Spotlight on the XMV3G30D-F24 Pressure Washer Pump.
XMV3G30D-F24 3GPM 3000PSI 1″ GAS FLANGE:
XMV3G30D-F24 Pressure Washer Pump.
Technical Specifications of the XMV3G30D-F24 Pressure Washer Pump:
Triplex Plunger Pump
Direct Drive with Gas Flange
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 3000 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Shaft Diameter: 1″ ID with gas flange
Weight: 19 lb.
This XMV3G30D-F24 Pressure Washer Pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in postion on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
You save $266.06! Availability:: available for order Product Code:6501.0059.00
Price subject to change on the 6501.0059.00 AXD 2527 G-T Pressure Washer Pump
You save $1,806.61! CALL 1-877-824-7763 for More information Availability:: available for order Product Code: HPW3050-OEP
Price on the HPW3050-OEP subject to change
Spotlight on the Annovi Reverberi / AR North America XMV3G27D-F25 pump.
Annovi Reverberi / AR North America XMV3G27D-F25 pump.
This XMV3G27D-F25 Version with F25 flange series pumps are designed to direct drive on gasoline
engines ranging from 5 – 7 HP. The XMV3G27D-F25 pump Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components on the XMV3G27D-F25 pump include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. The XMV3G27D-F25 pump has over sized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drives this XMV3G27D-F25 pump. One-piece connecting rods are special alloy aluminum, over sized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems.
Technical Specifications of this XMV3G27D-F25:
Triplex Plunger Pump
Direct Drive with Gas Flange 3-6.5 HP SAE
Max. Volume: 3.0 GPM
Max. Discharge Pressure: 2,700 PSI
Max. Pump Speed: 3400 RPM
Shaft Diameter: 3/4” Hollow
Max. Horsepower Requirements: 7.3 GHP
Max. Fluid Temp.: 160 degrees F.
Inlet Ports (2): 1/2″ BSP
Discharge Ports (2): 3/8″ BSP
Drive Side: Standard right
Forged brass head & valve covers
Solid ceramic plungers
Weight: 19.0 lb.
The XMV3G27D-F25 pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
Spotlight on the AR388 AR Blue Clean Pressure Washer from Annovi Reverberi.
Annovi Reverberi AR388
Features of the AR Blue Clean Pressure Washer AR388:
PSI 1800
GPM 1.51
Horsepower 1.5
Amps 14
Motor Type Universal 120V 60Hz
Temperature 122° F
Weight 28
Specifications of the AR388 AR Blue Clean Pressure Washer AR388:
· Triplex Plunger pump with axial wobble plate
· Total Stop System for automatic start/stop
· Trolly with wheels
· Accessory holder
· Water filter adapter
· Quick connect garden hose adapter
· Universal electric motor
· Adjustable spray head with special fan jet settings
· Foam soap dispenser
· Turbo nozzle lance
· 20′ high pressure hose
· Integrated hose reel (for storage use only)
Before you purchase your AR388 Blue Clean pressure washer from the big box stores like Home Depot or Lowes, be sure to check Equipment Trade Service Company out. We were around serving the pressure washer industry since 1956. We pride ourselves on customer service and that’s why we have been around for so long. The big box stores like Lowes and The Home Depot can’t give you the one on one service you need as a homeowner or contractor.
Spotlight on the Bolt-N-Go special RKV4G37D-F24-C Pressure Washer Pump from Annovi Reverberi.
RKV4G37D-F24-C Pressure Washer Pump from Annovi Reverberi
Technical Specifications of the RKV4G37D-F24-C pressure washer from Annovi Reverberi:
Maximum volume: 4 GPM
Maximum discharge pressure: 3700 PSI
Horsepower: 9.75 GHP
Maximum pump speed: 3400 RPM
Hollow shaft I.D: 1″
Bore: 18mm
Stroke: 7.0 mm
Inlet port thread: 1/2″ FPT
Discharge port thread: 3/8″ FPT
Maximum fluid temperature: 140 F.
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Weight: 21 lbs.
Features of the RKV4G37D-F24-C pressure washer from Annovi Reverberi:
Manifold of this RKV4G37D-F24-C: High strength forged brass for long term use
Bolts: Eight 8mm grade 8.8
Plungers on the RKV4G37D-F24-C: A special thick ceramic for long life, strong durability, and more resilience
Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings on this RKV4G37D-F24-C: Over sized tapered roller bearing for maximum life and load disbursement
Bearing Support: Precision die cast and machined to assure concentricity and alignment
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form cages to provide long life and positive seating
The RKV4G37D-F24-C has Seals and V-packing: Continuously lubricating for extended life
Plunger Rods: Stainless steel construction for strength, no plating to scrape off, back up and oring plunger sealing system
Connecting Rodson the RKV4G37D-F24-C: One piece special alloy aluminum for higher pressure, oversized for maximum strength, load disbursement, and long life
RKV4G37D-F24-C Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze over sized for strength and load disbursement. These RKV4G37D-F24-C pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
WARRANTY of this RKV4G37D-F24-C:
Annovi Reverberi (A.R.) cam shaft plunger pumps are warranted to the original purchaser for a period of 5 years from the date shipped from factory or U.S. warehouse. Warranty covers manufacturing defects or workmanship that may develop under normal use and service in a manner up to the directions and usage recommended by the manufacturer.
Warranty does not apply to misuse or when the RKV4G37D-F24-C pump or accessory is altered or used in excess of recommended speeds, pressures, temperatures, or handling fluids not suitable for pump or accessory material construction. Warranty does not apply to normal wear, freight damage, freezing damage, or damaged caused by parts or accessories not supplied by AR North America, Inc.
Liability of manufacturer for warranty is limited to repair or replacement at the option of the manufacturer when such products are found to be of original defect or workmanship at the time it was shipped from the factory. This warranty is in lieu of all other warranties, expressed or implied, including any warranty or merchantability and of any and all other obligations or liabilities on the part of the manufacturers or equipment.
ETS BOLT-N-GO PUMP PACKAGE SPECIAL!
EACH PUMP PACKAGE COMES INDIVIDUALLY PACKAGED, BRAND NEW – FACTORY TESTED! THIS PACKAGE CONSISTS OF ONE RKV4G37 3400 RPM D VERSION 1” (WITH GAS ENGINE FLANGE) PUMP WITH BOLT-ON STYLE UNLOADER (EITHER MINI-MATIC, GYMATIC OR VR35), CHEMICAL INJECTOR, THERMAL RELIEF VALVE (AKA PUMP GUARD), GARDEN HOSE THREAD & FILTER AND 3/8 IN. PLUG OUTLET.
JUST REMOVE YOUR OLD 1 IN. GAS ENGINE FLANGE PUMP AND BOLT THIS ONE ON!
Spotlight on the 1.3 HP P1615EN pressure washer from BE Pressure.
P1615EN pressure washer from BE Pressure
This P1615EN pressure washer from BE Pressure, is a perfect mobile model for the average home user of pressure washers. It’s powerful 1.3HP electric motor combines with 1.5 GPM to give you 1600 PSI of cleaning power. This powerful mixture is enough for the home owner or small business to clean their entire property in just under a few hours with a professional look.
Features of the P1615EN pressure washer by BE:
Key Points on this BE Pressure WASHER P1615EN
1600 PSI Max Pressure
1.5 GPM Max Flow
Powered by a 1.3HP electric motor
So don’t pay a pro to clean you house, siding or small business; for as little as $200.00 you can get this powerful little machine and do it yourself. For the cost of a 1 time cleaning by a pro, you can have years and years of self cleaning with little or no experience. Plus you know the job is getting done right the first time fast, safe and effectively as possible with this little work horse from BE pressure. The P1615EN small machine big results. Get it now for you home or small business.
Introducing the new Hot2Go® HV13002E1H Series electric powered, diesel heated pressure washers.
The HV13002E1H Series offers great portability with the included wheel kit. Choose either the 115V/15amp or 208/230V/24amp power supply, includes a 35′ GFI protected cord. Water output up to 250°F with 8 gallon all-day diesel tank for the diesel fired burner system. The HV13002E1H Includes gun, wand, 50′ hose, quick connect nozzles, adjustable thermostat, pressure relief valve, and safety burst disc. This compact HV13002E1H pressure washer is built to last with an industrial pump and motor.
The HV13002E1H Pressure Washer Steamer Features:
High efficiency heating system will quickly heat water up to 250° wet steam
The HV13002E1H has a Downstream soap injection
Stainless steel insulated coil enclosure
This HV13002E1H comes with Wheel kit and integrated hose / electrical cord storage hooks
Spotlight on this new pressure washer pump from Annovi Reverberi the RTX30
Annovi Reverberi Pressure Washer Pump RTX30
The RTX30 pressure washer pump from Annovi Reverberi Features:
MAX GPM 7.9
MAX L/Min 30
MAX PSI 4350
MAX BAR 300
Power EBHP 23.6
BORE DIA MM 20
Stroke DIA MM 23
Crankshaft ID 3
The AR Annovi Reverberi Pressure Washer Pump RTX30 features a forged nickel plated brass strength manifold with no porosity for long life. The plungers of the AR Annovi Reverberi Pressure Washer Pump RTX30 as a special aluminum oxide blend, with solid ceramic for long life and strength durability. The bearings are Over sized for load disbursement. The Oil seals are constructed of Buna-N Rubber. The o-rings have stainless steel garder springs to assure tension on the sealing surface. The plunger rods on the AR Annovi Reverberi Pressure Washer Pump RTX30 are made of stainless steel and the connecting rods are a heavy two piece aluminum, over sized for maximum strength , load disbursement and life. The crankshafts on the AR Annovi Reverberi Pressure Washer Pump RTX30 are forged and heat treated to add strength, durability and long life of these pumps from Annovi Reverberi.
Here is a spotlight on the RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi
RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi
These RXV35G30D & RXV3G30D-EZ pressure washer pumps by Annovi Reverberi Feature:
Manifold:
– Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
– Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
– Bolts: Three bolts, 10mm, grade 8.8.
Valves:
– Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Machined brass for greater strength.
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
– Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
– Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
– Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
This AR RXV35G30D & RXV3G30D-EZ pump is designed for medium duty loads. They spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. This RXV35G30D & RXV3G30D-EZ pump has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
