Hot Water 110V Pressure Washer 1000 PSI. Steam Combination Unit. This compact, portable, hot water pressure washer offers quiet operation and is suitable for a wide variety of industrial applications.
Pump: Direct drive triplex piston AR pump with ceramic plungers · Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · High pressure detergent injection
Motor: Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord with in-line GFCI which meets required CSA certification · Solid state electronic ignition
Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Electric cord hanger · Powder coated steel gun/wand holder • Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake
Components: Complete system diagnostic board · Float tank · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather · Energy efficient top-fired heat exchanger designed for convenient trouble-shooting and easy maintenance · High-quality fuel filter/water separator ensures clean fuel supply · Combination wet steam cleaner/pressure washer
Unit Includes: 50-foot x 3/8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F · Water output temperature for “wet” steam is approximately 250°F · Operates at 650-PSI in “wet” steam mode
HSE-1002-SM10 Mi-T-M Hot Pressure Washer / Steam Combo Unit
The HSE-1002-SM10 Mi-T-M Hot Pressure Washer / Steam Combo Unit Features:
2 GPM @ 1000 PSI
1.5 HP / 120V
Totally enclosed fan-cooled electric motor with manual thermal overload protection
Direct drive triplex piston pump with ceramic plungers and forged brass manifold
Thermal relief valve
Stainless-steel and brass unloader valve
High pressure detergent injection
Complete system diagnostic board
Solid state electronic ignition
Float tank
Pressure and high limit safety controls
No. 1 or No. 2 diesel or kerosene fired burner
Polyethylene burner fuel tank
Temperature rise 150°F/66°C above ambient, maximum outlet temperature 200 degrees F
Water output temperature for “wet” steam is approximately 250°
AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
4.0 GPM 3000 PSI INLET 3/8″ FPT OUTLET 3/8” MPT
1” SHAFT GAS ENGINE FLANGE BUILT IN UNLOADER VALVE
COVERED BY AR FIVE YEAR WARRANTY
The Annovi Reverberi RSV4G30D-F40 Plunger Pumps are designed for a wide variety of high pressure washing applications. These Annovi Reverberi RSV4G30D-F40 are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
This RSV4G30D-F40 Annovi Reverberi Pressure Washer Pump has the following specifications:
Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
List Price: $654.05 Our Price: $409.64 You save $244.41!
The parts breakdown for the RSV4G30D-F40 Annovi Reverberi Pressure Washer Pump can be seen by Clicking Here!
The RSV3G35D-F40 AR (Annovi Reverberi) Pressure Washer Pump
3 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
3.0 GPM 3500 PSI INLET 3/8″ FPT OUTLET 3/8” MPT1” SHAFT GAS ENGINE FLANGE BUILT IN UNLOADER VALVE
COVERED BY AR FIVE YEAR WARRANTY
The Annovi Reverberi RSV3G35D-F40 Plunger Pumps are designed for a wide variety of high pressure washing applications. These Annovi Reverberi RSV3G35D-F40 Pressure Washer Pumps are constructed of die-cast bodies and feature a forged brass head. The internal components of the RSV3G35D-F40 include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over-sized tapered roller bearings and the precision supports in the RSV3G35D-F40 assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods on this RSV3G35D-F40 are either a special alloy aluminum or bronze over-sized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
The specification for the Annovi Reverberi RSV3G35D-F40 are:
Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
List Price: $654.05 Our Price: $409.64 You save $244.41!
•Items NOT INCLUDED with your RSV3G35D-F40 pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
•The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
•PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
•The INLET WATER FILTER will catch most small debris before it enters your pump
•The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
•The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
•PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
3.0 GPM 2500 PSI INLET 3/8″ FPT OUTLET 3/8” MPT
3/4” SHAFT WITH GAS ENGINE FLANGE BUILT IN UNLOADER VALVE
COVERED BY AR FIVE YEAR WARRANTY
REPLACEMENT FOR DEVILBISS PK16642
Annovi Reverberi Plunger Pumps are designed for a wide variety of high pressure washing applications. The RSV3G25d-F25 is constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These Annovi Reverberi pressure washer pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
The Technical Specification for the Annovi Reverberi RSV3G25D-F25 Pressure Washer Pump are:
Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form TM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
List Price: $625.93 Our Price: $392.32 You save $233.61!
Availability:: Usually Ships in 24 hours.
Click Here for the RSV3G25D-F25 Annovi Reverberi Pressure Washer Pump Breakdown in PDF.
The SHP22.50N AR (Annovi Reverberi) Pump 5.8 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP22.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.
The Annovi Reverberi SHP22.50N Pressure Washer Pump Features:
High efficiency forged brass head & valve caps
Oversized “SKF” bearings are tapered for maximum life and load disbursement
Plungers are a special aluminum oxide blend, solid ceramic for long life
Specifications for the SHP22.50N Annovi Reverberi Pressure Washer Pump are:
Max. Volume: 5.8 GPM
Max. Discharge Pressure: 7,250 PSI
Max. Pump Speed: 1,450 RPM
Shaft Diameter: 24mm Solid
Max. Horsepower Requirements: 27.0 EBHP
Max. Fluid Temp.: 140° F.
Inlet Ports (2): 1/2″ Female
Outlet Ports (2): 3/8″ Female
Oil capacity: 32 oz
Weight: 29.0 lb.
SHP22.50N Annovi Reverberi Pressure Washer Pump
List Price: $2,853.82 Our Price: $1,763.81 You save $1,090.01!
Accessories for the SHP22.50N Annovi Reverberi Pump…
•Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
•The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
•PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
•The INLET WATER FILTER will catch most small debris before it enters your pump
•The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
•The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
•PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
SHP22.50N Pump Parts Breakdown can be seen by Clicking Here.
AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
2.5 GPM 2500 PSI INLET 3/8″ FPT OUTLET 3/8” MPT
3/4” SHAFT WITH GAS ENGINE FLANGE BUILT IN UNLOADER VALVE
The AR – Annovi Reverberi RSV2.5G25D-F25 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These Annovi Reverberi RSV2.5G25D-F25 pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
Specifications for the Annovi Reverberi RSV2.5G25D-F25 Plunger Pump are:
Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
List Price: $625.93 Our Price: $392.32 You save $233.61!
Parts Breakdown for the RSV2.5G25D-F25 can be found by Clicking Here.
