Tag: CAT Pump

Posted on

CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump

CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump.

Triplex plunger design delivers smoother liquid flow.  Hi-Pressure Seals are completely lubricated and cooled by the liquid being pumped.  Inlet and discharge valve assemblies interchange for easier maintenance.  Lubricated Lo-Pressure Seal provides double protection against external leakage.  Oil bath crankcase assures optimum lubrication.  Close tolerance concentric of the ceramic plunger maximizes seal life.

The CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump Features:

  • Triplex design offers high efficiency and low pulsation.
  • Durable high pressure seals are lubricated and cooled by pumped liquid.
  • Pre-set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.
  • Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
  • Specially formulated seals offer unmatched performance and extended life.
  • Optional STHT, FPM and EPDM elastomers for compatibility with many liquids and temperatures up to 200°F.
  • Convenient press in style seal case and interchangeable inlet and discharge valves for easy servicing
  • Wet-end easily serviced without entering crankcase.
CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump
CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump

The CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump has the following specifications:

  • Inlet Pressure Range…………………Flooded to 70 PSI (Flooded to 4.9 BAR)
  • Bore…………………………………………………………………0.709” (18 mm)
  • Crankcase Capacity……………………………………….12 oz. (0.35 L)
  • Standard Liquid Temperature……………………..160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2)…………………………………………..1/2” NPTF (1/2” NPTF)
  • Discharge Ports (2)…………………………………3/8” NPTF (3/8” NPTF)
  • Pulley Mounting……………………………………Either Side (Either Side)
  • Shaft Diameter………………………………………………0.650” (16.5 mm)
  • Weight………………………………………………………14.84 lbs. (6.7 kg)
  • Dimensions…………………………………..9.1 x 8.78 x 5.47” (231 x 223 x 139 mm)
  • Flow……………………………………………………………..2.4 gpm (9 lpm)
  • Pressure Range………………………………100 to 2200 psi (7 to 155 bar)
  • RPM…………………………………………………………..1725 rpm (1725 rpm)
  • Stroke………………………………………………………………0.276” (7 mm)
CAT Pump 3CP1130 parts breakdown
CAT Pump 3CP1130 parts breakdown
3CP1130 Datasheet Parts Breakdown {click image to left} Service Manual Service Manual {Click image to left}

Our Price: $910.00
CALL 1-877-824-7763 FOR A BETTER PRICE!
Call 1-877-824-7763 {Smart Phones Click to Call}
Availability:: available for order
Product Code: 3CP1130
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE.  PRICE VALID 10/20/2011

Posted on

CAT Pump 1CX05ELS.MIST and 8182 Motor (1/2HP, 1PH) Pulse Hose

Direct-Drive Misting Motor-Pump-Units CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 ) and 8182 Motor (1/2HP, 1PH) Pulse Hose

OPERATION:
A pressure regulator is included with each 1CX plunger pump. The regulator is not pre-set at the factory. Set system pressure once the system is started. Start at the lowest pressure reading and adjust the hex adjusting cap in small increments until the desired system pressure is attained. Remember to service the regulator on the same schedule as the pump seals and valves. Refer to 1CX service manual for start-up, servicing of seals and valves, torque requirements and diagnosis/maintenance chart.

INLET:
It is recommended to install a flexible hose at the pump inlet. Assure flooded or up to 60 psi inlet pressure for optimium
performance. Install an inlet filter to remove standard water debris.

DISCHARGE:
All discharge plumbing for the 1CX pump connects to the
regulator outlet port.

PULSE HOSE MOUNTING:
Mount the pulse hose by installing a tee fitting into the regulator outlet port. Install the pulse hose into the top port. Coil hose and tie wrap as shown. Add nipple with a tee to mount pressure gauge. The other end of the pulse hose is plugged to capture the pulse.

Note: Without a pulse hose, the pump may draw as much as 2 additional AMPS above full load AMPS.

BY-PASS: The regulator by-pass is at the bottom. Connect a 1/4” flexible hose and route to inlet of pump, to tank, or to drain.

NOTICE: By-pass to the pump inlet is designed for cold water or ambient temperature operation.

DO NOT EXCEED 6 MINUTES IN BY-PASS operation. Excessive temperatures will cause premature wear or damage to the pump and VOID THE WARRANTY.

CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 )
CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 )
CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 ) exploded view
CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 ) exploded view

Click here for the 1CX05ELS.MIST ( 1CX05ELSPD501) CAT Pump Parts Breakdown.

The CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 ) Features:

  • Ultra-compact, direct-drive motor-pump-unit for portability and small spaces.
  • Four-postion head mounting for plumbing flexibility.
  • Industrial stacked valves provide easy servicing.
  • Concentric ceramic plunger and specially formulated seals provide extended seal life.
  • Oil bath lubrication assures optimum drive-end lubrication.
  • Pressure regulator offers precision pressure setting and over-pressure protection.
  • Pulse Hose minimizes pulsation and lowers amp draw.

This CAT Pump 1CX05ELS.MIST ( 1CX05ELSPD501 ) has the following specs:

  • Maximum RPM………………………………1725 rpm (1725 rpm)
  • Inlet Pressure Range…………..Flooded to 60 psi (Flooded to 4 bar)
  • Bore………………………………………………….0.630” (16 mm)
  • Crankcase Capacity………………………….2.03 oz. (0.06 l)
  • Maximum Liquid Temperature……..up to 140°F (up to 60°C)
  • Inlet Port………………………………………3/8” NPTF (3/8” NPTF)
  • Discharge Port……………………………..1/4” NPTF (1/4” NPTF)
  • By-Pass Port………………………………..1/4” NPTF (1/4” NPTF)
  • Shaft Diameter………………………………………1/2” (12.7 mm)
  • Weight (Pump Only)…………………………..3.4 lbs. (1.5 kg)
  • Dimensions (Pump Only)…….3.62 x 5.12 x 6.85” (92 x 130 x 174 mm)
  • PUMP MODEL 1CX05ELS.MIST
  • Flow………………………………………………….0.50 gpm (1.89 lpm)
  • Pressure Range…………………………100 to 1000 psi (7 to 70 bar)
  • Stroke (Single Plunger)…………………………….0.248” (6.3 mm)

List Price: $745.00
Call 1-877-824-7763 or email for a better price
Availability:: available for order
Product Code: 1CX05ELSPD501
PRICE SUBJECT TO CHANGE.  PRICE VALID 10/13/2010

Posted on

CAT Pressure Washer Pump 340W

CAT Pressure Washer Pump 340 5PFR Ceramic Plunger, 4.0/1800, 1725 RPM, S-End, W770/S-Valves.

Need parts for this pump? Click here for the datasheet.

CAT Pressure Washer Pump 340
CAT Pressure Washer Pump 340

CAT Pressure Washer Pump 340 Features:

  • Triplex design offers high efficiency and low pulsation.
  • Durable high pressure seals are lubricated and cooled by pumped liquid.
  • Pre-set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.
  • Optional STHT, FPM and EPDM elastomers for compatibility with many liquids and temperaturesup to 200°F
  • Alternate crankshaft strokes offers flexibility with belt, clutch or direct-drive installation.

CAT Pressure Washer Pump 340 has the following specifications:

  • Bore…………………………………………………………………0.787” (20 mm)
  • Crankcase Capacity……………………………………….18 oz. (0.55 l)
  • Standard Liquid Temperature……………………..160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2)…………………………………………..1/2” NPTF (1/2” NPTF)
  • Discharge Ports (2)…………………………………3/8” NPTF (3/8” NPTF)
  • Shaft Diameter…………………………………………….. 0.787” (20 mm)
  • Weight…………………………………………………………19.8 lbs. (9 kg)
  • Dimensions……………………………..11.73 x 10.0 x 5.24” (298 x 254 x 133 mm)
  • Flow …………………………………………………………….4.0 gpm (15 l/m)
  • Pressure Range………………………………100 to 1800 psi (7 to 125 bar)
  • RPM ………………………………………………………….1725 rpm (1725 rpm)
  • Inlet PressureRange…………………
  • Flooded to 60 psi (Flooded to 4 bar)
  • Stroke ……………………………………………………………..0.394” (10 mm)
CAT Pressure Washer Pump 340 Exploded Parts View
CAT Pressure Washer Pump 340 Exploded Parts View

The following items are included FREE with this product:
1 of CAT PUMP OIL – 21 OZ. – 06101 ($9.75 value!)
1 of 5000 PSI PRESSURE GAUGE KIT ($25.90 value!)

List Price: $1,202.04
Call 1-877-824-7763 or email for a better price
Availability:: available for order
Product Code: 340W
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE.  PRICE VALID 10/12/2011

Posted on

CAT Pump 8058 Direct Drive Gearbox

CAT Pump 8058 Direct Drive Gearbox Helical -1-1/8″ Shaft, Gearbox Pump: 51G118, 58G118 Used on Models 51 and 58 Pump.

The CAT Pump 8058 Direct Drive Gearbox Features:

  • Polished solid ceramic plungers last long and resist abrasion.
  • Triplex plunger design providing low pulsation and quiet operation.
  • Internally lubricated and cooled packings for extended life.
  • No pulley selection or adjustment for quick, easy gas engine mounting.
  • Totally sealed housing providing independent
  • gearbox lubrication for maximum service life. Hardened steel helical design gears for smooth, quiet operation.
  • Multiple engine shaft and flange options for flexibility.
CAT Pump 8058 Direct Drive Gearbox
CAT Pump 8058 Direct Drive Gearbox

The CAT Pump 8058 Direct Drive Gearbox has the following specifications:

  • Gear Ratio ………………………… 2.0384 to 1 (2.0384 to 1)
  • Mounting Face…………………… 6-1/2″ (165 mm)
  • Engine Shaft Diameter……………………………………….. 1″ (25.4 mm)……………………………………….. 1-1/8″ ( 28.5 mm)
  • Engine Shaft Length…………… 3-1/4″ (82.6 mm)
  • Gearbox Capacity………………. 10 oz. (0.30 L)
  • Weight 8051, 8058, 8061, 8065, 8068…. 4.2 lbs. (1.90 kg) 8071, 8078 ………………………… 7.5 lbs. (3.40 kg)
  • Dimensions……………………….. 6.42 x 4.53 x8.19″ (163x115x208 mm)
  • Flow…………………………………. 5.0 GPM (19 L/M)
  • Pressure Range ………………… 100 to 2500 PSI (7 to 175 BAR)
  • Inlet Pressure Range………….. Flooded to 60 PSI (Flooded to 4 BAR)
  • Maximum Pump RPM…………. 1570 RPM (1570 RPM)
  • Maximum Engine RPM……….. 3200 RPM (3200 RPM)
  • Bore…………………………………. 0.708″ (18 mm)
  • Horsepower-Electric …………… 8.6 HP (8.6 HP)
  • Stroke ………………………………. 0.669″ (17 mm)
  • Pump Crankcase Capacity….. 25 oz. (0.75 L)
  • Weight ……………………………… 30.7 lbs. (13.9 kg)
  • Dimensions with .B…………….. 13.58 x 10.75 x 8.19″ (345 x 273 x 208 mm)
  • See Models 53, 58, 55, 51 data sheet for pump information.
CAT Pump 8085 Direct Drive Gearbox - Exploded Parts View
CAT Pump 8085 Direct Drive Gearbox - Exploded Parts View

List Price: $685.00
Our Price: $685.00
Sale Price: $600.00 Direct Drive Gearbox
You save $85.00!
Direct Drive Gearbox
Availability:: available for order
Product Code: 8058

SERVICING THE CAT Pump 8058 Direct Drive Gearbox DIS-ASSEMBLY
1. Completely drain lube from the direct drive gearbox housing.
2. Remove the four HHC screws which fasten the direct drive gearbox to the engine and separate gearbox and pump from engine.
3. Remove the four HHC screws which fasten the direct drive gearbox to the bearing cover flange and separate gearbox housing from pump.
4. Place gearbox housing on work surface with seal facing up.
5. Remove pinion oil seal by inserting screwdriver between pinion gear and inner lip of seal and pry out. Seal will be damaged and must be replaced.
6. Remove large retaining ring in groove below the pinion oil seal using retaining ring pliers and set aside for re-use.
7. Remove the pinion gear and bearing. Turn direct drive gearbox housing over onto engine mount flange surface. Bearing is pressed into position so it is necessary to press pinion and bearing out from rear. Set gearbox housing aside.
8. Remove bearing from pinion gear. Using reverse pliers remove retaining ring from groove on pinion gear and press bearing from pinion. Set aside pinion, bearing and retaining ring.
9. Remove hex machined retaining screw, lockwasher and flat holding washer from center of helical drive gear on pump shaft.
10. Slip helical drive gear from crankshaft.
11. Remove key from keyway in pump crankshaft. At this point the direct drive gearbox has been disassembled. Now begin examination of the gearbox parts for wear and reassembly. While the gearbox is in this state of disassemble, it is advisable to examine your pump for any indication of drive-end wear. If any of the following conditions are present, removal of the bearing cover flange is necessary. Only trained technicians should service drive end.
– Leakage between bearing cover flange and pump crankcase.
-Evidence of water in pump crankcase.
-Evidence of water in gearbox crankcase.
NOTE: If removal of bearing cover flange is necessary, completely drain oil from crankcase of pump.REMOVING BEARING COVER FLANGE
1. Remove the HSH screws, lockwashers and washers from bearing cover flange.
2. Tap flange with soft mallet to separate from pump crankcase.
3. Examine pump bearing and replace if worn.
4. Examine oil seal in bearing cover flange and replace if worn.
5. Examine gasket on outside of bearing cover flange and replace if cut or cracked.
6. Examine o-ring on inside outer groove of bearing cover flange and replace if cut or worn. If further pump servicing is needed, refer to your pump service manual, and Tech Bulletin 035 on “Servicing Crankcase Section”.REPLACING BEARING COVER FLANGE
1. Line up the four holes and mount gasket on outside of bearing cover flange. Note: Models 56, 59, 60 and 70 have dual bearings and eight screws.
2. Press new seal into bearing cover flange after exercising caution not to cut seal on keyway edge.
3. Line up the inside mounting holes on bearing cover flange with the holes on the pump. Keep the two outer “flanged” mounting holes to the top rear and lower front.
4. Apply Loctite-242 to the threaded area of screws before replacing. Torque per chart.REASSEMBLY of the CAT Pump 8058 Direct Drive Gearbox
1. Insert key into pump crankshaft keyway until flush with end of shaft.
2. Examine helical drive gear teeth for wear and replace if necessary. Line up keyway on gear with pump shaft keyway and key and slide onto shaft.
3. Install flat holding washer, lockwasher and retaining screw onto shaft and torque per chart.
4. Examine gearbox oil gauge and oil drain plug for any evidence of leaking and replace o-ring and gasket if necessary.
5. Examine pinion bearing for wear and replace if necessary.
6. Examine pinion gear teeth for wear and replace if necessary.
7. Press bearing over pinion gear until seated on shoulder. (Models with dual bearings; press first bearing on until seated; then second bearing until seated up to first bearing.)
8. Install retaining ring on pinion gear and snap into groove.
9. Insert pinion and gear assembly into gearbox housing and press into position until seated on shoulder. Groove for large retaining ring must be visible.
10. Insert large retaining ring into pinion bearing housing and snap into groove.
11. Lubricate I.D. and O.D. of new pinion oil seal. Place oil seal at mouth of pinion bearing housing with garter spring facing down. Carefully press seal into position until seated on retaining ring. Keep seal square in position to avoid inner lip hanging up on pinion gear edge.
12. Rotate pinion gear so keyway is up. Mount assembled gearbox housing onto pump shaft with helical drive gear. NOTE: Carefully match gear teeth and line up mounting holes. Place engine mounting flange in forward position.
13. Install the screws to fasten gearbox to bearing cover flange. Torque per chart.MOUNTING the CAT Pump 8058 Direct Drive Gearbox ONTO ENGINE
1. Rotate crankshaft of engine until keyway is at top.
2. Insert key into keyway and generously apply Loctite 76764 antiseize lubricant to engine shaft.
3. Line up keyway of pinion gear and engine shaft and carefully slip gearbox onto engine shaft until flush with engine face. Install four hex machined screws. Torque per chart. NOTE: Due to varying engine shaft lengths it may be necessary to install a small spacer on each of the four (4) hex machined screws between gearbox flange and engine face.
4. Before starting operation, fill gearbox housing to oil gauge dot with 80-90 weight gear lube and fill crankcase of pump to oil gauge dot with CAT PUMPS Special Premium Grade Non-detergent Oil.FIELD CONVERSION FROM STANDARD PUMP
To convert from a standard pump to a direct drive gearbox pump, remove the existing bearing cover, gasket and four combination head screws. Replace with new direct drive gearbox bearing cover flange, gasket, four lockwashers and new hex socket flat head screws. The bearing for the 51, 56, 58, 59 and 60 pumps is a tapered roller bearing with outer race. Remove the standard bearing cover from the pump. Remove outer race from bearing cover by gently pounding on work surface to unseat. Then use a bearing puller tool to pull race from bearing cover. Next press outer race into gearbox bearing cover flange. Be certain race is completely seated in flange before mounting onto pump.


Posted on

CAT Pump 1057 – Pressure Washer Pump

Nickel Aluminum Bronze Model CAT Pump 1057

This CAT Pump 1057 Features:

  • Triplex plunger design provides smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Special ported inlet manifold permits an external flush liquid providing cooling for hi-temp liquids and lubrication for low lubricity liquids.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger offers perfect alignment and maximizes seal life.
  • Precision design 304 and 316 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
  • Brass, Stainless Steel, Duplex SS or Nickel Aluminum Bronze manifolds for strength and corrosion resistance.
  • Special concentric, high-density, polished, solid ceramic plungers
  • provide a true wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offers unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
  • Wet-end easily serviced without entering crankcase.
  • Valve assemblies are accessible without disturbing piping.
  • Interchangeable inlet and discharge valve assemblies.
  • Preset seals require no packing adjustment.

CAT Pump 1057 Pressure Washer Pump Parts Breakdown PDF click here.

To get the service manual for this CAT Pump 1057 pressure washer pump click here.

CAT Pump 1057 - Pressure Washer Pump
CAT Pump 1057 - Pressure Washer Pump

This CAT Pump 1057 has the following Specifications:

  • Bore…………………………………………………………….0.945” (24 mm)
  • Stroke………………………………………………………….1.180” (30 mm)
  • Crankcase Capacity……………………………………….42 oz. (1.26 l)
  • Inlet Ports (2)…………………………………………..3/4” NPTF (3/4” NPTF)
  • Flushing Ports (2) (1051C)…………………………1/8” NPTF (1/8” NPTF)
  • Discharge Ports (2)…………………………………..1/2” NPTF (1/2” NPTF)
  • Pulley Mounting……………………………………… Either Side (Either Side)
  • Shaft Diameter………………………………………………1.181” (30 mm)
  • Weight…………………………………………………………44 lbs. (20 kg)
  • Dimensions………………………………16.28 x 12.99 x 6.44” (414 x 330 x 164 mm)
  • Flow………………………………………………………….. 10 gpm (38 l/m)
  • Pressure Range………………………………. 100 to 2200 psi (7 to 155 bar)
  • RPM……………………………………………………….. 958 RPM (958 RPM)
  • Inlet Pressure Range…………………………….. –5 to 60 psi (–0.35 to 4 bar)
  • Maximum Liquid Temperature ………………………..160°F (70°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
CAT Pump 1057 Exploded Pump Breakdown
CAT Pump 1057 Exploded Pump Breakdown

Our Price: $4,862.00
Call 1-877-824-7763 for a better price
Availability:: available for order
Product Code: 1057
CAT Pressure Washer Pump

Posted on

CAT Pump 280 – 3 Frame Piston Pump – Pressure Washer Pump

CAT Pump 280  – 3 Frame Piston Pump Brass Model – Pressure Washer Pump, 3.0/1000, 1330 RPM, BBCP.

Need parts for the CAT Pump 280  – 3 Frame Piston Pump Brass Model – Pressure Washer Pump?
Click here for the datasheet.
Click here for servicing instructions.

CAT Pump 280 - 3 Frame Piston Pump - Pressure Washer Pump
CAT Pump 280 - 3 Frame Piston Pump - Pressure Washer Pump

This pressure washer pump – CAT Pump 280 – 3 frame piston pump has the following Features:

  • Triplex UNIFLOW design provides a smooth, low-pulsation flow with strong suction capabilities.
  • Hard chrome-plated 304S cylinders and sleeves provide long life with mild liquids within a range of 5-9 PH.
  • Optional 316 Stainless Steel manifolds for added strength and corrosion resistance.
  • Optional FPM and PTFE elastomers for liquid compatibility.

The CAT Pump 280 – 3 Frame Piston Pump – Pressure Washer Pump has the following specifications:

  • Inlet Pressure Range…………………–8.5 to 40 psi (–0.6 to + 2.8 bar)
  • Bore…………………………………………………..0.787” (20 mm)
  • Crankcase Capacity……………………………..10 oz. (.3 l)
  • Maximum Liquid Temperature……………….160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Port (1)…………………………………..1/2” NPTF (1/2” NPTF)
  • Chemical Injection Port (1)………………1/4” NPTF (1/4” NPTF)
  • Discharge Ports (2)…………………………3/8” NPTF (3/8” NPTF)
  • Discharge Port (1)…………………………..1/2” NPTF (1/2” NPTF)
  • Pulley Mounting……………………………..Either side (Either side)
  • Shaft Diameters…………………………………..0.650” (16.5 mm)
  • Dimensions (280)……………..10.63 x 8.79 x 5.30” (270 x 223 x 134.5 mm)
  • Dimensions (290)……………..10.83 x 8.79 x 5.30” (275 x 223x 134.5 mm)
  • Flow…………………………………………3.0 gpm (11.4 l/m)
  • Pressure Range………………100 to 1000 psi (7 to 70 bar)
  • RPM………………………………………1330 rpm (1330 rpm)
  • Stroke………………………………………..0.394” (10 mm)
  • Weight…………………………………….11.7 lbs. (5.3 kg)

List Price: $925.58
Our Price: $712.23 
You save $213.35!
Availability:: available for order
Product Code: BAPL-4467
PSI: 1000
GPM: 3
CAT Pressure Washer Pump

Posted on

CAT Pressure Washer Pump 530

CAT Pressure Washer Pump 530 7PFR Ceramic Plunger, 5.0/2500, 1100 RPM, D-End, BBCP/S-Valves.

Need parts for this CAT Pressure Washer Pump 530?

Click here for the datasheet for CAT Pressure Washer Pump 530.

Click here for servicing instructions for this CAT Pressure Washer Pump 530.

CAT Pressure Washer Pump 530
CAT Pressure Washer Pump 530

The CAT Pressure Washer Pump 530 Features:

  • Triplex plunger provides smoother liquid flow.
  • Hi-Pressure Seals or V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Inlet and discharge valve assemblies interchange for easier maintenance.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger maximizes seal life.
  • Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
  • Forged brass manifold is strong and corrosion resistant.
  • Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, Hi-Pressure Seals or
  • V-Packings offer unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater capacity mean longer bearing life.
  • Wet end is easily serviced without entering crankcase, requiring less time and effort.
  • Valve assemblies are accessible without disturbing piping, for quick service.
  • Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs.

This CAT Pressure Washer Pump 530 has the following technical specifications:

  • Flow…………………………………………………..5.0 GPM (19 L/M)
  • Pressure Range………………………..100 to 2500 PSI (7 to 175 BAR)
  • RPM ……………………………………………….1100 RPM (1100 RPM)
  • Bore……………………………………………………..0.708″ (18 mm)
  • Stroke…………………………………………………..0.945″ (24 mm)
  • Inlet Pressure Range………………Flooded to 60 PSI (Flooded to 4 BAR)
  • Crankcase Capacity ………………………………..25 oz. (0.75 L)
  • Maximum Liquid Temperature …………………..160°F (71°C)
  • For temperatures above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2) ……………………………………1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2)……………………………3/8″ NPTF (3/8″ NPTF)
  • Shaft Diameter ……………………………………….0.945″ (24 mm)
  • Weight………………………………………………..25.5 lbs. (11.5 kg)
  • Dimensions…………………………..13.6 x 9.61 x 6.41″ (346 x 244 x 163 mm)

List Price: $1,853.02
Our Price: $1,425.90 
You save $427.12!
Availability:: Usually Ships in 24 Hours
Product Code: BAPL-2616

Posted on

CAT Pressure Washer Pump 56

This is a CAT Pressure Washer Pump 56 triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.

7PFR Ceramic Plunger, 5.5/3500, 1210 RPM or 6.0/3000, 1320 RPM, S-End, FBB/S-Valves.

Need parts for this pump?
Click here for the datasheet.
Click here for servicing instructions.

CAT Pressure Washer Pump 56
CAT Pressure Washer Pump 56

The CAT Pressure Washer Pump 56 Features:

  • Superior Design!
  • Triplex plunger design gives smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Inlet and discharge valve assemblies interchange for easier maintenance.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger maximizes seal life.
  • Convenient Gearbox Pump version for direct mounting to gas engine.
  • Quality Materials!
  • All stainless steel valves are heat treated and seats are roller burnished for a positive seal and extended valve life.
  • Forged brass manifold is strong and corrosion resistant.
  • Special concentric, high density, polished, graphite impregnated, solid ceramic plungers are abrasion resistant and result in extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offers unmatched performance and seal life.
  • Optional FPM [Viton®] elastomers for liquid compatibility.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
  • Easy Maintenance!
  • Wet-end is easily serviced without entering crankcase, requiring less time and effort.
  • Valve assemblies are accessible without disturbing piping, for quick service.
  • Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs.

The CAT Pressure Washer Pump 56 has the following technical specifications:

  • COMMON SPECIFICATIONS
  • Bore: 0.708″ (18 mm)
  • Inlet Pressure Range: Flooded to 60 PSI (Flooded to 4 BAR)
  • Crankcase Capacity: 25 oz. (0.75 L)
  • Maximum Liquid Temperature: 160°F (71°C)
  • (Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.)
  • Inlet Ports (2): 1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2): 3/8″ NPTF (3/8″ NPTF)
  • Shaft Diameter: 0.945″ (24 mm)
  • Weight: 29.25 lbs. (13.3 kg)
  • Weight w/Gearbox: 36.8 lbs. (16.7 kg)
  • Dimensions: 13.93 x 8.2 x 6.41″ (354 x 208 x 163 mm)
  • *See Data Sheet 8051-8078 for maximum engine RPM.
  • MODELS 56 Alternate or 56G1*
  • Flow …………………………. 5.5 gpm (21 l/m) 8 gpm (30 l/m)
  • Pressure Range……….. 100 to 3500 psi (7 to 245 bar) 100 to 1800 psi (7 to 125 bar)
  • Pump RPM………………. 1210 rpm (1210 rpm) 1760 rpm (1760 rpm)
  • Engine RPM…………….. — — 3600 rpm (3600 rpm)
  • Stroke……………………….. 0.945” (24 mm) 0.945” (24 mm)
List Price: $2,259.54
Our Price: $1,738.72 
You save $520.82!
Availability:: Usually Ships in 24 Hours
Product Code: BAPL-1935
CAT Pressure Washer Pump
Posted on

CAT Pressure Washer Pump 1050

CAT Pressure Washer Pump 1050
CAT 1050 15PFR PUMP 10GPM 2200PSI 958RPM

CAT Pressure Washer Pump 1050 Parts Breakdown PDF –> Datasheet
CAT Pressure Washer Pump 1050 Service Manual–> Service Manual

CAT Pressure Washer Pump 1050

The CAT Pressure Washer Pump 1050 Features:

  • Triplex plunger design provides smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Special ported inlet manifold permits an external flush liquid providing cooling for hi-temp liquids and lubrication for low lubricity liquids.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger offers perfect alignment and maximizes seal life.
  • Precision design 304 and 316 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
  • Brass, Stainless Steel, Duplex SS or Nickel Aluminum Bronze manifolds for strength and corrosion resistance.
  • Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offers unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
  • Wet-end easily serviced without entering crankcase.
  • Valve assemblies are accessible without disturbing piping.
  • Interchangeable inlet and discharge valve assemblies.
  • Preset seals require no packing adjustment.

The CAT Pressure Washer Pump 1050 has the following technical specifications:

  • Flow………………………………………………………….. 10 gpm (38 l/m)
  • Pressure Range………………………………. 100 to 2200 psi (7 to 155 bar)
  • RPM……………………………………………………….. 958 RPM (958 RPM)
  • Inlet Pressure Range…………………………….. –5 to 60 psi (–0.35 to 4 bar)
  • Maximum Liquid Temperature ………………………..160°F (70°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Alternate Specifications – Model 1050 Only
  • Flow*…………………………………………………………. 12 gpm (45 l/m)
  • Pressure Range*………………………………100 to 1800 psi (7 to 125 bar)
  • RPM*……………………………………………………. 1150 RPM (1150 RPM)
  • Inlet Pressure Range* ……………………………20 to 60 psi (1.4 to 4 bar)
  • Maximum Liquid Temperature*………………………..100°F (38°C)
  • *C.A.T. Required
  • Bore…………………………………………………………….0.945” (24 mm)
  • Stroke………………………………………………………….1.180” (30 mm)
  • Crankcase Capacity……………………………………….42 oz. (1.26 l)
  • Inlet Ports (2)…………………………………………..3/4” NPTF (3/4” NPTF)
  • Flushing Ports (2) (1051C)…………………………1/8” NPTF (1/8” NPTF)
  • Discharge Ports (2)…………………………………..1/2” NPTF (1/2” NPTF)
  • Pulley Mounting……………………………………… Either Side (Either Side)
  • Shaft Diameter………………………………………………1.181” (30 mm)
  • Weight…………………………………………………………44 lbs. (20 kg)
  • Dimensions………………………………16.28 x 12.99 x 6.44” (414 x 330 x 164 mm)

List Price: $3,297.68
Our Price: $2,537.56 
You save $760.12!
Product Code: BAPL-5715  ( CAT Pressure Washer Pump 1050 )
PRICE SUBJECT TO CHANGE.  PRICE VALID 10/25/2011

Posted on

CAT Pressure Washer Plunger Pump 51G1

The CAT Plunger Pump 51G1  with Helical Gearbox, 1″ Shaft, 4.8/3000, 1765/3600 RPM Inclds: 51, 8051 FEATURES

The CAT Pressure Washer  Plunger Pump 51G1 has Superior Design with:

•Triplex plunger provides smoother liquid flow.
•Hi-Pressure Seals or V-Packings are completely lubricated and cooled by the liquid being pumped.
•Lubricated Lo-Pressure Seals provide double protection against external leakage.
•Oil bath crankcase assures optimum lubrication.
•Close tolerance concentricity of the ceramic plunger maximizes seal life.
•Optional Gearbox version for direct mounting to gas engine.

The CAT Pressure Washer  Plunger Pump 51G1 is built with Quality Materials:
•Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended seal life.
•Forged brass manifold for strength and corrosion resistance.
•Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
•Specially formulated, CAT PUMP exclusive, Hi-Pressure Seals or V-Packings offer unmatched performance and seal life.
•Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Oversized crankshaft bearings with greater loading capacity mean longer bearing life.

The The CAT Pressure Washer  Plunger Pump 51G1 has Easy Maintenance:

•Wet-end is easily serviced without entering crankcase, requiring less time and effort.
•Inlet and discharge valve assemblies interchange for easier maintenance without disturbing piping.
•Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs.

51G1 CAT Pressure Washer Plunger Pump

The CAT Pressure Washer Plunger Pump 51G1 has the following specifications:

  • Crankcase Capacity……………………………………………………………..25 oz. (0.75 L)
  • Maximum Liquid Temperature ……………………………………………….160°F (71°C)
  • For temperatures above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2)…………………………………………………………………1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2) ………………………………………………………..3/8″ NPTF (3/8″ NPTF)
  • Shaft Diameter…………………………………………………………………….0.945″ (24 mm)
  • Weight …………………………………………………………………………….26.5 lbs. (12.0 kg)
  • Dimensions (Pump Only) …………………………………….13.6 x 8.20 x 5.90″ (345 x 208.30 x 150 mm)

List Price: $2,543.00
Our Price: $2,543.00
Call 1-877-824-7763 or email for a better price
Availability:: Usually Ships in 24 Hours
Product Code: 51G1