General Pump – T Series 50, T991

T991 GENERAL PUMP,T SERIES 50

 

Features

  • Triplex Plunger Pump
  • Maximum Volume: 4.0/3.5 GPM
  • Maximum Discharge Pressure: 1100/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1750/1450 RPM
  • Minimum Horsepower Requirements: 3.6 bhp (multiply by 1.5 for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .394″ (10mm)
  • Crankcase Capacity: 15.2 oz. (nondetergent SAE 30W oil)
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port Thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 9.3″ x 8.3″ x 5.4″
  • Weight: 18.7 lb.
  • Forged brass manifold with an exclusive lifetime warranty
  • Die cast, anodized aluminum oil bath crankcase
  • Solid ceramic plungers with continuously lubricated packings
  • The original InterPump unitized stainless steel Kit 1 inlet and outlet valves
  • Standard 24mm soid shaft for pulley mounting
  • Flex coupling and bell housing available for direct drive
  • Ideal for all general cleaning/washing applications
  • Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter
  • The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
  • General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, Gernal Pump/US warrants allforged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
  • In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
  • The following items are NOT warranted, due to matters beyond General Pump/US control.
  • Normal wear and tear to parts that are considered standard wear parts.
  • Defects caused by the fault or negligence of the buyer or third party.
  • Use of unauthorized repair parts, or;
  • modifications made by the customer.

List Price: $585.02

Our Price: $450.17

You save $134.85!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

HYPRO Car Wash Plunger Pump 2535s

HYPRO CAR WASH PLUNGER PUMP

The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.

  • 38GPM
  • 1200 Max PSI
  • 800 Max RPM
  • oil bath crankcase
  • ceramic plungers
  • 35mm OD solid shaft
  • 1 1/2″ NPT inlet port
  • 1″ NPT outlet port

List Price: $6,424.00

Our Price: $4,108.03

You save $2,315.97!

CLICK HERE TO PURCHASE

AR (annovi reverberi)XW-M26.20 6.87 GPM @ 2900 PSI Pump

AR (annovi reverberi)XW-M26.20 6.87 GPM @ 2900 PSI Pump

AR (annovi reverberi) XW Series Pumps – Plunger Pumps are designed for high-pressure industrial washing applications. The AR (annovi reverberi) XW Series Pumps are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components of AR (annovi reverberi) XW Series Pumps include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. AR (annovi reverberi) XW Series Pumps valve cages of special designed Ultra-Form provide positive seating and extended life. AR (annovi reverberi) XW Series Pumps two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These AR (annovi reverberi) XW Series Pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft. Flows: 3.96 to 13 GPM Pressure to: 4350 PSI Speeds: 500, 1000, 1450, 1750 rpm Shaft Styles: Solid Shaft 24mm

List Price: $1,019.94

Our Price: $627.88

You save $392.06!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

CAT Pump 2DX15ES.MIST Plunger

CAT Pump 2DX15ES.MIST Plunger

List Price: $649.00

Our Price: $388.99

You save $260.01!

CAT Pump 2DX15ES.MIST Plunger Features:

  • Triplex plunger design provides a smooth liquid flow.
  • Specially formulated Hi-Pressure Seals and concentrically
  • ground ceramic plungers assure maximum seal life.
  • Stacked Stainless steel valve design for long life and
  • easy servicing.
  • Ultimate compact, direct-drive unit for maximum portability.
  • Standard Integral Regulator with built-in by-pass
  • assures system pressure control and pump protection.

CAT Pump 2DX15ES.MIST Plunger Specs:

  • Inlet Pressure Range ………………………..Flooded to 60 PSI (Flooded to 4 Bar)
  • Bore ………………………………………………………………..0.630″ (16 mm)
  • Max. Liquid Temperature ……………………………………140°F (60°C)
  • Crankcase Capacity………………………………………….8.5 oz. (0.25 L)
  • Inlet Ports (1) ……………………………………………..3/8″ NPTF (3/8″ NPTF)
  • Discharge Port (1) ………………………………………3/8″ NPTM (3/8″ NPTM)
  • Shaft Diameter……………………………………………………..5/8″ (15.8 mm)
  • Weight ………………………………………………………….10.7 lbs. (4.9 kg)
  • Dimensions ……………………………………..7.75 x 7.12 x 6.29″ (197 x 180 x 160 mm)
  • NOTE: 3450 RPM models with 1725 RPM motor deliver half original flow.

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

LANDA SLX- SLT Portable Hot Water Pressure Washer

LANDA SLX- SLT Portable Hot Water Pressure Washer

The Only Portable Hot Water Pressure Washer

that Delivers 200°F Cleaning at up to 10 GPM

Dual-Gun Ready

Powered by Gasoline

or Diesel; Diesel-Heated

Belt-Drive Landa Pump

with 7-Year Warranty

3/4″ Schedule 80 Coil

The LANDA SLX- SLT Portable Hot Water Pressure Washer is Pre-plumbed with 3-Way Valve to bypass float tank when drawing water directly from an auxiliary tank.

Has Extra-large Heating Coil made ofcold-rolled, 3/4″ Schedule 80 steel pipe with 5-year warranty; features Stainless Steel Top Wrap; unique lift-out design for easy and quick Coil Access. SLX-SLT Hot Pressure Washer also comes with a Rugged 2″ x 4″ x 1/8″ thick box steel frame, with compact footprint, shields key components; further protected by weather-resistant Epoxy Powder Coat finish; Power Platform is vibration isolated to minimize frame stress.

Other SLX- SLT Portable Hot Water Pressure Washer Specifications are Water-resistant, metal Control Panel has adjustable thermostat, combination hour meter and tachometer, volt meter, burner switch and tri-lingual operating instructions for added safety. ®Manufactured To Cleaning Equipment Trade Association Performance Standards Cleaning Equipment Trade Association Performance Certified TM REGISTERED SLX. Adjustable Detergent and Steam Valves provide precise metering of soap and on-demand wet-steam cleaning.. Industrial-duty tri-plunger Landa Pump designed to run atlow RPM for long life,7-year warranty, with single-rail true-track Pulley Adjustment.

The LANDA SLX- SLT Portable Hot Water Pressure Washer also Comes with Gasoline-powered Vanguard and Honda Engines, or watercooled, 16‑27 hp diesel Kohler Engine all come with keyed electric starter for easy start-up and protection against unauthorized use; polyurethane Battery Box with vibration isolators protects and firmly secures battery (battery not included).

WHY CHOOSE LANDA’s SLX or SLT

When it comes to heavy-duty grease or grime, most high-volume, hot water pressure

washers fall short with their 150°F water. Landa’s SLX, and smaller SLT, are the first power

washers ever designed to deliver a high-volume flow at 200°F water, hot enough to melt the

toughest of oily messes. The SLX delivers enough hot water flow—up to 9.5 GPM—that

you can operate two spray guns at the same time!

Other benefits include:

QUALITY: Packed with Landa quality throughout, the SLX and SLT feature a top-of-the-line,

belt-drive Landa Pump with 7-year warranty and low RPM for extended life, as well as a giant

Schedule 80 heating coil, made of up to 300 ft. of 3/4‑inch steel pipe with 5-year warranty.

DURABILITY: Extraordinarily rugged frame is made of 2-by-4-inch box steel with an

all-metal power platform cushioned by 10 vibration isolators to minimize frame stress.

EFFICIENT: The SLX-SLT is heated by a high-efficiency Beckett burner with dual rings

for dial-in air flow. The 3/4″ heating coil is amazingly efficient due to its unique “breathing”

design so it heats quieter while promoting optimum heat exchange.

FUNCTIONAL: The SLX-SLT has a remarkably compact footprint, is certified to UL-1776 safety standards, is pre-plumbed for drawing water from an auxiliary

tank, has six forklift guides for portability and the control panel is ideally positioned for curb access when the unit is mounted on a trailer or truck bed.

Call Us for information on this Great Portable Hot Water Pressure Washer

Toll Free: 1-877-824-7763

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Valve Kit GENERAL PUMP – K01

Valve Kit GENERAL PUMP – K01 Click to Purchase this kit here.

KIT 1 (K01) – VALVE ASSEMBLY [ GENUINE GENERAL PUMP PARTS ]

This General Pump repair kit (K01) services 6 cylinders and includes the following items:

O-ring: 90.3841.00

Valve seat: 36.2003.66

Valve: 36.2001.76

Spring: 94.7376.00

Valve guide: 36.2002.51

KIT 1 (K01) – VALVE ASSEMBLY fits Models: General Pump 47, 49, 50 and 51 Series

Specifications: 1 Per Pump.

List Price: $82.30

Our Price: $51.15 Click to order K01 Valve Kit from General Pump.

You save $31.15!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

COMET Pump ZWD4040G Pump Made Ready

COMET Pump ZWD4040G Pump Made Ready

P.M.R. ZWD4040G-VRT3-310EZ, Comet Pump FULLY PLUMBED!

Comet PUMPS MADE READY ARE NOT TESTED PRIOR TO SHIPPING. THE UNLOADER AND PRESSURE RELIEF VALVE MAY NEED ADJUSTING BEFORE USAGE. *TESTING IS AVAILABLE ON 3400 RPM PUMPS MADE READY

Industrial grade Comet triplex pump with oil sight glass and oil drain plug. Includes EZ-grip quick connect coupler, water inlet with a clear bowl filter for easy inspection, and chemical injector. The pump features an adjustable pressure unloader, external bypass hose, and thermal relief valve to help protect the pump from overheating.

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Hypro Pump – 9910-D252 Diaphram Pump

Hypro Pump 9910-D252

  • Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.
  • Pressure and output are designed for optimum performance of small to medium-sized sprayers. Hypro medium pressure diaphragm pumps can be adapted for male 1-3/8″ splined shaft, female 1-3/8″ splined shaft, 1″ solid shaft, or gear reduction drive options. Pumps include a pulsation dampener.

Performance Information

• Max. flow: 6 gpm/22.7 lpm

• Max. pressure: 290 psi/20 bar

• Max. rated speed: 650 rpm (D252); 3600 rpm (D252GRGI, D252GRGIAP and D252GRGI58)

• Max. fluid temperature: 140°F/60°C

Other Attributes

• Port sizes: 3⁄4″ HB inlet, 1⁄2″ NPT outlet (D252); 3⁄8″ HB outlet (all gear reduction models)

• Shaft (D252): 3⁄4″ solid keyed

• Shaft (D252GRGI): 3⁄4″ hollow shaft with gear reduction for 2 to 3-1/2 hp gasoline engine

• Shaft (D252GRGI58): 5⁄8″ hollow shaft with gear reduction for 2 to 3-1/2 hp gasoline engine

• Shaft (D252GRGIAP): 3/4″ hollow shaft with a 5⁄8″ output shaft and gear reduction for 3 hp gasoline engine

• Housing: anodized aluminum

• Diaphragms: 2, semi-hydraulic

• Mounting base included

• Crankcase Oil Capacity: 13 oz.

• Weight: 12 lbs./5.4 kg (D252); 14 lbs./6.4 kg (all gear reduction models)

List Price: $775.00

Our Price: $508.79 Click to order Hypro Pump 9910-D252

You save $266.21

Hypro Pump 9910-D252 Parts Breakdown PDF Click Here

General Pump – Electric Pressure Washers


General Pump Complete Electric Pressure Washers 

 

Photo(Where available) Part Name/Number Description

FOR99SM

FORMULA 99 – Turbo 21 pressure Washer, aluminum manifold

190118

QUIKY – Turbo 21 pressure washer,

brass manifold

PU1021

BOXJET – aluminum manifold

PU1021B

BOXJET – brass manifold

PU1021QB

QUIKY, brass manifold

CLEANMATIC

Pressure Washer

General Pump Electric Pressure Washer Accessories 

 

 

 

 

Photo(Where available) Part Name/Number Description

No Photo

Z0BOXCART

Cart kit for Boxjet

No Photo

Z0BOXWALL

Wall Brackets for Boxjet

No Photo

Z0BRUSHKIT

Boxjet rotating brush kit

Z0SANDKIT1

Boxjet sandblasting kit

No Photo

100200

Universal cart for pressure washer

 

 

 

 

 

 

Don’t replace your Pressure Washers, Repair them in the Delaware Valley

ETS offers Pressure Washer Service on virtually ALL brands (ALL makes
and models) of pressure washers, steam cleaners and pressure washer
pumps to the Delaware Valley. We service brands like LANDA, Mi-T-M,
Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump
and more! (We also carry Pressure
Washer Pump Parts
Click
here
) Call today at 610-583-7657.

Pressure Washer Service

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.