Do you need to repair an Annovi Reverberi XMV pump? We have put together some of the most common XMV Pump Repair Kits into special bundles for your machine. There are three of these special bundles for this pump from AR. The first bundle contains the water seal AR2741, ring support AR2740 and valve kit AR1864 for your XMV pump. The second repair bundle contains everything from the first set plus we have added the AR2544 piston kit, and the third bundle contains everything from the first two and we have added the AR2787 oil seal kit for your XMV pump. We did this, with advice from our AR Pump repair specialists, as to which kits were most commonly ordered together and which repairs were recommended at the same time from Annovi Reverberi.
XMV Pump Repair Bundle Kit 1
But, we didn’t stop there to help you out with your XMV Pump Repair. In these bundles we have also added a 16 oz. bottle of Annovi Reverberi Oil for your pump, as it’s recommended to change the oil on these units when replacing any of these parts with repair kits. On top of the oil, we are also including totally free of charge a one gallon jug of our #1 Cleaning Detergent, Photo Finish™. That is a $14.38 savings. Think we were done for these bundle? Nope, we also are including a “Cash Flow” coupon, which is good for $10.00 off your next order at Shopetsonline.com over $100.00. So now you are saving over $24.00 by purchasing this XMV Pump Repair Kit Bundle.
XMV Pump Repair Bundle Kit 2
But wait, that is not all we are also including in this item a decal that you can affix to your pump or machine, that not only has our toll free number on it for you or your workers to call if you’re in the field and need help, but it also has a QR code that leads you to our online ETS APP for your smart phone or tablet. But the best part about this decal is it has a forever coupon code on it, meaning if you have the decal attached to your machine it will remind you to order all your pressure washer items from shopetsonline.com and gives you a special discount code that you can enter on every future purchase over $50.00.
XMV Pump Repair Bundle Kit 3
Click here for the parts breakdown of the XMV Pump to see where all of these kits work on your pump. Then depending on which repairs you need to do, order one of the kits below. Remember each kit has all the same “freebies” , all that changes, is we add one additional repair kit incase you need more than the basic. Not sure which kit to order please give us a call toll free at: 1-877-824-7763 {Smart Phones Click to Call}
Or you can order any one of these XMV Pump Repair Bundle Kits by clicking the links below.
The RCV3G25D-F7 is the replacement unit for your gasoline powered 3400 RPM pressure washer. This RCV3G25D-F7 is rated 3 gallons per minute and has a maximum PSI of 2500. This is another one of them units from AR pumps that can be identified in numerous ways, such as the RCV3G25D-F, RCV3G25D, RCV3G25, RCV3G, RCV3, or simply the RCV 3G25. No matter how you see it identified, you can rest assured that Annovi Reverberi put the same thought and precision in building this unit for your pressure washer that it does all of its pumps. Like most AR pumps it has a very solidly forged brass head to go along with a die cast body and solid crankcase for the oil. The internal plungers on this item are made from solid ceramic and go along with the anodized cooling system and other steel and rubber elements of the pump to ensure a very long working life not only for the RCV pump but for your pressure washer as well.
RCV3G25D-F7 Pump from Annovi Reverberi
The features or specification on this RCV3G25D-F7 Pump from Annovi Reverberi:
3.0 gallons per minute for those that use metric is 11.4 liters per minute.
2500 PSI is the same as 170 BAR for the metric users of this pump.
An EBHP power rating of 5.1 is standard for this type of unit.
15mm bore and 6.5mm stroke dimensions are industry standards for pressure washer pumps.
The RCV pump weighs in at only 11 pounds.
A 140° degree maximum liquid pumping temperature gives you flexibility to clean almost anything.
9.81oz is the oil capacity of the crankcase.
A 1/2”F measurement on the inlet thread is standard.
The discharge thread measures 3/8”F, which is also standard in the industry.
Exploded Parts Breakdown for the RCV3G25 / RCV3G25D-F7 AR pump.
Need to repair your already owned RCV3G25 / RCV3G25D-F7 AR pump? Take a look at the manual for parts and kits and then give us a call or order them online from us. We stand by every pump we sell, and will help to the best of our ability to get you back up and running as fast as possible. It pays to order from a company that cares about its customers. 1-877-824-7763
Order this pump brand new from our online store by clicking the link below:
The XTV2G15DBA-F7 can go by many names, such as the XTV2G15DBA-F, XTV2G15DBA, XTV2G15, XTV2G, or simply the XTV2. Either way it’s identified, be sure it’s still a 2.11 gallon per minute at 1500 PSI horizontal replacement pump for your pressure washer. This unit will mount to gas or electric motors that require 3400 RPM. This pump, like all AR pumps are built to last you years. Don’t be fooled by the other names this unit may be private labeled for like Dayton and others, they are all Annovi Reverberi pumps made from the best brass, metal, plastic and rubber that can be had for their production. We at ETS stand behind all our AR Pumps and will help you keep them in top running shape for the life of the pump.
XTV2G15DBA-F7 pump from Annovi Reverberi
More specific features you need to know about this XTV2G15DBA-F7 pump from Annovi Reverberi:
The gallons per minute of 2.11 is equal to 4 liters per minute.
A maximum PSI of 1500 is the same as 103 BAR pressure.
This pump has an EBHP power rating of .2.
A 15mm bore and a 4.8mm stroke are industry standard for this style of pump.
Unit has solid ceramic plungers and stainless steel valves.
The unit weighs in at just under 10 pounds.
140° is the maximum pumping liquid temperature of this unit.
Exploded Parts Breakdown of the XTV2G15DBA-F7 / XTV2G15 AR Pump
Ready to order this replacement pump for your pressure washer? Click the link below, but if you’re not sure if this is the correct unit for your machine we are here to help you. Give us a call to let us help you figure out the correct fix for your pressure washer pump. 1-877-824-7763
The XMV3.5G25D-F24 is a 3.5 gallon per minute pump with a 2500 PSI maximum. The XMV3.5G25D-F24 has been also called the XMV3.5G25D, XMV3.5G25, XMV3.5G, XMV3.5, XMV35G25D-F24, XMV35G25D, XMV35G25, XMV35G, or even just the XMV35, but however you have seen it written, it’s the same great pump from Annovi Reverberi that spins at 3400 RPM and is built to last you a life time. The head is of forged brass with a body and crank case made from a special die casting process. Even the internal workings on this unit are made from the finest materials, from the rubber in the seals and o-rings up to the ceramic plungers and stainless steel valves and seats. This replacement pump will stand up to anything you throw at it.
XMV3.5G25D-F24 Pump from Annovi Reverberi
Happen to own one of these XMV3.5G25D-F24 or XMV3.5G25 Pumps from AR Pumps already, and need some repair kits or parts, but don’t have your manual that came with the pump? You can download the parts breakdown by clicking here, and using it to determine the items you will need to fix up this unit and get you and your business back on the road and working.
Exploded Parts Breakdown for the XMV3.5G25D-F24 AR Pump
More features you may like to know about your XMV3.5G25D-F24 Pump.
The flow rate of 3.5 gallons per minute is the same as 13.2 liters per minute.
A 2500 maximum PSI is equal to 170 BAR pressure.
The EBHP power rating of 5.5 is industry leading.
A 15mm Bore and 8.2mm Stroke are industry standards for this type of pump.
This XMV3.5G25 pump weighs in at only 16 pounds.
The maximum temperature of the pump is 140°, but high temperature kits are available to 180º F. (Contact Us)
The crankcase oil capacity is 14.6oz.
The inlet thread measures 1/2”F.
An outlet thread with a measurement of 3/8”F is standard.
If you are ready to order this pump for your pressure washer you can do so by clicking the link below. Should you need more help determining if this is the correct item for you please give us a call and we will be happy to help you out. 1-877-824-7763 {Smart Phones Click to Call} As always you have piece of mind when you order from us as we stand behind every pump part or kit we sell.
This 2SFX30GZ pump from CAT Pumps is for the pressure washer that requires a 3 gallon per minute flow rate with a 2500 maximum PSI. The 2SFX30GZ is a direct drive replacement pump that spins at 3450 RPM. This pump will mount to either a gasoline or electric motorized engine with the correct mounting kit available from CAT. The unit comes with its 7625 unloader and by pass hose already installed on the unit, making this truly a bolt and go style of pump. The brass head, strudy body and all of the stainless steel and state of the art rubber internal elements of this pump have been tested and re-tested to guarantee the longevity of this replacement unit for your pressure washer.
2SFX30GZ Pump from CAT Pumps
Some more features you should know about the 2SFX30GZ Pump from CAT Pumps:
The 3 gallon per minute flow rate is equal to 11.4 L/M.
A 2500 PSI is the same as 175 BAR.
The stroke is a standard 0.189″ or 4.8 mm.
There is an optional electric 3/4″ shaft which is the 2SFX30GES.
The inlet pressure flooded is a maximum 75 PSI that is 5.25 BAR.
The pumps bore is a standard 0.708″ or 18 mm.
The maximum pumping liquid temperature is 160°F or 71°C.
For cleaning situations above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Oil capacity on the crankcase is 11.83 oz. or .35 L.
One inlet port that measures 3/8″ NPTF.
Two outlet ports that measure 3/8″ NPTF.
The pumps by pass port is a 1/4″ NPTF.
Weighs in at only 11.83 lbs. or 4.8 kg.
The dimensions of the 2SFX30GZ are 9.13 x 6.65 x 6.50″ or 232 x169 x165mm.
Exploded Parts Breakdown of the 2SFX30GZ Pump from CAT Pumps
Still not sure if this 2500 PSI @ 3 GPM pump is right for your pressure washer? Give us a quick call and we will be happy to help you determine the correct pump for your machine. 1-877-824-7763 {Smart Phones Click to Call}
You can also order this unit online directly from our store by clicking the link below. We stand by all our sales and will help you with all your questions if you purchase this pump through us.
The RMV2.4G30D-EZ is a horizontal replacement pump for gas powered pressure washers. This RMV2.4G30D-EZ is rated for units that require 2.4 gallons per minute with a maximum PSI of 3000. It is a standard 3400 RPM pump that can also be seen written as RMV2.4G30D, RMV2.4G30, RMV2.4G, RMV2.4, RMV24G30D-EZ, RMV24G30D, RMV24G30, RMV24G, or the RMV24. This item, no matter how it’s identified, is one of the best replacement pumps you can buy today if your machine needs a new one. Everything on this unit is built to last, from the forged brass head and die cast body, down to the smallest internal o-rings and stainless steel valves. Annovi Reverberi has spent the time and effort selecting the best materials for this pump so it will continue to work with you even in the harshest of cleaning environments.
Exploded view of part on the RMV2.4G30D-EZ Annovi Reverberi Pump
A few more features of this RMV2.4G30D-EZ Pump if you need to purchase a new one:
The 9.1 liters per minute equals 2.4 gallons per minute.
3000 PSI is a BAR rating of 200.
3.4 EBHP maximum power rating is industry leading.
Has standard bore and stroke diameters of 12 mm and 8.3 mm.
Weighs in at only 7.5 pounds.
A 140° maximum pumping liquid temperature.
The oil capacity of the crankcase is 2.2oz.
The inlet thread is standard 3/4”.
The outlet thread is a garden hose type 22mm.
Need any more information on this pump before you buy it or try to repair it? Give us a call at 1-877-824-7763 {Smart Phones Click to Call} and we will be happy to assist you.
You can also order the pump and it’s repair parts and kits on our online store by clicking the link below.
The RKV4G37D-F24 is a 4 gallon per minute replacement pump with a maximum PSI of 3700. This RKV4G37D-F24 pump spins at 3400 RPM and is made to work on a gas or electric engine. This pump has been known to be identified in the following ways as well, RKV4G37D-F, RKV4G37D, RKV4G37, RKV4G or just simply RKV4. Anyway it is identified, you should know that it is the same pump, built with the same attention to detail that all AR Pumps get. From the smallest parts like the stainless steel valves, caps and plunger rods on up to the state of the art ceramic plungers and then on to the forged brass head and die cast body, this unit is built to stand up to anything cleaning situation you can put it in. Add to all this the ability to pump liquids up to 140° F. and you have a pump that will be your work horse for years to come.
RKV4G37D-F24 or RKV4G37 Parts Breakdown Exploded View from AR Pumps
Other specification you may need to know about the RKV4G37D-F24 or RKV4G37:
The 4 gallons per minute flow rate is equal to 15.1 liters per minute.
The 3700 PSI is the same as 255 BAR.
An EBHP power rating of 7.5 is industry standard.
Bore and stroke diameters of 15 mm and 7 mm are also industry standards
Weighs in at only 21 pounds.
The maximum oil capacity of the crankcase is 15oz.
Has an inlet thread of 1/2”F and an outlet thread of 3/8”F.
Whether you are looking to repair or replace your RKV4G37D-F24 pump we can help you, call one of our Annovi Reverberi pump specialist toll free and they will be able to assist you with all your questions.
The XTV3G22E-F8 pump is rated for pressure washers that require 3 GPM at a 2200 maximum PSI. This XTV3G22E-F8 can also be identified like the following: XTV3G22E, XTV3G22, XTV3G, XTV3, or even simply an XTV pump. This great pump can also be used in place of the Hypro Pump 2269B-A, if you’re looking to fix a machine that currently has that unit on it. The pump spins at a maximum RPM of 3400, however it’s worth pointing out that if you run at a higher or lower RPM this will effect your maximum oil capacity of the crankcase. Should you run the pump under 1750 RPM you only will have an oil capacity of 8 oz. Conversely if you run the unit over 1750 RPM you will see the full 10 oz. capacity of the units crankcase. However you run it, be at ease as this pump is built with longevity in mind. Everything from the head, body and crankcase down to the connection rods, pins, valves and even seals are made from the best materials, tested and retested to be sure they will hold up to almost any pressure situation you can put the pump in.
XTV3G22E-F8 pump from Annovi Reverberi
Features you may also like to know about this XTV3G22E-F8 Pump:
This unit is a triplex plunger style of pump.
The pump is a direct drive unit with a NEMA 56C electric flange
Has a hollow shaft diameter of 5/8” for mounting.
4.5 BHP is the maximum horse power rating.
A 160 degrees F. temperature is the maximum fluid temp. that can be run through the pump.
Two inlet ports measuring 1/2″ BSP.
Has two outlet ports that also measure 3/8″ BSP.
Standard right handed drive side.
Has forged brass head and valve covers as well as solid ceramic plungers.
Parts breakdown for the XTV3G22 or XTV3G22E-F8 AR pump
You can order the pump online below, or if you are unsure if this will work for your machine, you can give us a call and we will be happy to assist you in your decision making on this pump purchase. 1-877-824-7763 {Smart Phones Click to Call}
The RCA3.5G25N which can also be see with a designation of RCA3.5G25, RCA3.5G, RCA3.5, RCA pump, RCA35G25N, RCA35G25, RCA35G, or RCA35 is a 3.5 GPM at 2500 PSI Pump. This unit has a maximum RPM of 1750 and is made to be a replacement pump on most of the pressure washers on the market today that require these specifications. The RCA3.5G25N is built with longevity in mind, from its forged brass head and die cast body, down to its anodized cooling fans blades and solid ceramic plungers, everything that goes into constructing this pump is of the finest quality.
RCA3.5G25N pump from Annovi Reverberi
Need to repair an already owned RCA3.5G25N pump? We have you covered for that too, just print off the parts breakdown located here, and give us a call for all the parts and kits you will need to get your pump back up and running.
Exploded view of RCA3.5G25N Pump from AR Pumps.
Here are a few more specifications you may also need to know before purchasing a new RCA3.5G25N Pump:
The maximum gallons per minute is 3.5, which i s also 13.2 liters per minute.
2500 is the maximum PSI which is a BAR of 170.
The EBHP power rating on this unit is 6.0.
A bore diameter of 18 mm with a stroke of 10 mm.
Weighs in at only 10 pounds.
140° maximum pumping liquid temperature.
The oil capacity of the crankcase is 9.81oz.
One inlet thread measuring 1/2”F.
A discharge thread that measures 3/8”F.
As always, if your not sure what pump is your ideal replacement unit for your pressure washer, give one of our knowledgeable pump specialists a call, and they will be happy to assist you with your choices. 1-877-824-7763 {Smart Phones Click to Call}
However, if you know this RCA3.5G25N pump is a perfect match for your machine order it online below for the fastest service.
This XMV3G25D-F25 pump is a very common replacement for pressure washers that need 3 gallons per minute at 2500 PSI. The XMV3G25D-F25 spins at a pump standard of 3400 RPM, and is built to mount to almost any type of pressure washer configuration there is out there. It will mount to either a gasoline or electric type motor, and it will work with coupling or belt drive systems as well as gearboxes. This items can be classified with other identifications such as the XMV3G25D-F, XMV3G25D, XMV3G25, XMV3G, XMV3, or just an XMV pump. However you see it, rest assured it will last you and your pressure washer a lifetime. This unit is constructed of the finest brass, metal and aluminum parts inside and out to give you years of worry free pressure cleaning. Even the internal o-rings and seals are made from the best rubber and plastic that Annovi Reverberi could acquire, to help in the longevity of these hard working parts of this pump.
XMV3G25D-F25 pump from Annovi Reverberi
Here are a few more bits of information you may need about the XMV3G25D-F25 Pump:
The 3 gallons per minute on this unit is 11.4 liters per minute in metric.
A 2500 PSI rating is equivalent to 170 BAR.
The power rating on this item is an EBHP rating of 5.
This XMV3G25D-F25 has a bore of 5 mm and a stroke of 7.6mm.
Still having trouble determining if this is the best pump for your machine? Please give us a call and we will be happy to assist you with any questions you have about this pump.
