Spotlight on the AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7.
AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7
BOLT-N-GO SPECIAL! INCLUDES THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! SHIPS WITH MANUAL TOO!
ANNOVI REVERBERI SJV3G27, D Version 3/4″ Hollow Shaft great for most 5 and 5-1/2 hp gas engines with straight shaft! For parts just enter any part number on this breakdown in our search box for pricing and availability. SJV PARTS LIST
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oitl) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJV3G27D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 Features:
MANIFOLD: High strength forged brass for long term use.
BOLTS: Three 10mm grade 8.8.
PISTONS: Ceramic coated stainless steel for longer pump life in harsh environments.
CRANKCASE: Precision die-cast, large cooling fins for maximum heat dissipation. Sight glass, fill and drain plugs.
BEARINGS: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages provide extra long life and positive seating.
SEALS AND V-PACKINGS: Continuously lubricating for extended life.
UNLOADER: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7
The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 has the following specifications:
List Price: $524.94 Our Price: $258.63 Click the link to order the SJV3G27D-F7 Pressure Washer Pump. You save $266.31! Availability:: available for order Product Code: ARWP-RTR-SJV3G27D-F7 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE SJV3G27D-F7 – 3/23/2012
• Triplex plunger design on the CAT Pump 42HS gives smoother fluid flow.
• High pressure seals are completely lubricated and cooled by the fluid being pumped.
• The CAT Pump 42HS has Inlet and discharge valve assemblies interchange for easier maintenance.
• Lubricated low pressure seal provides double protection against external leakage.
• The CAT Pump 42HS has an Oil bath crankcase assures optimum lubrication.
• Close tolerance concentricity of the ceramic plunger maximizes seal life.
• The CAT Pump 42HS can have an Optional Gearbox or Flexible Coupling version for direct mounting to gas engine.
CAT Pump 42HS - 5 Frame Plunger Pump
The CAT Pump 42HS – 5 Frame Plunger Pump has the following Features:
MODEL 42HS
Volume ………………………………………….4.5 GPM (17 L/M)
Dchg. Pressure ……………………….100 to 2000 PSI (7-140 BAR)
RPM ……………………………………………3600 RPM (3600 RPM)
Bore…………………………………………………..0.630″ (16 mm)
Stroke………………………………………………..0.335″ (8.5 mm)
Maximum Inlet Pressure ……..Flooded to 60 PSI (0.35 to 4 BAR)
Crankcase Capacity …………………………….18 oz. (0.55 L)
Maximum Fluid Temperature ………………..160°F (71°C)
Inlet Ports (2) ………………………………….1/2″ NPT (1/2″ NPT)
Discharge Ports (2)………………………….3/8″ NPT (3/8″ NPT)
Shaft Diameter……………………………………0.787″ (20 mm)
Weight ……………………………………………20.9 lbs. (9.5 kg)
Dimensions………………………..12.0″x 8.35″x 5.5″ (304.5 x 212 x 139 mm)
If you already have a Cat Pumps model number that you need to find price and availability on, just enter the model number into our search box. Please call Toll Free for volume & re-sale AND OTHER GREAT discounts WE CAN’T LIST ONLINE at 1-877-824-7763! Any other questions just give us a call!
Spotlight on the MG4000 Unloader with SWITCH – 8107.2511.00.
MG4000 Unloader with SWITCH - 8107.2511.00
The MG4000 Unloader features a brass valve body with a stainless steel ball and seat. The adjustment knob allows for simple adjustment from 100 PSI to maximum pressure. The adjustment knob also has a tamper resistant setting that can be locked. This unloader is rated to 8 GPM & 195°F.
Female ports include 2 – 3/8″ inlet – 3/8″ outlet – 2 – 3/8″ bypass plus 1/4″ gauge port.
The microswitch on the unloader can be used as normally open or normally closed. Use this switch as a time delay, shut down or as a burner control – 15 amp.
The MG4000 Unloader with SWITCH – 8107.2511.00 Features:
Maximum Temp : 195 °F
Maximum Pressure : 1500 PSI
Max Flow Rate : 8 GPM
Manufacturer : MTM Hydro
Model : MG4000 Unloader
Pressure Washer Type : Hot Water
Category : Switches, Pump Fittings & Unloaders
Call 1-877-824-7763 for pricing on this MG4000 Unloader with SWITCH – 8107.2511.00
Not the Pressure Washer Unloader you were looking for? Click the link to see more Unloaders from ETS Company.
AL VR2 Unloader Valve 2,500 PSI
SKU: AL643
Brand: Annovi Reverberi – AR North America
The VR2 – Unloader – AL643 Features:
AL VR2 Pressure Unloader
Maximum Pressure: 2,500 PSI
Max. Volume: 6.0 GPM
Brass body
Max. Fluid Temp.: 190 degrees F.
Inlet Port: 3/8″ MPT
Discharge Port: 3/8” MPT
Bypass Port: 3/8” MPT
1.9 lb. weight
This not the right unload for your pressure washer? Click the link to see all the unloaders from ETS Company.
List Price: $72.67 Our Price: $44.74 Click the link to order the VR2- Unloader – AL643. You save $27.93! Availability:: available for order Product Code: AL643 PRICE SUBJECT TO CHANGE. PRICE ON THE VR2 – UNLOADER – AL643 FROM 3/15/2012.
Spotlight on the AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N.
AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N
XWLA-SS12G22N AR (Annovi Reverberi) Pump 12 GPM @ 2200 PSI.
In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XWLA-SS12G22N pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XWLA-SS12G22N feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack.
The AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N Features:
Manifold:
– 316L – Stainless Steel Block Style: Strength and no porosity = long life.
– Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
– Offset Discharge Ports: High efficiency, smooth flow
– Bolts: 8 Bolts, 10mm, stainless steel.
Valves:
– Ultra Form Cages: Durable, strength, and long life.
– Poppets, Seat and Spring: 316 series stainless steel.
– Valve Caps: Machined 316L series stainless steel.
Packing and Plungers:
– High Pressure Packing: “Special profile” style (W-1) Viton (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “W-2” style Viton, good positive seal.
– Support and Guides: Machined stainless steel, 1-piece construction with intermediate and guide rings to assure proper plunger alignment, maximize packing and seal life.
– Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable. Ultra thick with a locating step and SST retaining bolts.
Bearings: Premium over sized taper for maximum life and load disbursement.
Bearings Supports: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” orginal. Oil drain plug.
Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system.
Special acorn style retaining nuts and SST slingers.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connection Rods: 2-piece special alloy bronze for higher pressures, oversized for maximum strength, load disbursement, and life. Heavy pin area construction.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 24mm solid shaft for gearbox drives. Shaft key set screws are standard on high-speed version for long shaft life.
Oil Seals and O-Rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-Rings have stainless steel garder springs for assure constant tension on the sealing surface.
Oil Drains: Quantity of 2. One in the rear cover and one in the bottom of the crankcase.
Oil Capacity: 32 oz.
Oil Sight Glasses: Rear cover and non-drive side bearing housing.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180°F.
Wet End Repair: Very simple no special tools are required.
Mounting Flanges: Multiple flanges are available.
Buna-N: Elastomers available.
AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N
The AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N Specifications:
Max GPM………………12
Max LMP…………………………45
Max PSI………………….2200
Max Bar………………………….150
Power EBHP……………17.5
Bore Dia. mm…………………….28
Stroke mm……………….15
Weight Lbs………………………..36
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………3/4”F
Discharge Thread……………….3/8”F
This not the right XW pump from Annovi Reverberi? Click the link to see other XW pressure Washer pumps from ETS Company.
List Price: $5,356.49 Our Price: $3,304.46 Click the link to order the XWLA-SS12G22N from ETS Company. You save $2,052.03! Availability:: available for order Product Code: XWLA-SS12G22N PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS XWLA-SS12G22N PRESSURE WASHER PUMP 3/14/2012
• The CAT Pump 1K102 has 304SSL construction offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Lubricated double mechanical seal on the CAT Pump 1K102 offers dependable performance with a variety of liquids.
• Air filled, continuous-duty motors for reliable, long term operation.
• The CAT Pump 1K102 has a Single phase motor features permanent split capacitor and thermal protection with automatic reset for added protection and extend motor life.
• Versatile, reliable operation whether fully or partially submerged.
• Multiple sizes from 1/3 to 1-1/2 hp offers application flexibility.
• Sealed float switch on the CAT Pump 1K1020 for automatic operation.
This CAT Pump 1K102 Features:
Flow Range ……………………………………………………..up to 88 GPM
Pressure Range ………………………………………………………..up to 24 PSI
Float Operation ……………………………………………Manual or Automatic
Maximum Starts/Hour ……………………………………………………………………20
Maximum Temperature (Continuous) ……………………………………….. 122°F
(Intermitent) ………………………………………… 140°F
Maximum Solids Diameter……………………………………………………………3/8″
Weight (see charts) ……………………………………………………………11-31 lbs.
Dimensions (see charts)
Length……………………………………………..10.25-17.18″
Diameter ……………………………………………..6.37-8.25″
This not the right submersible Pump? Click the link to see all our Submersible Pumps from ETS Company. We can Only advertise LIST Price.. CALL US FOR THE BEST PRICES ON ALL CAT SUBMERSIBLE AND NON SUBMERSIBLE PUMPS AT 1-877-824-7763.
Spotlight on the CAT Pump 3K111 – Stainless Steel Centrifugal Pump.
CAT Pump 3K111 - Stainless Steel Centrifugal Pump
CAT Pump 3K111 – 3K Series – Single Stage Stainless Steel End-Suction Centrifugal Pump, 38GPM, 78FT HD, W/NCC SEAL,1-1/4″X1″NPT.
• The CAT Pump 3K111 has a 304SSL liquid-end construction offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Back pullout design of the CAT Pump 3K111 permits easy repair of impeller and seal.
• High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.
• Under casing foot mount and center line discharge of the CAT Pump 3K111 reduces misalignment and assures self-venting.
• Close coupled, motorized packages for compact and easy installation.
CAT Pump 3K111 - Exploded View
The CAT Pump 3K111 – Stainless Steel Centrifugal Pump Features:
Flow Range ……………………………………………..5.5 to 90.0 GPM
Pressure Range ……………………………………………………10 to 63 PSI
…………………………………………..23 to 145 Ft. Head
Max. Working Pressure ………………………………………………………….125 PSI
Min. Inlet Pressure to Prime …………………………………………………………Flooded
Equipment Trade Service Company has been in the pressure washer / cleaning product specialists field since way before the big box stores like Home Depot and Lowes. ETS Co strives to bring our customers the products and services they demand at the prices to fit their budget. From Pressure Washers, Pumps, Parts, Kits and Accessories to Cleaning Chemicals, Generators, Water Pumps and even Graffiti Removal Products like Taginator and Tagaway.
In this endeavor we have struck deals with manufacturers of Pressure Washer and Cleaning Equipment like:
Equipment Trade Service Company also has our own repair department for all your pressure washer and cleaning equipment products. Our technicians have over 50 years in the industry. This is just something stores like ACE, Home Depot and Lowes can’t offer. In fact when they need some of their rentals repaired they come to ETS Company. ETS offers Pressure Washer Service on virtually ALL brands (ALL makes and models) of pressure washers, steam cleaners and pressure washer pumps to the Delaware Valley. We service brands like LANDA, Mi-T-M, Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi, Hypro Pump and more!
ETS Company offers a FREE PRESSURE WASHER PUMP REPAIR ESTIMATE*
Call our service department at 1-877-824-7763 x 120 to discuss ETS Co repairing your pressure washer pump any make or model including but not limited to CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi & Hypro Pump. Ship it to us via UPS /FedEX (trackable service) **, ETS will estimate your pump, call you for repair approval and ship it back to you. * Estimate is free to customers who choose to have ETS Co. Repair their pump
** Customers are responsible for shipping costs to and from ETS Co.
Our sales team at Equipment Trade Service Company has over 50 years experience in selling and getting the right answers to you fast! It’s not some teenager right out of high school trying to figure out the part or O-Ring you need to repair your pressure washer – the life blood of your business. The big box stores like Home Depot or Lowes think that a few hours of training videos on a machine as complex as a pressure washer is enough training and skill to make their employees “experts” on the inner workings of pressure washers and other cleaning machines. ETS Company relies on the know how and years of going over pressure washer breakdowns and looking up parts and kits for our customers needs as our training. It’s not a few hours here, we are talking years of learning and helping which makes our customer service for your industrial cleaning needs # 1 when compared to all the other competition out there.
So the next time your Pressure Washer, Steam Cleaner or Pressure Washer pump from any manufacturer like LANDA, Mi-T-M, Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump, Annovi Reverberi, Hypro Pump needs repair or replacing, come to Equipment Trade Service Company first. The big box stores Home Depot and Lowes and even ACE can’t compete with our knowledge and expertise to get you back on the road making money for yourself with the right equipment and knowledge.
List Price: $82.80 Our Price: $49.11 Click the link to order this pressure washer accessory kit EQUK-77157 You save $33.69! Availability:: available for order Product Code: EQUK-77157 PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS PRESSURE WASHER ACCESSORY KIT EQUK-77157 – 3/2/2012
The MG4000 Unloader with SWITCH – 8107.2511.00 Features:
