Tag: unloaders

Posted on

Comet Pumps – 8108.2532.00 Unloader – VRT-3

The Comet Pumps – 8108.2532.00 Unloader – VRT-3, is a pressure regulator that senses when your pressure washer pumps gun is in the standby or off position.  It diverts excess pressure into a bypass mode so no damage from excessive pressure gets to your pump.

This Comet Pumps – 8108.2532.00 Unloader – VRT-3 is rated for pressure washer pumps that have a flow rate of 8.0 GPM and a maximum PSI of 4500.  It is vital to have a working unloader on your pump, because if the pressure builds up too much in your pump you risk damaging the unit and then replacement would be the only option.  An unloader is a lot cheaper to replace on your pressure washer than the entire pump.

 

Comet Pumps - 8108.2532.00 Unloader - VRT-3
Comet Pumps – 8108.2532.00 Unloader – VRT-3

The Technical Specifications of the Comet Pumps – 8108.2532.00 Unloader – VRT-3 are:

  • 8.0 GPM
  • 194° F Max
  • PSI 4500
  • Inlet 3/8″ FPT
  • Outlet 3/8″ FPT
  • Color Black
  • MV #0215010320

Need to repair instead of replacing it?  Find this unloaders repair / breakdown manual by clicking here.  Find your part or kit and then order it here.  You can also order it over the phone by giving us a call toll free by clicking our number here: Call 1-877-824-7763 {Smart Phones Click to Call}

Or, order this entire unloader by clicking here, to get your comet driven pressure washer pump back up and running.

This unloader does qualify for our Everyday sale of 5% off of $50.00.  Just use the code “5off” at check out to get even more savings!

Posted on

CAT Pump 7535 Pressure Unloader

The CAT Pump 7535 Pressure Unloader is designed for CAT Pumps that have a maximum flow rate of 21 gpm at a PSI of 4000.  The minimum PSI is 800.  Then unloader is for a single or multiple pump set up with either a weep or multiple nozzle machine. This unit relays on a 5 to 10% bypass for creation of the optimal unloader performance.

This CAT Pump 7535 Pressure Unloader will maintain the pressure and go into a bypass mode when the trigger of your pressure washers spray gun is released, or if there is some type of external blockage in the downstream of the hose. 

CAT Pump 7535 Pressure Unloader
CAT Pump 7535 Pressure Unloader

The features of this CAT Pump 7535 Pressure Unloader are:

  • Maximum  Flow rate is 21 gpm
  • Minimum Pressure on the unloader is  800 psi
  • Maximum  Pressure output of the unit  is 4000 psi
  • Inlet Port Size measures  0.5
  • Discharge Port Size has a measurement of 0.5
  • Type of Accessory is a CAT Unloader
  • Material of the bodies construction is  Brass (BB)

Not sure if the CAT pump you have will work with this unloader? Or need to repair this unloader?  Find the repair manual / breakdown of your pump or of this unit to see if it will work for you or for parts for getting the unloader back up and running with out having to replace the whole unit.

Still not sure if the CAT Pump 7535 Pressure Unloader is correct? Just give us a call toll free and a CAT Pumps specialist will help you out.  Call 1-877-824-7763 {Smart Phones Click to Call}

Order this unloader here on our secure eCommerce site.

This unloader from CAT Pumps does qualify for our everyday sale of 5% off of $50.00.  Just use the code “5off” in the coupon field at check out to get an additional 5% off your subtotal.

Posted on

Annovi Reverberi Unloader – VR54-200

The Annovi Reverberi Unloader – VR54-200 is a red knobbed unloader for your pressure washer pump from AR pumps that requires a unit with a maximum volume of 8 GPM at a maximum PSI of 2900.  If your pump specs meet these requirements this is the unloader for you.

Annovi Reverberi Unloader – VR54-200 is totally adjustable made with a brass body for long life and has a high fluid temperature of 194° F. making this unit built to hold up even in the worst operating conditions you can get yourself into.

Annovi Reverberi Unloader - VR54-200
Annovi Reverberi Unloader – VR54-200

Already own a Annovi Reverberi Unloader – VR54-200, and want to try to fix it?  You can see if we have the repair kits you need by finding the units repair / breakdown manual here.  If you can’t figure out if you can fix it or are needing more assistance you can give our AR Pumps specialists a call toll free.  Call 1-877-824-7763 {Smart Phones Click to Call}

Here are the technical specifications of this Annovi Reverberi Unloader – VR54-200:

• Maximum Pressure of the unloader is 2,900 PSI
• Max. Volume of this unit is 8.0 GPM
• Knob Color is marked  RED
• Adjustable pressure
• Brass valve body
• Max. Fluid Temp. is rated at 194° F.
• Inlet Port measures  3/8″ MNPT
• Discharge Port has a measurement of 3/8” MNPT
• Bypass Port has a diameter of 3/8” FNPT
• This unit Replaces MV520K Unloader
• Weight of this unloader is only 13.7 oz

Still not sure if this Annovi Reverberi Unloader – VR54-200 is right for your pressure washer pump from AR Pumps?  Give us a call and we can help you.   Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this unit?  Just click here to order fast and secure on our eCommerce site.

This unit alone is a great price, thanks to our deal with Annovi Reveberi and we pass that on to you.  It does not however qualify by itself for our everyday 5% off sale.  You would need to add a little something else to your cart to get the total up to $50.00 and then you would get an additional 5% off your total.  Something like pump oil ? o-rings?  Whatever you need to get it up to $50.00 then just use the code “5off” in the coupon field at check out to get even more savings.

Posted on

General Pumps – PULSAR4KHPEZ – UNLOADER

Part # PULSAR4KHPEZ is a General Pumps unloader replacement part that is used on pumps for your pressure washer that require 10.5 gallon per minute flow rate with a maximum pressure rating of 4500 PSI.

This unloader PULSAR4KHPEZ is a trapped pressure type unit, that is used on most General Pumps and pressure washers that use these types of pumps.  It is a blue spring type in the PULSAR4 series and comes standard with and EZ start knob and valve.

PULSAR4KHPEZ unloader
PULSAR4KHPEZ unloader

This PULSAR4KHPEZ unloader has the following specifications:

  • The maximum GPM is rated at 10.5 GPM.
  • The unloader is Rated at 4050 PSI.
  • The Max. PSIof the unit is 4500.
  • This unloader has an Inlet measurement of 2 x 3/8″ NPT.
  • Outlet on this unloader is 3/8″ NPT.
  • Bypass of the unit is measured at 2 x 3/8″ NPT.
  • The Max. operating temperature of the unloader is 195 Degrees Fahrenheit.

 

Please check your General Pumps repair manual or parts breakdown here to determine of the PULSAR4KHPEZ unloader is the correct replacement unit for your pressure washer by clicking here and finding your pump model.

Not sure if this is the correct item for your pump and machine?  Give us a call toll free and a General Pump Specialist will be glad to assist you in determining the correct unloader for your pump.  Call 1-877-824-7763 {Smart Phones Click to Call}

If you are sure the PULSAR4KHPEZ unloader is the correct piece for you pressure washer pump them order it securely by clicking here.

Also, remember that we always offer one of the best coupon codes around that never expires.  Use code “5off” to get 5% off any order that is over $50.00.

Posted on

Annovi Reverberi Unloader VRT3-160 for your Pressure Washer Pump

This is a blog for the Annovi Reverberi Unloader VRT3-160 for your Pressure Washer Pump.  The unloader is a vital piece of equipment to protect you more expensive pump and machine from building up too much pressure.  This item is considered a fail safe and is less costly replace than a blown pump.

The VRT3-160 unloader will replace most unloaders that have a maximum PSI of 2320.  This pressure washer accessory also replaces older units like the AL605Y, AL605 and AL605X all of which are now obsolete.

Annovi Reverberi Unloader VRT3-160 for your Pressure Washer Pump
Annovi Reverberi Unloader VRT3-160 for your Pressure Washer Pump

 

The specifications of the VRT3-160 are as follows:

  • The unloader has an Over sized handle for easier adjustment.
  • This unit is made with a forged valve body for excellent strength.
  • The VRT3-160 has two inlet ports standard.
  • The item also has two by-pass ports also standard.
  • The unloaders ultra thick inlet and discharge ports are formed for added strength to the units PSI rating.
  • This items color coded springs and caps are done so for easy valve identification.
  • All the ports on the unloader are FNPT.

 

A few more technical specifications of the VRT3-160 unloader are:

• The unloaders internal construction are designed for a more efficient flow and operation.
• A set of dual locking nuts help with vibration resistant for setting maximum pressures of the unit.
• VRT3-160 has newer spring material making it more resistant to fatigue and its powder paint resists rusting.
• The pistons are made of a larger diameter to add more strength and contact area for shifting alignment.

If you already own a VRT3-160 unloader and want to try to repair it, you can find the breakdown and repair manual here.  If you’re not sure what unit you have installed on your pressure washers pump click here to find a list of other Annovi Reverberi unloaders and pumps.

Still not sure if this unit is the correct protection for your pressure washer and it’s pump?  Give one of our pump specialists a call and we will be glad to assist you in figuring out what is the right item for your unit.

Call 1-877-824-7763

Or if this is just a simple replacement and you know that this is the correct unloader for your pump, you can order it securely on our e-commerce site by clicking here: VRT3-160