Tag: pumps

Posted on

AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N

Spotlight on the AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N.

AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N
AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N

XWLA-SS12G22N AR (Annovi Reverberi) Pump 12 GPM @ 2200 PSI.

In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XWLA-SS12G22N pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XWLA-SS12G22N feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack.

The AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N Features:

  • Manifold:
  • – 316L – Stainless Steel Block Style: Strength and no porosity = long life.
  • – Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
  • – Offset Discharge Ports: High efficiency, smooth flow
  • – Bolts: 8 Bolts, 10mm, stainless steel.
  • Valves:
  • – Ultra Form Cages: Durable, strength, and long life.
  • – Poppets, Seat and Spring: 316 series stainless steel.
  • – Valve Caps: Machined 316L series stainless steel.
  • Packing and Plungers:
  • – High Pressure Packing: “Special profile” style (W-1) Viton (cotton duct weave base) strong and tightens under load.
  • – Low Pressure Seals: “W-2” style Viton, good positive seal.
  • – Support and Guides: Machined stainless steel, 1-piece construction with intermediate and guide rings to assure proper plunger alignment, maximize packing and seal life.
  • – Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable. Ultra thick with a locating step and SST retaining bolts.
  • Bearings: Premium over sized taper for maximum life and load disbursement.
  • Bearings Supports: Precision die-cast and machined to assure concentricity and alignment.
  • Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
  • Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” orginal. Oil drain plug.
  • Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system.
  • Special acorn style retaining nuts and SST slingers.
  • Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
  • Connection Rods: 2-piece special alloy bronze for higher pressures, oversized for maximum strength, load disbursement, and life. Heavy pin area construction.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 24mm solid shaft for gearbox drives. Shaft key set screws are standard on high-speed version for long shaft life.
  • Oil Seals and O-Rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-Rings have stainless steel garder springs for assure constant tension on the sealing surface.
  • Oil Drains: Quantity of 2. One in the rear cover and one in the bottom of the crankcase.
  • Oil Capacity: 32 oz.
  • Oil Sight Glasses: Rear cover and non-drive side bearing housing.
  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
  • Hot Water: High temperature kits are available to 180°F.
  • Wet End Repair: Very simple no special tools are required.
  • Mounting Flanges: Multiple flanges are available.
  • Buna-N: Elastomers available.
AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N
AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N

The AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N Specifications:

  • Max GPM………………12
  • Max LMP…………………………45
  • Max PSI………………….2200
  • Max Bar………………………….150
  • Power EBHP……………17.5
  • Bore Dia. mm…………………….28
  • Stroke mm……………….15
  • Weight Lbs………………………..36
  • Max Temp……………….140°
  • Oil Capacity………………………32oz
  • Inlet Thread ……………3/4”F
  • Discharge Thread……………….3/8”F

This not the right XW pump from Annovi Reverberi?  Click the link to see other XW pressure Washer pumps from ETS Company.

List Price: $5,356.49
Our Price: $3,304.46  Click the link to order the XWLA-SS12G22N from ETS Company.
You save $2,052.03!
Availability:: available for order
Product Code: XWLA-SS12G22N
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THIS XWLA-SS12G22N PRESSURE WASHER PUMP 3/14/2012

Posted on

CAT Pump 1K102 – Stainless Steel Submersible Pump

Spotlight on the CAT Pump 1K102 – Stainless Steel Submersible Pump.

CAT Pump 1K102 - Stainless Steel Submersible Pump
CAT Pump 1K102 - Stainless Steel Submersible Pump

CAT Pump 1K102 – Stainless Steel Submersible Pump, 45/25,115V, 1-1/4NPT,MAN,NORYL-IMP.

• The CAT Pump 1K102 has 304SSL construction offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Lubricated double mechanical seal on the CAT Pump 1K102 offers dependable performance with a variety of liquids.
• Air filled, continuous-duty motors for reliable, long term operation.
• The CAT Pump 1K102 has a Single phase motor features permanent split capacitor and thermal protection with automatic reset for added protection and extend motor life.
• Versatile, reliable operation whether fully or partially submerged.
• Multiple sizes from 1/3 to 1-1/2 hp offers application flexibility.
• Sealed float switch on the CAT Pump 1K1020 for automatic operation.

This CAT Pump 1K102 Features:

  • Flow Range ……………………………………………………..up to 88 GPM
  • Pressure Range ………………………………………………………..up to 24 PSI
  • …………………………………………………up to 55 Ft. Head
  • RPM ………………………………………………………….3450 RPM
  • Discharge Fitting 1/3 HP…………………………………………………1-1/4 NPT
  • 1/2-1-1/2 HP…………………………………………1-1/2 NPT
  • Motor Phase Single……………………………………………..Class F 115V
  • Three ……………………………………….Class F 208/230V
  • Three ……………………………………………..Class F 460V
  • Cycle …………………………………………………………………60 Hz
  • Cable Length 1 PH ………[Gauge AWG 16, UL/CSA 3-Prong] 20 Ft.
  • 3 PH …………………. [Gauge AWG 16, UL/CSA] 20 Ft.
  • Float Operation ……………………………………………Manual or Automatic
  • Maximum Starts/Hour ……………………………………………………………………20
  • Maximum Temperature (Continuous) ……………………………………….. 122°F
  • (Intermitent) ………………………………………… 140°F
  • Maximum Solids Diameter……………………………………………………………3/8″
  • Weight (see charts) ……………………………………………………………11-31 lbs.
  • Dimensions (see charts)
  • Length……………………………………………..10.25-17.18″
  • Diameter ……………………………………………..6.37-8.25″

This not the right submersible Pump?  Click the link to see all our Submersible Pumps from ETS Company.  We can Only advertise LIST Price.. CALL US FOR THE BEST PRICES ON ALL CAT SUBMERSIBLE AND NON SUBMERSIBLE PUMPS AT 1-877-824-7763.

List Price: $604.00
Our Price: $604.00  Click the link to order this CAT Pump 1K102 – Stainless Steel Submersible Pump.
Call 1-877-824-7763 for a Better Price
Availability:: available for order
Product Code: 1K102
CAT Pump – 1KUNIT,1/3HP,1PH
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE CAT PUMP 1K102 – 3/7/2012

Posted on

CAT Pump 3K111 – Stainless Steel Centrifugal Pump

Spotlight on the CAT Pump 3K111 – Stainless Steel Centrifugal Pump.

CAT Pump 3K111 - Stainless Steel Centrifugal Pump
CAT Pump 3K111 - Stainless Steel Centrifugal Pump

CAT Pump 3K111 – 3K Series – Single Stage Stainless Steel End-Suction Centrifugal Pump, 38GPM, 78FT HD, W/NCC SEAL,1-1/4″X1″NPT.

• The CAT Pump 3K111 has a 304SSL liquid-end construction offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Back pullout design of the CAT Pump 3K111 permits easy repair of impeller and seal.
• High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.
• Under casing foot mount and center line discharge of the CAT Pump 3K111 reduces misalignment and assures self-venting.
• Close coupled, motorized packages for compact and easy installation.

CAT Pump 3K111 - Exploded View
CAT Pump 3K111 - Exploded View

 The CAT Pump 3K111 – Stainless Steel Centrifugal Pump Features:

  • Flow Range ……………………………………………..5.5 to 90.0 GPM
  • Pressure Range ……………………………………………………10 to 63 PSI
  • …………………………………………..23 to 145 Ft. Head
  • Max. Working Pressure ………………………………………………………….125 PSI
  • Min. Inlet Pressure to Prime …………………………………………………………Flooded
  • RPM ………………………………………….1725 or 3450 RPM
  • Inlet Fitting 3K111-3K163, 3K361-3K363……………..1.25″ NPT
  • 3K171-3K193, 3K391-3K393……………….1.5″ NPT
  • Discharge Fitting All Models ……………………………………………1″ NPT
  • Horsepower Range …………………………………………………….1/3 to 3 HP
  • Motor Options 56J Frame TEFC Class F
  • 1/3-1/2HP……………….115/208-230V, 1 PH, 60 HZ
  • 3/4-1.0-1.5HP………………..115/230V, 1 PH, 60 HZ
  • 2.0HP …………………………………230V, 1 PH, 60 HZ
  • 1/3 to 3.0HP ……………208-230/460V, 3 PH, 60 HZ
  • Cycle …………………………………………………………….60 HZ
  • Max. Temperature Continuous …………………………………………. *160°F
  • Weight (Pump Only) 3K111, 3K141, 3K171 ………………………….8.4 Lbs.
  • 3K121, 3K151, 3K181 ………………………….8.7 Lbs.
  • 3K131, 3K161, 3K191, 3K361, 3K391…….9.0 Lbs.
  • Dimensions Pump Only (see chart)…………….9.63 x 8.18 x 4.52″
  • *Contact CAT PUMPS for applications above 160°F.

Not the CAT Pump Your looking for?  Click the Link to see all our CAT Pumps from ETS Company.

List Price: $583.00
Our Price: $583.00 Click the link to order this CAT Pump 3K111. or
Call 1-877-824-7763 for a Better Price We can’t List Online!

Availability:: available for order
Product Code: 3K111
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE CAT PUMP 3K111 – 3/05/2012

Posted on

ETS Company’s Experience Beats Home Depot and Lowes for Pressure Washers

Equipment Trade Service Company has been in the pressure washer / cleaning product specialists field since way before the big box stores like Home Depot and Lowes.  ETS Co strives to bring our customers the products and services they demand at the prices to fit their budget.  From Pressure Washers, Pumps, Parts, Kits and Accessories to Cleaning Chemicals, Generators, Water Pumps and even Graffiti Removal Products like Taginator and Tagaway.

In this endeavor we have struck deals with manufacturers of Pressure Washer and Cleaning Equipment like:

• CAT Pumps
• Annovi Reverberi (AR North America) Pressure Washer Pumps
• GIANT Pumps
• General Pumps
• Hypro Pumps
• Comet Pumps
• Mi-T-M Pressure Washers
• LANDA Pressure Washers

And MANY MORE!

Equipment Trade Service Company also has our own repair department for all your pressure washer and cleaning equipment products.  Our technicians have over 50 years in the industry.  This is just something stores like ACE, Home Depot and Lowes can’t offer.  In fact when they need some of their rentals repaired they come to ETS Company.  ETS offers Pressure Washer Service on virtually ALL brands (ALL makes and models) of pressure washers, steam cleaners and pressure washer pumps to the Delaware Valley. We service brands like LANDA, Mi-T-M, Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi, Hypro Pump and more!

ETS Company offers a FREE PRESSURE WASHER PUMP REPAIR ESTIMATE*

Call our service department at 1-877-824-7763 x 120 to discuss ETS Co repairing your pressure washer pump any make or model including but not limited to CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi & Hypro Pump. Ship it to us via UPS /FedEX (trackable service) **, ETS will estimate your pump, call you for repair approval and ship it back to you.
* Estimate is free to customers who choose to have ETS Co. Repair their pump
** Customers are responsible for shipping costs to and from ETS Co.

Our sales team at Equipment Trade Service Company has over 50 years experience in selling and getting the right answers to you fast!  It’s not some teenager right out of high school trying to figure out the part or O-Ring you need to repair your pressure washer –  the life blood of your business.  The big box stores like Home Depot or Lowes think that a few hours of training videos on a machine as complex as a pressure washer is enough training and skill to make their employees “experts” on the inner workings of pressure washers and other cleaning machines.  ETS Company relies on the know how and years of going over pressure washer breakdowns and looking up parts and kits for our customers needs as our training.  It’s not a few hours here, we are talking years of learning and helping which makes our customer service for your industrial cleaning needs # 1 when compared to all the other competition out there.

So the next time your Pressure Washer, Steam Cleaner or Pressure Washer pump from any manufacturer like LANDA, Mi-T-M, Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi, Hypro Pump needs repair or replacing, come to Equipment Trade Service Company first.  The big box stores Home Depot and Lowes and even ACE can’t compete with our knowledge and expertise to get you back on the road making money for yourself with the right equipment and knowledge.

Equipment Trade Service Company
Equipment Trade Service Company
Posted on

Comet PUMP AWD 4040 G-K

Spotlight on the Comet PUMP AWD 4040 G-K. (replacement pump is AWD 4036 G-K) Click here for replacment Pump

Comet PUMP AWD 4040 G-K
Comet PUMP AWD 4040 G-K

Comet Direct Drive Pump with Unloader & Chemical Injector
Rated 3600PSI, @ 4.0GPM
SKU: AWD-K4040G
Brand: Comet Pump

 

The Comet PUMP AWD 4040 G-K Features:

  • Comet AWD-K 4040G, AWD 4040 G-K Industrial Duty triplex plunger pump
  • Direct drive with 4 bolt gas mounting flange
  • Max. Volume: 4.0 GPM
  • Max. Discharge Pressure: 3600 PSI
  • Max. Pump Speed: 3,400 RPM
  • Shaft Diameter: 1” Hollow
  • Maximum Horsepower Requirements: 14.5 GHP
  • Built-In adjustable Uniflow unloader
  • Fixed chemical injector
  • Industrial duty triplex plunger pump design
  • Double seal packings (high & low)
  • Anodized crankcase
  • Ceramic plungers
  • Forged brass manifold
  • Stainless steel check valves
  • Inlet Port: 1/2″ FPT
  • Outlet Port: 3/8″ Male NPT
  • Auxiliary Port: 3/8″ FPT
  • Optional connectors shown below
  • Weight: 13.9 lb.

List Price: $800.00
Click the link to order the Comet Pump AWD 4040 G-K Special.
You save $571.23!
Availability::available for order WHILE SUPPLIES LAST!!
Product Code: 6520.0451.00

PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE COMET PUMP AWD 4040G-K – 2/29/2012

Posted on

CAT Pump 1CX013ELSPD251 – Misting Motor Pumps

Spotlight on the CAT Pump 1CX013ELSPD251 – Misting Motor Pumps.

CAT Pump 1CX013ELSPD251 – Misting Motor Pumps – 0.13/1000/1725, Inclds:1CX013ELS.MIST and 8180 Motor (1/4HP, 1PH), Pulse Hose.

CAT Pump 1CX013ELSPD251 - Misting Motor Pumps
CAT Pump 1CX013ELSPD251 - Misting Motor Pumps

• The CAT Pump 1CX013ELSPD251 is an Ultra-compact, direct-drive motor-pump-unit for portability and small spaces.
• Four-position head mounting for plumbing flexibility.
• Industrial stacked valves provide easy servicing.
• Concentric ceramic plunger and specially formulated seals provide extended seal life.
• Oil bath lubrication assures optimum drive-end lubrication on this CAT Pump 1CX013ELSPD251.
• Pressure regulator offers precision pressure setting and over-pressure protection.
• Pulse Hose minimizes pulsation and lowers amp draw.

CAT Pump 1CX013ELSPD251 - Misting Motor Pumps
CAT Pump 1CX013ELSPD251 - Misting Motor Pumps

CAT Pump 1CX013ELSPD251 – Misting Motor Pumps Features:

  • PUMP MODEL 1CX013ELS.MIST
  • Flow………………………………………………….0.13 gpm (0.49 lpm)
  • Pressure Range…………………………100 to 1000 psi (7 to 70 bar)
  • Stroke (Single Plunger)…………………………….0.079” (2.0 mm)
  • Maximum RPM………………………………1725 rpm (1725 rpm)
  • Inlet Pressure Range…………..Flooded to 60 psi (Flooded to 4 bar)
  • Bore………………………………………………….0.630” (16 mm)
  • Crankcase Capacity………………………….2.03 oz. (0.06 l)
  • Maximum Liquid Temperature……..up to 140°F (up to 60°C)
  • Inlet Port………………………………………3/8” NPTF (3/8” NPTF)
  • Discharge Port……………………………..1/4” NPTF (1/4” NPTF)
  • By-Pass Port………………………………..1/4” NPTF (1/4” NPTF)
  • Shaft Diameter………………………………………1/2” (12.7 mm)
  • Weight (Pump Only)…………………………..3.4 lbs. (1.5 kg)
  • Dimensions (Pump Only)…….3.62 x 5.12 x 6.85” (92 x 130 x 174 mm)

Is the CAT Pump 1CX012ELSPD251 not the right Misting Motor Pump Combo you need?  Click the link to see more Misting Pumps from CAT.

List Price: $708.00
Our Price: $708.00 Click the link to order the 1CX013ELSPD251
Call 1-877-824-7763 for a Better Price
Availability:: available for order
Product Code: 1CX013ELSPD251
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE 1CX013ELSPD251 – 2/27/2012

Posted on

CAT Pump 3DNX25GSI – Direct-Drive Plunger Pump

Spotlight on the CAT Pump 3DNX25GSI – Direct-Drive Plunger Pump.

CAT Pump 3DNX25GSI - Direct-Drive Plunger Pump
CAT Pump 3DNX25GSI - Direct-Drive Plunger Pump

CAT Pump 3DNX25GSI – Direct-Drive Plunger Pump, 2.5GPM, 2850PSI, 3450 RPM, Hollow Gas 3/4″ Shaft, Oil, BB.

• The CAT Pump 3DNX25GSI has a Triplex plunger design that provides a smooth liquid flow.
• Specially formulated V-Packings and concentric solid ceramic plungers assure true wear surface and extended seal life.
• The CAT Pump 3DNX25GSI is an Ultra-compact, hollow-shafted pump for direct mounting to gas engine.
• Integral Regulating Unloader with built-in by-pass standard on all units to assure system pressure control and pump protection.
• Fixed chemical injector standard on all units offers cleaning flexibility.
• This CAT Pump 3DNX25GSI has a Stacked valve design for ease in servicing.
• Swivel garden hose fitting with filter screen for easy inlet connection.

 

CAT Pump 3DNX25GSI - Direct-Drive Plunger Pump.
CAT Pump 3DNX25GSI - Direct-Drive Plunger Pump.

The CAT Pump 3DNX25GSI – Direct-Drive Plunger Pump Features:

  • MODEL 3DNX25GSI
  • Flow……………………………………………………2.5 GPM (9.5 L/M)
  • Max. Discharge Pressure ……………………..2850 PSI (196 BAR)
  • Max. RPM…………………………………………3450 RPM (3450 RPM)
  • Stroke…………………………………………………….0.268″ (6.8 mm)
  • Inlet Pressure Range…………………..Flooded to 60 PSI (Flooded to 4 Bar)
  • Bore …………………………………………………………..0.551″ (14 mm)
  • Max. Liquid Temperature ………………………………140°F (60°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Crankcase Capacity…………………………………….8.5 oz. (0.25 L)
  • Inlet Port (1) ……………………………………………3/4″ GHF (3/4″ GHF)
  • Accessory Port (1) …………………………………1/4″ NPTF (1/4″ NPTF)
  • Discharge Port (1)…………………………………….M18x1.0 (M18x1.0)
  • Chemical Discharge Port (1)…………………..3/8″ NPTM (3/8″ NPTM)
  • Chemical Injection Hose Barb …………………..1/4″ UNF (1/4″ UNF)
  • Shaft Diameter………………………………………………..3/4″ (19.0 mm)
  • Weight …………………………………………………….10.7 lbs. (4.9 kg)
  • Dimensions ………………………………..8.03 x 7.83 x 6.61″ (204 x 199 x 168 mm)

 

Click the link to find More CAT Plunger Style Pressure Washer Pumps from ETS Company.

List Price: $713.00
Our Price: $713.00 Click the link to order the CAT Pump 3DNX25GSI.
Call 1-877-824-7763 for a Better Price
Availability:: Available for Order
Product Code: 3DNX25GSI
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE CAT PUMP 3DNX25GSI – 2/24/2012

Posted on

AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX

Spotlight on the AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX.

2600PSI, 2.2GPM Annovi Reverberi Direct Drive Pump (Back Mount)
SKU:  SRMW2.2G26-EZ-SX
Brand:  Annovi Reverberi – AR North America

Spotlight on the AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX.
Spotlight on the AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX.

• Annovi Reverberi / AR North America SRMW2.2G26-EZ-SX, SRMW 22G26-EZ-SX, SRMW 2.2G26-EZSX Vertical Radial-Axial series replacement pump (Mounts under the engine)
• Axial Cam Pump with Easy Start is smooth starting and maintenance free
• Free thermal valve included with this SRMW2.2G26-EZ-SX pump
• Fits many models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troybilt, Etc.)
• Note: This SRMW2.2G26-EZ-SX pump is Back Mounted and turned 180º  and is mostly used on pressure washers made by Briggs Power Products
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
• The SRMW2.2G26-EZ-SX has a Vertical Mount with Gas Flange 3-6 HP

The Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX Features:

  • Max. Volume: 2.2 GPM
  • Max. Discharge Pressure: 2,600 PSI
  • Max. Pump Speed: 3,400 RPM
  • Shaft Diameter: 7/8” Hollow
  • Engine shafts longer that 2” will require spacers or washers
  • Built In unloader and chemical injector
  • Built In easy start valve
  • Maximum Horsepower Requirements: 5.2 GHP
  • Inlet Port: 3/4″ FGH (garden hose)
  • Outlet Port: 22mm (Twist Connect)
  • Aluminum manifold w/aluminum valve plugs
  • Stainless steel plungers
  • Pump comes with oil
  • Weight: 5.1 lb.

Notes on the Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX:

  • We do not have any mfg cross reference information available. However, RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
  • RMW pumps have a standard 22mm-14 twist connect outlet.
  • Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.

This not the right RM Annovi Reverberi pump for you?  Click the link to see all of our RM Pumps from ETS Company.

List Price: $194.30
Our Price: $126.61  Click the link to Order the SRMW2.2G26-EZ-SX Pressure Washer Pump.
You save $67.69!
Availability:: available for order
Product Code: SRMW2.2G26-EZ-SX
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE SRMW2.2G26-EZ-SX , AS OF 2-23/2012

Posted on

AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ

Spotlight on the AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ.

AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ
AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ

2600PSI, 2.2GPM Annovi Reverberi Direct Drive Pump (Front Mount)
SKU:  SRMW2.2G26-EZ
Brand:  Annovi Reverberi – AR North America

• Annovi Reverberi /AR North America SRMW2.2G26-EZ, SRMW 22G26-EZ, SRMW 2.2G26-EZ Vertical Radial-Axial series replacement pump (Mounts under the engine)
• Axial Cam SRMW2.2G26-EZ Pump with Easy Start is smooth starting and maintenance free
• Free thermal valve included with pump
• Fits most homeowner type vertical pressure washers with Front Mounted Pump
• NOTE: This SRMW2.2G26-EZ Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
• Some Briggs models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troy-bilt, Etc.) are Back Mounted / turned 180º (see SRMW2.2G26-EZSX)
• The SRMW2.2G26-EZ has a Vertical Mount with Gas Flange 3-6 HP

The SRMW2.2G26-EZ  Features:

  • Max. Volume: 2.2 GPM
  • Max. Discharge Pressure: 2,600 PSI
  • Max. Pump Speed: 3,400 RPM
  • Shaft Diameter: 7/8” Hollow
  • Engine shafts longer that 2” will require spacers or washers
  • Built In unloader and chemical injector
  • Built In easy start valve
  • Maximum Horsepower Requirements: 5.2 GHP
  • Inlet Port: 3/4″ FGH (garden hose)
  • Outlet Port: 22mm (Twist Connect)
  • Aluminum manifold w/aluminum valve plugs
  • Stainless steel plungers
  • Pump comes with oil

Notes on the SRMW2.2G26-EZ:

  • We do not have any mfg cross reference information available. However, RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
  • RMW pumps have a standard 22mm-14 twist connect outlet.
  • Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.

Not the right Annovi Reverberi Pump?  Click the link to see our full line of Pressure Washer Pumps By Annovi Reverberi.
List Price: $194.30
Our Price: $126.61 Click the link to Order the SRMW2.2G26-EZ
You save $67.69!
Availability:: available for order
Product Code: SRMW2.2G26-EZ
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE SRMW2.2G26-EZ  –  2/21/2012

Posted on

CAT Pump 1DX03ELS.MIST – Misting Plunger Pump

Spotlight on the CAT Pump 1DX03ELS.MIST – Misting Plunger Pump.

CAT Pump 1DX03ELS.MIST - Misting Plunger Pump
CAT Pump 1DX03ELS.MIST - Misting Plunger Pump

CAT Pump 1DX03ELS.MIST – Misting Plunger Pump, 0.3/1200,  Hollow 5/8″ Shaft, Oil, BB.

•The 1DX03ELS.MIST has Single or dual plunger design provides a smooth liquid flow.
•Specially formulated Hi-Pressure Seals and concentrically ground ceramic plungers assure maximum seal life.
•Stacked Stainless steel valve design for long life and easy servicing.
•The 1DX03ELS.MIST is Ultra compact, direct-drive low speed unit for quiet operation.
•Integral Regulator with built-in by-pass to assure system pressure control and pump protection.

Exploded view of the CAT Pump 1DX03ELS.MIST
Exploded view of the CAT Pump 1DX03ELS.MIST

CAT Pump 1DX03ELS.MIST – Misting Plunger Pump Features:

  • Flow…………………………………………………..0.3 GPM (1.14 L/M)
  • Maximum Discharge Pressure ……………..1200 PSI (85 BAR)
  • Stroke (Dual Plunger) ……………………………..0.078″ (2.0 mm)
  • Maximum RPM…………………………………1725 RPM (1725 RPM)
  • Inlet Pressure Range ……………..Flooded to 60 PSI (Flooded to 4 Bar)
  • Bore………………………………………………………0.630″ (16 mm)
  • Crankcase Capacity ……………………………….8.5 oz. (0.25 L)
  • Maximum Liquid Temperature…………………..140°F (60°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (1) ……………………………………3/8″ NPTF (3/8″ NPTF)
  • Discharge Port (1)…………………………….3/8″ NPTM (3/8″ NPTM)
  • Shaft Diameter ………………………………..5/8″ Hollow (15.8 mm Hollow)
  • Weight………………………………………………..10.7 lbs. (4.9 kg)
  • Dimensions……………………………7.99 x 7.75 x 6.29″ (203 x 197 x 160 mm)

Is this CAT Pump 1DX03ELS.MIST – Misting Plunger Pump not the correct model?  Click the link to see more CAT Plunger Pumps.

Our Price: $629.00  Click the link to order the CAT Pump 1DX03ELS.MIST.
Call 1-877824-7763 for better pricing!
Availability:: available for order
Product Code: 1DX03ELS.MIST
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE CAT PUMP 1DX03ELS.MIST – 2/13/2012