Is this MV560 UNLOADER not the right unloader for your pressure washer pump? Click the link to see all our pressure washer pump unloaders from ETS Company.
List Price: $56.46 Our Price: $43.45 Click the link to order the MV 560 Unloader You save $13.01! Availability:: available for order Product Code: BAPL-6147 Price subject to change. Price valid on the MV 560 Unloader 4/9/2012
PA VB3KA UNLOADER List Price: $59.34 Our Price: $45.66 Click the link to order the PA VB3KA Unloader You save $13.68!
Availability:: available for order Product Code: BAPL-4107 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE PA VB3KA UNLOADER FOR PRESSURE WASHER PUMPS 4/5/2012
KE Series Pressure Washer Pumps from General Pumps FEATURES:
• A “New Generation” Pump
• Triplex Plunger Pump, available in 5 flows
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication
• SAE-B hydraulic drive bell housing and flexible couplers available
KE series pressure washer pump from General Pumps
KE Series Pressure Washer Pumps from General Pumps MATERIALS:
• High resistance light alloy die cast aluminum crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special antifriction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves
• Pumps are also available with 316 SS packing components.
These models use prefix “KEN”
KE series pressure washer pump from General Pumps
KE Series Pressure Washer Pumps from General Pumps COMMON SPECIFICATIONS:
KE Series Pressure Washer Pumps from General Pumps PUMP OPTIONS:
• “F” version features flushing option
• “G” version suitable for pumping high-temperature glycols (up to 140o F)
• “N” version available with 316 Stainless Steel packing components, maximum water
temperature 185oF
• SAE-J 744-B hydraulic drive bell housing and flexible couplers available.
Just Make a $50.00 OR more purchase on Shopetsonline.com and enter code BLOOM at check out and you will get $15.00 off your order. Can only be used on Fridays, Saturdays and Sundays in the month of April. Starts April 6th 2012. Also Check us out on Facebook, Twitter and YouTube for more information and Great Deals…
This MV540K Unloader for Pressure Washer Pumps not the right unloader for your pressure washer? Click the link to see more Unloaders from ETS Company.
List Price: $66.69 Our Price: $41.06 Click the link to order this MV540K Unloader. You save $25.63! Availability:: available for order Product Code: MV540K PRICE SUBJECT TO CHANGE. PRICE VALID ON THE MV540K UNLOADER 3/28/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7.
AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7
BOLT-N-GO SPECIAL! INCLUDES THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! SHIPS WITH MANUAL TOO!
ANNOVI REVERBERI SJV3G27, D Version 3/4″ Hollow Shaft great for most 5 and 5-1/2 hp gas engines with straight shaft! For parts just enter any part number on this breakdown in our search box for pricing and availability. SJV PARTS LIST
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oitl) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJV3G27D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 Features:
MANIFOLD: High strength forged brass for long term use.
BOLTS: Three 10mm grade 8.8.
PISTONS: Ceramic coated stainless steel for longer pump life in harsh environments.
CRANKCASE: Precision die-cast, large cooling fins for maximum heat dissipation. Sight glass, fill and drain plugs.
BEARINGS: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages provide extra long life and positive seating.
SEALS AND V-PACKINGS: Continuously lubricating for extended life.
UNLOADER: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7
The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 has the following specifications:
List Price: $524.94 Our Price: $258.63 Click the link to order the SJV3G27D-F7 Pressure Washer Pump. You save $266.31! Availability:: available for order Product Code: ARWP-RTR-SJV3G27D-F7 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE SJV3G27D-F7 – 3/23/2012
• Triplex plunger design on the CAT Pump 42HS gives smoother fluid flow.
• High pressure seals are completely lubricated and cooled by the fluid being pumped.
• The CAT Pump 42HS has Inlet and discharge valve assemblies interchange for easier maintenance.
• Lubricated low pressure seal provides double protection against external leakage.
• The CAT Pump 42HS has an Oil bath crankcase assures optimum lubrication.
• Close tolerance concentricity of the ceramic plunger maximizes seal life.
• The CAT Pump 42HS can have an Optional Gearbox or Flexible Coupling version for direct mounting to gas engine.
CAT Pump 42HS - 5 Frame Plunger Pump
The CAT Pump 42HS – 5 Frame Plunger Pump has the following Features:
MODEL 42HS
Volume ………………………………………….4.5 GPM (17 L/M)
Dchg. Pressure ……………………….100 to 2000 PSI (7-140 BAR)
RPM ……………………………………………3600 RPM (3600 RPM)
Bore…………………………………………………..0.630″ (16 mm)
Stroke………………………………………………..0.335″ (8.5 mm)
Maximum Inlet Pressure ……..Flooded to 60 PSI (0.35 to 4 BAR)
Crankcase Capacity …………………………….18 oz. (0.55 L)
Maximum Fluid Temperature ………………..160°F (71°C)
Inlet Ports (2) ………………………………….1/2″ NPT (1/2″ NPT)
Discharge Ports (2)………………………….3/8″ NPT (3/8″ NPT)
Shaft Diameter……………………………………0.787″ (20 mm)
Weight ……………………………………………20.9 lbs. (9.5 kg)
Dimensions………………………..12.0″x 8.35″x 5.5″ (304.5 x 212 x 139 mm)
If you already have a Cat Pumps model number that you need to find price and availability on, just enter the model number into our search box. Please call Toll Free for volume & re-sale AND OTHER GREAT discounts WE CAN’T LIST ONLINE at 1-877-824-7763! Any other questions just give us a call!
Spotlight on the MG4000 Unloader with SWITCH – 8107.2511.00.
MG4000 Unloader with SWITCH - 8107.2511.00
The MG4000 Unloader features a brass valve body with a stainless steel ball and seat. The adjustment knob allows for simple adjustment from 100 PSI to maximum pressure. The adjustment knob also has a tamper resistant setting that can be locked. This unloader is rated to 8 GPM & 195°F.
Female ports include 2 – 3/8″ inlet – 3/8″ outlet – 2 – 3/8″ bypass plus 1/4″ gauge port.
The microswitch on the unloader can be used as normally open or normally closed. Use this switch as a time delay, shut down or as a burner control – 15 amp.
The MG4000 Unloader with SWITCH – 8107.2511.00 Features:
Maximum Temp : 195 °F
Maximum Pressure : 1500 PSI
Max Flow Rate : 8 GPM
Manufacturer : MTM Hydro
Model : MG4000 Unloader
Pressure Washer Type : Hot Water
Category : Switches, Pump Fittings & Unloaders
Call 1-877-824-7763 for pricing on this MG4000 Unloader with SWITCH – 8107.2511.00
Not the Pressure Washer Unloader you were looking for? Click the link to see more Unloaders from ETS Company.
AL VR2 Unloader Valve 2,500 PSI
SKU: AL643
Brand: Annovi Reverberi – AR North America
The VR2 – Unloader – AL643 Features:
AL VR2 Pressure Unloader
Maximum Pressure: 2,500 PSI
Max. Volume: 6.0 GPM
Brass body
Max. Fluid Temp.: 190 degrees F.
Inlet Port: 3/8″ MPT
Discharge Port: 3/8” MPT
Bypass Port: 3/8” MPT
1.9 lb. weight
This not the right unload for your pressure washer? Click the link to see all the unloaders from ETS Company.
List Price: $72.67 Our Price: $44.74 Click the link to order the VR2- Unloader – AL643. You save $27.93! Availability:: available for order Product Code: AL643 PRICE SUBJECT TO CHANGE. PRICE ON THE VR2 – UNLOADER – AL643 FROM 3/15/2012.
PA VB3KA UNLOADER for Pressure Washer Pumps Features:
