Tag: annovi reverberi pumps

XTV3G22E-F8 pump from Annovi Reverberi

Order the XTV3G22E-F8 pump from AR Pumps.

The XTV3G22E-F8 pump is rated for pressure washers that require 3 GPM at a 2200 maximum PSI.  This XTV3G22E-F8 can also be identified like the following: XTV3G22E, XTV3G22, XTV3G, XTV3, or even simply an XTV pump.  This great pump can also be used in place of the Hypro Pump 2269B-A, if you’re looking to fix a machine that currently has that unit on it.  The pump spins at a maximum RPM of 3400, however it’s worth pointing out that if you run at a higher or lower RPM this will effect your maximum oil capacity of the crankcase.  Should you run the pump under 1750 RPM you only will have an oil capacity of 8 oz. Conversely if you run the unit over 1750 RPM you will see the full 10 oz. capacity of the units crankcase.  However you run it, be at ease as this pump is built with longevity in mind.  Everything from the head, body and crankcase down to the connection rods, pins, valves and even seals are made from the best materials, tested and retested to be sure they will hold up to almost any pressure situation you can put the pump in.

 

Features you may also like to know about this XTV3G22E-F8 Pump:

 

• This unit is a triplex plunger style of pump.
• The pump is a direct drive unit with a NEMA 56C electric flange
• Has a hollow shaft diameter of  5/8” for mounting.
• 4.5 BHP is the maximum horse power rating.
• A 160 degrees F. temperature is the maximum fluid temp. that can be run through the pump.
• Two inlet ports measuring 1/2″ BSP.
• Has two outlet ports that also measure 3/8″ BSP.
• Standard right handed drive side.
• Has forged brass head and valve covers as well as solid ceramic plungers.
• Weighs in at only  9.0-11.0 lbs.

Need to repair your XTV3G22 pump?  Click here for the parts breakdown to see all kits and parts that will get your XTV3G22E-F8 pump up and running in no time.

You can order the pump online below, or if you are unsure if this will work for your machine, you can give us a call and we will be happy to assist you in your decision making on this pump purchase.  1-877-824-7763 {Smart Phones Click to Call}

Order the XTV3G22E-F8 pump from AR Pumps.

 

RCA3.5G25N pump from Annovi Reverberi

Order the RCA3.5G25N Pump From Annovi Reverberi.

The RCA3.5G25N which can also be see with a designation of RCA3.5G25, RCA3.5G, RCA3.5, RCA pump, RCA35G25N, RCA35G25, RCA35G, or RCA35 is a 3.5 GPM at 2500 PSI Pump.  This unit has a maximum RPM of 1750 and is made to be a replacement pump on most of the pressure washers on the market today that require these specifications.  The RCA3.5G25N is built with longevity in mind, from its forged brass head and die cast body, down to its anodized cooling fans blades and solid ceramic plungers, everything that goes into constructing this pump is of the finest quality.

 

Need to repair an already owned RCA3.5G25N pump?  We have you covered for that too, just print off the parts breakdown located here, and give us a call for all the parts and kits you will need to get your pump back up and running.

Here are a few more specifications you may also need to know before purchasing a new RCA3.5G25N Pump:

• The maximum gallons per minute is 3.5, which i s also 13.2 liters per minute.
• 2500 is the maximum PSI which is a BAR of 170.
• The EBHP power rating on this unit is 6.0.
• A bore diameter of 18 mm with a stroke of 10 mm.
• Weighs in at only 10 pounds.
• 140° maximum pumping liquid temperature.
• The oil capacity of the crankcase is 9.81oz.
• One inlet thread measuring 1/2”F.
• A discharge thread that measures  3/8”F.

As always, if your not sure what pump is your ideal replacement unit for your pressure washer, give one of our knowledgeable pump specialists a call, and they will be happy to assist you with your choices.  1-877-824-7763 {Smart Phones Click to Call}

However, if you know this RCA3.5G25N pump is a perfect match for your machine order it online below for the fastest service.

Order the RCA3.5G25N Pump From Annovi Reverberi.

XMV3G25D-F25 pump from Annovi Reverberi

Order the XMV3G25D-F25 AR Pump Online.

This XMV3G25D-F25 pump is a very common replacement for pressure washers that need 3 gallons per minute at 2500 PSI.  The XMV3G25D-F25 spins at a pump standard of 3400 RPM, and is built to mount to almost any type of pressure washer configuration there is out there.  It will mount to either a gasoline or electric type motor, and it will work with coupling or belt drive systems as well as gearboxes.  This items can be classified with other identifications such as the XMV3G25D-F, XMV3G25D, XMV3G25, XMV3G, XMV3, or just an XMV pump.  However you see it, rest assured it will last you and your pressure washer a lifetime.  This unit is constructed of the finest brass, metal and aluminum parts inside and out to give you years of worry free pressure cleaning.  Even the internal o-rings and seals are made from the best rubber and plastic that Annovi Reverberi could acquire, to help in the longevity of these hard working parts of this pump.

Here are a few more bits of information you may need about the XMV3G25D-F25 Pump:

• The 3 gallons per minute on this unit is 11.4 liters per minute in metric.
• A 2500 PSI rating is equivalent to 170 BAR.
• The power rating on this item is an EBHP rating of 5.
• This XMV3G25D-F25 has a bore of 5 mm and a stroke of 7.6mm.
• The shipping weight on this unit is 15 pounds.
• A maximum liquid pumping temperature is 140°.
• Oil capacity of the crankcase is 14.6oz.
• One inlet thread measuring 1/2”F.
• A discharge thread that also measures 3/8”F.

 

Need parts and kits for your  XMV3G25D-F25 pump?  Click here for the parts breakdown or service manual for this pump.

 

Still having trouble determining if this is the best pump for your machine?  Please give us a call and we will be happy to assist you with any questions you have about this pump.

1-877-824-7763 {Smart Phones Click to Call}

Or order the item by clicking the link below.

Order the XMV3G25D-F25 AR Pump Online.

RMW2.5G26D-F7 pump from Annovi Reverberi

Order the RMW2.5G26D-F7 Pump from AR pumps.

This RMW2.5G26D-F7 pump is a very common replacement pump for your store bought pressure washer.  The RMW2.5G26D-F7 is rated 2.5 gallons per minute with a maximum 2600 PSI.  This unit is made to work on a host of big box hardware store machines that require an RPM of 3400 and a gas type flange.  This pump can also be seen identified with the following codes: RMW2.5G26D, RMW2.5G26, RMW2.5G, RMW2.5, RMW pump, RMW25G26D-F7, RMW25G26D, RMW25G26, RMW25G, RMW25.  But, no matter how your see it written of said, it’s still the very powerful and easily replaced pump for your store bought pressure washer.  This pump mounts with a 7/8″ hallow flange and comes with a 609A-SAE gasoline flange mounted to it.

 

 

The body on this pump is primarily aluminum that is specially formulated for strength and durability for your everyday cleaning needs.  The unit does come with brass elements affixed to areas, where the greatest amount of pressure build up exists, to protect the item and you from over pressurization and or blow outs.

A few more specifications you may need to know about the RMW2.5G26D-F7 pump before you purchase it:

• The maximum gallons per minute is 2.5 which is 9.5 LPM.
• A maximum pressure of 2600 PSI which in metric is 173 BAR.
• This pump has a EBHP power rating of  4.3.
• A bore of 12mm and a stroke of 9.7mm are industry standard.
• Crankshaft has an ID stamp of 1.
• The  RMW2.5G26D-F7 unit spins at 3400 RPM.
• A 7/8″ diameter hollow shaft for mounting.

While these pumps are inexpensive and we recommend just replacing with another  RMW2.5G26D-F7 if yours stops working, you can purchase parts and kits for the unit.  To find out what you need, you can click here for the parts breakdown.

 

If you are ready to order this replacement pump you can do so by clicking the link below.  If you need more advice or have concerns if this pump will work for your machine give us a call at 1-877-824-7763 {Smart Phones Click to Call}.

Order the RMW2.5G26D-F7 Pump from AR pumps.

XTV3G22N Pump from Annovi Reverberi

Order the XTV3G22N Pump from Annovi Reveberi.

The XTV3G22N pump is a very common replacement pump for the pressure washer industry made by Annovi Reverberi.  This XTV3G22N is rated 3 gallons per minute at 2200 PSI.  This particular XTV pump spins at 3400 RPM and will work on a lot of pressure washers as its flow and pressure maximums meet or exceed most of the most common machines on the market today.  Like all the units in the XTV series of pump from AR, this XTV3G22N is built with longevity in mind.  A brass forged head, solid rods and connecting pins made from specially formulated metals as well as over sized bearings and seals, make this unit a beast of a machine when it comes to standing up to the work loads you need it to do.

A few features you may need to know before deciding to purchase the XTV3G22N pump:

• A maximum of 3 Gallons Per Minute or 114 Liters per minute.
• 2200 maximum PSI which is 150 BAR.
• An EBHP power rating of  4.5.
• Maximum temperatures of 140 Degrees F. (can be increased to 180 degrees with special kits).
• One 1/2″ F inlet port.
• A 3/8″ F outlet port.
• A crankcase maximum oil capacity of 10 oz.
• The unit has a 15 mm bore diameter.
• A stroke measurement of 7.2 mm.
• Weighs only 11lbs.

A SPECIAL NOTE On the Oil Usage and chaning for the XTV3G22N Pump: Use AR64516 Oil (click link to view/purchase oil from our online store).  It’s recommended that you change the oil after the first 50 hours of use. After this initial change you only need to complete another oil change once every 500 hours or so.

Also if you need parts to fix your unit you can find them all on the official parts breakdown from AR Pumps by clicking here.

If you have questions about this unit you can call us directly at 1-877-824-7763 {Smart Phones Click to Call} or click the link below to order it online.

Order the XTV3G22N Pump from Annovi Reveberi.

 

RMV2.5G24D – (Alm) Pump from Annovi Reverberi

Order the RMV2.5G24D – (Alm) Pump from Annovi Reverberi.

The RMV2.5G24D is a direct drive, vertically mounted replacement pump for your store bought pressure washer.  It is meant to replace units with a 2.5 gallon per minute flow and a maximum PSI of 2400. This is one of those pumps that has been identified in many ways, just like a lot of Annovi Reverberi pumps.  You may see it written like: RMV2.5G24D-(Alm), RMV2.5G24D, RMV2.5G24, RMV2.5G, RMV, RMV25G24D, RMV25G24, RMV25G, or even RMV25.  Regardless of how it’s written, it is one of the best quality replacement pumps for your pressure washer on the market today.  With a head of solid brass, an aluminum body, solid ceramic plungers and the best rubber, plastic and steel construction internal elements, this unit will last you and your business a long time.

Repair parts and kits for this RMV2.5G24D – (Alm) Pump can be found on the pump breakdown page.  Please click here to go to the manual and figure out what you need to fix your pump.

Technical specifications you may also need on the RMV2.5G24D – (Alm) Pump from Annovi Reverberi:

 

• The maximum liters per minute is  9.5.
• A maximum BAR Pressure of 166.
• Has an EBHP power rating of 4.3.
• The bore diameter is 12mm.
• A stroke measurement of 9.7mm.
• Weighs in at 7.5 pounds.
• Has a maximum liquid temperature of  140°.
• The oil capacity of the crankcase is 2.2oz.
• Has one inlet thread measurement of 3/4”.
• Discharge Thread measures 22mm – garden hose type.

Not sure if your pressure washer that you purchases from the likes of The Home Depot, Sears, Lowes or Menards will be fixed with this power unit, don’t worry give us a call and we will figure it out for you. 1-877-824-7763 {Smart Phones Click to Call}

You can also order this item direct from our pressure washer parts supply store at the link below.

Order the RMV2.5G24D – (Alm) Pump from Annovi Reverberi.

RKA4G30N pump from Annovi Reverberi

Order the RKA4G30N Pump from AR Pumps Online here.

The RKA4G30N is a replacement pump for your pressure washer that needs 4 gallons per minute at 3000 PSI.  This RKA4G30N is for machines that require at least 1750 RPM speed.  The pump is one of the most versatile pumps that Annovi Reverberi makes, mounting to either gasoline or electric pressure washers that use gearbox, belt or even coupling drive systems to run their pumps.  This item is built to last you years, probably longer than the original pump that came with your machine.  It has a forged brass head and die cast metal body, as well as solid ceramic plungers, cooling fans of anodized aluminum and state of the art one piece designed connecting rods.  For those of you who need metric rating of this RKA4G30N pump, they would be 15.1 liters per minute at a maximum BAR of 205.

Some other features you may like to know about the RKA4G30N Pump from AR Pumps:

 

• The unit has a power EBHP rating of 7.5.
• The pumps bore diameter is 18mm.
• Stroke of the unit is 12mm.
• Weighs in at around 19 pounds.
• The maximum liquid temperature you can run through the unit is 140°.
• Crankcase oil capacity is 15oz.
• One Inlet Thread that measures 1/2”F.
• A Discharge Thread that also measures 3/8”F.

Need repair parts or kits for your already owned RKA4G30N pump?  You can click here to get the official parts breakdown of this pump for all the items you can order to repair it.

If you’re looking over your not working pressure washer and are not sure if this RKA4G30N is the correct style of pump for your unit, give us a call toll free and we will be happy to assist you in figuring out the right pump for your machine.  1-877-824-7763 {Smart Phones Click to Call}

You can also order this pump quick and easy on our online store by clicking the link below.

Order the RKA4G30N Pump from AR Pumps Online here.