Category: pressure washer pumps

Posted on

Annovi Reverberi XM / SXM Series Pumps – XMV3G27D-F25

XM / SXM Series Pumps – Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems. Flows: 2.9 to 4 GPM Pressure to: 3500 PSI Speeds: 1450, 1750, 3400 rpm Shaft Styles: Solid Shaft 24mm, 3/4″, Hollow Shaft 5/8″, 3/4″ 1″, 1-1/8″, Tapere.

PUMP MADE READY
FULLY PLUMBED AR XMV3G27D-F25

PUMPS MADE READY ARE NOT TESTED PRIOR TO SHIPPING.  THE UNLOADER AND PRESSURE RELIEF VALVE MAY NEED ADJUSTING BEFORE USAGE.  TESTING IS AVAILABLE ON 3400 RPM PUMPS MADE READY.

Features

Posted on

CAT Pump 270

CAT Pump 270 – Triplex Plunger Pump

CAT PUMPS® TRIPLEX PLUNGER PUMPS are designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Widely used in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and many more. CAT PUMPS® are the “Pumps with Nine Lives”. Standard Features Include: High pressure seals that are lubricated and cooled by the solution being pumped • Oil-bath crankcase • Heat treated valves and seals • Forged brass or stainless steel manifolds • Solid ceramic plungers • Exclusive high pressure seal design • Rated to from 140° to 160° F. depending on the model. Seal options up to 180° F. available • Wet ends can be serviced without entering the crankcase.

Alternate Specifications

  • Flow* …………………………………………………………4.25 GPM (16 L/M)
  • Pressure Range ………………………………….100 to 1000 PSI (7 to 70 BAR)
  • RPM………………………………………………………….1725 RPM (1725 RPM)
  • Stroke ……………………………………………………………..0.512″ (13 mm)
  • *This specification for intermittent, freshwater duty.COMMON SPECIFICATIONS
  • Bore ………………………………………………………………..0.709″ (18 mm)
  • Inlet Pressure Range ………………………..Flooded to 60 PSI (Flooded to 4 BAR)
  • Crankcase Capacity …………………………………………..15 oz. (.45 L)
  • Maximum Liquid Temperature……………………………..160°F (71°C)
  • Above 130°F call Dultmeier at 1-888-677-5054 for inlet conditions and elastomer recommendations.
  • Inlet Ports (2)………………………………………………1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2) ……………………………………..3/8″ NPTF (3/8″ NPTF)
  • Pulley Mounting………………………………………….Either Side (Either Side)
  • Shaft Diameter………………………………………………….0.650″ (16.5 mm)
  • Weight ………………………………………………………….13.9 lbs. (6.3 kg)
  • Dimensions……………………………………10.22 x 8.78 x 5.30″ (259.5 x 223 x134.5 mm)
Quality MaterialsPrecision design 304 stainless steel valves and seats are hardened
and polished for ultimate seating and extended valve life.

Brass manifold is strong and corrosion resistant.

Special concentric, high-density, polished, solid ceramic plungers
provide a true wear surface and extended seal life.

Specially formulated, CAT PUMP exclusive, Hi-Pressure Seals
offer unmatched performance and seal life.

Die cast aluminum crankcase provides high strength, minimum
weight and precision tolerance control.

Chrome-moly crankshaft gives unmatched strength and surface
hardness.

Oversized crankshaft bearings with greater capacity mean longer
bearing life.

Easy Maintenance

Wet-end is easily serviced without entering crankcase, requiring
less time and effort.

Preset packings mean no packing gland adjustment is necessary,
reducing maintenance costs.

Click Here for CAT Pump 270 Pump Breakdown

Click here for CAT Triplex Plunger Pump Service Manual

List Price: $897.68
Our Price: $690.76

Posted on

XTV3G22E-F8 AR – Annovi Reverberi Pump

XTV3G22E-F8 AR  – Annovi Reverberi Pump

Features

  • Triplex Plunger Pump
  • Direct Drive with Electric Flange NEMA 56C
  • Max. Volume: 3.0 GPM
  • Max. Discharge Pressure: 2,200 PSI
  • Max. Pump Speed: 3400 RPM
  • Shaft Diameter: 5/8” Hollow
  • Minimum Horsepower Requirements: 4.5 BHP
  • Max. Fluid Temp.: 160 degrees F.
  • Inlet Ports (2): 1/2″ BSP
  • Discharge Ports (2): 3/8″ BSP
  • Drive Side: Standard right
  • Forged brass head & valve covers
  • Solid ceramic plungers
  • Weight: 9.0-11.0 lb2200PSI, 3.0GPM Annovi Reverberi Direct Drive Pump
  • Replaces the following:
    Hypro Model #: 2269B-A
    Max Flow (in GPM): 3.0
    Max Pressure (in PSI): 2200
    Pump Speed (in RPM): 3400
    Shaft Diameter: 5/8″, Hollow
  • Cat Model #: 2SFX30GES
    Max Flow (in GPM): 3.0
    Max Pressure (in PSI): 2000
    Pump Speed (in RPM): 3400
    Shaft Diameter: 5/8″, Hollow
  • Cat Model #: 2DX27ES.MIST
    Max Flow (in GPM): 2.7
    Max Pressure (in PSI): 2000
    Pump Speed (in RPM): 3450
    Shaft Diameter: 5/8″, Hollow

List Price: $647.15
Our Price: $405.39 Click To Purchase XTV3G22E-F8 AR (Annovi Reverberi) Pump
You save $241.76!

Posted on

Before you replace your pressure washer at Home Depot or Lowes, Call ETS First…

ETS (Equipment Trade Service Company) Has been in the Industrial Cleaning Supply / Pressure Washer / Pressure Washer Pump business since 1970! We have been selling, repairing and replacing Pressure Washers, Pressure Washer Pumps and Accessories since before Home Depot and Lowe’s were what they are today! This country was built on small independent companies shoulders like ETS Co. The Big Box stores like Home Depot and Lowe’s were a product of our hard work, not WHAT got us here.

Next time your pressure washer gives you trouble or your pressure washer pump stops working, before you run to the home depot or Lowe’s, give us a chance to quote you. You will find we are very competitive in price and repair with these types of mega stores. While they may have every product known to man under the sun, they lack the specific knowledge to help you with your direct needs. Our repair and sales teams have over 40 years of pressure washer knowledge and know how. The big box stores have teenagers on their summer jobs trying to sell you parts that will determine how well your pressure washer works for you for years to come. Think about.. then give us a call 1-877-824-7763 or visit us online at etscompany.com

Posted on

Free Pressure Washer Pump Repair Estimate*

FREE PUMP REPAIR ESTIMATE*

Call our service department at 1-877-824-7763 x 120 to discuss ETS Co repairing your pressure washer pump.  Ship it to us via UPS /FedEX (trackable service) **, ETS will estimate your pump, call you for repair approval and ship it back to you.

* Estimate is free to customers who choose to have ETS Co. Repair their pump
** Customers are responsible for shipping costs to and from ETS Co.
Posted on

CAT Pump 67DX39G1I – Direct Drive Plunger Pump

CAT 67DX39G1I Direct Drive Plunger Pump

This is a direct-drive triplex plunger pump, constructed of a brass manifold, 304SS stacked valve assemblies, solid ceramic plungers and standard NBR (Buna-N) o-rings, Lo-Pressure seals and V-packings.  This high performance, economy pump is a flange-mount, hollow-shafted pump designed to bolt directly to a gas engine drive, providing an easy, compact installation.  This pressure washer pump comes standard with an integral Regulating unloader and fixed chemical injector.

– Triplex plunger dsign provides a smooth liquid flow

– Special concentric, high-density, polished solid ceramic plungers provide a true wear surface and extended seal life.

– Built-in flange mount for easy, direct mounting to most gas engines.  Eliminates the need for pulleys, belts, gearboxes.

– Integral Regulating Unloader with built-in by-pass is standard for safety and pressure setting.

– Stacked stainless steel valve design for long life and easy servicing.

– Fixed Chemical injector is standard and mounts directly onto Unloader to provide cleaning flexibility.

Features

  • 3.9 GPM
  • 4000 PSI
  • 3450 RPM
  • 1″ Hollow Shaft
  • Crankcase capacity 13.5 oz
  • Built-in unloader and fixed chemical injector

CAT Pump 67DX39G1I Pump Breakdown Click Here.

Click Here to Purchase the CAT 67DX39G1I Pump

Posted on

Before you buy a New Pressure Washer from Home Depot or Lowe’s. Check out about Replacing your pump!

Before you buy a New Pressure Washer from Home Depot or Lowe’s. Check out about Replacing your pump!

Shopetsonline has 1000’s of pumps for all types of pressure washers:

ANNOVI REVERBERI CAT PUMPS
COMET PUMPS GENERAL PUMP
GIANT PUMP HYPRO
MI-T-M BOLT-N-GO PUMP SPECIALS
UNICO PUMPS

So if that pressure washer you purchased from Lowes or Home Depot stops working, Check us out first to see if our staff can help you get it back in working order with out having to purchase a whole new unit for the big box stores like lowe’s or home depot.

Pressure Washer Pumps and Accessories

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
Posted on

Annovi Reverberi XT 1750 rpm N Version Pumps

AR – Annovi Reverberi XT 1750 rpm N Version 24mm Solid Shaft

Max Max Power Bore Stroke Weight
Model GPM PSI EBHP Dia mm mm Lbs.
XTA2G15 2.11 2000 3 15 9.6 10
XTA2G22 2.11 2200 3 15 9.6 11
XTA3G16 3 1600 3 18 9.6 10
XTA3G19 3 1900 4 18 9.6 11
XTA3G22 3 2200 4.5 18 9.6 11

XT 1750 Pump Break Down Click Here.

For all Annovi Reverberi Pump Breakdowns click here.

To Order Annovi Reverberi XT 1750 N Version Pumps Click here.

Posted on

Direct Drive Pressure Washer Pump Removal

Direct Drive Pressure Washer Pump Removal
The following steps will assist you in removing your pump from your gas
engine or electric motor on your pressure washer.
1. To start the process, spray a few drops of penetrating oil onto the top groove
or two small rectangular slots on the sides of the pump flange.
2. Remove the mounting bolts and washers securing the pump to the drive.
3. Loosen set screw.
4. Insert a flat head screwdriver into the two opposing slots on the mounting
flange and pry pump from gas engine or electric motor. Apply only reasonable
pressure. Do not force separation.
5. If pump resists the separation, insert two full threaded screws into the two
special holes in the pump mounting flange. Thread in deep enough to make
contact with the gas adapter plate or electric motor face. Then continue to thread
in the bolts in an alternating pattern to separate the pump from the drive. Apply
only reasonable torque. Do not force separation.
6. A strong bond may develop in any direct drive installation and may increase
with heavy duty operation and time. It may be necessary to repeat one or more of
these steps.
NOTE:
To ease the stress of future repairs, make a habit of removing the pump and
applying anti-seize lubricant on a semiannual basis. With the heat that is
generated in the crankshaft area, anti-seize won’t last forever.

With the pump removed, apply a moderate layer of anti-seize lubricant to the
pump’s crankshaft and a small bead of high-heat caulk around the middle of the
motor or engine’s crankshaft to seal out any moisture to the coupling.
To purchase Anti-Seize Lubricant, see:
http://www.etscompany.com/cleaning_products/product_info.php/products_id/55057/
IS YOUR DIRECT DRIVE PRESSURE WASHER PUMP STUCK?
The procedure: Loosen the four flange bolts equally so that two threads are
exposed. Start the motor and the centrifugal force of the spinning motor should
cause the pump to move outward toward the bolt heads. You may have to help
the pump by pulling on it while the motor is running. Once the pump has moved
to the bolt heads, stop the motor and loosen the bolts so that another two threads
are exposed.
Once the pump has moved, say 3/8”, remove the flange bolts completely and
start to pull the pump off the crankshaft. You may still have to pry the pump off,
but it will be much easier. And the best part is, no broken parts to clean up!

ETS Co. Inc. http://www.etscompany.com/

Pdf can be found here: http://www.etscompany.com/Direct_Drive_Pump_Removal.pdf

Posted on

AR – Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

AR – Annovi Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

Max Max Power Bore Stroke Weight
Model GPM PSI EBHP Dia mm mm Lbs.
XT8.14 2.11 2000 3 15 11 11
XT9.14 2.37 2000 3.3 18 8.4 11
XT11.14 2.9 2000 4 18 11 11

XT 1450 Pump Break Down Click Here.

XT8.14 Annovi Reverberi pump

Features

  • GPM 2.11
  • PSI 2000
  • EBHP 3
  • Shaft Diameter 24mm
  • Oil Capacity 10 OZ
  • INLET 1/2″ F
  • OUTLET 3/8″ F

XT9.14 Annovi Reverberi pump

Features

  • 2.37 G.P.M.
  • 2000 PSI
  • 3.3 Power EBHP
  • 18MM Bore Diam.
  • 8.4MM Stroke
  • 1450 RPM
  • 24MM Solid Shaft
  • High strength forged brass manifold
  • 6 – 6MM bolts
  • Ceramic plungers w/ thicker wall to help prevent thermal shock
  • Stainless Steel Valves

XT11.14 Annovi Reverberii pump

Features

  • 2.9 G.P.M.
  • 2000 PSI
  • 4.0 Power EBHP
  • 18MM Bore Diam.
  • 11MM Stroke
  • 1450 RPM
  • 24MM Solid Shaft
  • High strength forged brass manifold
  • 6 – 6MM bolts
  • Ceramic plungers w/ thicker wall to help prevent thermal shock
  • Stainless Steel Valves

CLICK HERE to purchase any of the AR – Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft