Tag: CAT Pump

Posted on

66DX40G1I CAT Pump

The 66DX40G1I CAT Pump replaces the older CAT model 66DX40GG1. Get this 4 GPM @ 4000 PSI ready to attach pump for your pressure washer. Comes standard with chemical injector & unloader CLICK HERE TO BUY. #catpumps #pressurewasherpump For gasoline powered pressure washers.

66DX40G1I CAT Pump
66DX40G1I CAT Pump
Posted on

Cat Pumps 33060 Valve Kit for – 5CP3120 Pump

The Cat Pumps 33060 Valve Kit for – 5CP3120 Pump from Cat is the kit you will need to repair this unit on your pressure washer.  It’s a common kit and easy to replace yourself to get your pump back up and running fast.  Perfect for the DIY-er.

You will need 2 of this Cat Pumps 33060 Valve Kit for – 5CP3120 Pump in order to completely repair this part of your pump.  The kit has all the pieces including the o-rings to  do the repair.

Cat Pumps 33060 Valve Kit for - 5CP3120 Pump
Cat Pumps 33060 Valve Kit for – 5CP3120 Pump

As seen in the photo above the Cat Pumps 33060 Valve Kit for – 5CP3120 Pump has the following:

  • 6 – o-rings
  • 3 – cat pumps valves.

Again if you are doing this repair yourself, which you can easily do you will need to order two of these kits to replace all the valves on your 5CP3120 pump.

This kit is also used on the 5CP5210 pump from CAT as well.  Not sure what pump you have or if this is the right kit for your needs.  Find all the repair / breakdown manuals here for CAT, to see if this is the valve kit for you. Once you know it’s the right kit, order it here fast and easy.   Don’t forget to order 2 of them!

Not sure if your looking at the right repair kit, give us a call with your CAT Pump Model number toll free and we will figure out the best fix for your unit. Call 1-877-824-7763 {Smart Phones Click to Call}

The best news about this kit is, that it does qualify for our Everyday 5% off sale.  So go here and order 2 of them and then at check out put the code “5off” in the coupon field and you will get an additional 5% off your subtotal.

Posted on

Cat Pumps 34053 Seal kit for 2SF pumps

The Cat Pumps 34053 Seal kit for 2SF pumps is the most common seal kit for 2SFX and 2SF Pumps that are made by CAT.   When there is leaking in your pump the seals are the first thing you should look into.  They are the easiest thing to wear but luckily the easiest thing to replace as well.

This picture below is of the Cat Pumps 34053 Seal kit for 2SF pumps. You will see it has most of what you need to repair your pressure washer pump and the cost is way more acceptable than purchasing a whole new pump.

Cat Pumps 34053 Seal kit for 2SF pumps
Cat Pumps 34053 Seal kit for 2SF pumps

The kit contains the following items:

O-rings and rubberized seals to fix one pumps wet end.

You will only need one kit per any 2SF or 2SFX CAT Pump you may have.

Not sure if this is the right repair kit for your pump, check out our repair / breakdown manuals here to see if it’s listed as a repair kit. Don’t see the kit listed or just not sure about what is wrong with your pump, give us a call toll free and we will help you determine the correct fix for your CAT pump for your pressure washer.  Most times it’s much more economical to repair these pumps then replace them as CAT Pumps can be very expensive.   Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the Cat Pumps 34053 Seal kit for 2SF pumps?  Click here to quickly and safely order this kit today from our e-Commerce store.

This kit does qualify for our 5% off $50.00 everyday sale.  Just add the coupon code “5off” in the field at checkout and get an additional 5% off your subtotal.

Posted on

CAT Pump 7535 Pressure Unloader

The CAT Pump 7535 Pressure Unloader is designed for CAT Pumps that have a maximum flow rate of 21 gpm at a PSI of 4000.  The minimum PSI is 800.  Then unloader is for a single or multiple pump set up with either a weep or multiple nozzle machine. This unit relays on a 5 to 10% bypass for creation of the optimal unloader performance.

This CAT Pump 7535 Pressure Unloader will maintain the pressure and go into a bypass mode when the trigger of your pressure washers spray gun is released, or if there is some type of external blockage in the downstream of the hose. 

CAT Pump 7535 Pressure Unloader
CAT Pump 7535 Pressure Unloader

The features of this CAT Pump 7535 Pressure Unloader are:

  • Maximum  Flow rate is 21 gpm
  • Minimum Pressure on the unloader is  800 psi
  • Maximum  Pressure output of the unit  is 4000 psi
  • Inlet Port Size measures  0.5
  • Discharge Port Size has a measurement of 0.5
  • Type of Accessory is a CAT Unloader
  • Material of the bodies construction is  Brass (BB)

Not sure if the CAT pump you have will work with this unloader? Or need to repair this unloader?  Find the repair manual / breakdown of your pump or of this unit to see if it will work for you or for parts for getting the unloader back up and running with out having to replace the whole unit.

Still not sure if the CAT Pump 7535 Pressure Unloader is correct? Just give us a call toll free and a CAT Pumps specialist will help you out.  Call 1-877-824-7763 {Smart Phones Click to Call}

Order this unloader here on our secure eCommerce site.

This unloader from CAT Pumps does qualify for our everyday sale of 5% off of $50.00.  Just use the code “5off” in the coupon field at check out to get an additional 5% off your subtotal.