specifications of the Comet Pumps – 8108.2532.00 Unloader – VRT-3 are:

8.0 GPM
194° F Max
PSI 4500
Inlet 3/8″ FPT
Outlet 3/8″ FPT
Color Black
MV #0215010320

Need to repair instead of replacing it? Find this unloaders repair / breakdown manual by clicking here. Find your part or kit and then order it here. You can also order it over the phone by giving us a call toll free by clicking our number here: Call 1-877-824-7763 {Smart Phones Click to Call}

Or, order this entire unloader by clicking here, to get your comet driven pressure washer pump back up and running.

This unloader does qualify for our Everyday sale of 5% off of $50.00. Just use the code “5off” at check out to get even more savings!

October 27, 2017

Cat Pumps 34053 Seal kit for 2SF pumps

The Cat Pumps 34053 Seal kit for 2SF pumps is the most common seal kit for 2SFX and 2SF Pumps that are made by CAT. When there is leaking in your pump the seals are the first thing you should look into. They are the easiest thing to wear but luckily the easiest thing to replace as well.

This picture below is of the Cat Pumps 34053 Seal kit for 2SF pumps. You will see it has most of what you need to repair your pressure washer pump and the cost is way more acceptable than purchasing a whole new pump.

The kit contains the following items:

O-rings and rubberized seals to fix one pumps wet end.

You will only need one kit per any 2SF or 2SFX CAT Pump you may have.

Not sure if this is the right repair kit for your pump, check out our repair / breakdown manuals here to see if it’s listed as a repair kit. Don’t see the kit listed or just not sure about what is wrong with your pump, give us a call toll free and we will help you determine the correct fix for your CAT pump for your pressure washer. Most times it’s much more economical to repair these pumps then replace them as CAT Pumps can be very expensive. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the Cat Pumps 34053 Seal kit for 2SF pumps? Click here to quickly and safely order this kit today from our e-Commerce store.

This kit does qualify for our 5% off $50.00 everyday sale. Just add the coupon code “5off” in the field at checkout and get an additional 5% off your subtotal.

October 25, 2017

General Pumps – K04 – KIT 4 – Valve Brass Caps

The General Pumps – K04 – KIT 4 – Valve Brass Caps is one of the most common repair kits made for general pumps. It’s used primarily on the T and TS series of pumps made by general.

This General Pumps – K04 – KIT 4 – Valve Brass Caps come in a kit that has six brass caps that have a part number of 98222000 and six o-rings that are identified as 90384700 and measure .797 X .103. You will need one kit per pump you are trying to repair.

As always please check your pumps repair / breakdown manual before ordering any parts to verify this is the correct repair kit you need. You can click here to see your pumps manual and check if the General Pumps – K04 – KIT 4 – Valve Brass Caps is indeed used on your pump.

You can always call us if you are unsure of what pump you have or if this kit will work for your repair. Please try to have your pumps model number or at least it’s PSI and GPM info. With out this it will be hard for us to identify your unit. Call toll free: Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order and get back up and pressure washing with your general pump driven machine? Click here to order this kit.

This kit qualifies for our 5% off $50.00 everyday sale! Just add the coupon “5off” in the field at check out and you will get an additional 5% off your subtotal.

October 24, 2017

AR Annovi Reverberi R6010A Electric Motor

The AR Annovi Reverberi R6010A Electric Motor is a 1750 rpm, 3 phase unit made to work with most AR pumps. This motor is 7.5 HP with a shaft diameter of 1 – 1/8″ for mounting to your machines. The units connector box is on the top of the motor and it’s construction of anodized metal, makes it strong and able to stand up to chemicals normally used around machines that require a motor.

This AR Annovi Reverberi R6010A Electric Motor is used in a variety of situations so it’s built to deliver power and pressure so no matter what your using it for it will stand up to the use and abuse.

The features of this AR Annovi Reverberi R6010A Electric Motor are:

RPM of this motor is 1750
Thermal Protection is available On request
Voltage for this model is 230/460V
Enclosure made from TEFC
Phase is a 3
Service Factor: 1.0
Hertz is 60
Frame is NEMA 213
Full Load Amps are 22.4/11.2
Bearings: KBC 6306ZZ/2pcs
Weight is only 88 lbs

Not sure if your AR pump works with this motor? Find your pumps manual and or breakdown by clicking here. Still not sure if this is the right motor for the job? Give us a call and we will be happy to help you determine the correct model for your needs. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to purchase this motor? Click here to order it from our eCommerce store.

Every pump we sell from AR does qualify for our everyday sale of 5% off of $50.00! Just add the code “5off” to the field at check out on our store and you will get an additional 5% off your subtotal.

October 23, 2017

CAT Pump 7535 Pressure Unloader

The CAT Pump 7535 Pressure Unloader is designed for CAT Pumps that have a maximum flow rate of 21 gpm at a PSI of 4000. The minimum PSI is 800. Then unloader is for a single or multiple pump set up with either a weep or multiple nozzle machine. This unit relays on a 5 to 10% bypass for creation of the optimal unloader performance.

This CAT Pump 7535 Pressure Unloader will maintain the pressure and go into a bypass mode when the trigger of your pressure washers spray gun is released, or if there is some type of external blockage in the downstream of the hose.

The features of this CAT Pump 7535 Pressure Unloader are:

Maximum Flow rate is 21 gpm
Minimum Pressure on the unloader is 800 psi
Maximum Pressure output of the unit is 4000 psi
Inlet Port Size measures 0.5
Discharge Port Size has a measurement of 0.5
Type of Accessory is a CAT Unloader
Material of the bodies construction is Brass (BB)

Not sure if the CAT pump you have will work with this unloader? Or need to repair this unloader? Find the repair manual / breakdown of your pump or of this unit to see if it will work for you or for parts for getting the unloader back up and running with out having to replace the whole unit.

Still not sure if the CAT Pump 7535 Pressure Unloader is correct? Just give us a call toll free and a CAT Pumps specialist will help you out. Call 1-877-824-7763 {Smart Phones Click to Call}

Order this unloader here on our secure eCommerce site.

This unloader from CAT Pumps does qualify for our everyday sale of 5% off of $50.00. Just use the code “5off” in the coupon field at check out to get an additional 5% off your subtotal.

October 20, 2017

Annovi Reverberi Accessory – AL-QCOKIT3/8

The Annovi Reverberi Accessory – AL-QCOKIT3/8 is an o-ring kit, that comes with 25 o-rings that measure 3/8″. These o-rings are used in a number of places on a number of different pressure washer pumps from Annovi Reverberi.

This Annovi Reverberi Accessory – AL-QCOKIT3/8 seen above is made of Buna Rubberized material for long lasting use even in the harshest of environments. Even though they are durable, it is one of the most repaired parts of your pump, so be sure to stock up on a few of these kits so you are never without them for a quick on the job repair.

Not sure if your pump uses the o-rings from this Annovi Reverberi Accessory – AL-QCOKIT3/8? Just find your pumps breakdown / repair manual here and see. They should work on most pressure washer pumps AR makes, but if your can’t find your manual above or are still having issues, give us a quick call and we will be happy to help you determine if this is the right sized o-rings your need for in the field fixes. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this Annovi Reverberi Accessory – AL-QCOKIT3/8? Do so by clicking here and ordering one or more from our secure eCommerce store.

October 19, 2017

General Pumps – EZ4035G34 Bolt and Go Pump Package

The General Pumps – EZ4035G34 Bolt and Go Pump Package, is a quick kit we have created with the help of general pumps to get your pressure washer up and running as simply and as fast as unbolting the old pump and bolting on this new one. It is for pressure washers that require 3.5 gpm at 4000 PSI.

This General Pumps – EZ4035G34 Bolt and Go Pump Package has and rpm of 3400 and comes with the unloader, thermal relief valve, garden hose fitting as well as the high pressure quick coupler plug all standard and ready to go.

Here are the technical specification of the General Pumps – EZ4035G34 Bolt and Go Pump Package:

Maximum Volume of the pump is 3.5 GPM
Maximum Discharge Pressure on this unit is 4000 PSI
Maximum Pump Speed of the unit is 3400 RPM
Bore measures at 13mm
Stroke has a measurement of 11mm
Crankcase Oil Capacity is 14 oz
Maximum Fluid Temperature of this pump is 165 F
Inlet Port Thread measures 1/2″ FPT
Discharge Port Thread measures 3/8″ FPT
Hollow Shaft I.D is 1″
Weight of the unit is 20 lbs.
Dimensions measure 8.8″x9.7″x6.5″

Have you purchased a General Pumps – EZ4035G34 Bolt and Go Pump Package from us before and now want to fix the unit? Please find the repair manual or parts breakdown by clicking here and then ordering your repair parts and kits with us directly. You can also call us directly with any questions you may have toll free at: Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to purchase this easy bolt and go pump package? Click here to order it on our secure eCommerce site.

This pump package does qualify for our everyday sale of 5% off $50.00 or more. Just add the kit to your shopping cart from the above link and add the code “5off” in the coupon field on the cart page and you will get an additional 5% off the total

October 18, 2017

Annovi Reverberi Unloader – VR54-200

The Annovi Reverberi Unloader – VR54-200 is a red knobbed unloader for your pressure washer pump from AR pumps that requires a unit with a maximum volume of 8 GPM at a maximum PSI of 2900. If your pump specs meet these requirements this is the unloader for you.

Annovi Reverberi Unloader – VR54-200 is totally adjustable made with a brass body for long life and has a high fluid temperature of 194° F. making this unit built to hold up even in the worst operating conditions you can get yourself into.

Already own a Annovi Reverberi Unloader – VR54-200, and want to try to fix it? You can see if we have the repair kits you need by finding the units repair / breakdown manual here. If you can’t figure out if you can fix it or are needing more assistance you can give our AR Pumps specialists a call toll free. Call 1-877-824-7763 {Smart Phones Click to Call}

Here are the technical specifications of this Annovi Reverberi Unloader – VR54-200:

• Maximum Pressure of the unloader is 2,900 PSI
• Max. Volume of this unit is 8.0 GPM
• Knob Color is marked RED
• Adjustable pressure
• Brass valve body
• Max. Fluid Temp. is rated at 194° F.
• Inlet Port measures 3/8″ MNPT
• Discharge Port has a measurement of 3/8” MNPT
• Bypass Port has a diameter of 3/8” FNPT
• This unit Replaces MV520K Unloader
• Weight of this unloader is only 13.7 oz

Still not sure if this Annovi Reverberi Unloader – VR54-200 is right for your pressure washer pump from AR Pumps? Give us a call and we can help you. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this unit? Just click here to order fast and secure on our eCommerce site.

This unit alone is a great price, thanks to our deal with Annovi Reveberi and we pass that on to you. It does not however qualify by itself for our everyday 5% off sale. You would need to add a little something else to your cart to get the total up to $50.00 and then you would get an additional 5% off your total. Something like pump oil ? o-rings? Whatever you need to get it up to $50.00 then just use the code “5off” in the coupon field at check out to get even more savings.

October 17, 2017

Annovi Reverberi Pump – GRKV4G35HV-F35

The GRKV4G35HV-F35 pump from Annovi Reverberi is a gas driven 4 gallon per minute at 3500 maximum PSI replacement pump for pressure washers and machines that have these maximum specifications. The pump spins at 3400 rpm and comes with a 1 inch tapered gas engine flange standard.

This GRKV4G35HV-F35 pump has a head forged from brass and and solid ceramic plungers as well as over sized roller bearing for long life even in the most hostile working environments you can think of.

Here are the technical specifications of the GRKV4G35HV-F35 pump:

Oil Capacity of this unit is 15.3 oz
Maximum Fluid Temperature of the pump is 140° F
Inlet Thread measures 1/2” F
Discharge Thread has a measurement of 3/8” F

Some other specifications of this unit are:

MANIFOLD of the unit is made from High strength forged brass or nickel plated for long term use.
BOLTS measurement of Eight 10mm grade 8.8.
PLUNGERS are made of a special thick solid ceramic for long life, strong durability and more resilience.
CRANKCASE is made from Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs.
BEARINGS are Oversized premium tapered roller bearing for maximum life and load distribution.
BEARINGS SUPPORTS of this pump are Precision die-cast and machined to assure concentricity and alignment.
VALVES, SEATS, AND SPRINGS of the unit are Stainless steel with specially designed Ultra Form cages to provide long life and positive seating.
SEALS AND V-PACKINGS are Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal.
PLUNGER RODS on the unit are High strength stainless steel, for heavy duty use.
CONNECTING RODS are formed from Two-piece special alloy aluminum based material, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.

Need to repair this GRKV4G35HV-F35 pump? Click here to find the pumps breakdown / repair manual. Can’t find it, or having other site issues? Give us a call toll free and we will help you out with any questions you may have about gas powered pressure washer pumps. Call 1-877-824-7763 {Smart Phones Click to Call}

If you’re ready to place and order for this pressure washer pump, click here.

This pump does qualify for our everyday 5% off sale. Just add the coupon code “5off” in the field on your check out page to get an additional 5% off your total.

October 16, 2017

LANDA High Limit Switch 8.712-297.0

The LANDA High Limit Switch 8.712-297.0 is rated for 230 Degrees and has a 42″ wired lead. This pig tailed switch is and OEM from LANDA that will work on most machines it makes, and is easy to install.

This LANDA High Limit Switch 8.712-297.0 runs as the safety device that will shut off your machines burner and in turn prevent water in the unit from over heating and turning into steam. The device will not let the LANDA machine turn back on until the water had cooled to about 50 to 70 degress.

Features of this for this LANDA High Limit Switch 8.712-297.0:

HEAVY DUTY BRASS HOUSING.
UL – CSA RATED BIMETAL SWITCH COMPONENTS.
¼” MALE SPADE LUG TERMINALS.
NORMALLY USED WITH AN ADJUSTABLE OR FIXED RANGE THERMOSTAT.

Not sure if this LANDA High Limit Switch 8.712-297.0 is the correct fix for your LANDA Pressure Washer? Find your machines breakdown / repair manual here to verify if this is the correct fix for your unit. Don’t see your breakdown here? Give us a call toll free and a specialist will be happy to assist you to get you up and running fast.

Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this repair part for your LANDA Machine? Click here to order safely and securely on our eCommerce site here.