A Spotlight on the AR2189 the water seal kit for the RSV series of Pressure Washer Pumps.
AR2189 Water Seal Kit by Annovi Reverberi
This is the water seal and packing kit for the RSV series of Annovi Reverberi pressure washer pumps. The AR2189 kit contains everything you need to repair the wet end of your pressure washer pump. There are enough high pressure and low pressure seals (also called packings) to repair or service up to 3 cylinders on your ar pump.
AR2189 water seal kit contains:
AR1342761 – Gasket, quantity 3
AR1981580 – RIng, quantity 3
AR770260 – O-Ring, quantity 3
AR1260440 – Gasket, quantity 3
AR640070 – O-Ring Quantity 3
This water seal kit can be used to repair many types of Annovi Reverberi Pressure Washer Pumps, including misting pumps, plunger pumps, and even some the the AR Blue Clean Pressure Washing pumps. The AR2189 kit can also be use to fix the pumps used on most of today’s pressure washers from Black and Decker, Husky, Briggs & Stratton, Craftsman and Troy Built to Dewalt, Ex-cell, Job Boss and even the AR Blue Clean line of pressure washers. So whether your pressure washer was purchased from a Home Depot, Lowes, Sears or Ace Hardware or Menards chances are it has an Annovi Reverberi Pump in it and can probably be fix by the AR2189 Water Seal Kit. Check your owners manuals for specific Pump specifications.
Features RKA4G30AN Pressure Washer Pump From Annovi Reverberi:
Manifold: High strength forged brass for long term use
Bolts: Eight 8mm grade 8.8
Plungers: A special thick ceramic for long life, strong durability, and more resilience
Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized tapered roller bearing for maximum life and load disbursement
Bearing Support: Precision die cast and machined to assure concentricity and alignment
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form cages to provide long life and positive seating
Seals and V-packing: Continuously lubricating for extended life
Plunger Rods: Stainless steel construction for strength, no plating to scrape off, back up and o-ring plunger sealing system
Connecting Rods: One piece special alloy aluminum for higher pressure, over sized for maximum strength, load disbursement, and long life
AR Annovi Reverberi Pressure Washer Pump RKA4G30AN 4 GPM @ 3000 PSI RKA4G30AN Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze over sized for strength and load disbursement. These RKA4G30AN pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
A Spotlight on the XMA4G20N Pressure Washer Pump from Annovi Reverberi.
XMA4G20N Pressure Washer Pump from Annovi Reverberi
The Technical Specifications of the XMA4G20N Pressure Washer Pump:
Max GPM………………4
Max PSI………………….2000
Power EBHP……………5.5
Bore Dia. mm…………………….18
Stroke mm……………….13.2
Weight Lbs………………………..14
Max Temp……………….140°
Oil Capacity………………………14.5oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
The Features on this XMA4G20N Pressure Washer Pump:
This XMA4G20N Pressure Washer Pump has Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
The Bolts on the XMA4G20N Pressure Washer Pump: Eight bolts, 6mm, grade 12.9.
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps of this XMA4G20N Pressure Washer Pump: Machined brass – greater strength.
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
The Plungers on the XMA4G20N Pressure Washer Pump: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
The XMA4G20N Pressure Washer Pump has a Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity of the XMA4G20N Pressure Washer Pump: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available on the XMA4G20N Pressure Washer Pump to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
XMA4G20N AR (Annovi Reverberi) Pump 4 GPM @ 2000 PSI. AR pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
Additional Info on the XMA4G20N Pressure Washer Pump:
Items NOT INCLUDED with your XMA4G20N pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD of the XMA4G20N will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE on this XMA4G20N will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
Spotlight on the SXMV3.5G40D-F24 Pressure Washer Pump from Annovi Reverberi.
This SXMV3.5G40D-F24 Pressure Washer Pump is an ETS BOLT-N-GO PUMP SPECIAL!
SXMV3.5G40D-F24 Pressure Washer Pump from Annovi Reverberi.
The Technical Specifications of the SXMV3.5G40D-F24 pressure washer pump:
Max GPM………………3.5
Max LMP…………………………13.2
Max PSI………………….4000
Max Bar………………………….220
Power EBHP……………7.7
Bore Dia. mm…………………….15
Stroke mm……………….8.2
Weight Lbs………………………..16
Max Temp……………….140°
Oil Capacity………………………14.6oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
Features of the SXMV3.5G40D-F24:
Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow on the SXMV3.5G40D-F24 Pressure Washer Pump.
Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps: Machined brass – greater strength.
Packing and Plungers of this SXMV3.5G40D-F24 Pressure Washer Pump:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
– Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing on the SXMV3.5G40D-F24 Pressure Washer Pump is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber on the SXMV3.5G40D-F24 Pressure Washer Pump. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall the SXMV3.5G40D-F24 Pressure Washer Pump efficiency is increased.
ETS BOLT-N-GO PUMP SPECIAL! THIS PUMP SHIPS WITH A MANUAL, BOLT-ON STYLE UNLOADER, THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! SXMV3.5G40D-F24 AR (Annovi Reverberi) Pump 3.5 GPM @ 4000 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
SXMV3.5G40D-F24 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass heads with a bayonet style sight glass in the rear and side covers. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material over sized for maximum strength and load disbursement. Spinning at 1750 RPM, this SXMV3.5G40D-F24 pump was designed to deliver 3.5 GPM at 4000 PSI.
Recommended Accessories for this SXMV3.5G40D-F24 pressure washer pump:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
Availability:: available for order Product Code:ARWP-RTR-SXMV3.5G40D-F24
Price subject to change on the SXMV3.5G40D-F24 pressure washer pump from Annovi Reverberi.
Features of the RMV2.5G30-EZ Annovi Reverberi Pressure Washer Pump:
Manifold: High strength forged brass for long term use.
Bolts: Three 6mm cadmium plated steel.
Plungers: Hardened stainless steel.
Valves: Stainless steel poppet, seat and cage, stainless steel spring.
Seals: Buna-N dual seals.
Bearings: Premium over sized ball and needle bearings.
Crankshaft: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
This RMV2.5G30-EZ plunger pump will pump up to 2.5 GPM at 3000 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 – 5.5 HP engines. The hollow shafted RMV2.5G30-EZ pump includes a built-in pressure control valve, and chemical injection system.
You save $100.79! Availability:: available for order Product Code:RMV2.5G30-EZ
Price subject to change on the RMV2.5G30-EZ pressure washer pump from Annovi Reverberi
Spotlight on the XMV3G30D-F24 Pressure Washer Pump.
XMV3G30D-F24 3GPM 3000PSI 1″ GAS FLANGE:
XMV3G30D-F24 Pressure Washer Pump.
Technical Specifications of the XMV3G30D-F24 Pressure Washer Pump:
Triplex Plunger Pump
Direct Drive with Gas Flange
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 3000 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Shaft Diameter: 1″ ID with gas flange
Weight: 19 lb.
This XMV3G30D-F24 Pressure Washer Pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in postion on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
Spotlight on the Annovi Reverberi / AR North America XMV3G27D-F25 pump.
Annovi Reverberi / AR North America XMV3G27D-F25 pump.
This XMV3G27D-F25 Version with F25 flange series pumps are designed to direct drive on gasoline
engines ranging from 5 – 7 HP. The XMV3G27D-F25 pump Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components on the XMV3G27D-F25 pump include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. The XMV3G27D-F25 pump has over sized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drives this XMV3G27D-F25 pump. One-piece connecting rods are special alloy aluminum, over sized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems.
Technical Specifications of this XMV3G27D-F25:
Triplex Plunger Pump
Direct Drive with Gas Flange 3-6.5 HP SAE
Max. Volume: 3.0 GPM
Max. Discharge Pressure: 2,700 PSI
Max. Pump Speed: 3400 RPM
Shaft Diameter: 3/4” Hollow
Max. Horsepower Requirements: 7.3 GHP
Max. Fluid Temp.: 160 degrees F.
Inlet Ports (2): 1/2″ BSP
Discharge Ports (2): 3/8″ BSP
Drive Side: Standard right
Forged brass head & valve covers
Solid ceramic plungers
Weight: 19.0 lb.
The XMV3G27D-F25 pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
Spotlight on the Bolt-N-Go special RKV4G37D-F24-C Pressure Washer Pump from Annovi Reverberi.
RKV4G37D-F24-C Pressure Washer Pump from Annovi Reverberi
Technical Specifications of the RKV4G37D-F24-C pressure washer from Annovi Reverberi:
Maximum volume: 4 GPM
Maximum discharge pressure: 3700 PSI
Horsepower: 9.75 GHP
Maximum pump speed: 3400 RPM
Hollow shaft I.D: 1″
Bore: 18mm
Stroke: 7.0 mm
Inlet port thread: 1/2″ FPT
Discharge port thread: 3/8″ FPT
Maximum fluid temperature: 140 F.
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Weight: 21 lbs.
Features of the RKV4G37D-F24-C pressure washer from Annovi Reverberi:
Manifold of this RKV4G37D-F24-C: High strength forged brass for long term use
Bolts: Eight 8mm grade 8.8
Plungers on the RKV4G37D-F24-C: A special thick ceramic for long life, strong durability, and more resilience
Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings on this RKV4G37D-F24-C: Over sized tapered roller bearing for maximum life and load disbursement
Bearing Support: Precision die cast and machined to assure concentricity and alignment
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form cages to provide long life and positive seating
The RKV4G37D-F24-C has Seals and V-packing: Continuously lubricating for extended life
Plunger Rods: Stainless steel construction for strength, no plating to scrape off, back up and oring plunger sealing system
Connecting Rodson the RKV4G37D-F24-C: One piece special alloy aluminum for higher pressure, oversized for maximum strength, load disbursement, and long life
RKV4G37D-F24-C Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze over sized for strength and load disbursement. These RKV4G37D-F24-C pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
WARRANTY of this RKV4G37D-F24-C:
Annovi Reverberi (A.R.) cam shaft plunger pumps are warranted to the original purchaser for a period of 5 years from the date shipped from factory or U.S. warehouse. Warranty covers manufacturing defects or workmanship that may develop under normal use and service in a manner up to the directions and usage recommended by the manufacturer.
Warranty does not apply to misuse or when the RKV4G37D-F24-C pump or accessory is altered or used in excess of recommended speeds, pressures, temperatures, or handling fluids not suitable for pump or accessory material construction. Warranty does not apply to normal wear, freight damage, freezing damage, or damaged caused by parts or accessories not supplied by AR North America, Inc.
Liability of manufacturer for warranty is limited to repair or replacement at the option of the manufacturer when such products are found to be of original defect or workmanship at the time it was shipped from the factory. This warranty is in lieu of all other warranties, expressed or implied, including any warranty or merchantability and of any and all other obligations or liabilities on the part of the manufacturers or equipment.
ETS BOLT-N-GO PUMP PACKAGE SPECIAL!
EACH PUMP PACKAGE COMES INDIVIDUALLY PACKAGED, BRAND NEW – FACTORY TESTED! THIS PACKAGE CONSISTS OF ONE RKV4G37 3400 RPM D VERSION 1” (WITH GAS ENGINE FLANGE) PUMP WITH BOLT-ON STYLE UNLOADER (EITHER MINI-MATIC, GYMATIC OR VR35), CHEMICAL INJECTOR, THERMAL RELIEF VALVE (AKA PUMP GUARD), GARDEN HOSE THREAD & FILTER AND 3/8 IN. PLUG OUTLET.
JUST REMOVE YOUR OLD 1 IN. GAS ENGINE FLANGE PUMP AND BOLT THIS ONE ON!
Spotlight on this new pressure washer pump from Annovi Reverberi the RTX30
Annovi Reverberi Pressure Washer Pump RTX30
The RTX30 pressure washer pump from Annovi Reverberi Features:
MAX GPM 7.9
MAX L/Min 30
MAX PSI 4350
MAX BAR 300
Power EBHP 23.6
BORE DIA MM 20
Stroke DIA MM 23
Crankshaft ID 3
The AR Annovi Reverberi Pressure Washer Pump RTX30 features a forged nickel plated brass strength manifold with no porosity for long life. The plungers of the AR Annovi Reverberi Pressure Washer Pump RTX30 as a special aluminum oxide blend, with solid ceramic for long life and strength durability. The bearings are Over sized for load disbursement. The Oil seals are constructed of Buna-N Rubber. The o-rings have stainless steel garder springs to assure tension on the sealing surface. The plunger rods on the AR Annovi Reverberi Pressure Washer Pump RTX30 are made of stainless steel and the connecting rods are a heavy two piece aluminum, over sized for maximum strength , load disbursement and life. The crankshafts on the AR Annovi Reverberi Pressure Washer Pump RTX30 are forged and heat treated to add strength, durability and long life of these pumps from Annovi Reverberi.
Here is a spotlight on the RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi
RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi
These RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi Feature:
Manifold:
– Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
– Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
– Bolts: Three bolts, 10mm, grade 8.8.
Valves:
– Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Machined brass for greater strength.
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
– Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
– Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
– Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
This AR RXV35G30D & RXV3G30D-EZ pump is designed for medium duty loads. They spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. This RXV35G30D & RXV3G30D-EZ pump has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
