Where hoses or implements require connection without the use of tools. Swivels allow hydraulic hoses to turn without twisting and binding. Sophisticated SensoControl® Diagnostic Equipment detects even the slightest variances when troubleshooting or proving your system. Thermoplastic Quick Couplings are compatible with many chemicals used in both agricultural and industrial applications. Check Valves eliminate potential damage caused by fluid back pressure.
List Price: $41.70 Our Price: $40.70 You save $1.00!
List Price: $43.75 Our Price: $43.75
QUICK COUPLER 3/8″ Female Pipe Thread X 3/8″ FEMALE SOCKET STAINLESS STEEL. MAX TEMPERATURE 400 DEG MAX BALL SAFETY LOCK. For use with cold or hot pressure washers.
Quick Couplings Price subject to change. Price valid on these quick Couplings 12/23/2011.
The Hannay Industrial Hose Reels C1500 Series – C1530-17-18 is ideal For storage of Hose, Cable, Rope, Wire.
The Hannay Industrial Hose Reels C1500 Series – C1530-17-18 Features:
The Hannay Industrial Hose Reels C1500 Series – C1530-17-18 are designed for storage of long lengths of hose, cable, rope, wire or other materials.
A 1-1/8″ x 2-3/8″ (28 mm x 60 mm) opening in the drum to initiate winding.
Direct crank rewind, permanently attached. Removable crank option is available. Also available chain and sprocket rewind powered by electric, compressed air, or hydraulic motor.
The Hannay Industrial Hose Reels C1500 Series – C1530-17-18 are Supplied with cam lock brake on manual rewind models only.
Optional divider discs can be placed at almost any point. Be sure to specify spacing of discs on your order.
Rollers may be purchased as accessory items.
The Hannay Industrial Hose Reels C1500 Series - C1530-17-18
The Hannay Industrial Hose Reels C1500 Series – C1530-17-18 has the following specifications:
Specifications subject to change.
Dimensions reflect pressed frames.
Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Electric Net (lbs.) 18, Ship (lbs.)18, Net (kg.)8.2, Ship (kg.)8.2
Hydraulic Net (lbs.) 15, Ship (lbs.)15, Net (kg.)6.8, Ship (kg.)6.8
Air Net (lbs.) 15, Ship (lbs.)15, Net (kg.)6.8, Ship (kg.)6.8
For Power Rewind – When ordering power rewind models, prefix model number with:
A = Air Rewind
E = Electric Rewind
HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.)
Finish: refer Reel Policies
Be sure to check dimensions and weights prior to ordering.
Hannay Industrial Hose Reels C1500 Series C1530-17-18
Our Price: $210.00 Availability:: available for order Product Code: HAHR-8-31
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE HANNAY INDUSTRIAL HOSE REEL C1500 SERIES C1530-17-18 12/14/2011
+ To convert from BSP to NPT threads you may order 06581
(1/4″ MBSP x 1/4″ FNPT) or 06581M (1/4″ MBSPx1/4″ MNPT)
MAINTENANCE NOTICE:
If GIANT Pumps Series 22060A Turbo Nozzle will not spin, take unit apart and clean the nozzle. If turbo still will not spin, have an authorized distributor repair nozzle.
GIANT Pumps Series 22060A Turbo Nozzle
List Price: $180.25 Our Price: $138.70 You save $41.55! Availability:: available for order Product Code: GIANT-22060A-10.0
GIANT Pumps Series 22060A Turbo Nozzle
PRICE SUBJECT TO CHANGE. PRICE VALID on the GIANT Pumps Series 22060A Turbo Nozzle 12/8/2011
EACH KIT CONTAINS 3 EACH OF: 18MM PISTONS, BACKUP RINGS, O RINGS, SLINGERS, WASHERS, AND NUTS TO SERVICE YOUR PRESSURE WASHER PUMP
This piston repair AR2546 kit covers the 18mm bore size of the XRA/XRCA series pumps from Annovi Reverberi. Model numbers include: XRCA3.5G22, XRCA3.5G25, XRCA3.5G30H, XRCA3.5G40H, XRCA4G20, XRCA4G30, XRCA4G30H, XRCA4G35H, XRCA4G40H, XRCA4.5G17, XRCA4.5G25, XRCA4.5G25H, XRCA4.5G30H, XRCA4.5G35H.
Annovi Reverberi AR2546 Kit
List Price: $188.74 Our Price: $116.19 You save $72.55! Availability:: available for order Product Code: AR2546
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE ANNOVI REVERBERI AR2546 KIT VALID 12/06/2011
Spotlight on LANDA – WATER JET SURFACE CLEANER – Click here to order today 8.903-606.0
LANDA – WATER JET SURFACE CLEANER – 8.903-606.0
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 is the premier surface cleaner on the market. This LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 attaches easily to a hot- or cold-water pressure washer and “mows” grime on most flat surfaces, from concrete to asphalt. The stainless steel spray bar, with two precision spray nozzles, spins at an astounding 2000 RPM.
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 is the Mercedes-Benz of the surface cleaning market. It handles easier, cleans faster and holds up better under the toughest conditions. The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 spray bar spins at 2000 RPM and can be adjusted to blast concrete but not dig up asphalt or wood. The rotating bar and shaft are made of stainless steel with sealed precision guide bearings for low maintenance and a long life. A holster-mounted trigger gun and insulated wand make for convenient spot cleaning in hard-to-reach places.
Other features of The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 include:
• Made of durable, rust-free polyethylene, for easy handling,but weighs only 45 lbs.
• Pneumatic tires on steel wheels make for easy maneuvering on all surfaces;
• Easy-to-clean, in-line filter keeps spray nozzles from plugging;
• Auto switching between surface cleaner and holster-mounted wand;
• Tri-lingual warnings and operating instructions;
• Collapsible handle for ease in transporting.
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 Features:
Water Jet surface cleaner easily attaches to Hot- or Cold-Water Pressure Washer
Up to 5 GPM, 4000 PSI
Spins at 2000 RPM
Fatigue-free Trigger Bar
LANDA – WATER JET SURFACE CLEANER – 8.903-606.0
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 has the following specifications:
Fatigue-free, safety Handle and Trigger Bar instantly stops the Water Jet surface cleaner for operator protection.
Easy-turn Swivel Hose Connection keeps the hose from tangling while the Water Jet surface cleaner is attached to the pressure washer for easy handling and maneuvering.
Tri-Lingual Operating Instructions and Warnings in English, Spanish and French for convenience of the operator and owner liability protection.
Easyto-clean, high-pressure Inline Filter minimizes maintenance by preventing spray nozzles from plugging.
Self-lubricating Rotary Union is protected in a stainless steel housing and features industrial strength ball bearings and tungsten carbide seat for long life and low maintenance.
Recommended Operating Pressure: 2000 – 4000 PSI
Recommended Water Volume: 2 – 5 GPM
Maximum Allowable Water Temp: 190°F
Cleaning Width: 22 inches.
Dimensions: 48”L x 22”W x 37”H
Product Code: LAN-8.903-606.0
Click here to order today 8.903-606.0
SHIPS UPS OVER-SIZED. COMES COMPLETELY ASSEMBLED.
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS WATER JET SURFACE CLEANER 12/2/2011
Description for the Giant Stainless Steel 22050A ACCUMULATOR
The 22050A ACCUMULATOR Installs on the inlet of pump to extend pump and system life by reducing pulsations. The 22050A ACCUMULATOR is to be pre-charged with nitrolgen to one-half the system operating pressure. Do not pre-charge the 22050A ACCUMULATOR beyond the rated system operating pressure.
It is recommended that the Giant Stainless Steel 22050A ACCUMULATOR be mounted pointing down as a safety precaution.This procedure allows the 22050A ACCUMULATOR to remain cooler during system operation and prolongs the effective operating life of the accumulator bladder. Shelf life of the nitrogen pre-charge of the 22050A ACCUMULATOR is approximately six months before re-charging is necessary. It is recommended the nitrogen pre-charge be checked approximately every three months after installation in a pressure system.
The Giant Stainless Steel 22050A ACCUMULATOR Features:
Capacity (Giant Stainless Steel 22050A ACCUMULATOR / 22050A-5100): 6.75 cu in.
Burst Strength: 10,000 P.S.I.
Giant Stainless Steel 22050A Accumulator
List Price: $165.58 Our Price: $127.41 You save $38.17! Availability:: available for order Product Code: BAPL-2407 Giant Stainless Steel 22050A ACCUMULATOR
PRICE SUBJECT TO CHANGE. PRICE VALID OF THE GIANT STAINLESS STEEL 22050A ACCUMULATOR VALID 11/7/2011
The BE-2000WAWY Whirl-A-Way cleans flat surfaces quickly, easily, and evenly. Use the BE-2000WAWY Whirl-A-Way, along with a power washer, to clean large flat surfaces such as long driveways, parking lots, rooftops, or pool decks. This flat surface BE-2000WAWY Whirl-A-Way cleaner prevents zebra striping and increases your cleaning time by up to sixty percent over a regular nozzle. This BE-2000WAWY Whirl-A-Way has water flow out the front away from the user and zero wall clearance cleaning
The WHIRL-A-WAY BE-2000WAWY Features:
Hover action on this WHIRL-A-WAY BE-2000WAWY is ideal for cleaning aggregate, stamped concrete and other flat surfaces
The WHIRL-A-WAY BE-2000WAWY is Ideal for rooftop cleaning applications
This WHIRL-A-WAY BE-2000WAWY is Easy to handle frame is designed for less operator fatigue.
The WHIRL-A-WAY BE-2000WAWY has Heavy duty polypropylene cover & durable nylon brush skirt
4,000 PSI rotary head
Zero wall clearance
The WHIRL-A-WAY BE-2000WAWY has Welded steel two arm rotary bar
This WHIRL-A-WAY BE-2000WAWY has the following Specifications:
4,000 PSI Max Pressure (275 BAR)
8.0 GPM Max Flow (30.4 LPM)
180° F Maximum Temperature
20″ Diameter size
Nylon brush skirt
2 Arm design with (2) # 2.5 @ 25° meg nozzles
Trigger Gun Inlet: 3/8 QC Plug
Note: Works best with a 9HP engine/ 3.0 GPM or greater
Weight 32 lbs
Replacement Parts
Rotary Head: 85.790.004
Rotary Arm: 85.791.013 (18″)
Rotary Head Repair Kit: 85.790.010
Nylon brush skirt: 85.790.014
Replacement nozzle tip: 85.225.025
Our Price: $444.77 Availability:: available for order Product Code: BE-2000WAWY
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS WHIRL-A-WAY BE-2000WAWY 11/3/2011
The AR2233 Valve Kit for all Annovi Reverberi RM Series Pressure Washer Pumps.
AR2233 Valve repair kit for RMW series of pumps from Annovi Reverberi.
AR2233 Annovi Reverberi
This AR2233 is for models RMW2G20, RMW2.2G24, RMW2G23B, RMW2G24, RMW2G25, and RMW2.2G20D only. AR VALVE KIT AR2233 CONTAINS 6 VALVE ASSEMBLIES AND O-RINGS TO SERVICE 3 CYLINDERS ON YOUR AR PRESSURE WASHER PUMP.
AR2233 Annovi Reverberi
The AR2233 work with all Annovi Reverberi RM Series Pressure Washer Pumps. These Annovi Reverberi plunger pump will pump up to 2.5 GPM at 2500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” and 7/8″ shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Flows: 2 to 2.5 GPM Pressure to: 2500 PSI Speeds: 3400 rpm Shaft Styles: Hollow Shaft 3/4″ and 7/8″.
AR2233 Annovi Reverberi
While these AR2233 valves might seem small and insignificant, they play a vital roll in the Annovi Reverberi RM and RMW pumps being able to build up pressure to allow the operator to finish their project quickly and economically. So if your a contractor who’s RM annovi reverberi pump run pressure washer is lacking the power to pressure clean, look at these valves first. If they seem worn or missing replace them with the genuine repair kit AR2233 from ETS Co. and Annovi Reverberi.
General Pump Stainless Steel Check Valve YCV38FSS – 3/8″F-NPT
Click here for the General Pump Stainless Steel Check Valve YCV38FSS parts list.
General Pump Stainless Steel Ckeck Valve YCV38FSS
The General Pump Stainless Steel Check Valve YCV38FSS Features:
General Pump Stainless Steel Check Valve
10.5 gpm
Rated pressure: 5800 psi, max. 6500psi
3/8″ inlet
List Price: $57.10 Our Price: $43.94 You save $13.16! Availability:: available for order Product Code: YCV38FSS
Price subject to change – Valid 10/4/2011
Pressure Washer Surface Cleaners
How To Deep Clean Large Flat Surfaces?
The solution is our flat surface cleaners
Pressure washer surface cleaners are powerful and reliable. They are used for high pressure cleaning driveways, concrete floors, parking lots, roofs, warehouses, boat ramps, garage floors, boat decks, and more. The benefits of using these products are clear: effective, shorter working times, enormous energy savings and long useful life due to their high industrial quality. You will be able to complete your power washing tasks in the shortest possible amount of time.
HOW DO SURFACE CLEANERS WORK?
High speed flat surface cleaners can consist of 2 or 3 (dual or tri arm) arms that spin in a counter clock wise direction for up to 1800 RPM (rotations per minute). At the end of each arm you will find a 1/4” MEG 25° spray nozzle that can cover the path from 16” to 30” diameter, depending on the size of the actual round housing. These cleaners can remove dirt for up to 15 times faster then the standard wands and 10 times faster than the water brooms. Operation: the user walks behind the unit holding the two handles from which one of them has a spray gun that works the same like any other pressure washer gun. The arms are connected to the shaft that is part of the spinning head (a mechanism that allows smooth rotation of the arm). These arms rotate/spin with the flow of the water (greater the water volume – the faster the spinning times), which creates a scrubbing action with the water coming out. The spray nozzles are only 1/2” to 2” away from the surface which allows greater cleaning capabilities. The edge of the housing and the brush skirt protect the surrounding area from over spraying. Some of our models come with the casters and some without. Units without the casters are designed to “hover” or “float” above the ground, so the maneuverability is not an issue. The greatest advantage of these machines is that they eliminate the “zebra” stripping usually found on driveways and sidewalks.
Some of the many uses for this pressure washer surface cleaner include:
2) Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use Teflon tape when installing nozzles.
3) Start Pressure Washer. The flat surface cleaner is ready for operation.
4) Walk slowly behind the flat surface cleaner, cleaning as you go. If striping occurs, slow down your pace.
5) Periodically check weep hole on bottom of swivel. Water will seep slowly; if water shoots out, stop and replace seals. Swivel assembly can be rebuilt.
6) For maximum effectiveness keep spray nozzles clean. If the machine vibrates, stop and clean spray tips.
7) Lubricate swivel with one squirt of good quality grease every 200 hours of operation or about once a month if used daily. A small amount of grease coming out of the bottom of the swivel is normal.
DO NOT ALLOW MACHINE TO REMAIN STATIONARY ON SOFT SURFACES, SUCH AS WOOD.
CAUTION: Striking any raised obstacle during operation will damage machine. If contact does occur and results in vibration when operating machine, STOP and replace spray bar. Continued operation could result in serious injury or damage to machine.
What are the Benefits of the Flat Surface Cleaner
How much time will this equipment actually save me (versus using the standard wand)?
The following comparison shows the time taken to clean a typical size driveway (400 sq. ft.) using 2 different components.
