Tag: Mi-T-M Generator / Air Compressor / Welder

• Displacement/Engine 688cc Honda OHVwith electric start (cables are included, battery not included)
• Rated Speed 3600 RPM
• CFM @ 175 PSI 29.0
• Tank 20-gallon receiver tank
• Max. AC Output 5000 watts
• Rated AC Output 4500 watts
• Alternator Wattage 4500 watts
• Frequency/Voltage 60Hz/120V/240V
• Max. Amps (120V/240V) 41.5/20.8
• Cont. Amps (120V/240V) 37.5/18.8
• Receptacles (2) 120V, 20A GFCI duplex – 120V/240V, 20A twist lock
• Duty Cycle (10 min. run time) 220A @ 40%, 190A @ 60%, 150A @ 100%
• DC Voltage 50-220A working range
• Weights & Dimensions
• Net Weight 803 lbs.
• Shipping Weight 870 lbs.
• Length 47 in.
• Width 24 in.
• Height 50 in.

View Product Sheet for the AGW-SH22-20M: CLICK HERE

This  AGW-SH22-20M Offers the convenience of three machines in one, this new model combines a 220-amp arc welder, two-stage air compressor and a 5000-watt generator with a 688cc Honda OHV engine. You’ll save space and money and reduce your load capacity with the new  AGW-SH22-20M combination unit. With only one engine powering these components, you’ll also save time on serving parts and maintenance.

The AGW-SH22-20M in Operation Generator Mode:
AC current only · Selector switch set to idle down –engine will idle down when generator is not in use and tank pressure is 175 PSI · Switch is set to full throttle –engine will run full throttle continuously

The AGW-SH22-20M Welder Mode:
DC current only · Selector switch must be set to full throttle

Compressor Pump on this AGW-SH22-20M:
Splash lubricated cast iron crankcase to extend the hours of performance · Cast iron head for heat dissipation · Durable stainless-steel braided discharge hose · Quality pilot valve unloader

The Generator of this AGW-SH22-20M:
Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder
220 DCA arc welder · Amperage selection switch

Frame
Powder coated ASME coded 20-gallon receiver tank · 1/4-inch base plate to reduce vibration · 14-gauge powder coated four-piece belt guard

Components
Belt tightening system pulls engine straight to ensure constant belt alignment · Manual drain valves for proper maintenance · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · 10-gallon fuel tank capacity

*Equipped with 150-PSI maximum rated regulator.

List Price: $13,520.00
Our Price: $9,213.34 Click to order the AGW-SH22-20M
You save $4,306.66!
Availability:: available for order
Product Code: AGW-SH22-20M
Price subject to change on the AGW-SH22-20M