Category: pressure washer pumps

Posted on

RSV4G40 – PKG Pump Package from Annovi Reverberi

RSV4G40 – PKG Pump Package from Annovi Reverberi

Order the RSV4G40 – PKG from Annovi Reverberi Online.

The RSV4G40 pump package from Annovi Reverberi comes with everything you need to get your pressure washer back up and running.  The RSV4G40 – pkg is rated 4 gallons per minute with a maximum pressure of 4000 PSI.  This package is set up to connect directly to your gasoline powered pressure washer with its standard gas flange, and the RSV4G40HDF40EZ pump that comes as part of this package spins at a very powerful 3400 RPM.  This kit was put together by AR Pumps with ease in mind.  They are giving your the 4 GPM pump, which has a built in unloader and easy start valve, all the connection pieces and even a detergent hose with its filter, so basically everything you will need.  As with most AR pumps this RSV4G40 pump package is built to last with a forged brass head and solid ceramic plungers, it will give you years of service before it needs replacing.

RSV4G40 - PKG from AR Pumps
RSV4G40 – PKG from AR Pumps

A few other things you may need to know about the RSV4G40-pkg:

  • The AR7365 – 3/8″M nipple connector.
  • An AR7366 – 3/4″F nut connector.
  • Inlet filter part number AR7369.
  • A quick connect coupler AL-QC3/8B.
If you already own this RSV4G40 pump package or the pump itself the RSV4G40HDF40EZ, and need repair parts and kits for it you can find those on the pumps breakdown that came with your unit.  If you lost that manual and need to reprint it you can do so by clicking here.
RSV4G40-PKG Pump parts breakdown from AR Pumps
RSV4G40-PKG Pump parts breakdown from AR Pumps

Do you still have some concerns if this is the right replacement pressure washer pump for your machine?  Why don’t you just give us a call, and we will help you determine the correct item for your type of machine and work you are doing with it.  1-877-824-7763 {Smart Phones Click to Call}

Absolutely sure this is the right deal for you? The order this pump package on our online store below.

Order the RSV4G40 – PKG from Annovi Reverberi Online.
Posted on

SRMW2.2G26-EZ pump from Annovi Reverberi

SRMW2.2G26-EZ pump from Annovi Reverberi

Order the SRMW2.2G26-EZ Pump from AR Pumps Online.

The SRMW2.2G26-EZ pump is a front mounted replacement pump for under the engine pressure washers.  This SRMW2.2G26-EZ is rated 2.2 GPM at 2600 PSI.  This unit will work on almost any store bought home owner style of pressure washer that you may have purchased from either Menards, Lowes or even The Home Depot.  These stores, in house repair centers actually stock this pump and its rear mounted facing cousin the SRMW2.2G-EZ-SX, to fix most of the pressure washers they stock.  So why not do what they do and use the SRMW2.2G26-EZ to fix your pressure washer by yourself.  This pump has a built in Easy Start system, making the cold start up of your pump a breeze and comes standard with a built in unloader and chemical injector. This unit comes filled with oil, so it’s as simple as taking off your broken pump, bolting this one on, hooking up your hoses and your pressure washing in no time flat.

SRMW2.2G26-EZ pump from Annovi Reverberi
SRMW2.2G26-EZ pump from Annovi Reverberi

 

A Few more things you might like to know about the  SRMW2.2G26-EZ pump:

  • This unit has a maximum horsepower of 5.2 GHP.
  • The pump has stainless steel plungers and an all aluminum set of valves and manifold.
  • An inlet port that is 3/4″ FGH style which is your standard garden hose type of mounting.
  • The outlet port on the  SRMW2.2G26-EZ pump is a twist connect style of mount measuring 22mm.
  • Pump speed has a maximum rating of 3400 RPM.
  • This pump has a 7/8″ hollow type shaft diameter.
Usually these pumps are cheap enough to just replace once they go bad and stop pumping, but if for some reason you want to try your hand at repairing the unit, you can find all the parts and kits you will need on the pump breakdown for the  SRMW2.2G26-EZ pump here.
SRMW2.2G26-EZ pump from Annovi Reverberi
SRMW2.2G26-EZ pump from Annovi Reverberi

Quick note, this pump can also be identified as the: SRWM, SRWM22G, SRMW22G26, SRMW2.2G or even the SRWM2.2G26.  No matter how it’s identified it’s the same 2.2 GPM at 2600 PSI Pump you will need for most pressure washers.  Have concerns? Give us a call and we can help you out. 1-877-824-7763 {Smart Phones Click to Call}

If your ready to repair you pressure washer yourself and save time and money order this pump online below.

Order the SRMW2.2G26-EZ Pump from AR Pumps Online.
Posted on

T991 Pump from General Pump

T991 Pump from General Pump.

Order the T991 Pump from General Pump.

The T991 is a powerful replacement Triplex style of pump from General Pumps.  The T991 is rated 4 gallons per minute with a maximum pressure rating of 1100 PSI.  For those of you that know General Pumps by their series this would be labeled a T Series 50 Pump.  This unit is so well built it is covered by a lifetime warranty from General Pump.  They put faith in the unit holding up, even under the harsh use most cleaners will put their pressure washers through.  General can do this because the forge the head of this unit completely out of brass, and use a specially formulated and die-cast anodized aluminum for the body.  Then, they couple this with solid ceramic plungers and packings or water seals that are totally self lubricating.  All of this, and more give you the peace of mind that your purchase of this pump will give you 1000’s of hours of work before you need to repair or even replace this part on your unit again.

T991 Pump from General Pump
T991 Pump from General Pump

Here are some basic specification of the T991 Pump:

  • The pump dimensions and weight are 9.3″ x 8.3″ x 5.4″  and 18.7 lb.
  • Crankcase has an non-detergent SAE 30W oil capacity of 15.2 oz.
  • Maximum speed of the item is 1750 RPM.
  • Horsepower minimum requirements are 3.6 BHP, that is 1.5 times greater for gas powered units.
  • A 165 degrees F. maximum liquid pump temperature.
  • This T991 Pump has a stroke and bore of .394″ (10mm) and .787″ (20mm).
  • The inlet ports is 1/2″ FPT and the one outlet port measures 3/8″ FPT.

 

This pump T991 is so well made its oil consumption is second to none.  In fact, General Pump recommends the following when it comes to your oil: “Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter”.

Should you need to repair this T991 pump you can find the parts breakdown by clicking here.
Pump T991 Triplex from General Pump.
Pump T991 Triplex from General Pump.

 

Do you have more questions about this unit?  If so, give us a call toll free:
1-877-824-7763 {Smart Phones Click to Call}

Or if your ready to purchase this powerful little pump, do so by clicking the link below to order online.

Order the T991 Pump from General Pump.
Posted on

XMA2.5G18E-F33 Pump from Annovi Reverberi

XMA2.5G18E-F33 Pump from Annovi Reverberi

Order the XMA2.5G18E-F33 pump from Annovi Reverberi.

The XMA2.5G18E-F33 is a 1750 RPM replacement pump from AR Pumps.  The XMA2.5G18E-F33 has a 2.5 Gallon per minute flow rate and a maximum PSI of 1800.  This is one of those Annovi Reverberi pumps that has been known to go by many other names on the market.  It’s been known to be called the XMA2.5G, XMA2.5G18, XMA2.5G18E, XMA, XMA25, XMA25G, XMA25G18, XMA25G18E and the XMA25G18E-F33.  Regardless of how it is identified, this is constructed like all the XM series of pumps with solid ceramic plungers, over sized bearings and forged brass heads to ensure longevity in the harsh conditions most pressure washers come up against. 

XMA2.5G18E-F33 Pump from Annovi Reverberi
XMA2.5G18E-F33 Pump from Annovi Reverberi

A few more specifications you may need before you purchase the XMA2.5G18E-F33 pump:

  • The unit has a 140° maximum liquid temperature that it can pump.
  • This pump has a  weight of 15 pounds and an oil capacity of 14 oz.
  • If you run metric the LPM is 9.5 and the BAR would be 120.
  • EBHP power rating of 3 is standard on this XMA2.5G18E-F33 pump.
  • The inlet and discharge threads are the standard measuring in at 1/2″ female and 3/8″ female respectively.
  • Stroke and bore are also industry standard, measuring in at 10.6mm and 15mm each.

 

If you already own an XMA2.5G18E-F33 pump and need parts to get it up and running for your business and workers, we sell all those parts and kits as well.  Click here to download and print off the official parts breakdown for this pump.
AR Pumps XMA2.5G18E-F33 Replacement Unit
AR Pumps XMA2.5G18E-F33 Replacement Unit

We are here to help you decide if you should replace or repair your pumps on your pressure washers.  Give one of our knowledgeable staff a call and we will guide you through the process of determining the best options for you and your business. Call 1-877-824-7763 {Smart Phones Click to Call}

Or you can order the replacement pump online by clicking below.

Order the XMA2.5G18E-F33 pump from Annovi Reverberi.
Posted on

SJV3G27D-EZ pump replacement from Annovi Reverberi

SJV3G27D-EZ pump replacement from Annovi Reverberi.

Order the SJV3G27D-EZ from AR Pumps Online.

The SJV3G27D-EZ is a standard replacement pump for your pressure washer.  This SJV3G27D-EZ pump has a flow rate of 3 gallons per minute or 11.4 liters per minute with a maximum PSI of 2700, that would be 186 BAR.  If your pressure washer can handle those specifications and can handle a pump that spins at 3400 RPM then this is the perfectly priced and one of the most well built replacement pumps you can buy today.  This pump comes with a lot of built in features making it almost a true bolt and go style of pressure washer pump.  The unloader comes already installed and the chemical injector also comes standard, and can be either fixed or of the adjustable type.  The SJV3G27D-EZ is designed to install easily on any gasoline powered pressure washer engine that utilizes a 3/4″ hollow shaft, and has a horse power rating of between 3.5 and 6.5.

SJV3G27D-EZ pump replacement from Annovi Reverberi
SJV3G27D-EZ pump replacement from Annovi Reverberi

A few other features you may need to know about the  SJV3G27D-EZ pump:

  • The crankcase oil capacity on the unit is 4.5 oz.
  • Inlet and discharge threads on this pump are 1/2″ and 3/8″ male type connections.
  • The weight in pounds on this SJV3G27D-EZ pump is 11.
  • This pump has an EBPH power rating of 5.2.
  • The stroke and bore of the item is 6.8mm and 15mm respectively.
  • A 140° maximum water or chemical temperature can be pumped through the unit.
Should you already own a SJV3G27D-EZ pump from Annovi Reverberi, and just need to repair it, we have everything you need to do that as well.  First you will need to know what parts you want to replace on the unit.  Go to the pumps, parts breakdown page here and see which parts you will need.  Then either call us at 1-877-824-7763 {Smart Phones Click to Call} or go online and order all the parts and kits you need.

If you wish to order this powerful pump you can do so online by clicking below.

Order the SJV3G27D-EZ from AR Pumps Online.
Posted on

5CP5120 CAT Pump – 5CP Plunger Pump

5CP5120 CAT Pump – 5CP Plunger Pump.

Order the 5CP5120 from CAT Pumps Online.

This plunger style pressure washer pump, the 5CP5120 from CAT Pumps is one of the more commonly used units on pressure washers today that require a strong flow and pressure rating.  Its 5 gallon per minute or 19 liters per minute flow rate make it one of the fastest pumps used in today’s cleaning industry.  The 5CP5120 has a pressure rating from 100 to a maximum of 3000 PSI or 7 to 120 BAR.  This pump has one of the fastest RPM in the industry with a top speed of 1415.  With all this power, it’s amazing that the pump itself only weights in at a slim 19.9 pounds or 9 kilograms.  It just goes to show you that powerful doesn’t always have to mean huge and heavy.  This pump will stand up to years of use and abuse even in the worst of situations.  It’s why CAT Pumps are sought after by pressure washer manufacturers.

5CP5120 CAT Pump - 5CP Plunger Pump
5CP5120 CAT Pump – 5CP Plunger Pump

 

Here are some other features of the 5CP5120 CAT Pump:

  • The dimensions of the pump are 10.35 x 10.0 x 5.78” (263 x 254 x 147mm).
  • If you add a gear box the dimensions become 10.5 x 12.4 x 6.4” (267 x 315 x 162mm).
  • The 5CP5120 has an inlet pressure range of -2.5 to 60 psi  or -.2 to 4 bar.
  • A 17 oz. or 0.51 L. crankcase oil capacity is one of the largest on this style of pump.
  • The two inlet and two discharge ports measure 1/2” NPTF and 3/8” NPTF respectively.

 

This pump is great for higher temperatures, it has a maximum temperature range of 160°F or 71°C.  As with most CAT Pumps it’s best to check with CAT should your temperatures routinely go over 130°F.  It connects to your pressure washer via a 0.787” or 20 mm shaft diameter.  The stroke and bore on this 5CP512 measure 0.709” (18 mm).

Need parts to fix your 5CP5120 Pump?  Click here for the part breakdown.  If you lost your service manual we have you covered for that as well.  Click here for this pumps service manual.

Parts Breakdown of the CAT 5CP5120 Pump
Parts Breakdown of the CAT 5CP5120 Pump

 

Do you have more questions about the 5CP5120 CAT Pump?  Give us a call today:
1-877-824-7763 {Smart Phones Click to Call}

If your ready to order the pump click the link below to order directly from our online store.

Order the 5CP5120 from CAT Pumps Online.

Posted on

General Pumps EZ4040G Replacement Pressure Washer Pump

Today’s blog will be about the General Pumps EZ4040G Pressure Washer Replacement Pump.

Order the EZ4040G Online.

If your pressure washer uses a gas flanged General Pump odds are it’s the EZ4040G unit.  This unit is used on a lot of industrial pressure washers because of its strength and durability for everyday cleaning use.  The EZ4040G has a powerful rating of 4000 PSI at a industry standard 4 gallons per minute.  With an added 3400 RPM maximum pump speed you will be enjoying this units life for years and years.

 

General Pumps EZ4040G Pressure Washer Pump
General Pumps EZ4040G Pressure Washer Pump

Here is some technical data you should be aware of for the EZ4040G:

  1. The stroke and bore of this pump both measure 13mm.
  2. 14 oz. oil capacity on the crankcase is one of the larger ones on the market today.
  3. This EZ4040G has a 165 F degree maximum on the fluid it’s pumping.
  4. Comes with a 1/2″ FPT inlet port and a 3/8″ FPT outlet connection standard.
  5. It has a 1″ hollow shaft and weighs in at just around 20 pounds.
  6. Finally to know if it will fit the space you need it has measurements of 8.8″x9.7″x6.5″.

 

If you need more information on the EZ4040G pump click here for the General Pump Breakdown.

The EZ4040G has a very special one piece plunger designed to prevent captivation and thermal shock with an innovative bonding process of the pumps plungers.  This replacement pump is made to fit on pressure washers with gasoline engine speeds up to 16 HP via a standard SAE J609 mounting flange.  With a brass forged manifold and all anodized and die cast aluminum crankcase the unit is going to last you a long time before you have to replace it again.  Another long life feature of the EZ4040G pump is the use of stainless steel for all of the outlet and inlet ports, making the everyday wear and tear of connecting and disconnecting the pump less destructive to these ports.

Is this the pump for you?  Give us a call to order the EZ4040G pump from General Pumps: Call 1-877-824-7763 {Smart Phones Click to Call}

 

If you prefer feel free to order the EZ4040G replacement pump from General Pumps Online as well.

Posted on

The TS2021 General Pumps Pressure Washer Pump.

The following is a detailed blog about the TS2021 Pressure Washer Pump From General Pumps.

Order the TS2021 Pressure Washer Pump from General Pumps Online here.

 

The TS2021 is a replacement triplex series 47 pressure washer pump from General Pumps.  Like all of the series 47 pumps from General it comes with the standard power an precision one expects from a pump of this size.  The TS2021 has a maximum PSI of 3500 with a flow rate of 5.6 gallons per minute. This combined with a 1450 rounds per minute make this pressure washer replacement pump the ideal choice for your machine.

TS2021 General Pumps Pressure Washer Pump
TS2021 General Pumps Pressure Washer Pump

 

Here are some important features you may need to know about the TS2021 Pump:

  1. The TS2021 has one of the largest crankcase oil capacity of 40.6 ounces.
  2. The 1/2″ FPT Inlet port and the 3/8″ FPT Outlet port are industry standards for this size replacement pump.
  3. A 165 degrees F. maximum liquid temperature make it ideal for pressure washers used in the cleaning circles.
  4. With a weight of 32 pounds and dimensions of 12.2″ x 9.2″ x 6.9″ make this replacement pump a superior fit for most pressure washers on the market today.
  5. Oil changing is only required about once every 500 hours or 3 months of in use service which ever comes first.  This is after the very first oil change which should be done after the initial 40 hours of run time.
The TS2021 Exploded View of Parts
The TS2021 Exploded View of Parts

Do you need just parts for your TS2021 Pump?  Click Here for a parts breakdown.

This TS2021 pump from General pump comes with a lifetime warranty on the head of the pump which is made from forged brass.   The crankcase is tough and rugged being made of a die cast anodized aluminum, with one of the largest capacities of pumps of this power and size.  The tapered roller bearings are made from the most heavy duty materials and the ceramic plunger rods are always being lubricated with the packings to give you the most from your purchase of this replacement pump.

If you need the “L” version of this pump one is available from General Pumps as well. Click here for the “L” version of the TS2021 pump.

Do you have any more questions we didn’t cover here? Give us a call and we will be happy to assist you in your search for a replacement pump for your pressure washer: Call 1-877-824-7763 {Smart Phones Click to Call}

If your ready to order the TS2021 Pump click below.

Order the TS2021 Pressure Washer Pump from General Pumps Online here.

Posted on

General Pump TS1511 T Series Pressure Washer Pump

Here is a little more information on the General Pump TS1511 T Series Pressure Washer Pump

Click here to order the General Pump TS1511

This 47 series T pump from General Pumps is one of the best pumps on the market made specifically for the cleaning industry. The TS1511 pump has a powerful 4 gallon per minute rating with a PSI of up to 3500 making it the perfect pump for all your cleaning needs.

General Pump TS1511 T Series Pressure Washer Pump
General Pump TS1511 T Series Pressure Washer Pump

 

The General Pump TS1511 T Series Pressure Washer Pump comes with an industry exclusive lifetime warranty on the manifold which is made of strong forged brass.  The pump has one of the largest crankcases with a 40.6 oz capacity and is made of anodized die cast aluminum.  This pump from General pumps also has completely solid  ceramic plungers that are constantly being lubricated by the TS1511 pumps packings.

Other Features on the TS1511 Pump from General Pumps:

  1. This pump has 1/2″ FTP inlet ports and outlet ports that measure 3/8″ FTP.
  2. The 6.8 bhp or 10.3 hp (gas) is the bare minimum horsepower you need to power this pump.
  3. The TS1511 is also able to be purchased in a “L” type verison. More information here.
  4. The pump has a .787″ or 20mm bore dimension and a stroke dimension of .472″ or 12mm.
  5. It’s shaft diameter is a profound .945″ or 24mm.
  6. The dimensions and weight of this pump are 12.2″ x 9.2″ 6.9″  and 32.0 lbs. respectively.

 

Oil consumption and break in period for a new TS1511 Pump from General Pumps:

You will need to fill the oil crankcase after unpacking and installing this pump to the oil gauge indicator DOT found on the oil gauge window with a non-detergent SAE 30 weight oil.  Then after about 40 hours of you using the pump you will need to drain the oil from the pump and refill with new oil of the same specifications above.  After this initial 1st time period you shouldn’t have to redo the oil until either 500 hours of use or 3 months have passed.

Need more technical data or parts breakdown on the General Pump TS1511 pump?

Click here for Parts Breakdown

If you need any more information or help with this pump from General Pumps please give us a call at:
Call 1-877-824-7763 {Smart Phones Click to Call}

Or if your ready to order the TS1511 pump you can call the number above or,

Click here to order the General Pump TS1511

Posted on

Direct Drive Pressure Washer Pump SRMW2.2G26-EZ-SX from Annovi Reverberi

Here is a quick spotlight on the Annovi Reverberi Pressure washer pump SRMW2.2G26-EZ-SX

CLICK HERE to order the SRMW2.2G26-EZ-SX Pump

 

AR North America proudly presents the Italian made SRMW2.2G26-EZ-SX from Annovi Reverberi.  This is a direct drive rear mounting pump that has the strong power you need on your pressure washer with a rating of 2.2 gallons per minute and a PSI of 2600.  This is a vertical mounting pump that will attach to the under side of your pressure washers engine.

AR North America SRMW2.2G26-EZ-SX pump from Annovi Reverberi
AR North America SRMW2.2G26-EZ-SX pump from Annovi Reverberi

A few more features of this SRMW2.2G26-EZ-SX pump from Annovi Reverberi are:

  1. It has a 3400 RPM maximum pump speed for awesome performance.
  2. The SRMW2.2G26-EZ-SX pump comes standard with a chemical injector and a built in unloader.
  3. The 5.2 GPH is the maximum horsepower you will need to run this pressure washer pump.
  4. It has garden hoses sized inlet ports of 3/4″ FGH threads, and twist type connecting 22mm outlet ports for ease of connection.
  5. It comes standard with plungers made of stainless steel and it’s valve plugs and manifold are made from the toughest aluminum.
  6. Finally the SRMW2.2G26-EZ-SX pump from Annovi Reverberi comes filled with oil so it’s ready to go when you are and weighs in at only 5.1 pounds.

A few more things you may need to know about the SRMW2.2G26-EZ-SX pump:

The pressure washer pump is made to fit a host of pressure washer like (but not limited to) Briggs Power Products, Brute, Craftsman, John Deere, Troybilt, and other pressure washers of this type.  You need to remember it is a back mounting pump that is rotated 180º.  Also please note that this pump will not work on any Karcher pressure washers that have the hex style of bolting to the drive directly style. Finally the SRMW2.2G26-EZ-SX pump has a 3 to 6 horse power gas flange with a vertical mount.

 

If you need any other information on this SRMW2.2G26-EZ-SX pump from Annovi Reverberi please don’t hesitiate to give us a call at: Call 1-877-824-7763 {Smart Phones Click to Call}

Or if your ready to order it you can do it online now.

To order the SRMW2.2G26-EZ-SX Pressure Washer Pump from AR North America and Annovi Reverberi

CLICK HERE to order the SRMW2.2G26-EZ-SX Pump