The RTX100 Pressure Washer Pump from Annovi ReverberiFeatures:
GPM: 26.4
MAX L/Min: 100
MAX PSI 1800
Max BAR 124
Power EBHP 33
Bore DIA 36
Stroke DIA MM 23
Crankshaft 3
The AR Annovi Reverberi Pressure Washer Pump RTX100 features a forged nickel plated brass strength manifold with no porosity for long life. The plungers of the AR Annovi Reverberi Pressure Washer Pump RTX100 as a special aluminum oxide blend, with solid ceramic for long life and strength durability. The bearings are Over sized for load disbursement. The Oil seals are constructed of Buna-N Rubber. The o-rings have stainless steel garder springs to assure tension on the sealing surface. The plunger rods on the AR Annovi Reverberi Pressure Washer Pump RTX100 are made of stainless steel and the connecting rods are a heavy two piece aluminum, over sized for maximum strength , load disbursement and life. The crankshafts on the AR Annovi Reverberi Pressure Washer Pump RTX100 are forged and heat treated to add strength, durability and long life of these pumps from Annovi Reverberi.
List Price: $3,627.12 Our Price: $2,239.86 Click here to order this Pressure washer pump today! You save $1,387.26! Availability:: Available for Order Product Code: RTX100
Price subject to change on the RTX100 Pressure washer pump from Annovi Reverberi
Motor Ranges for the 1XP Series Line from CAT Pumps:
HP: 1/3, 1/2, or 3/4
Type: Induction (AC), ODP
Max. Volts: 115/230
Hz: 50/60
RPM: 1450/1750
Phase: Single
Service Factor: 1.35
Start: Capacitor
Recognized: CE, UL, and CSA
1XP Series
Brochure for the CAT Pump 1XP
Service Manual for the CAT Pump 1XP
CAT Pumps just announced the new CAT Pump 1XP series pump. These CAT Pump 1XP series pumps are specifically built for the portable extractor market, the new 1XP series pumps were designed and tested to be the most reliable portable extractor pump on the market. With a performance window of 0.5 – 2.0 gpm and 100 – 800 psi, the CAT Pump 1XP series pumps will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
Cat Pump 1XP Series Plunger Pump
The CAT Pump 1XP series pumps are equipped with a patented grease-less design and innovations to improve product life, serviceability, and performance. This and an overall compact package give our customers the flexibility when designing their own equipment. All this backed by Cat Pumps leading customer service and product availability.
CAT Pump 1XP Series Plunger Pump Video from CAT
Typical Applications for this Cat Pump 1XP Series Plunger Pump:
With a performance window of 1.25 gpm and 400 psi, the 1XP125.031 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 1.50 gpm and 325 psi, the 1XP150.031 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 2.0 gpm and 250 psi, the 1XP200.031 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 0.50 gpm and 800 psi, the 1XP050.031 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 0.75 gpm and 650 psi, the 1XP050.031 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of .85 gpm and 800 psi, the 1XP085.051 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 0.5 – 2.0 gpm and 100 – 800 psi, the 1XP100.051 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 1.25 gpm and 600 psi, the 1XP125.051 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 1.50 gpm and 500 psi, the 1XP150.051 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 2.00 gpm and 400 psi, the 1XP200.051 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 1.25 gpm and 800 psi, the 1XP125.071 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 1.50 gpm and 700 psi, the 1XP150.071 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
With a performance window of 2.00 gpm and 500 psi, the 1XP200.071 series will also be a great fit for other applications including misting, hydrostatic testing, and truck mounts.
CAT Pump 1XP Series Carpet Extractor Pump Operation
The Cat Pump 1XP Series is THE Best Extractor Pump Available
• Designed to fit extractor space and foot print
• Developed to be the longest lasting extractor pump available
• Supported with Cat Pumps’ industry-leading customer service
• Strict quality control process ensures consistent reliability
The Cat Pump 1XP Series is Easily Primed
• Self-Priming – just turn it on.
• Cat Pumps’ exclusive Super Flow
The Cat Pump 1XP Series is has a Patented Grease-less Design
• Grease-less = no maintenance
• Grease-less = no grease stains
• 100% sealed wet end = no leakage
This The Cat Pump 1XP Series has Solid Ceramic Plungers
• Improved Seal Life – ceramic won’t score like stainless steel plungers
• Ceramic plungers don’t require changing when replacing seals
Conveniently located Ports are a staple on this Cat Pump 1XP Series
• Easy to assemble and maintain
• Improved Inlet conditions
This pump Proven High-Pressure Seals
• Consistent quality
• Life measured in thousands of hours
This Cat Pump has Keyed Shaft
• Pump can operate with clock-wise or counter clock-wise motor rotation
• Stronger than a threaded connection
The Cat Pump 1XP Series comes with an Industrial Motor
• CE, UL and CSA Recognized
• Dual voltage
• 50 or 60 Hz
The Cat Pump 1XP Series is Easy to Drain
• Faster service
• Less mess
Prices on the CAT Pump 1XP Series Plunger Pump subject to change.
SXMA3G35E-F17 AR Annovi Reverberi Pressure Washer Pump
SXMA3G35E-F17 AR Annovi Reverberi Pressure Washer Pump
SXMA3G35E-F17 AR (Annovi Reverberi) Pump 3 GPM @ 3500 PSI.
SXMA3G35E-F17 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass heads with a bayonet style sight glass in the rear and side covers. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium SKF tapered roller bearings and the precision die-cast supports on the SXMA3G35E-F17 assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material over sized for maximum strength and load disbursement. Spinning at 1750 RPM, this SXMA3G35E-F17 pump was designed to deliver 3GPM at 3500 PSI.
The SXMA3G35E-F17 AR Annovi Reverberi Pressure Washer Pump has the following specifications:
Max Flow (in GPM): 3.0
Max Flow (in L/Min): 11.4
Max Pressure (in PSI): 3500
Max Bar: 240
Power EBHP: 7.0
Bore Dia: 15mm
Stroke: 13.2mm
Crankshaft ID Stamp: 3
Pump Speed (in RPM): 1750
Shaft Diameter: 1-1/8″ hollow
The SXMA3G35E-F17 AR Annovi Reverberi Pressure Washer Pump has the following Features:
Manifold:
– Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
– Inlet and Discharge Ports: Heavy bosses for added strength.
– Offset Discharge Ports: High efficiency, smooth flow.
– Bolts: Eight bolts, 6mm, grade 12.9.
SXMA3G35E-F17 Valves:
– Ultra Form Cages: Durability, strength and long life.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps of the SXMA3G35E-F17: Machined brass – greater strength.
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
– Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase on the SXMA3G35E-F17: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods of the SXMA3G35E-F17: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
List Price: $768.30 Our Price: $479.97 Click to order the SXMA3G35E-F17 AR Annovi Reverberi Pressure Washer Pump You save $288.33! Availability:: available for order Product Code: SXMA3G35E-F17
Price Subject to change on the SXMA3G35E-F17 Pressure washer pump from Annovi Reverberi.
• The CAT Pump 66DX40G1I has a Triplex plunger design that provides a smooth liquid flow.
• Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
• Compact flange mount permits easy, direct mounting to most gas engines of this CAT Pump 66DX40G1I.
• Modular Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
• Fixed Chemical Injector is standard and mounts directly onto Unloader to provide cleaning flexibility.
ETS BOLT-N-GO PUMP SPECIAL! THIS PACKAGE CONSISTS OF ONE CAT 66DX40 PUMP WITH UNLOADER AND PLUMBING (THERMAL RELIEF VALVE, GARDEN HOSE FITTING AND HIGH PRESURE QUICK COUPLER PLUG), 4 GPM @ 4000 PSI, IDEAL FOR 9, 11 OR 13 HP ENGINES, WITH CAT PULSAR3KHPEZ UNLOADER.
List Price: $1,225.00 Click the link to ORDER TODAY or… Call 1-877-824-7763 {Smart Phones Click to Call}
For a BETTER PRICE WE ARE NOT ALLOWED TO LIST ONLINE for this CAT Pump 66DX40G1I – Direct-Drive Plunger Pump Availability:: Available for Order Product Code: 66DX40G1I
Is this CAT Pump 66DX40G1I not the correct CAT Plunger Pump for your pressure washer? Click the link to see more CAT Plunger Pumps from ETS Company.
Price subject to change. Price valid on this CAT Pump 66DX40G1I – Direct-Drive Plunger Pump 10/08/2012.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump
AR Annovi Reverberi Pressure Washer Pump RMW2.5G28-EZ, 2800PSI, 2.5GPM Annovi Reverberi Direct Drive Pump (Back Mount)
SKU: RMW2.5G28-EZ
Brand: Annovi Reverberi – AR North America
We do not have any mfg cross reference information available. However, RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
• RMW pumps have a standard 22mm-14 twist connect outlet.
• Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump Features:
Annovi Reverberi / AR North America RMW2.5G28-EZ-SX, RMW 25G28-EZSX, RMW 2.5G28-EZSX Vertical Radial-Axial series replacement pump (Mounts under the engine)
Axial Cam Pump with Easy Start is smooth starting and maintenance free
Free thermal valve included with pump
Fits many models and units made by Briggs Power Products ( Brute, Craftsman, Generac, John Deere, Power Boss, Troy-Bilt, Etc.)
Note: This pump is Back Mounted and turned 180º (see 2nd picture) and is mostly used on pressure washers made by Briggs Power Products
NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump Specifications:
Vertical Mount with Gas Flange 3-7 HP
Max. Volume: 2.5 GPM
Max. Discharge Pressure: 2,800 PSI
Max. Pump Speed: 3,400 RPM
Shaft Diameter: 7/8” Hollow
Built In unloader and chemical injector
Built In easy start valve
Maximum Horsepower Requirements: 6.5 GHP
Inlet Port: 3/4″ FGH (garden hose)
Outlet Port: 22mm (Twist Connect)
Brass manifold
Stainless steel plungers
Pump comes with oil
See optional items below
Note: Engine shafts longer that 2” will require spacers or washers
Availability:: available for order Product Code: RMW2.5G28-EZ
Price subject to change. Price valid on this RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump, Use code 5off for 5% off all orders over $50.00
SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump.
SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump
This AR SJV2.5G25D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJV2.5G25D-F7 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
The SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump has the following Specifications:
Max GPM………………2.5
Max LMP…………………………9.5
Max PSI………………….2500
Max Bar………………………….170
Power EBHP……………4.5
Bore Dia. mm…………………….15
Stroke mm……………….5.8
Weight Lbs………………………..11
Max Temp……………….140°
Oil Capacity………………………4.5oz
Inlet Thread ……………1/2”M
Discharge Thread……………….22mm
SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump
This SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump Features:
Manifold of the SJV2.5G25D-F7:
Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
Bolts: Three bolts, 10mm, grade 8.8.
Valves:
Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps of the SJV2.5G25D-F7: Machined brass for greater strength.
Packing and Plungers:
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing on the SJV2.5G25D-F7 retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
List Price: $430.00 Our Price: $288.53 Click to purchase the SJV2.5G25D-F7 pressure washer pump HERE! You save $141.47! Availability:: available for order Product Code: SJV2.5G25D-F7**
Price subject to change. Price valid on the SJV2.5G25D-F7 pressure washer pump 9/24/2012
Is this HR3030-113H GIANT PUMPS Triplex Ceramic Plunger Pump not the right Giant Pump for your Pressure Washer? Click the link to see all our Giant Pressure Washer Pumps.
The HR3030-113H GIANT PUMPS Triplex Ceramic Plunger Pump Features:
List Price: $375.00 Our Price: $288.56 Click the link to order this HR3030-113H GIANT Pump You save $86.44! Availability:: available for order Product Code: GIANT-HR3030-113H
Price subject to change. Price valid on this HR3030-113H GIANT PUMPS Triplex Ceramic Plunger Pump 9/17/2012
SXWA7G50 AR Annovi Reverberi Pressure Washer Pump.
SXWA7G50 AR Annovi Reverberi Pressure Washer Pump
SXWA7G50 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material over sized for strength and load disbursement. These SXWA7G50 pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
The SXWA7G50 AR Annovi Reverberi Pressure Washer Pump has the following specifications:
Max GPM………………7
Max LMP…………………………26.5
Max PSI………………….5000
Max Bar………………………….345
Power EBHP……………24
Bore Dia. mm…………………….18
Stroke mm……………….21
Weight Lbs………………………..35
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
The SXWA7G50 AR Annovi Reverberi Pressure Washer Pump Features:
Manifold:
– Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety, performance.
– Inlet and Discharge Ports: Heavy bosses for added strength.
– Offset Discharge Ports: High efficiency, smooth flow.
– Bolts: Eight bolts, 10mm, grade 8.8.
Valves:
– Ultra Form Cages: Durable, strength, and long life.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Forged. Patented Valve Cap Design
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
– Support and Guides: Machined brass, 2-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement
Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cross head for strength, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: Heavy 2-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 32 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180ºF. Refer to breakdown.
Wet End Repair: Very simple no special tools required.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Items NOT INCLUDED with your SXWA7G50 AR Annovi Reverberi Pressure Washer Pump that you may need:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
You save $598.23! Availability:: available for order Product Code: SXWA7G50
Price Subject to change. Price valid on the SXWA7G50 AR Annovi Reverberi Pressure Washer Pump 9/10/2012
• The CAT Pump 2SFX29EL has a Triplex design that provides smoother liquid flow.
• Ultimate portability—less than 12 pounds—less than 10″ long.
• Your choice of motorized unit or hollow shaft pump only for direct mounting of the CAT Pump 2SFX29EL to gas or electric motor.
• Regulating Unloader with By-pass Hose is standard on each 2SFX29EL pump to assure system pressure control and pump protection.
• Optional Thermo Valve mounts directly into by-pass hose for optimum heat protection while in by-pass.
2SFX29ELS CAT Pump – Direct-Drive Plunger Pump
This 2SFX29ELS CAT Pump – Direct-Drive Plunger Pump Features:
Inlet Pressure Range…………. Flooded to 75 PSI (Flooded to 5.25 BAR)
Bore ………………………………… 0.708″ (18 mm)
Max. Liquid Temperature ……. 160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Crankcase Capacity ………….. 11.83 oz. (.35 L)
Inlet Ports (1) ……………………. 3/8″ NPTF (3/8″ NPTF)
Discharge Ports (2)……………. 3/8″ NPTF (3/8″ NPTF)
By-pass Port …………………….. 1/4″ NPTF (1/4″ NPTF)
Weight (Pump Only) ………….. 11.83 lbs. (4.8 kg)
Dimensions (Pump Only)……. 9.13 x 6.65 x 6.50″ (232 x169 x165mm)
Is the 2SFX29ELS CAT Pump – Direct-Drive Plunger Pump not the right plunger pump for your pressure washer? Click the link to see all out Plunger Pressure Washer Style Pumps.
Hydraulic Ports: 7/8″ 14UNF #10 SAE (on GM Series)
Motor: Internal Gear Gerotor
Hydraulic Motor Seal: Double-lip Teflon
Maximum flow: 63 GPM
Maximum pressure: 105 PSI
Maximum Hydraulic Flow: 3 GPM
Maximum Motor pressure: 3000psi
Maximum fluid temperature: 140° F | 60° C
Weight: 26 lbs / 11.8kg
HYPRO 9302ST-GM1 Centrifugal Pump
Is the HYPRO 9302ST-GM1 Centrifugal Pump not the correct pump for your needs? Click the link to see all our Hypro Pumps at Shopetsonline.com
List Price: $1,830.00 Our Price: $1,183.79 Click the link to order this Hypro Pump You save $646.21! Availability:: available for order Product Code: 9302ST-GM1
Price subject to change. Price valid on the HYPRO 9302ST-GM1 Centrifugal Pump 8/21/2012.
