Discharge Port (1)…………………………….3/8″ NPTM (3/8″ NPTM)
Shaft Diameter ………………………………..5/8″ Hollow (15.8 mm Hollow)
Weight………………………………………………..10.7 lbs. (4.9 kg)
Dimensions……………………………7.99 x 7.75 x 6.29″ (203 x 197 x 160 mm)
CAT Pump 1DX015ELS.MIST Pressure Washer Pump
CAT Pump 1DX015ELS.MIST Pressure Washer Pump
Parts Breakdown
Service Manual
CAT Pump 1DX015ELS.MIST Pressure Washer Pump
Our Price: $608.00 Availability:: available for order Product Code: 1DX015ELS.MIST
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS CAT Pump 1DX015ELS.MIST Pressure Washer Pump 11/02/2011
AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump
AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump 3 GPM @ 3200 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
PARTS LIST: XMV3G32D-F24 Pressure Washer Pump
AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Plunger Pumps are designed for a wide variety of high pressure washing applications. The AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump is constructed with die-cast bodies and feature a brass head. Internal components of the AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation on this AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life for this AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. This AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems.
The AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump Features:
• Manifold:
– Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
– Inlet and Discharge Ports: Heavy bosses for added strength.
– Offset Discharge Ports: High efficiency, smooth flow.
– Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
– Ultra Form Cages: Durability, strength and long life.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Machined brass – greater strength.
• Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
– Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
• Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
• Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
• Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
• Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
• Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
• Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
• Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
• Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
• Oil Capacity: 14.5 oz., refer to parts breakdown.
• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
• Hot Water: High temperature kits are available to 180º F. Refer to breakdown
• Wet End Repair: Very simple no special tools are required.
• Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
• Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump
The AR (Annovi Reverberi) XMV3G32D-F24 Pressure Washer Pump has the following specifications:
Max GPM………………3 Max
LMP…………………………11.4
Max PSI………………….3200
Max Bar………………………….220
Power EBHP……………5.5
Bore Dia. mm…………………….15
Stroke mm……………….7.6
Weight Lbs………………………..16
Max Temp……………….140°
Oil Capacity………………………14.6oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
Items NOT INCLUDED with your XMV3G32D-F24 pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your XMV3G32D-F24 pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the XMV3G32D-F24 pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your XMV3G32D-F24 pump.
The EZ-START VALVE ON THIS XMV3G32D-F24 will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer.
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your XMV3G32D-F24 pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your XMV3G32D-F24 pump!
PUMP OIL, you can never have enough on hand! Many XMV3G32D-F24 pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $597.40 Our Price: $374.76 You save $222.64! Availability:: available for order Product Code: XMV3G32D-F24
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 11/01/2011
Hypro Series 9303S-HM4C Hydraulic Motor Drive centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc.
Hypro Series 9303S-HM4C hydraulic motor-driven centrifugal pumps provide smooth performance. The Series 9303S-HM4C can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the Series 9303S-HM4C pump and motor.
This broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel Series 9303S-HM4C pumps are ideal for use with Roundup® or other acid applications.
Pump seals: Cast Iron models – Viton/ceramic are standard; Stainless Steel models – Life Guard™ silicon carbide (Buna-N/ceramic and Viton/silicon carbide are available)
Weight: 26 lbs./11.8 kg
Motor: internal gear gerotor
Motor capacities: 4-24 gpm/15.1-90.8 lpm
9303S-HM4C: 6-9 gpm/34-38 lpm
Max. motor psi: 2000 continuous duty, 2200 intermittent duty
Hydraulic ports: 1⁄2″ NPT
Hydraulic motor seal: double-lip Teflon
List Price: $1,878.00 Our Price on the HYPRO 9303S-HM4C Centrifugal Pump: $1,214.45 You save $663.55! Availability:: available for order Product Code: 9303S-HM4C
Hypro Pressure Washer Pump
PRICE SUBJECT TO CHANGE ON THIS HYPRO 9303S-HM4C Centrifugal Pump, PRICE VALID 10/28/2011
The AR2233 Valve Kit for all Annovi Reverberi RM Series Pressure Washer Pumps.
AR2233 Valve repair kit for RMW series of pumps from Annovi Reverberi.
AR2233 Annovi Reverberi
This AR2233 is for models RMW2G20, RMW2.2G24, RMW2G23B, RMW2G24, RMW2G25, and RMW2.2G20D only. AR VALVE KIT AR2233 CONTAINS 6 VALVE ASSEMBLIES AND O-RINGS TO SERVICE 3 CYLINDERS ON YOUR AR PRESSURE WASHER PUMP.
AR2233 Annovi Reverberi
The AR2233 work with all Annovi Reverberi RM Series Pressure Washer Pumps. These Annovi Reverberi plunger pump will pump up to 2.5 GPM at 2500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” and 7/8″ shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Flows: 2 to 2.5 GPM Pressure to: 2500 PSI Speeds: 3400 rpm Shaft Styles: Hollow Shaft 3/4″ and 7/8″.
AR2233 Annovi Reverberi
While these AR2233 valves might seem small and insignificant, they play a vital roll in the Annovi Reverberi RM and RMW pumps being able to build up pressure to allow the operator to finish their project quickly and economically. So if your a contractor who’s RM annovi reverberi pump run pressure washer is lacking the power to pressure clean, look at these valves first. If they seem worn or missing replace them with the genuine repair kit AR2233 from ETS Co. and Annovi Reverberi.
BE CD-3024HTEBCOM Pressure Washer 24HP 3000psi Truck Mount Comet TW8030 Pump
The CD-3024HTEBCOM BE pressure washer is a heavy duty gas power washer that features a reliable 24 HP Honda GX690 Engine, to go along with a high quality Comet TW8030 Washer pump. The CD-3024HTEBCOM BE pressure washer is a Truck Mounted pressure washer for property and small business owners, construction workers and handymen.
The CD-3024HTEBCOM BE pressure washer Features:
The CD-3024HTEBCOM BE pressure washer has 3000 PSI Max Pressure (275 BAR).
8.0 GPM Max Flow (15.2LPM).
The CD-3024HTEBCOM BE pressure washer comes with Dual outlets with shutoff valves to easily run two spray guns at once.
The CD-3024HTEBCOM BE pressure washer is Powered by a commercial-grade 24HP Honda GX670 gas engine with steel gas tank & engine oil alert.
Industrial Aluminum frame with anti-vibration rubber feet easily mounts to truck/trailer bed.
The CD-3024HTEBCOM BE pressure washer has Cooldrive technology is designed to keep the pump cool to help protect the pump from overheating.
Cool air is draw in over the pump reducing the heat by 25%.
The CD-3024HTEBCOM BE pressure washer comes standard with a Comet TW8030 Pump.
BE CD-3024HTEBCOM Pressure Washer
This CD-3024HTEBCOM BE pressure washer has the following technical specifications:
24 HP Honda GX690
PSI 3000
GPM 8.0
Comet TW8030 Pump
List Price: $5,598.00 Our Price on This CD-3024HTEBCOM BE pressure washer: $3,998.00 You save $1,600.00! Availability:: available for order Product Code: CD-3024HTEBCOM
BE Pressure Washer PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CD-3024HTEBCOM BE pressure washer 10/27/2011
Don’t forget in order to help you with your endeavor to winterize this CD-3024HTEBCOM BE pressure washer or any other pressure washer and it’s pump we at shopetsonline are offering you 10% off every purchase over $100 from Oct 26th 2011 – Nov 18th 2011!
Just enter the code “winterize” at check out on your order over $100.00 at shopetsonline and the supplies you need to winterize your pressure washer will be 10% OFF!
It’s almost winter time and you need to protect your biggest investment, your pressure washer. This blog will show you step by step instructions on how to winterize your pressure washer.
Winterize your pressure washer
Most people don’t winterize their pressure washer, more precisely their pump. Left over liquid in the pump freezes when temperatures drop, expands, and then causes real damage. So if you want to get the maximum life out of your pump and don’t want to purchase a new pump or pay for pump repair parts, following these instructions to winterize your pressure washer and it could save you time and money.
Whenever storing a pump for extended periods or between use in cold climates you need to winterize your pressure washer, drain all pumped liquids from the pump and flush the liquid-end with an antifreeze solution to prevent freezing and damage to the manifold or pump. Do not pump with frozen liquid in the pump.
Standard Shut Down to winterize your pressure washer
• To begin to winterize your pressure washer, flush pump and chemical injector with fresh water. • Turn off power supply. • Squeeze trigger gun to relieve line pressure. • Disconnect Inlet and Discharge Plumbing.
How System Flush to winterize your pressure washer
• Connect a short 4 foot hose to the pump inlet for units without a float tank and place the other end of the hose in a container with 50% water and 50% antifreeze.• For units WITH a float tank, pour anti-freeze mixture directly into tank to start to winterize your pressure washer.• Start the unit and run until the antifreeze flows out the discharge of the pump.• Allow unit to go into bypass at least one time to circulate anti-freeze (release trigger gun to activate bypass). • Shut the unit off and disconnect the hose from the pump inlet you have now completed the last step to winterize your pressure washer. • Store unit (do not install plugs in the inlet and discharge port). • Cover to protect from severe elements.
Restarting System after you properly winterize your pressure washer • Turn regulator/unloader setting to lowest pressure point. • Check crankcase oillevel and purity. • Reconnect the liquid supply line, discharge line and allow liquid to flow through pump for 2-3 minutes. • Check for leaks at all plumbing connections. • Turn crankshaft by hand initially (this step is only for BELT DRIVE pressure washer pumps). If free moving, start power. • Gradually reset regulator/unloader in small increments to desired system pressure and resume operation. • Follow your established maintenance cycle or the standard Preventative Maintenance Check List in the pump service manual.
In order to help you with your endeavor to winterize your pressure washer and it’s pump we at shopetsonline are offering you 10% off every purchase over $100 from Oct 26th 2011 – Nov 18th 2011!
Just enter the code “winterize” at check out on your order over $100.00 at shopetsonline and the supplies you need to winterize your pressure washer will be 10% OFF!
The GENERAL PUMP TH3020G , 3.0 GPM @ 2000 PSI @ 3600 RPM Features:
Extended-life design for light commercial duty use
Heavy duty die-cast aluminum housing
Integrated flow sensing unloader, to avoid the liability of having a pressurized hose after the engine is shut off
Integrated mounting manifold for efficient power transmission and heat dissipation
Triplex plunger design for smooth operation
Fixed chemical injector
Forged brass manifold
The GENERAL PUMP TH3020G , 3.0 GPM @ 2000 PSI @ 3600 RPM has the following specifications:
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 2000 PSI
Maximum Pump Speed: 3600 RPM
Inlet Pressure 1 – 100 PSI
Bore: .591 in. / 15 mm
Stroke: .254 in / 6.46 mm
Crankcase oil Capacity: 6.75 oz.
Maximum Fluid Temperature: 140 F
Inlet Port Thread: 1/2″ NPT-M
Discharge Port Thread: 3/8″ – 19 BSPP-M
Shaft Diameter 3/4″
Weight: 9.25 lbs
Dimensions: 7.5″ x 7.0″ x 9.0″
GENERAL PUMP TH3020G
List Price: $517.30 Our Price: $398.06 Click for more info. Replacement Pump Comet BXD2528 You save $119.24! Availability:: available for order Product Code: TH3020G ( GENERAL PUMP TH3020G )
GENERAL Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/25/2011
List Price: $565.84 Our Price: $424.06 You save $141.78! Availability:: available for order Product Code: LAN-8.702-383.0 (CAT PUMP 1LX100)
PRICE SUBJECT TO CHANGE. PRICE VALID 10/25/2011
INSTALLATION ON THIS CAT PUMP 1LX100:
Each CAT PUMP 1LX100 comes with oil in the crankcase ready for start-up. CAT PUMPS special premium grade, multi-viscosity crankcase oil should be used. It is recommended to install this pump in a horizontal position with the oil filler cap at the top. It is permissible to rotate the oil filler cap to the right or left, however, some oil spitting may occur. A rubber plug is inserted into the oil filler cap for shipping. This should be removed before operation. Do not operate pump with plug in cap. Flexible hose should be installed at the unloader ports. Connect a hose equal to or one size larger than the inlet port at the bottom of the pump body. Connect a high pressure hose to the regulator discharge port at the side of the regulator. Connect a by-pass hose to the bottom port of the regulator or unloader and run to drain or back to a “T” in the inlet line. CAUTION: Do not over tighten the RTP pump or regulator body.
OPERATION of the CAT PUMP 1LX100:
Once the inlet water supply is turned on and the pump is started, adjust the regulator at the top with an allen wrench or turn adjusting cap on the unloader to set system pressure. Do this in small increments until the desired system operating pressure is reached. The CAT PUMP 1LX100 are axial plunger pumps. Special direct-drive motors are secured to the pump with a V-Clamp Mounting. The optional Drive Mount Assembly is required for the belt drive 1LXB100 model. The motor on the CAT PUMP 1LX100 rotates the offset cam and guide plate which is connected to the three plungers. Each plunger moves forward at a different stage of the cam rotation, providing a smooth, forward, liquid flow through the pump. On the back stroke, the liquid enters the inlet chamber and flows through each inlet valve. As the forward stroke begins, the inlet valve closes. On the forward stroke, the liquid goes through the seat and forces the discharge valve open to allow the liquid out the regulator discharge port.
BE X-2050FW1COM
Electric Pressure Washer Wall Mount 5HP 2000psi Comet Pump
The BE X-2050FW1COM BE pressure washer is an electric power washer that features a reliable 5 HP BALDOR Electric Motor Engine, to go along with a high quality Comet Triplex BWDK2020E Washer pump. The BE X-2050FW1COM BE pressure washer is the ideal wall mounted pressure washer for property and small business owners, construction workers and handymen where electricity is available.
BE X-2050FW1COM Electric Pressure Washer
The BE X-2050FW1COM Electric Pressure Washer Features:
2000psi PSI Max Pressure. 2.0 GPM Max Flow (7.6LPM)
Powered by an industrial 5HP Baldor electric motor with single phase, 220 volts, and 23 amps.
Auto On/Off Feature. Unit starts automatically when trigger is pulled, & shuts down when trigger is released
Includes quick connect coupler, garden hose inlet, and chemical injector.
Durable powder coated steel frame.
Wall Mounted with Hose Reel
Comet Triplex BWDK2020E Pump
(1) BE X-2050FW1COM Wall Mounted Pressure Washer
(1) 50 ft High Pressure Hose
The BE X-2050FW1COM Electric Pressure Washer has the following specifications:
5 HP BALDOR Electric Motor
PSI 2000
GPM 2.0
Comet Triplex BWDK2020E Pump
List Price: $3,478.00 Our Price: $2,558.00 You save $920.00! Availability:: available for order Product Code: X-2050FW1COM
BE X-2050FW1COM Pressure Washer
PRICE SUBJECT TO CHANGE. PRICE VALID 10/25/2011
LANDA MHP Gasoline-Powered, Hot Water Pressure Washer with a Narrow Frame
■ Up to 3.8 GPM, 3500 PSI
■ Heavy-Duty Honda or Vanguard Engines
■ Belt-Drive Landa Pump with 7-Year Warranty
■ Sch. 80 Heating Coil
LANDA MHP Gasoline-Powered, Hot Water Pressure Washer with a Narrow Frame
The LANDA MHP Gasoline-Powered, Hot Water Pressure Washer with a Narrow Frame Features:
■ Optional, Swivel Hose Reel with compact, easywind design for tangle-free handling of hose (hose reel bracket is standard).
■ Extra-durable Heating Coil made of leak-free, coldrolled, Schedule 80 steel pipe with five-year warranty.
■ Helpful Tri-Lingual Labels with operating instructions in English, Spanish and French for operator and owner liability protection.
■ Unique lift-out design allows for easy and quick Coil Access by removing six bolts.
■ 50 ft. of 3/8″, wire braid Landa Tuff-Flex Hose rated for up to 5000 PSI and featuring a 24-inch Hose Guard for burst protection.
■ High-efficiency 12VDC Burner is mounted on the end for ease of servicing and adjustments.
■ Conveniently located Control Panel with burner on/off switch, monitor light and hour meter for maintenance monitoring.
■ Swivel Crimp Fitting for ease in attaching hose to trigger gun.
▲ Rugged High-Pressure Landa Pump, with three ceramic plungers, forged brass head and 7-year warranty, is connected to the engine by a belt-drive assembly that features cast-iron bushing Pulleys and two notched “V” cogged belts, which provide a cooler operation and longer life; also Two-Bolt Adjustment makes it easy to adjust the belt tension.
■ Industrial-duty Gasoline-Powered Honda or Vanguard engine with overhead valves and easy-access oil drain line; all LANDA MHP have keyed Electric Start.
■ Rugged, 11/4-inch square tube Narrow Frame is only 25- inches in width to fit most doorways and is protected by an all-weather resistant epoxy powder coat finish.
■ Metal Side Panels are easy to remove for convenience in servicing.
■ Many Safety Features, including a rupture disk and thermal pump protector to prevent the build up of excessive pressures or heat.
■ Insulated, spring-loaded Trigger Gun with easy-to-attach Detergent Injector and insulated, dual-lance Variable Pressure Wand make it easy to switch between wash and rinse modes.
■ Two rust-free, 5 gal. Fuel Tanks are “see through” for monitoring fuel levels and have elevated fuel lines to prevent debris from damaging the burner (16 HP model only).
■ Four quick-couple Nozzles are made of hardened stainless steel and are mounted for ready access.
■ Optional Wheel Kit adds portability to the self-contained design.
■ Durable polyurethane Battery Box with vibration isolators for a secure ride.
WHY CHOOSE LANDA’s MHP
The MHP is a self-contained, mini-skid, hot water pressure washer with an extra narrow frame for maneuvering through doorways.
QUALITY: While it is considered an economy model, it is still packed with Landa quality, including reliable Honda or Vanguard engines all with electric start, top-of-the-line, belt-drive, tri-plunger Landa Pump with 7-year warranty, Schedule 80 heating coil made of 1/2-inch cold-rolled pipe, and extrarugged steel frame protected by an epoxy powder coat finish. Moreover, the MHP is assembled in a Landa factory that is certified to the internationally recognized ISO-9001:2000 standards for quality manufacturing.
PORTABILITY: The MHP is easily fitted with an optional wheel kit to make it portable for on-site cleaning. No electricity is needed. Simply provide water and it’s ready to clean most anywhere outdoors. The two five-gallon gasoline and diesel tanks (16HP model only) allow for hours of continuous cleaning. The MHP comes standard with the bracket needed to add an optional hose reel for tangle-free washing and additional high-pressure hose protection.
SAFETY: As with all Landa pressure washers, the MHP comes certified to the rigid UL-1776 safety standards, including: 24-inch hose guard for burst protection; thermal pump protector and unloader for protection against build up of pressure or heat in pump bypass water; and rupture disk to vent any build up of excessive pressure in the heating coil.
MHP Specifications
Part No. GPM PSI Engine CCs(HP) Start Pump RPM BTU’s L x W x H SHIP WT.
MHP4-30324E 3.5 3000 Honda 337(11) Electric 1160 330,000 48″ x 21″ x 42″ 555 lbs.
MHP4-35324E 3.8 3500 Honda 389(13) Electric 1185 350,000 48″ x 21″ x 42″ 595 lbs.
MHP4-35224E 3.8 3500 Vanguard 479(16) Electric 1185 350,000 48″ x 21″ x 42″ 560 lbs.
Note: LANDA is constantly improving and updating their products. Consequently, pictures, features, and specifications may differ slightly from current models. Flow rates and pressure ratings may vary due to variances allowed by manufacturers of their machine components. LANDA attempts to keep their machine performance within ±5% of listed specifications.
OPTIONS for the LANDA MHP Gasoline-Powered, Hot Water Pressure Washer:
Part No. Description
8.903-596.0 Float Tank and Inlet Detergent Metering Valve
8.904-514.0 Pivot Hose Reel, 360° swivel (holds 100 ft. of 3/8″ hose)
8.931-276.0 Stainless Steel Top Wrap with Black Bottom Wrap
8.903-530.0 Stainless Steel Outer Coil Wrap
8.904-533.0 Wheel Kit (4 Caster Wheels)
Parts Breakdown
Service Manual
