Mi-T-M HSE-1502-0M10 Hot Water 110V Pressure Washer 1500 PSI. Looking for quiet operation? This electric hot water washer is ideal for industrial applications.
GUARANTEED SHIPPED IN 3 DAYS!
HSE-1502-0M10 Mi-T-M Hot Pressure Washer
This Mi-T-M HSE-1502-0M10 Hot Pressure Washer Features:
2 GPM @ 1500 PSI
2 HP / 120V
Totally enclosed fan-cooled electric motor with manual thermal overload protection
Direct drive triplex piston pump with ceramic plungers and forged brass manifold
Thermal relief valve
Stainless steel and brass unloader valve
High pressure detergent injection
Complete system diagnostic board
Solid state electronic ignition
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner.
Float tank
Polyethylene burner fuel tank
Temperature rise 150°F/66°C maximum above ambient, maximum 200 degrees F
Water output temperature is approximately 190° to 200°
Easy coil drain
Powder coated steel gun/wand holder
Solid steel threaded axles
Pneumatic tires with tubes (4)
Locking tire brake
3/8 inch x 50 ft steel wire braided pressure hose with screw connects, swivel and bend restrictors
Professional grade insulated dual lance with 15 degree fixed and detergent nozzles
Mi-T-M Hot Pressure Washer HSE1002-0M11 110V Pressure Washer 1000 PSI. Looking for quiet operation? This electric hot water washer is ideal for industrial applications.
The Mi-T-M Hot Pressure Washer HSE1002-0M11 Features:
2 GPM @ 1000 PSI
1.5 HP / 120V
Totally enclosed fan-cooled electric motor with manual thermal overload protection
Direct drive triplex piston pump with ceramic plungers and forged brass manifold
Thermal relief valve
Stainless steel and brass unloader valve
Low pressure detergent injection
Complete system diagnostic board
Solid state electronic ignition
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner.
Polyethylene burner fuel tank
Temperature rise 150°F/66°C maximum above ambient, maximum 200 degrees F
Water output temperature is approximately 190° to 200°
Easy coil drain
Powder coated steel gun/wand holder
Solid steel threaded axles
Pneumatic tires with tubes (4)
Locking tire brake
3/8 inch x 50 ft steel wire braided pressure hose with screw connects, swivel and bend restrictors
Professional grade insulated dual lance with 15 degree fixed and detergent nozzles
One (1) year limited parts and labor warranty.
Three (3) year limited warranty on coil.
Five (5) year limited warranty on pump.
HSE1002-0M11 Mi-T-M Hot Pressure Washer
The Mi-T-M Hot Pressure Washer HSE1002-oM11 has the following specifications:
Hot Water 110V Pressure Washer 1000 PSI. Steam Combination Unit. This compact, portable, hot water pressure washer offers quiet operation and is suitable for a wide variety of industrial applications.
Pump: Direct drive triplex piston AR pump with ceramic plungers · Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · High pressure detergent injection
Motor: Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord with in-line GFCI which meets required CSA certification · Solid state electronic ignition
Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Electric cord hanger · Powder coated steel gun/wand holder • Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake
Components: Complete system diagnostic board · Float tank · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather · Energy efficient top-fired heat exchanger designed for convenient trouble-shooting and easy maintenance · High-quality fuel filter/water separator ensures clean fuel supply · Combination wet steam cleaner/pressure washer
Unit Includes: 50-foot x 3/8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F · Water output temperature for “wet” steam is approximately 250°F · Operates at 650-PSI in “wet” steam mode
HSE-1002-SM10 Mi-T-M Hot Pressure Washer / Steam Combo Unit
The HSE-1002-SM10 Mi-T-M Hot Pressure Washer / Steam Combo Unit Features:
2 GPM @ 1000 PSI
1.5 HP / 120V
Totally enclosed fan-cooled electric motor with manual thermal overload protection
Direct drive triplex piston pump with ceramic plungers and forged brass manifold
Thermal relief valve
Stainless-steel and brass unloader valve
High pressure detergent injection
Complete system diagnostic board
Solid state electronic ignition
Float tank
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner
Polyethylene burner fuel tank
Temperature rise 150°F/66°C above ambient, maximum outlet temperature 200 degrees F
Water output temperature for “wet” steam is approximately 250°
