Spotlight on the 117-4-225-CM CoxReels Caddy Mount Hose Reel
117-4-225-CM CoxReels Caddy Mount Hose Reel
The Features of the 117-4-225-CM CoxReels Caddy Mount Hose Reel:
Hose I.D.: 1/2”, O.D. 7/8″
The 117-4-225-CM Handles up to 225 Ft of hose
Pressure: To 4,000 PSI
High-Quality Two Piece 1” Steel Tube Frame Structure
Hose Control Bar Prevents Hose From Slipping Off The Discs
The 117-4-225-CM is equipped with a Direct Hand Crank Rewind Design
Base Has Holes For Temporary Mounting Or Permanent Installation
The NPT Swivel Inlet on the 117-4-225-CM is Machined From Solid Brass
Brake Assembly Provides Adjustable Friction To Brake Or Lock The Drum
The 117-4-225-CM has Swivel Seals made of NITRILE
The 117-4-225-CM CoxReels Caddy Mount Hose Reel has the following specifications:
The 117-4-225-CM is made of Professional Grade Heavy Duty Steel Construction
Durable Proprietary CPC™ Powder Coat Process
The 117-4-225-CM has Rolled Edges & Ribbed Discs Provide Strength & Safety
Leading 2-Year Manufacturer’s Limited Warranty
Made In The U.S.A. Sold & Supported Worldwide
This 117-4-225-CM Series “Caddy Mount” hand crank hose reel is perfect for carrying the extra long lengths of hose to the job site. It is lightweight, compact and versatile with working pressures up to 4,000 PSI. The hose control bar on the 117-4-225-CM prevents the hose from slipping off the side discs and makes it is easy to grab and go.
A Spotlight on the XMA4G20N Pressure Washer Pump from Annovi Reverberi.
XMA4G20N Pressure Washer Pump from Annovi Reverberi
The Technical Specifications of the XMA4G20N Pressure Washer Pump:
Max GPM………………4
Max PSI………………….2000
Power EBHP……………5.5
Bore Dia. mm…………………….18
Stroke mm……………….13.2
Weight Lbs………………………..14
Max Temp……………….140°
Oil Capacity………………………14.5oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
The Features on this XMA4G20N Pressure Washer Pump:
This XMA4G20N Pressure Washer Pump has Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
The Bolts on the XMA4G20N Pressure Washer Pump: Eight bolts, 6mm, grade 12.9.
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps of this XMA4G20N Pressure Washer Pump: Machined brass – greater strength.
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
The Plungers on the XMA4G20N Pressure Washer Pump: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
The XMA4G20N Pressure Washer Pump has a Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity of the XMA4G20N Pressure Washer Pump: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available on the XMA4G20N Pressure Washer Pump to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
XMA4G20N AR (Annovi Reverberi) Pump 4 GPM @ 2000 PSI. AR pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
Additional Info on the XMA4G20N Pressure Washer Pump:
Items NOT INCLUDED with your XMA4G20N pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD of the XMA4G20N will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE on this XMA4G20N will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
Get 5% off all your pressure washer pumps, parts, kits and accessories all summer long at https://www.shopetsonline.com/ your one stop shop for all things pressure washer related.
Use code 5off on your order over $50.00
5% off all pressure washer orders over $50.00
5% off all orders over $50.00*
Use Code 5off at Checkout *Online Orders ONLY – Excludes “Free Shipping” Items, and New Machine Purchases.
So get those pressure washer fixed up and ready for the summer heat.
Introducing Easy Peak™ – A Soft Wash Roof Restorer and House Wash Additive.
Introducing Easy Peak™ – A Soft Wash Roof Restorer
Pour Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your Bleach. Apply to roof, wait 5 to 15 minutes, gently flush rinse. EASY PEAK’s Tri-Surfactant System penetrates shingles with sheeting action and bubbles showing where applied. EASY PEAK enhances bleach performance for the highest quality job. EASY PEAK is stable in full strength 15% Chlorine liquid (Sodium Hypochlorite solution) and is Biodegradable and non-hazardous. EASY PEAK adds value to your work with its lasting Mountain Peak Fragrance that neutralizes bleach odor. Add EASY PEAK & VALUE to your work!
ADDITIVE Mix Instructions: Pour 1 or 2 fluid ounces of Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your 1 gallon of bleach solution then gently stir. The Bleach may be: (A) full strength 12% swimming pool liquid Chlorine Shock or diluted once or twice with water (B) 6% commercial strength bleach used full strength or diluted once with water (C) 3% household Bleach used full strength.
EASY PEAK – A Soft Wash Roof Restorer and House Wash Additive and
Bleach Transforms Filthy Roofs to Like New.
EASY PEAK – A Soft Wash Roof Restorer and House Wash Additive is available in quarts, gallons, cases & 5 and 55 gallon containers
Features of the Easy Peak™ – A Soft Wash Roof Restorer and House Wash Additive
Directions:
Roof streaks: Blend EASY PEAK & (B) 6% BLEACH. Apply with an all plastic pump up garden sprayer or professional spray application machine. Apply EASY PEAK & BLEACH blend directly onto streaked dirty roofs fully wetting each shingle and edges. Wait 5 to 15 minutes; rinse the roof with a flush of water. Water rinsing may be optional on lightly streaked roofs allowing next rainfall to do the rinsing.
Roof Moss: Blend EASY PEAK & (A) 12% or (B) 6% BLEACH to break down thick green moss growth found on roofs. Fully saturate the growth with EASY PEAK & BLEACH blend, allow 15 minutes of working time. Because thick moss tends to hang onto shingles, swipe the moss with a medium bristle brush or broom detaching the buildup. Blast with a garden hose or gentle pressure wash rinse. Repeat if necessary.
House & grounds wash: Blend EASY PEAK & (C) 3% bleach. Following direction as above to clean and restore siding, gutters, painted surfaces, brick, stucco, fences, concrete walk and driveways.
JOB TIP: When warm days and warm roofs cause product evaporation; reapply more EASY PEAK & BLEACH blend keeping the shingles wetted for 15 minutes.
JOB TIP: On very hot days it is best to work in the mornings. Or, cool the shingles with a flood of cold water then apply EASY PEAK & BLEACH blend.
JOB TIP: If the BLEACH BLEND will be unavoidably over spray onto shrubs and plantings, cover them with light weight plastic sheeting or pre-wet and kept wet during cleaning job. Pay more attention to house sides without rain gutters.
Cautions: Working on ladders and roofs is dangerous, especially wet roofs. Never walk on roofs without OSHA approved personal fall prevention safety harness equipment. Wear OSHA approved personal protective inhalation equipment and skin and eye contact prevention wear. Bleach will discolor clothing. Read the MSDS and product labels for Easy Peak – A Soft Wash Roof Restorer and House Wash Additive and your bleach information.
Pour Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your Bleach. Apply to roof, wait 5 to 15 minutes, gently flush rinse. EASY PEAK’s Tri-Surfactant System penetrates shingles with sheeting action and bubbles showing where applied. EASY PEAK enhances bleach performance for the highest quality job. – 1 Quart
Pour Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your Bleach. Apply to roof, wait 5 to 15 minutes, gently flush rinse. EASY PEAK’s Tri-Surfactant System penetrates shingles with sheeting action and bubbles showing where applied. EASY PEAK enhances bleach performance for the highest quality job. – 1 Gallon
Pour Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your Bleach. Apply to roof, wait 5 to 15 minutes, gently flush rinse. EASY PEAK’s Tri-Surfactant System penetrates shingles with sheeting action and bubbles showing where applied. EASY PEAK enhances bleach performance for the highest quality job. – 1 CASE of Quarts
Pour Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your Bleach. Apply to roof, wait 5 to 15 minutes, gently flush rinse. EASY PEAK’s Tri-Surfactant System penetrates shingles with sheeting action and bubbles showing where applied. EASY PEAK enhances bleach performance for the highest quality job. – 5 Gallons
Pour Easy Peak – A Soft Wash Roof Restorer and House Wash Additive into your Bleach. Apply to roof, wait 5 to 15 minutes, gently flush rinse. EASY PEAK’s Tri-Surfactant System penetrates shingles with sheeting action and bubbles showing where applied. EASY PEAK enhances bleach performance for the highest quality job. – 55 Gallon Drum
Caution:
AVOID CONTACT WITH SKIN AND EYES. Do not take internally. It is advisable to wear safety glasses and/or face shield and protective gloves. Wash hands with clear water after handling. Material Safety Data Sheet is available upon request.
KEEP OUT OF REACH OF CHILDREN
FIRST AID: If taken internally, drink water and do not induce vomiting. Seek medical attention. If contact with skin or eyes occurs, flush with water for 15 minutes. Seek medical attention if irritation develops.
CONTACT CUSTOMER SERVICE AT: 610-583-7657
Proudly made in the U.S.A.
Regulatory & liability information: The user assumes full responsibility in testing and usage. In no event shall ETS Co. be held liable for consequential or incidental damage exceeding the cost of this product. This product should be in no way used other than stated in the instructions on this product.
FOR CHEMICAL EMERGENCY CONTACT CHEM TEL INC. 1-800-255-3924
Easy Peak – A Soft Wash Roof Restorer and House Wash Additive is available in 1 gallon, 5 gallon and 55 gallon containers.
Spotlight on the SXMV3.5G40D-F24 Pressure Washer Pump from Annovi Reverberi.
This SXMV3.5G40D-F24 Pressure Washer Pump is an ETS BOLT-N-GO PUMP SPECIAL!
SXMV3.5G40D-F24 Pressure Washer Pump from Annovi Reverberi.
The Technical Specifications of the SXMV3.5G40D-F24 pressure washer pump:
Max GPM………………3.5
Max LMP…………………………13.2
Max PSI………………….4000
Max Bar………………………….220
Power EBHP……………7.7
Bore Dia. mm…………………….15
Stroke mm……………….8.2
Weight Lbs………………………..16
Max Temp……………….140°
Oil Capacity………………………14.6oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
Features of the SXMV3.5G40D-F24:
Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow on the SXMV3.5G40D-F24 Pressure Washer Pump.
Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps: Machined brass – greater strength.
Packing and Plungers of this SXMV3.5G40D-F24 Pressure Washer Pump:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
– Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing on the SXMV3.5G40D-F24 Pressure Washer Pump is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber on the SXMV3.5G40D-F24 Pressure Washer Pump. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall the SXMV3.5G40D-F24 Pressure Washer Pump efficiency is increased.
ETS BOLT-N-GO PUMP SPECIAL! THIS PUMP SHIPS WITH A MANUAL, BOLT-ON STYLE UNLOADER, THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! SXMV3.5G40D-F24 AR (Annovi Reverberi) Pump 3.5 GPM @ 4000 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
SXMV3.5G40D-F24 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass heads with a bayonet style sight glass in the rear and side covers. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material over sized for maximum strength and load disbursement. Spinning at 1750 RPM, this SXMV3.5G40D-F24 pump was designed to deliver 3.5 GPM at 4000 PSI.
Recommended Accessories for this SXMV3.5G40D-F24 pressure washer pump:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
Availability:: available for order Product Code:ARWP-RTR-SXMV3.5G40D-F24
Price subject to change on the SXMV3.5G40D-F24 pressure washer pump from Annovi Reverberi.
Features of the RMV2.5G30-EZ Annovi Reverberi Pressure Washer Pump:
Manifold: High strength forged brass for long term use.
Bolts: Three 6mm cadmium plated steel.
Plungers: Hardened stainless steel.
Valves: Stainless steel poppet, seat and cage, stainless steel spring.
Seals: Buna-N dual seals.
Bearings: Premium over sized ball and needle bearings.
Crankshaft: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
This RMV2.5G30-EZ plunger pump will pump up to 2.5 GPM at 3000 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 – 5.5 HP engines. The hollow shafted RMV2.5G30-EZ pump includes a built-in pressure control valve, and chemical injection system.
You save $100.79! Availability:: available for order Product Code:RMV2.5G30-EZ
Price subject to change on the RMV2.5G30-EZ pressure washer pump from Annovi Reverberi
Spotlight on the XMV3G30D-F24 Pressure Washer Pump.
XMV3G30D-F24 3GPM 3000PSI 1″ GAS FLANGE:
XMV3G30D-F24 Pressure Washer Pump.
Technical Specifications of the XMV3G30D-F24 Pressure Washer Pump:
Triplex Plunger Pump
Direct Drive with Gas Flange
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 3000 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Shaft Diameter: 1″ ID with gas flange
Weight: 19 lb.
This XMV3G30D-F24 Pressure Washer Pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in postion on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
Get your Pressure Washers back in shape with our Springtime SALE of 10% off!
Spring Time Sale! 10% OFF all orders over $125.00
10% off all orders over $125.00*
Use Code 10off at Checkout *Online Orders ONLY – Excludes “Free Shipping” Items, and new machine purchases.
Go To Shopetsonline.com and purchase your repair kits, parts, pumps or accessories to fix up or fine tune your pressure washer for the coming summer and spend $125.00 or more and get 10% off your subtotal at checkout!
You save $266.06! Availability:: available for order Product Code:6501.0059.00
Price subject to change on the 6501.0059.00 AXD 2527 G-T Pressure Washer Pump
You save $1,806.61! CALL 1-877-824-7763 for More information Availability:: available for order Product Code: HPW3050-OEP
Price on the HPW3050-OEP subject to change
