Jenny Oil Fired Combination Units demonstrate the culmination of advanced engineering, state of the art manufacturing, and extensive steam cleaner and pressure washer experience dating back to its inception in 1927 by Jenny.
These units combine an extensive list of standard features with rugged strength and versatility.
Mi-T-M HSE-1502-0M10 Hot Water 110V Pressure Washer 1500 PSI. Looking for quiet operation? This electric hot water washer is ideal for industrial applications.
GUARANTEED SHIPPED IN 3 DAYS!
HSE-1502-0M10 Mi-T-M Hot Pressure Washer
This Mi-T-M HSE-1502-0M10 Hot Pressure Washer Features:
2 GPM @ 1500 PSI
2 HP / 120V
Totally enclosed fan-cooled electric motor with manual thermal overload protection
Direct drive triplex piston pump with ceramic plungers and forged brass manifold
Thermal relief valve
Stainless steel and brass unloader valve
High pressure detergent injection
Complete system diagnostic board
Solid state electronic ignition
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner.
Float tank
Polyethylene burner fuel tank
Temperature rise 150°F/66°C maximum above ambient, maximum 200 degrees F
Water output temperature is approximately 190° to 200°
Easy coil drain
Powder coated steel gun/wand holder
Solid steel threaded axles
Pneumatic tires with tubes (4)
Locking tire brake
3/8 inch x 50 ft steel wire braided pressure hose with screw connects, swivel and bend restrictors
Professional grade insulated dual lance with 15 degree fixed and detergent nozzles
6502.0005.00 Comet Pressure Washer Pump AXS 1015 E
The Comet Pressure Washer Pump AXS 1015E – 6502.0005.00 Features:
0.9 GPM
1500 PSI
1750 RPM
5/8″ HOLLOW SHAFT
CERAMIC PLUNGERS
FORGED BRASS MANIFOLD
BUILT-IN GARDEN HOSE ADAPTER
STAINLESS STEEL CHECK VALVES
3/4″ FGH INLET – 3/8″ MPT OUTLET
PATENT REGISTERED BALL BEARING DESIGN
MISTING AND HIGH PRESSURE APPLICATIONS
INDUSTRIAL DUTY CONSTRUCTION FOR EXTENDED LIFE
BUILT-IN UNIFLOW UNLOADER AND CHEMICAL INJECTOR
List Price: $555.00 Our Price: $281.33 You save $273.67! Product Code: 6502.0005.00
The techincal specs of the Comet Pressure Washer Pump AXS 1015 E – 6502.0005.00 are:
Maximum Volume 0.9 gpm
Max. Discharge Pressure 1500 psi
Maximum Pump Speed 1750 rpm
Inlet Port Thread 3/4 FGH
Discharge Port Thread 3/8 MPT
Shaft Diameter 5/8 Hollow
Weight 12.0 lbs.
Comet Pumps were introduced into the US market back in 1995 and soon Became the Best Built Pressure Washer Pumps available in most applications. The Comet Pumps are great as a replacement of the original Horizontal pumps found on many pressure Washers using Honda, Briggs & Stratton and other engines that were sold thru catalogs and big box stores like Home Depot and Lowe’s across the country. Comet Pumps have proven to be as reliable as Honda Engines and will usually out last them. Comet Pumps have also proven to be so good that no Lowe’s or Home Depot store brand will use them because they never fail and the manufacturers need to keep selling you there products. The Comet AXD series of Pumps have become the Best Choice as a replacement pump for Brands such as Generac, Coleman Powermate, Excell, Devilbiss, Troy-Bilt, Sears, Craftsman, Honda, Briggs & Stratton and many others. The Comet AXD Pumps have all the features that you would want in a pressure washer pump that will make them Durable, Functional & Reliable.
The RSV4G40D-F40 AR (Annovi Reverberi) Pressure Washer Pump 4 GPM @ 4000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
The AR (Annovi Reverberi) Pressure Washer Pump RSV4G40D-F40 features:
a 1″ hollow shaft with a gas engine flange, operates at 3400 RPM, and has a max PSI of 4000.
Max Flow (GPM): 4.0
Max Flow (L/Min): 15.1
Max Pressure (PSI): 4000
Max Bar: 275
Power EBHP: 11
Bore Dia: 15mm
Stroke: 9.4mm
Crankshaft ID Stamp: 7
Pump Speed (in RPM): 3400
Shaft Diameter: 1″ hollow shaft
Weight (lbs): 14
Special Note: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps.
Features a compact and efficient intergraded unloader valve and fixed chemical injector
Thermal relief valve included at no cost
Forged brass head & valve covers
Ceramic coated stainless steel plungers
Direct drive with 4 bolt gas mounting flange
Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $673.67 Our Price: $421.71 You save $251.96! Availability:: Usually Ships in 24 Hours Product Code: RSV4G40D-F40
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
The CAT Plunger Pump 51G1 with Helical Gearbox, 1″ Shaft, 4.8/3000, 1765/3600 RPM Inclds: 51, 8051 FEATURES
The CAT Pressure Washer Plunger Pump 51G1 has Superior Design with:
•Triplex plunger provides smoother liquid flow.
•Hi-Pressure Seals or V-Packings are completely lubricated and cooled by the liquid being pumped.
•Lubricated Lo-Pressure Seals provide double protection against external leakage.
•Oil bath crankcase assures optimum lubrication.
•Close tolerance concentricity of the ceramic plunger maximizes seal life.
•Optional Gearbox version for direct mounting to gas engine.
The CAT Pressure Washer Plunger Pump 51G1 is built with Quality Materials:
•Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended seal life.
•Forged brass manifold for strength and corrosion resistance.
•Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
•Specially formulated, CAT PUMP exclusive, Hi-Pressure Seals or V-Packings offer unmatched performance and seal life.
•Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
The The CAT Pressure Washer Plunger Pump 51G1 has Easy Maintenance:
•Wet-end is easily serviced without entering crankcase, requiring less time and effort.
•Inlet and discharge valve assemblies interchange for easier maintenance without disturbing piping.
•Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs.
51G1 CAT Pressure Washer Plunger Pump
The CAT Pressure Washer Plunger Pump 51G1 has the following specifications:
Crankcase Capacity……………………………………………………………..25 oz. (0.75 L)
Maximum Liquid Temperature ……………………………………………….160°F (71°C)
For temperatures above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Mi-T-M Hot Pressure Washer HSE1002-0M11 110V Pressure Washer 1000 PSI. Looking for quiet operation? This electric hot water washer is ideal for industrial applications.
The Mi-T-M Hot Pressure Washer HSE1002-0M11 Features:
2 GPM @ 1000 PSI
1.5 HP / 120V
Totally enclosed fan-cooled electric motor with manual thermal overload protection
Direct drive triplex piston pump with ceramic plungers and forged brass manifold
Thermal relief valve
Stainless steel and brass unloader valve
Low pressure detergent injection
Complete system diagnostic board
Solid state electronic ignition
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner.
Polyethylene burner fuel tank
Temperature rise 150°F/66°C maximum above ambient, maximum 200 degrees F
Water output temperature is approximately 190° to 200°
Easy coil drain
Powder coated steel gun/wand holder
Solid steel threaded axles
Pneumatic tires with tubes (4)
Locking tire brake
3/8 inch x 50 ft steel wire braided pressure hose with screw connects, swivel and bend restrictors
Professional grade insulated dual lance with 15 degree fixed and detergent nozzles
One (1) year limited parts and labor warranty.
Three (3) year limited warranty on coil.
Five (5) year limited warranty on pump.
HSE1002-0M11 Mi-T-M Hot Pressure Washer
The Mi-T-M Hot Pressure Washer HSE1002-oM11 has the following specifications:
The HH Series Pressure Washer Steamer combines the cleaning power of high pressure with the grease cutting effectiveness of hot water, steam and soap. This stainless steel and powder coated machine offers foam filled wheel kit. The soap feature includes downstream injection and a massive 8 gallon soap reservoir tank. It requires 110 VAC / 15amp power supply and includes a 35′ GFCI cord for operator safety. Water output up to 250F with 8 gallon all day diesel tank. Includes gun, wand, 50′ hose, quick connect nozzles, adjustable thermostat, pressure relief valve, burst disc and 1.5 HP / 1750 RPM motor and pump.
Other Specs:
1500 PSI, 1.5 GPM
Low RPM, Quiet 1.5 HP Motor, 115V
Comet pump, 1750RPM (1 year warranty)
Diesel Fired Burner
Adjustable Pressure Regulator
35′ GFCI Cord for Operator Safety, Plug into any 15A outlet, plug included
Rugged Red Powder Coated Steel Frame
Super Efficient Schedule 80 coil w/ Insulation wrapped Combustion Chamber
Stainless Steel Coil Wrap
8 Gallon rust-free Poly Diesel Fuel Tank w/ Fuel Filter
Hot/Steam Water Output up to 250° F
Reliable Becket Burner
High Limit Over Temp Protection
Safety Pressure Relief Valve & Burst disc
Thermo-sensor (prevents over heating in bypass mode)
Downstream Chemical Injector
8 Gallon rust-free poly Soap Reservoir Tank
Gun and Wand Assembly with Insulated Grip and Quick Connects
50′ High Pressure Hose
Four 10″ Foam Filled Tires
Weight: 265 lbs
Adjustable Thermostat
3 – Color-coded Quick Connect HP Spray Nozzles, and 1 Color-coded Chemical Nozzle
Dimensions: 48″L x 23″W x 45″H
Assembled and tested in the USA
Our Price: $1,999.00 Availability:: Usually Ships in 24 to 72 Hours Product Code: HH15015E1
