Spotlight on this new pressure washer pump from Annovi Reverberi the RTX30
Annovi Reverberi Pressure Washer Pump RTX30
The RTX30 pressure washer pump from Annovi Reverberi Features:
MAX GPM 7.9
MAX L/Min 30
MAX PSI 4350
MAX BAR 300
Power EBHP 23.6
BORE DIA MM 20
Stroke DIA MM 23
Crankshaft ID 3
The AR Annovi Reverberi Pressure Washer Pump RTX30 features a forged nickel plated brass strength manifold with no porosity for long life. The plungers of the AR Annovi Reverberi Pressure Washer Pump RTX30 as a special aluminum oxide blend, with solid ceramic for long life and strength durability. The bearings are Over sized for load disbursement. The Oil seals are constructed of Buna-N Rubber. The o-rings have stainless steel garder springs to assure tension on the sealing surface. The plunger rods on the AR Annovi Reverberi Pressure Washer Pump RTX30 are made of stainless steel and the connecting rods are a heavy two piece aluminum, over sized for maximum strength , load disbursement and life. The crankshafts on the AR Annovi Reverberi Pressure Washer Pump RTX30 are forged and heat treated to add strength, durability and long life of these pumps from Annovi Reverberi.
Here is a spotlight on the RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi
RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi
These RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi Feature:
Manifold:
– Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
– Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
– Bolts: Three bolts, 10mm, grade 8.8.
Valves:
– Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Machined brass for greater strength.
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
– Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
– Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
– Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
This AR RXV35G30D & RXV3G30D-EZ pump is designed for medium duty loads. They spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. This RXV35G30D & RXV3G30D-EZ pump has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
Technical Specifications for the CAT Pump 5CP4120CSS – 5CP Plunger Pump:
4.5 gpm / 17 lpm
4000 psi/276 bar
1750 RPM
Belt Drive – standard pulley or clutch
Direct Drive – Bell Housing
Gearbox
CAT Pump 5CP4120CSS – 5CP Plunger Pump – Parts Breakdown
Cat Pumps releases the 5CP4120CSS plunger pump for your pressure washers and Hydro Excavating needs. This 4.5 GPM 4000 PSI 5CP4120CSS pump from CAT Pumps is a great addition to an already high preforming 5CP line of Pressure Washer pumps. All the CAT Pumps 5CP are built to last even in the harshest conditions and usage. This 5CP4120CSS pressure washer pump is no different. Get yours today. **Please note the rails are sold separately on this 5CP4120CSS plunger pump.
5CP4120CSS Plunger Pumps
5CP4120CSS Parts Breakdown
5CP4120CSS Service Manual
The 5CP4120CSS plunger pump Features:
Industrial triplex design offers reliability and versatility.
Ultra-compact direct-drive mount to motor using bell housing and flexible coupling
Optional belt-drive for precision flow setting on the 5CP4120CSS plunger pump.
Press-in seal cases for easy servicing.
Side and rear oil gauge for easy maintenance of this CP4120CSS plunger pump.
Low pressure seals and V-packings are completely lubricated and cooled to increase pump life.
Dimensions……………….29.5 x 24.33 x 12.00″ (750 x 618 x 305 mm)
Cat Pumps 6835 & 6835K parts breakdown
The CAT Pumps – 6835 & 6835K 68 FRAME BLOCK-STYLE PLUNGER PUMP are a triplex (Three plunger rods) positive displacement, reciprocating, plunger pump, constructed of a machined, 316SS block-style inlet and discharge manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These CAT Pumps – 6835 & 6835K 68 FRAME BLOCK-STYLE PLUNGER PUMPs are suitable for harsh liquids like saltwater and leachate, special sanitizing chemicals and food products.
The Cat Pumps 6835 & 6835K Features:
Triplex plunger of these CAT Pumps – 6835 & 6835k has a design that delivers high efficiency and low pulsation.
High integrity V-Packings of PTFE/Aramid fiber blend requires no-adjustment and provides long life with harsh liquids.
Pre-Set Lo-Pressure seals on these CAT Pumps – 6835 & 6835k provide secondary protection against external leaks and require no packing adjustment.
Special high-density, polished, concentric ceramic plungers provide a true wear surface and extended seal life.
Specially formulated seals and V-Packings on these CAT Pumps – 6835 & 6835k offer unmatched performance and seal life.
Wet-end is easily serviced without entering crankcase.
Availability:: available for order Product Code: 6835 or 6835K
Price subject to change on these Plunger pumps from Cat Pump
*Flushed 6835K Models: Special ported inlet manifold permits an external flush liquid providing cooling for Hi-Temp liquids and lubrication with low lubricity liquids.
Need parts for this pump? Just enter any part number from the following parts list into our search box for pricing and availability. 6500 SERIES PARTS LIST
HYPRO 6500C-AR Roller Pump Series 6500 6-Roller
HYPRO 6500C-AR Roller Pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids. The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps.
Construction on the HYPRO 6500C-AR Roller Pump features include a cast-iron, Ni-Resist or the new SilverCast™ body and Super Rotor, 416 stainless steel shaft, sealed factory-lubricated ball bearings, cartridge-type lip seals of Viton, Buna-N or leather, and versatile Super Rollers. (Super Rollers feature the life of polypropylene and the chemical resistance of nylon.) Rotation for all models is counterclockwise for easy tractor PTO drive, except models 4001 and 4101 which are clockwise. Pumps are available in reverse rotation.
HYPRO 6500C-AR Roller Pump WITH REVERSE ROTATION FOR GAS ENGINES, 21.8 GPM @ 300 PSI @ 1200 RPM. CAST IRON 6-ROLLER PUMP WITH SUPER ROLLERS, METALLIC ROTOR, VITON SEALS, 3/4″ NPT PORTS (OUTLET ON RIGHT SIDE, INLET ON LEFT SIDE) AND A SOLID 5/8″ SHAFT.
HYPRO 6500C-AR Roller Pumps Specifications:
Rollers: Super Rollers standard (Poly, Teflon andBuna-N available)
Housing: Cast Iron, Ni-Resist or Silvercast
Port size: 3⁄4″ NPT
Shaft size: 5⁄8″ solid
Pump shaft rotation: CCW (CW available)*
1″ hose barb inlet fitting for 1000 rpm operation
Shaft Seals: Viton standard (Buna-N available)
Rotor: Super Rotor standard (Cast Iron, Ni-Resist and Silvercast available.)
The 1700XL-R – ROLLER PUMP from Hypro PumpsFeatures:
Port size: 1″ NPT
Max Fluid Temp: 140°F
Housing: Silvercast
Pump shaft rotation: CW
Rollers: Super Rollers standard (Poly [T3] and Teflon [T2] available)
Shaft seals: Viton standard
Available PTO adapters: see pg 73 of the Hypro Catalog for more information
Recommended PTO torque arm kit 3430-0540
Rotor: Silvercast
Hypro 1700XL-R 5-Roller Pump, REVERSED, With Silver Series Round-Up Ready Casing, Super Rollers, Viton Seals, 1″ NPT Ports, Solid 15/16″ Shaft. Hypro 1700XL 5-Roller Pump, With Silver Series Round-Up Ready Casing, Super Rollers, Viton Seals, 1″ NPT Ports, Solid 15/16″ Shaft. This high output pump is great for large volume applications such as large per-emergent jobs. With such high output, there is plenty of volume for jet agitation. HYPRO 1700XL-R Roller Pumps PUMP ASSY
Need parts for this pump? Just enter any part number from the following parts list into our search box for pricing and availability. 1700 SERIES PARTS LIST
1700XL-R – ROLLER PUMP from Hypro Pumps
The 1700XL-R – ROLLER PUMP from Hypro Pumpshas the following Technical Specifications:
The XWM1530N Annovi Reverberi Pressure Washer Pump Features:
GPM 4
L/Min 15
PSI 4350
Bar 300
EBHP 12
Bore Dia mm 20
Stroke mm 12.2
Crankshaft ID Stamp 5
XWM1530N Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material over sized for strength and load disbursement. These XWM1530N pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
