Spotlight on the AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27.
AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27
SJW3G25D-F27 AR (Annovi Reverberi) Pump 3 GPM @ 2500 PSI, D Version 7/8″ Hollow Shaft
PARTS LIST: SJW 3400 rpm
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJW3G25D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJW3G25D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Specifications:
- Max GPM………………3
- Max LMP…………………………11.4
- Max PSI………………….2500
- Max Bar………………………….170
- Power EBHP……………5
- Bore Dia. mm…………………….15
- Stroke mm……………….6.8
- Weight Lbs………………………..11
- Max Temp……………….140°
- Oil Capacity………………………4.5oz
- Inlet Thread ……………1/2”M
- Discharge Thread……………….3/8”M
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Features
- Manifold of the SJW3G25D-F27:
- Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
- Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
- Bolts: Three bolts, 10mm, grade 8.8.
- Valves for the SJW3G25D-F27:
- Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps on the SJW3G25D-F27: Machined brass for greater strength.
- Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
- Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- Support and Guides for this SJW3G25D-F27: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
- Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
- Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
- Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
- Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
- Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
- Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Capacity: 4.5 oz.
- Dyno Proven: All SJW3G25D-F27 pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
- Wet End Repair: Very simple no special tools required.
- Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
- Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Is this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 not the right Annovi Reverberi Pump? Click the link to see more Annovi Reverberi Pumps from Shopetsonline.com
List Price: $484.10
Our Price: $305.01 Click the link to order the SJW3G25D-F27
You save $179.09!
Availability:: available for order
Product Code: SJW3G25D-F27
Price subject to change. Price valid on this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 – 5/9/2012
