Tag: Pressure Washers

Posted on

GIANT PUMP GXRH 2224

GIANT PUMP GXRH 2224

Horizontal/Vertical Pump with built-in Regulator, Thermal Relief Valve and Siphon Injector.

Specifications

Model GXR Series

GXR2224………………………………………………………………………………….2.2 GPM @ 2400 PSI

Maximum Inlet Pressure……………………………………………………………..Up to 90 PSIG1

RPM…………………………………………………………………………………………3450

Plunger Diameter ……………………………………………………………………….16mm

Stroke GXR2224 ……………………………………………………………………….4.7mm (6.1 o angle)

Crankcase Oil Capacity ………………………………………………………………4.7 fl. oz. (4.1 fl.oz. horizontal)

Temperature of Pumped Fluids ……………………………………………………Up to 80 oF

Inlet Port …………………………………………………………………………………..1/2″ NPT

Discharge Ports ………………………………………………………………………….3/8″ NPT

Shaft Rotation ……………………………………………………………………………Either Direction2

Weight………………………………………………………………………………………9 lbs.

Width ……………………………………………………………………………………….8.325″

Height ………………………………………………………………………………………6.45″

Swash Plate Bore (Horizontal) …………………………………………………….3/4″ x 3/16″ Keyway

Swash Plate Bore (Vertical) …………………………………………………………7/8″ x 3/16″ Keyway

Valve Type ………………………………………………………………………………..Polyamide Plastic

1 A 25 PSIG minimum inlet pressure is required.

2 The pump itself can be driven in either direction of rotation; however, the cooling fan

on TEFC motors must always be positioned so that the cooling air is drawn from the

non-drive end of the motor towards the pump.

CLICK HERE FOR GXR PUMP BREAKDOWN

List Price: $260.00

Our Price: $200.07

You save $59.93!

CLICK HERE TO PURCHASE THE GXR GIANT PUMP

Posted on

RMW2G24 AR (Annovi Reverberi) Pump

RMW2G24 AR (Annovi Reverberi) Pump

RMW2G24 Vertical Shaft AR (Annovi Reverberi) Replacement Pump!

Inlet & Outlet come out in the FRONT of the engine (spark plug end)

RMW2G24 Specifications for AR (Annovi Reverberi) Replacement Pump:

* 2400 PSI MAX

* 2.0 GPM

* 7/8″ Shaft

* Oil Lubricated

* Adjustable PSI

* Chemical Injector

* Thermal Relief Valve Included ! !

* Hose connection is 22mm x 14mm (will not fit 15mm pressure hoses)

* Pump Shaft Key included

NOTE:

Depending on your Pressure Washer model, you may need to get three new mounting bolts to mount theRMW2G24 AR (Annovi Reverberi) Pump to the engine.

Below are the most common bolt sizes needed to mount your new replacement pump to the engine:

– 5/16″ 18 x 2 1/2″ (Qty. 2)

– 5/16″ 18 x 3 1/2″ (Qty. 1)

Most pumps are only designed to last for approximately 50 hours of use. This RMW2G24 AR (Annovi Reverberi) Pump is designed to last for 300 + hours of use.

List Price: $243.26

Our Price: $156.74 RMW2G24 AR (Annovi Reverberi) Pump

You save $86.52!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

Direct-Drive Misting Plunger CAT Pumps

Direct-Drive Misting Plunger CAT Pumps

CAT Pump 2DX05ELS.MIST

CAT Pump 2DX15ES.MIST

CAT Pump 2DX20ES.MIST

CAT Pump 2DX27ES.MIST

CAT Pump 2DX30ES.MIST

CAT PUMP PDF Breakdown for Direct Drive Misting Plunger Pumps Click here.

Service Manual PDF for Direct Drive Misting Plunger CAT Pumps Click here.

FEATURES:

Triplex plunger design provides a smooth liquid flow.

Specially formulated Hi-Pressure Seals and concentrically

ground ceramic plungers assure maximum seal life.

Stacked Stainless steel valve design for long life and

easy servicing.

Ultimate compact, direct-drive unit for maximum portability.

Standard Integral Regulator with built-in by-pass

assures system pressure control and pump protection.

COMMON CAT PUMP SPECIFICATIONS

Inlet Pressure Range ………………………..Flooded to 60 PSI (Flooded to 4 Bar)

Bore ………………………………………………………………..0.630″ (16 mm)

Max. Liquid Temperature ……………………………………140°F (60°C)

Crankcase Capacity………………………………………….8.5 oz. (0.25 L)

Inlet Ports (1) ……………………………………………..3/8″ NPTF (3/8″ NPTF)

Discharge Port (1) ………………………………………3/8″ NPTM (3/8″ NPTM)

Shaft Diameter……………………………………………………..5/8″ (15.8 mm)

Weight ………………………………………………………….10.7 lbs. (4.9 kg)

Dimensions ……………………………………..7.75 x 7.12 x 6.29″ (197 x 180 x 160 mm)

NOTE: 3450 RPM models with 1725 RPM motor deliver half original flow.

SPECIFICATIONS

U.S. Metric U.S. Metric

Measure Measure Measure Measure
CAT Pump MODEL 2DX05ELS.MIST 2DX15ES.MIST

Flow …………………………. 0.5 GPM (1.89 L/M) 1.5 GPM (5.7 L/M)

Max. Discharge Pressure 2000 PSI (140 BAR) 2000 PSI (140 BAR)

Max. RPM…………………. 1725 RPM (1725 RPM) 3450 RPM (3450 RPM)

Stroke ………………………. 0.078″ (2.0 mm) 0.118″ (3.0 mm)
CAT Pump MODEL 2DX20ES.MIST 2DX27ES.MIST

Flow …………………………. 2.0 GPM (7.6 L/M) 2.7 GPM (10.2 L/M)

Max. Discharge Pressure 2000 PSI (140 BAR) 2000 PSI (140 BAR)

Max. RPM…………………. 3450 RPM (3450 RPM) 3450 RPM (3450 RPM)

Stroke ………………………. 0.157″ (4.0 mm) 0.220″ (5.6 mm)
CAT Pump MODEL 2DX30ES.MIST

Flow …………………………. 3.0 GPM (11.4 L/M)

Max. Discharge Pressure 1500 PSI (105 BAR)

Max. RPM…………………. 3450 RPM (3450 RPM)

Stroke ………………………. 0.244″ (6.2 mm)

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

General Pump MK – Series Industrial Pumps

General Pump MK – Series Industrial Pumps

Check out shopetsonline for all your industrial pump needs. Forget the big box stores like home depot and lowes for these high end pumps.

A purchase like this should be entrusted to a company that has been in the industrial cleaning supply business since 1970!

Click here for MK Series industrial pumps from shopetsonline.com

Click for the MK Series Industrial Pumps from General Pumps!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

General Pump, T Series 47 – TS1011

GENERAL PUMP,T SERIES 47 TS1011

  • The preferred pump frame in the cleaning industry
  • Forged brass manifold with an exdlusive lifetime warranty
  • Large capacity, die cast, anodized aluminum oil bath crankcase
  • Over sized connecting rods for maximum life
  • Heavy duty tapered roller bearing
  • Solid ceramic plungers with continuously lubricating packings
  • Unitized stainless steel inlet and discharge valves
  • Available in left handed “L” version
  • Triplex Plunger Pump
  • Maximum Volume: 4.0/4.75 GPM
  • Maximum Discharge Pressure: 2000/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1450/1750 RPM
  • Minimum Horsepower Requirements: 5.5 bhp (8.2 hp for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .472″ (12mm)
  • Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 11.4″ x 9.2″ x 6.9″
  • Weight: 30 lb.
  • Lubrication: Fill the crankcase to the dot on the oil gauge window pe specifications with SAE 30W oil. Change the oil after a 40 hour break in period, then every three (3) months or 500 hour intervals thereafter.

Need parts for this pump? Click here for the datasheet.

List Price: $717.08

Our Price: $551.79

You save $165.29!

CLICK TO PURCHASE HERE…

 

Posted on

General Pump – T Series 50, T991

T991 GENERAL PUMP,T SERIES 50

 

Features

  • Triplex Plunger Pump
  • Maximum Volume: 4.0/3.5 GPM
  • Maximum Discharge Pressure: 1100/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1750/1450 RPM
  • Minimum Horsepower Requirements: 3.6 bhp (multiply by 1.5 for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .394″ (10mm)
  • Crankcase Capacity: 15.2 oz. (nondetergent SAE 30W oil)
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port Thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 9.3″ x 8.3″ x 5.4″
  • Weight: 18.7 lb.
  • Forged brass manifold with an exclusive lifetime warranty
  • Die cast, anodized aluminum oil bath crankcase
  • Solid ceramic plungers with continuously lubricated packings
  • The original InterPump unitized stainless steel Kit 1 inlet and outlet valves
  • Standard 24mm soid shaft for pulley mounting
  • Flex coupling and bell housing available for direct drive
  • Ideal for all general cleaning/washing applications
  • Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter
  • The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
  • General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, Gernal Pump/US warrants allforged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
  • In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
  • The following items are NOT warranted, due to matters beyond General Pump/US control.
  • Normal wear and tear to parts that are considered standard wear parts.
  • Defects caused by the fault or negligence of the buyer or third party.
  • Use of unauthorized repair parts, or;
  • modifications made by the customer.

List Price: $585.02

Our Price: $450.17

You save $134.85!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

HYPRO Car Wash Plunger Pump 2535s

HYPRO CAR WASH PLUNGER PUMP

The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.

  • 38GPM
  • 1200 Max PSI
  • 800 Max RPM
  • oil bath crankcase
  • ceramic plungers
  • 35mm OD solid shaft
  • 1 1/2″ NPT inlet port
  • 1″ NPT outlet port

List Price: $6,424.00

Our Price: $4,108.03

You save $2,315.97!

CLICK HERE TO PURCHASE

Posted on

AR (annovi reverberi)XW-M26.20 6.87 GPM @ 2900 PSI Pump

AR (annovi reverberi)XW-M26.20 6.87 GPM @ 2900 PSI Pump

AR (annovi reverberi) XW Series Pumps – Plunger Pumps are designed for high-pressure industrial washing applications. The AR (annovi reverberi) XW Series Pumps are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components of AR (annovi reverberi) XW Series Pumps include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. AR (annovi reverberi) XW Series Pumps valve cages of special designed Ultra-Form provide positive seating and extended life. AR (annovi reverberi) XW Series Pumps two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These AR (annovi reverberi) XW Series Pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft. Flows: 3.96 to 13 GPM Pressure to: 4350 PSI Speeds: 500, 1000, 1450, 1750 rpm Shaft Styles: Solid Shaft 24mm

List Price: $1,019.94

Our Price: $627.88

You save $392.06!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

CAT Pump 2DX15ES.MIST Plunger

CAT Pump 2DX15ES.MIST Plunger

List Price: $649.00

Our Price: $388.99

You save $260.01!

CAT Pump 2DX15ES.MIST Plunger Features:

  • Triplex plunger design provides a smooth liquid flow.
  • Specially formulated Hi-Pressure Seals and concentrically
  • ground ceramic plungers assure maximum seal life.
  • Stacked Stainless steel valve design for long life and
  • easy servicing.
  • Ultimate compact, direct-drive unit for maximum portability.
  • Standard Integral Regulator with built-in by-pass
  • assures system pressure control and pump protection.

CAT Pump 2DX15ES.MIST Plunger Specs:

  • Inlet Pressure Range ………………………..Flooded to 60 PSI (Flooded to 4 Bar)
  • Bore ………………………………………………………………..0.630″ (16 mm)
  • Max. Liquid Temperature ……………………………………140°F (60°C)
  • Crankcase Capacity………………………………………….8.5 oz. (0.25 L)
  • Inlet Ports (1) ……………………………………………..3/8″ NPTF (3/8″ NPTF)
  • Discharge Port (1) ………………………………………3/8″ NPTM (3/8″ NPTM)
  • Shaft Diameter……………………………………………………..5/8″ (15.8 mm)
  • Weight ………………………………………………………….10.7 lbs. (4.9 kg)
  • Dimensions ……………………………………..7.75 x 7.12 x 6.29″ (197 x 180 x 160 mm)
  • NOTE: 3450 RPM models with 1725 RPM motor deliver half original flow.

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
Posted on

CAT Pump 2SF22EL

CAT PUMP 2SF22EL Plunger Pump

CAT PUMP 2SF22EL Plunger, 2.2/2000, 1725 RPM, Elec 5/8″ shaft, w/Unloader, BB/S-Valves.

  • 2.2 GPM
  • 2000 PSI
  • 1725 RPM
  • OIL CAPACITY 11.83 OZ
  • REGULATING UNLOADER
  • 5/8″ HOLLOW SHAFT ELECTRIC WITH BOLT MOUNT
  • CAT PUMP 2SF22EL FEATURES• Ultimate portability – less than 11 pounds – less than 10” long.

    • Unique spring loaded inlet valves and the flow through ceramic plungers provides a smooth, steady flow.

    • Optional 3450 or 1725 RPM models for gas or eletric drive.

    • Regulating Unloader is standard on each pump to assuresystem pressure control and pump protection.

    • Special HT and FPM seals and FPM or EPDM O-Rings for liquid compatibility.

  • COMMON CAT PUMP 2SF22EL SPECIFICATIONSInlet Pressure Range..(Standard) Flooded to 75 psi (Flooded to 5.25 bar)

    ………………………………(Hi-Temp) 30 to 75 psi (2.1 to 5.25 bar)

    Bore……………………………………… 0.708” (18 mm)

    Max. Liquid Temperature.(Standard) 160°F (71°C)

    ………………………………(Hi-Temp) 190°F (88°C)

    Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.

    Crankcase Capacity……………….. 11.83 oz. (.35 l)

    Inlet Ports (1)…………………………. 3/8” NPTF (3/8” NPTF)

    Discharge Ports (2)…………………. 3/8” NPTF (3/8” NPTF)

    By-Pass Ports (1)…………………… 1/4” NPTF (1/4” NPTF)

    Weight (Pump Only)……………….. 10.6 lbs. (4.8 kg)

    Dimensions (Pump Only)…………. 9.13 x 6.65 x 6.50” (232 x 169 x 165mm)

CAT Pump 2sf22EL Pump Breakdown CLICK HERE

Service Manual for CAT Pump 2sf22EL Click Here

List Price: $644.66

Our Price: $496.07 CLICK HERE TO PURCHASE