Tag: pressure washer

Posted on

AR – Annovi Reverberi SHP22.50N Pressure Washer Pump

The SHP22.50N AR (Annovi Reverberi) Pump 5.8 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP22.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.

The Annovi Reverberi SHP22.50N Pressure Washer Pump Features:

  • High efficiency forged brass head & valve caps
  • Oversized “SKF” bearings are tapered for maximum life and load disbursement
  • Plungers are a special aluminum oxide blend, solid ceramic for long life

Specifications for the SHP22.50N Annovi Reverberi Pressure Washer Pump are:

  • Max. Volume: 5.8 GPM
  • Max. Discharge Pressure: 7,250 PSI
  • Max. Pump Speed: 1,450 RPM
  • Shaft Diameter: 24mm Solid
  • Max. Horsepower Requirements: 27.0 EBHP
  • Max. Fluid Temp.: 140° F.
  • Inlet Ports (2): 1/2″ Female
  • Outlet Ports (2): 3/8″ Female
  • Oil capacity: 32 oz
  • Weight: 29.0 lb.
SHP22.50N Annovi Reverberi Pressure Washer Pump

List Price: $2,853.82
Our Price: $1,763.81 
You save $1,090.01!

Accessories for the SHP22.50N Annovi Reverberi Pump…

•Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
•The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
•PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
•The INLET WATER FILTER will catch most small debris before it enters your pump
•The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
•The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
•PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

SHP22.50N Pump Parts Breakdown can be seen by Clicking Here.


Posted on

AR ( ANNOVI REVERBERI ) RSV2.5G25D-F25 TRIPLEX PRESSURE WASHER PUMP

The RSV2.5G25D-F25 AR (Annovi Reverberi) Pump 2.5 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft!

AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
2.5 GPM 2500 PSI INLET 3/8″ FPT OUTLET 3/8” MPT
3/4” SHAFT WITH GAS ENGINE FLANGE BUILT IN UNLOADER VALVE

The AR – Annovi Reverberi RSV2.5G25D-F25 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These Annovi Reverberi RSV2.5G25D-F25 pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

RSVF2.5G25D-F25 Annovi Reverberi Pressure Washer Pump

Specifications for the Annovi Reverberi RSV2.5G25D-F25 Plunger Pump are:

  • Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
  • Bolts: Eight 6mm grade 8.8.
  • Plungers: Ceramic coated stainless steel.
  • Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
  • Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
  • eliminates the crankshaft from floating.
  • Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
  • Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Oil Seals: All are constructed of Buna-N rubber.
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
  • Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

List Price: $625.93
Our Price: $392.32 
You save $233.61!

Parts Breakdown for the RSV2.5G25D-F25 can be found by Clicking Here.
Posted on

AR – ANNOVI REVERBERI SHP15.50N Pressure Washer Pump

This SHP15.50N AR (Annovi Reverberi) Pressure Washer Pump Features:

  • High efficiency forged brass head & valve caps
  • Oversized “SKF” bearings are tapered for maximum life and load disbursement
  • Plungers are a special aluminum oxide blend, solid ceramic for long life

The Specifications for the Annovi Reverberi SHP15.50N Pressure Washer Pump are:

  • Max. Volume: 3.96 GPM
  • Max. Discharge Pressure: 7,250 PSI
  • Max. Pump Speed: 1,450 RPM
  • Shaft Diameter: 24mm Solid
  • Max. Horsepower Requirements: 20.0 EBHP
  • Max. Fluid Temp.: 140° F.
  • Inlet Ports (2): 1/2″ Female
  • Outlet Ports (2): 3/8″ Female
  • Oil capacity: 32 oz
  • Weight: 29.0 lb.
Annovi Reverberi SHP15.50N Pressure Washer Pump

SHP15.50N AR (Annovi Reverberi) Pump 3.96 GPM @ 7250 PSI Annovi Reverberi / AR North America SHP15.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.

List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!

Parts Breakdown for this SHP15.50N AR – Annovi Reverberi Pressure Washer Pump can be found by Clicking Here.

Posted on

SHP Series Pumps from Annovi Reverberi

Annovi Reverberi SHP Series Pressure Washer Pumps – These AR (Annovi Reverberi) Plunger Pumps are designed with a new high efficincy brass pantented manifold. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material oversized for maximum strength and load disbursement. These Annovi Reverberi pressure washer pumps are designed for gearbox flex coupled or belt drive systems with a 24mm solid crankshaft. Flows: 3.96 to 5.8 GPM Pressure to: 7250 PSI Speeds: 1450 rpm Shaft Styles: Solid Shaft 24mm.

Click Here for the Annovi Reverberi SHP Series Pressure Washer Pump Part Breakdown.

 

SHP15.50N Annovi reverberi SHP22.50N Annovi reverberi
List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!
List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!
SHP15.50N AR (Annovi Reverberi) Pump 3.96 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP15.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F. 		SHP22.50N AR (Annovi Reverberi) Pump 5.8 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP22.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.
Posted on

CAT Pump 67DX39G1I Pressure Washer Pump

CAT 67DX39G1I Direct Drive Plunger Pump

This CAT Pump 67DX39G1I is a direct-drive triplex plunger pump, constructed of a brass manifold, 304SS stacked valve assemblies, solid ceramic plungers and standard NBR (Buna-N) o-rings, Lo-Pressure seals and V-packings.  This high performance, economy pump is a flange-mount, hollow-shafted pump designed to bolt directly to a gas engine drive, providing an easy, compact installation.  This pressure washer pump comes standard with an integral Regulating unloader and fixed chemical injector.

– Triplex plunger design provides a smooth liquid flow
– Special concentric, high-density, polished solid ceramic plungers provide a true wear surface and extended seal life.
– Built-in flange mount for easy, direct mounting to most gas engines.  Eliminates the need for pulleys, belts, gearboxes.
– Integral Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
– Stacked stainless steel valve design for long life and easy servicing.
– Fixed Chemical injector is standard and mounts directly onto Unloader to provide cleaning flexibility.

CAT Pressure Washer Pump
CAT Pump 67DX39G1I

This CAT Pump Features:

  • Triplex plunger design provides a smooth liquid flow.
  • Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
  • Built-in flange mount for easy, direct mounting to most gas engines. Eliminates the need for pulleys, belts, gearboxes.
  • Integral Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
  • Stacked stainless steel valve design for long life and easy servicing.
  • Fixed Chemical Injector is standard and mounts directly onto Unloader to provide cleaning flexibility.

CAT Pump 67DX39G1I Technical Specifications are:

  • Flow ………………………………………………………. 3.9 gpm (14.8 l/m)
  • Pressure Range…………………………….. 100 to 4000 psi (7 to 275 bar)
  • RPM …………………………………………………… 3450 RPM (3450 RPM)
  • Inlet Pressure Range…………………… Flooded to 75 psi (Flooded to 5 bar)
  • Bore…………………………………………………………. 0.551 “ (14 mm)
  • Stroke………………………………………………………. 0.405 “ (10.3 mm)
  • Crankcase Capacity………………………………….. 13.5 oz. (0.4 l)
  • Maximum Liquid Temperature ……………………… 140°F (60°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Port (1)………………………………………….. 1/2” NPTF (1/2” NPTF)
  • Discharge Port (1)………………………………….. 3/8” NPTF (3/8” NPTF)
  • Discharge Port w/Chemical Injector (1)…….3/8” NPTM (3/8” NPTM)
  • Inlet Auxiliary Port (1)……………………………… 1/4” NPTF (1/4” NPTF)
  • Shaft Diameter (Hollow)……………………………………… 1” (25.4 mm)
  • Weight………………………………………………………. 17 lbs. (7.7 kg)
  • Dimensions………………………………11.50 x 8.82 x 7.99” (292 x 224 x 203 mm)
  • Mounting Flange: SAE J609, Flange B, Extension 4 (1”Ø), Shaft Length =
  • 3 1/4”, Pilot Ø = 5 3/4”, B.C. Ø = 6 1/2”, Thread = 3/8”-16 UNC TAP

CAT Pump Parts Breakdown for this CAT Pressure Washer Pump 67DX39G1I Click Here.

CLICK here to Purchase the CAT 67DX39G1I Pressure Washer Pump.
Our current low price for the CAT Pump 67DX39G1I – Pressure Washer Pump is $847.90. Must E-mail for Best Price.
Posted on

CAT 66DX35G1I Pressure Washer Pump

CAT 66DX35G1I Pressure Washer Pump 3.5GPM 4000PSI 1″ GAS W/UNL.

List Price: $1,084.66
Our Price: $834.65 Click to order this CAT Pump.

Direct-Drive
Plunger Pump
Parts Breakdown for this CAT Pressure Washer Pump Click Here.
Repair Manual for the CAT 66DX35G1I Click Here.

The CAT Pressure Washer Pump 66DX35G1I Features are:

  • Triplex plunger design provides a smooth liquid flow.
  • Special concentric, high-density, polished, solid
  • ceramic plungers provide a true wear surface and extended seal life.
  • Compact flange mount permits easy, direct mounting
  • to most gas engines. Modular Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
  • Fixed Chemical Injector is standard and mounts directly onto Unloader to provide cleaning flexibility.

This CAT 66DX35G1I Pressure Washer Pumps Specifications are:

  • Flow ……………………………………………..3.5 GPM (13.2 L/M)
  • Pressure Range ……………………100 to 4000 PSI (7 to 275 BAR)
  • Stroke………………………………………………..0.394″ (10 mm)

 

Posted on

Annovi Reverberi RS Series Pressure Washer Pumps

Annovi Reverberi RS Series Pressure Washer Pumps – The Annovi Reverberi RSV series are designed to direct drive on gasoline engines ranging from 5 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance of 4 gpm at 4,000 psi. The Annovi Reverberi RSV series Pressure Washer Pump features a compact and efficient intergraded unloader valve and fixed chemical injector. The RSV is a result of our combined 60 years of pumps building experience and expertise. Flows: 2.5 to 4 GPM Pressure to: 4000 PSI Speeds: 3400 rpm Shaft Styles: Hollow Shaft 3/4″ and 1″.

RSV2.5G25D-F25 Annovi reverberi Pressure Washer Pump RSV3G25D-F25 Annovi reverberi Pressure Washer Pump
List Price: $625.93
Our Price: $392.32
You save $233.61!
List Price: $625.93
Our Price: $392.32
You save $233.61!
RSV2.5G25D-F25 AR (Annovi Reverberi) Pump 2.5 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft! RSV3G25D-F25 AR (Annovi Reverberi) Pump 3 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft!
RSV3G35D-F40 3 GPM @ 3500 PSI RSV4G30D-F40 4 GPM @ 3000 PSI
List Price: $654.05
Our Price: $409.64
You save $244.41!
List Price: $654.05
Our Price: $409.64
You save $244.41!
RSV3G35D-F40 AR (Annovi Reverberi) Pump 3 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft! RSV4G30D-F40 AR (Annovi Reverberi) Pump 4 GPM @ 3000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
RSV4G40D-F40 Annovi reverberi Pressure Washer Pump RSV3.5G35D-F40 Annovi reverberi Pressure Washer Pump
List Price: $673.67
Our Price: $421.71
You save $251.96!
List Price: $673.67
Our Price: $421.71
You save $251.96!
RSV4G40D-F40 AR (Annovi Reverberi) Pump 4 GPM @ 4000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft! RSV3.5G35D-F40 AR (Annovi Reverberi) Pump 3.5 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
Posted on

CAT Pressure Washer Pump 2SF10SEEL

CAT Stainless Steel Direct-Drive Plunger Pressure Washer Pump

Our Price: $1,179.00 Click to order the CAT 2SF10SEEL Pressure Washer Pump or
Call 1-877-824-7763  for a better price

CAT 2SF10SEEL Pressure Washer Pump FEATURES:

•Rugged 316SS design engineered for SWRO high duty cycles.
•High efficiency triplex design with unique spring loaded inlet valves and flow through plungers for smooth low pulsation flow.
•56C direct-drive 50/60 Hz motor satisfies international power requirements.
•Compact motor-pump units provide the smallest possible footprint for challenging spaces.

COMMON SPECIFICATIONS of the 2SF10SEEL CAT Pressure Washer Pump are:

Inlet Pressure Range……………….Flooded to 60 psi (Flooded to 4 bar)
Shaft Diameter…………………………………………..5/8” (15.9 mm)
RPM………………………………………………….1725 rpm (1725 rpm)
Bore………………………………………………………0.709” (18 mm)
Bore (2SF42SEEL Only)…………………………..0.787” (20 mm)
Maximum Liquid Temperature…………………..160°F (70°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Crankcase Capacity………………………………12.0 oz. (0.36 l)
Inlet Port (1)………………………………………3/8” NPTF (3/8” NPTF)
Discharge Ports (2)…………………………….3/8” NPTF (3/8” NPTF)
By-Pass Return Port (1)……………………..1/4” NPTF (1/4” NPTF)
Weight (Pump Only)……………………………….8.9 lbs. (4 kg)
Dimensions (Pump Only)………………6.8 x 8.7 x 5.2” (173 x 221 x 133 mm)
Flow (60 Hz-1725 rpm)……………………………….1.0 gpm (3.8 l/m)
Flow (50 Hz-1450 rpm)……………………………..0.84 gpm (3.1l/m)
Discharge Pressure Range…………………..100-1200 psi (7-85 bar)
Stroke………………………………………………………..0.122” (3.1 mm)

CAT 2SF10SEEL Pump Breakdown pdf CLICK HERE.
2SF10SEEL CAT Pressure Washer Pump Repair Manual Click Here.

Posted on

Annovi Reverberi SXW Series Pumps

Annovi Reverberi SXW Series Pressure Washer Pumps – Plunger Pumps are designed for high-pressure  industrial washing applications. These Annovi Reverberi pressure washer pumps are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft. Flows: 3.96 to 7 GPM Pressure to: 5100 PSI Speeds: 1450, 1750 rpm Shaft Styles: Solid Shaft 24mm

SXW15.35 Annovi reverberi Pressure Washer Pump SXW21.35 Annovi reverberi Pressure Washer Pump
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
SXW15.35 AR (Annovi Reverberi) Pump 3.96 GPM @ 5100 PSI SXW21.35 AR (Annovi Reverberi) Pump 5.55 GPM @ 5100 PSI
SXWA4G50 Annovi reverberi Pressure Washer Pump SXWA5.5G50 Annovi reverberi Pressure Washer Pump
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
SXWA4G50 AR (Annovi Reverberi) Pump 4 GPM @ 5000 PSI SXWA5.5G50 AR (Annovi Reverberi) Pump 5.5 GPM @ 5000 PSI
SXWA7G50 Annovi reverberi Pressure Washer Pump
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
SXWA7G50 AR (Annovi Reverberi) Pump 7 GPM @ 5000 PSI
Posted on

CAT Pressure Washer Pump 2520

CAT Pressure Washer 25 Frame Piston Pump:

Standard Brass Models 1520,2520
Stainless Steel Models 1521,2521
Pulse Pump Manifold Models 1525,2525
Hi-Temp Model 2520C

Call 1-877-824-7763 {Smart Phones Click to Call} for pricing and availability on this CAT Pressure Washer Pump: 2520

CAT Pressure Washer Pump 2520 FEATURES:
•Superior Design
•Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
•Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
•Mechanically actuated inlet valves give strong lift and easy prime.
•304 stainless steel flat valve design offers positive seating and greater suction capabilities.
•Oil bath crankcase assures optimum lubrication.

Quality Materials used in the 2520 CAT Pressure Washer Pump are:
•Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
•Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
•Special high strength TNM connecting rods offer superior bearing quality strength.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Oversized crankshaft bearings with greater loading capacity mean longer bearing life.

The CAT 2520 Pressure Washer Pump has Easy Maintenance:
•Stepped stainless steel piston rod and with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
•All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
•Wear parts are available in convenient kits.

CAT Pressure Washer MODEL 2520, 2521, 2525 and 2520C Specifications:
Flow ……………………………………………………………..25 GPM (95 L/M)
Pressure Range ……………………………………100 to 800 PSI (7 to 55 BAR)
RPM……………………………………………………………772 RPM (772 RPM)
Bore ………………………………………………………………..1.490″ (38 mm)
Inlet Pressure Range ………………………Flooded to +40 PSI (Flooded to +2.8 BAR)
Maximum Liquid Temperature……………………………..210°F (98°C)
Flushing Ports (2) ………………………………………..1/4″ NPTF (1/4″ NPTF)
Dimensions ………………………………………21.42 x 15.04 x 7.8″ (544 x 382 x 198 mm)
Stroke ……………………………………………………………..1.417″ (36 mm)
Inlet Pressure Range ……………………………–8.5 to +40 PSI (–0.6 to +2.8 BAR)
Crankcase Capacity …………………………………………..84 oz. (2.5 L)
Maximum Liquid Temperature……………………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Inlet Ports (1)……………………………………………1-1/4″ NPTF (1-1/4″ NPTF)
Discharge Ports (3) ………………………………………..1″ NPTF (1″ NPTF)
Pulley Mounting ………………………………………….Either side (Either side)
Shaft Diameters ………………………………………………..1.181″ (30 mm)
Weight ………………………………………………………….69.3 lbs. (31.5 kg)
Dimensions…………………………………….21.62 x 15.04 x 7.8″ (549.15 x 382 x 198 mm)

CAT Pressure Washer Pump Breakdown for 2520 Click Here.
CAT 2520 Pressure Washer Pump Repair Manual Click Here.

Call 1-877-824-7763 {Smart Phones Click to Call} for pricing and availability on this CAT Pressure Washer Pump: 2520