These new Annovi Reverberi Pressure Washer Pumps – RRV4G36D-F24 feature a new rod design, large side cover sight glass, ceramic plungers, high quality high pressure seals, new, low-pressure seal with scraper (patented), two piece plunger guides, forged brass high efficiency head design and new styling. Flows to 5.5 GPM, Pressure to 3600 PSI, RPM 1450, 1750 & 3400. The pumps come in three drive types: 24mm solid, 1” and 1-1/8” hollow shaft. Drivers: electric, gasoline, hydraulic or diesel.
Discharge Port (1)…………………………..1/2” NPTF (1/2” NPTF)
Pulley Mounting……………………………..Either side (Either side)
Shaft Diameters…………………………………..0.650” (16.5 mm)
Dimensions (280)……………..10.63 x 8.79 x 5.30” (270 x 223 x 134.5 mm)
Dimensions (290)……………..10.83 x 8.79 x 5.30” (275 x 223x 134.5 mm)
Flow…………………………………………3.0 gpm (11.4 l/m)
Pressure Range………………100 to 1000 psi (7 to 70 bar)
RPM………………………………………1330 rpm (1330 rpm)
Stroke………………………………………..0.394” (10 mm)
Weight…………………………………….11.7 lbs. (5.3 kg)
List Price: $925.58 Our Price: $712.23 You save $213.35! Availability:: available for order Product Code: BAPL-4467
PSI: 1000
GPM: 3
CAT Pressure Washer Pump
AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump WITH EASY START VALVE has: 2.2 GPM 2400 PSI 3400 RPM GAS ENGINE FLANGE BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR
The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following: INPUT: FEMALE GARDEN HOSE OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT), CONVENIENT CONNECTION TO MOST 7/8″ SHAFT ENGINES, PUMP IS PREFILLED WITH OIL.
The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has START VALVES ALLOW FOR EASY ENGINE STARTING.
This AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump is COVERED BY AR ONE YEAR WARRANTY.
The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump Features:
Annovi Reverberi /AR North America RMW2.2G24-EZ, RMW 22G24-EZ, RMW 2.2G24-EZ Vertical Radial-Axial series replacement pump (Mounts under the engine)
Axial Cam Pump with Easy Start is smooth starting and maintenance free
Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 2nd image)
NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
Some Briggs models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troy-bilt, Etc.) are Back Mounted / turned 180º (see RMW2.2G24-EZSX)
RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
RMW pumps have a standard 22mm-14 twist connect outlet.
Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.
The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following specifications:
Vertical Mount with Gas Flange 3-6 HP
Max. Volume: 2.2 GPM
Max. Discharge Pressure: 2,400 PSI
Max. Pump Speed: 3,400 RPM
Shaft Diameter: 7/8” Hollow
Engine shafts longer that 2” will require spacers or washers
Built In unloader and chemical injector
Built In easy start valve
Maximum Horsepower Requirements: 5.0 GHP
Inlet Port: 3/4″ FGH (garden hose)
Outlet Port: 22mm (Twist Connect)
Aluminum manifold w/aluminum valve plugs
Stainless steel plungers
Pump comes with oil
Weight: 5.1 lb.
AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump
List Price: $244.01 Our Price: $157.21 You save $86.80! Availability:: available for order Product Code: RMW2.2G24-EZ
Annovi Reverberi Pressure Washer Pump
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
Annovi Reverberi Pressure Washer Pump RKA4G40HN
The Annovi Reverberi Pressure Washer Pump RKA4G40HN Features are:
Forged Brass: Strength and no porosity long life. higher hydrostatic pressures – safety, performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
Bolts: Eight bolts, 8mm, grade 8.8.
Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
Ultra Form Cages: Durable, strength, and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and Oring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
Oil Capacity: 15.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
This Annovi Reverberi Pressure Washer Pump RKA4G40HN has the following specifications:
Max GPM……………… 4
Max LMP………………………… 15.1
Max PSI…………………. 4000
Max Bar…………………………. 275
Power EBHP…………… 11
Bore Dia. mm……………………. 18
Stroke mm………………. 12
Weight Lbs……………………….. 19
Max Temp………………. 140°
Oil Capacity……………………… 15oz
Inlet Thread …………… 1/2”F
Discharge Thread………………. 3/8”F
List Price: $854.02 Our Price: $532.74 You save $321.28! Availability:: available for order Product Code: RKA4G40HN
Annovi Reverberi Pressure Washer Pump
PSI: 4000
GPM: 4
Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer.
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
This is a CAT Pressure Washer Pump 56 triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.
Mi-T-M HSP-2403-3MGR Hot Pressure Washer, 2.6 GPM @ 2400 PSI, 211cc OHC SUBARU Engine. The HSP Series is designed with the Mi-T-M patented electro magnetic firing system, which means there is no need for a 12V battery, generator, blower motor and alternator; therefore, making these units especially maintenance friendly.
HSP-2403-3MGR
Pump: Direct drive triplex piston AR pump · Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · Low pressure detergent injection
Engine: Performance-proven Subaru OHC engine with low-oil protection and recoil start
Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Wand holder · Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake
Components: High quality fuel filter/water separator ensures clean fuel supply · Complete system diagnostic board · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather · Patented Electro Magnetic Firing (EMF) System · Energy efficient top fired powder coated heat exchanger designed for convenient trouble-shooting and easy maintenance · On/off burner switch
Unit Includes: 50-foot x 3/8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
Mi-T-M HSP-2403-3MGR Hot Pressure Washer
The Mi-T-M HSP-2403-3MGR Hot Pressure Washer Features:
Mi-T-M Pressure Washer Performance-proven OHV engine with low oil protection and recoil start
Direct drive triplex ceramic piston pump with forged brass manifold
Thermal relief valve
Stainless-steel and brass unloader valve
Low pressure detergent injection
Complete system diagnostic board
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner
Polyethylene burner fuel tank
Temperature rise 150 degrees F/66 degrees C above ambient, maximum outlet temperature 200 degrees F
Wand holder
Locking tire brake
Solid steel threaded axles
Pneumatic tires with tubes (4)
50 foot x 3/8 inch steel wire braided pressure hose with screw connects, swivel, and bend restrictors
Professional grade insulated trigger gun with safety lock-off
Adjustable pressure insulated dual lance with 15 degree fixed and detergent nozzle
One (1) year limited parts and labor warranty
Three (3) year limited warranty on coil
Seven (7) year limited warranty on pump
Two (2) year limited warranty on Honda engine
Three (3) year limited warranty on Subaru engine
The Mi-T-M HSP-2403-3MGR Hot Pressure Washer has the following technical specifications:
PSI 2400
GPM 2.6
Displacement/Engine 211cc Subaru OHC
Gas Tank Cap. 0.95 gallon
Burner Fuel Tank Cap. 4.0 gallon
Burner Fuel Cons. 1.53 gph
BTU Per Hour 205,000
Net Weight 269 lbs.
Shipping Weight 385 lbs.
Length 38 in.
Width 30 in.
Height 38 in.
Our Price: $4,720.00
Mi-T-M Pressure Washer CALL 1-877-824-7763 EXT 124 For Better Price Availability:: Usually Ships in 1 to 2 Days Product Code: HSP-2403-3MGR
RSV3.5G35D-F40 AR (Annovi Reverberi) Pump 3.5 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
Annovi Reverberi Plunger Pumps are designed for a wide variety of high pressure washing applications. The RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pumps are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pump are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
The RSV3.5G35D-F40 Annovi Reverbeir Pressure Washer Pump Features:
Max Flow (GPM): 3.5
Max Flow (L/Min): 13.2
Max Pressure (PSI): 3500
Max Bar: 240
Power EBHP: 10
Bore Dia: 15mm
Stroke: 8.2mm
Crankshaft ID Stamp: 8
Pump Speed (in RPM): 3400
Shaft Diameter: 1″ hollow shaft
The RSV3.5G35D-F40 Annovi Reverbeir Pressure Washer Pump has the following specifications:
Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Items NOT INCLUDED with your RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $673.67
Our Price: $421.71
You save $251.96! Availability:: Usually Ships in 24 Hours Product Code: RSV3.5G35D-F40
