FREE SHIPPING from Shopetsonline!
On all orders from: $35.00 – $500.00
Valid Feb. 16th – 29th
Use code
FEBFREE
at check out
FREE SHIPPING from Shopetsonline!
AR Annovi Reverberi R1272A Electric Motor
Spotlight on the AR Annovi Reverberi R1272A Electric Motor.
AR Annovi Reverberi R1272A Electric Motor – 5.0 HP – 24mm Hollow Shaft – Connector Box on Left, Black Anodized.
AR pumps R1272A electric motors are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
The AR Annovi Reverberi R1272A Electric Motor Features:
- RPM: 1750
- Thermal Protection: On request
- Voltage: 230V
- Enclosure: TEFC
- Phase: 1
- Service Factor: 1.0
- Hertz: 60
- Frame: H112
- Full Load Amps: 23
- Bearings: KBC 6306ZZ/1pcs
- Weight: 66 lbs
Is the R1272A not the right motor? Click the link to see all AR Annovi Reverberi Motors from ETS Company.
List Price: $930.62
Our Price: $572.89 Click the link to order the R1272A Electric Motor.
You save $357.73!
Availability:: available for order
Product Code: R1272A
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE R1272A ELECTRIC MOTOR 2/15/2012
CAT Pump 1DX03ELS.MIST – Misting Plunger Pump
Spotlight on the CAT Pump 1DX03ELS.MIST – Misting Plunger Pump.
CAT Pump 1DX03ELS.MIST – Misting Plunger Pump, 0.3/1200, Hollow 5/8″ Shaft, Oil, BB.
•The 1DX03ELS.MIST has Single or dual plunger design provides a smooth liquid flow.
•Specially formulated Hi-Pressure Seals and concentrically ground ceramic plungers assure maximum seal life.
•Stacked Stainless steel valve design for long life and easy servicing.
•The 1DX03ELS.MIST is Ultra compact, direct-drive low speed unit for quiet operation.
•Integral Regulator with built-in by-pass to assure system pressure control and pump protection.
CAT Pump 1DX03ELS.MIST – Misting Plunger Pump Features:
- Flow…………………………………………………..0.3 GPM (1.14 L/M)
- Maximum Discharge Pressure ……………..1200 PSI (85 BAR)
- Stroke (Dual Plunger) ……………………………..0.078″ (2.0 mm)
- Maximum RPM…………………………………1725 RPM (1725 RPM)
- Inlet Pressure Range ……………..Flooded to 60 PSI (Flooded to 4 Bar)
- Bore………………………………………………………0.630″ (16 mm)
- Crankcase Capacity ……………………………….8.5 oz. (0.25 L)
- Maximum Liquid Temperature…………………..140°F (60°C)
- Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Inlet Ports (1) ……………………………………3/8″ NPTF (3/8″ NPTF)
- Discharge Port (1)…………………………….3/8″ NPTM (3/8″ NPTM)
- Shaft Diameter ………………………………..5/8″ Hollow (15.8 mm Hollow)
- Weight………………………………………………..10.7 lbs. (4.9 kg)
- Dimensions……………………………7.99 x 7.75 x 6.29″ (203 x 197 x 160 mm)
Is this CAT Pump 1DX03ELS.MIST – Misting Plunger Pump not the correct model? Click the link to see more CAT Plunger Pumps.
Our Price: $629.00 Click the link to order the CAT Pump 1DX03ELS.MIST.
Call 1-877824-7763 for better pricing!
Availability:: available for order
Product Code: 1DX03ELS.MIST
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 1DX03ELS.MIST – 2/13/2012
AR Annovi Reverberi Pressure Washer Pump CWX15.17N
Spotlight on AR Annovi Reverberi Pressure Washer Pump CWX15.17N 3.96 GPM @ 2500 PSI, Car Wash Pump.
CWX15.17N Industrial triplex car wash pumps a perfect marriage with any vehicle wash system. Belt-driven or direct-drive pumps are specially designed for the purpose of Car Wash equipment and Car Wash supply. Specially designed seals, huge connecting rods, super thick ceramic plungers, premium bearings and forged brass manifold (with a lifetime warranty) insure the pump will give years of continuous, trouble free service. AR heavy-duty CWX15.17N car wash pumps provide low maintenance and allow service to be quick and affordable.
The AR Annovi Reverberi Pressure Washer Pump CWX15.17N Features:
- Manifold : High strength forged brass for long term use
- Bolts : Eight 10mm grade 8.8
- Plungers : Special thick solid ceramic for long life, strong durability and more resilient
- Crankcase : Precision die-cast, large cooling fins and anodized for the maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs
- Bearings : Over sized premium tapered roller bearing for maximum life and load disbursement
- Bearing Support : Precision die cast and machined to assure concentricity, alignment and strength
- Valves, Seats and Springs: Stainless steel with specially designed ultra form cages to provide long life and positive seating
- Seals and U-Packing : Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal
- Plunger Rods : High strength stainless steel, for heavy duty use
- Connecting Rods : Two piece special alloy aluminum based material, over sized for maximum strength, load disbursement, and long life. Heavy pin construction, for added load strength
The AR Annovi Reverberi Pressure Washer Pump CWX15.17N Specifications:
- Max GPM………………3.96
- Max LMP…………………………15
- Max PSI………………….2500
- Max Bar………………………….170
- Power EBHP……………7.5
- Bore Dia. mm…………………….20
- Stroke mm……………….16.6
- Weight Lbs………………………..32
- Max Temp……………….140°
- Oil Capacity………………………32oz
- Inlet Thread ……………3/4”F
- Discharge Thread……………….3/8”F
Not the right carwash pump? Click the link to see more Car Wash Pumps from ETS Company.
List Price: $1,350.00
Our Price: $905.86 Click the link to order the CWX15.17N.
You save $444.14!
Availability:: available for order
Product Code: CWX15.17N
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE AR Annovi Reverberi Pressure Washer Pump CWX15.17N – 2/8/2012
AR Annovi Reverberi Pressure Washer Pump RHW15.15N
Spotlight on the AR Annovi Reverberi Pressure Washer Pump RHW15.15N.
AR Annovi Reverberi Pressure Washer Pump RHW15.15N 185º Hot Water Triplex Plunger Pump. Designed for a wide variety of high pressure washing applications. The AR Annovi Reverberi Pressure Washer Pump RHW15.15N are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems
2200PSI, 3.96GPM Annovi Reverberi Solid Shaft Pump, 185º Hot Water
SKU: RHW15.15N
Brand: Annovi Reverberi – AR North America
The AR Annovi Reverberi Pressure Washer Pump RHW15.15N Features:
- Manifold: Nickel plated forged brass.
- Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
- Bearings: Over sized tapered roller bearing for maximum life and load disbursement.
- Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
- Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
- Seals and V-Packing: 185º Viton high temperature machined.
- Plunger Rods: High strength stainless steel construction.
- Connecting Rods: One-piece bronze for higher pressure, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
The AR Annovi Reverberi Pressure Washer Pump RHW15.15N Specifications:
- Max. Volume: 3.96 GPM
- Max. Discharge Pressure: 2,200 PSI
- Max. Pump Speed: 1,450 RPM
- Shaft Diameter: 24mm Solid
- Maximum Horsepower Requirements: 5.5 BHP
- Max. Fluid Temp.: 185º F.
- Inlet Ports (2): 1/2″ FPT
- Discharge Ports (2): 3/8″ FPT
- Drive Side: Standard right
- Weight: 20.0 lb.
Is this pump not the right AR Annovi Reverberi pump? Click the link to see all our pumps from AR Annovi Reverberi.
List Price: $1,569.08
Our Price: $896.25 Click the link to order the RHW15.15N Pump.
You save $672.83!
Availability:: available for order
Product Code: RHW15.15N
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS AR Annovi Reverberi Pressure Washer Pump RHW15.15N – 2/8/2012
CAT Pump 152R080 – 150 Frame R-Series
Spotlight on the CAT Pump 152R080 – 150 Frame R-Series, CS w/Key, 200/1200, 355 RPM, SFTK V/P, (Delrin Valve), SSD/SSD-Valves.
The CAT Pump 152R080 Features:
•The CAT Pump 152R080 has Triplex design delivers high efficiency and low pulsation.
•Durable dual V-Packings are lubricated and cooled by pumped liquid.
•Pre-Set Lo-Pressure Seals on the CAT Pump 152R080 provide secondary protection against external leaks and require no packing adjustment.
•Special high density, polished, concentric plungers provide a true wear surface and extended seal life.
•Specially formulated Seals and V-Packings offer unmatched performance and extended seal life.
•Ceramic plungers, Seals and V-Packings on the CAT Pump 152R080 are serviceable from the top of the crankcase permitting easy in-field servicing.
The CAT Pump 152R080 has the following Technical Specifications:
- Flow…………………………….. 200 gpm (757 l/m) 152 gpm (576 l/m)
- Barrels Per Day (U.S., Petroleum) — — 5211 bbl/d —
- Pressure Range*………… 100 to 1200 psi (7 to 85 bar) 100 to 1200 psi (7 to 85 bar)
- Maximum RPM………….. 355 rpm (355 min-1) 270 rpm (270 min-1)
- Bore…………………………….. 3.15” (80 mm) 3.15” (80 mm)
- Inlet Pressure Range……………….Flooded to 50 psi (Flooded to 3.5 bar)
- Minimum RPM……………………………………………75 rpm (75 min-1)
- Stroke………………………………………………………………5.91” (150 mm)
- Crankcase Capacity………………………………..22.4 Gals (85 l)
- Lubrication…………………………………………………..Splash (splash)
- Maximum Liquid Temperature………………….140°F (60°C)
- Inlet Ports (2) (Flange Required)……………………6.0” (150 mm)
- Discharge Ports (2) (Flange Required)………….4.0” (100 mm)
- Shaft Diameter…………………………………………….3.937” (100 mm)
- Weight……………………………………………………..3087 Lbs (1400 kg)
- Dimensions………………………68.11 x 42.13 x 22.05” (1730 x 1070 x 560 mm)
Is this CAT Pump not the pump you were looking for? Click the link to see all of our CAT Pumps…
| CAT Pump 152R080 |  Break Down |
 Service Manual |
List Price: $106,245.00
Our Price: $106,245.00 Click the link to order the CAT Pump 152R080.
Availability:: Available for Order
Product Code: 152R080
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 152R080 – 2-6-2012
GIANT PUMPS 22655 FLOW ACTUATED UNLOADER
Spotlight on the GIANT PUMPS 22655 FLOW ACTUATED UNLOADER.
Each GIANT PUMPS 22655 FLOW ACTUATED UNLOADER has a 160 degree F maximum, 3/8″ FPT in, 3/8″ MPT out and 1/2 or 3/4 bypass. Choose between 3000 and 4000 PSI and 1.5 – 4.8 GPM.
GIANT PUMPS 22655 FLOW ACTUATED UNLOADER Features:
- Does not trap full system pressure
- Giant 22600 series unloaders must be sized to match the output of the pump in gallons per minute, (GPM)
- AS A RULE, IF THERE IS ANY QUESTION ON WHICH UNLOADER TO SELECT IN BORDER LINE CASES, SELECT THE LOWER GPM RATING OF THE TWO
- Forged brass body
- Manufactured in the United States
GIANT PUMPS 22655 FLOW ACTUATED UNLOADER has the following Technical Specifications:
- Maximum Pressure : 3000 PSI
- Max Flow Rate : 4 GPM
- Maximum Temp : 160 °F
- Manufacturer : Giant
- Model : Giant Model 22648
- Category : Pump Fittings & Unloaders
The GIANT PUMPS 22655 FLOW ACTUATED UNLOADER not the unloader you need? Click the link to see all our Unloaders.
List Price: $144.88
Our Price: $111.49 Click the link to order the GIANT PUMPS 22655 Flow Actuated Unloader.
You save $33.39!
Availability:: available for order
Product Code: BAPL-1482
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE GIANT PUMPS 22655 FLOW ACTUATED UNLOADER 2/3/2012
NEW AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo
Spotlight on the AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo.
AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo. Features:
•Max GPM 0.34
•Max PSI 1450
•Power EBHP 0.3
•Bore Dia mm 12
•Motor EBHP 0.8
•Inlet Ø in. 3/8” M
•Outlet Ø in. M22 M
Not the right pump / motor combo? Click the link to see all our AR Annovi Reverberi Pump & Motor Combo’s.
List Price: $1,014.90
Our Price: $624.77 Click the link to purchase the HPV-MO-13.10.
You save $390.13!
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE HPV-MO-13.10 – 2/1/2012
New Pump Package RRV4G36-PKG from AR Annovi Reverberi
AR Annovi Reverberi Pressure Washer Pump RRV4G36-PKG, 3 GPM @ 3200 PSI.
The RRV4G36-PKG Features:
- RRV4G36D-F24 – Pump
- Max PSI: 3200
- Max GPM: 3
- RPM: 3400
- 1″ Hollow Shaft
- Gymatic Unloader
- F-24 Gas Engine Flange
- Tpp140 – Thermal Relief Valve
- AR1264750 – Garden hose adapter
More pump packages from AR Annovi Reverberi can be found by clicking the link AR Pump Packages.
List Price: $805.42
Our Price: $495.82 Click the link to order the RRV4G36-PKG.
You save $309.60!
Availability:: available for order
Product Code: RRV4G36-PKG
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE RRV4G36-PKG – 1/31/2012
CAT Pump 7630 Regulating Unloader w/Handle
Spotlight on the CAT Pump 7630 Regulating Unloader w/Handle (2.0-10.5 GPM, 400-5100 PSI) for CAT Pumps: 5CP, 45, 57, 60, 70, 530, 550.
This CAT Pump 7630 Regulating Unloader is designed for single gun or pump operation. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. The pressure sensitive feature permits a wide range of flows and quickly resumes full pressure when the gun is opened or the obstruction cleared. The CAT Pump 7630 Regulating Unloader is NOT recommended for weep systems. 5-10% by-pass is necessary for optimum performance.
The CAT Pump 7630 Regulating Unloader Features:
- Max Flow: 10.5 gpm
- Min Pressure: 400 psi
- Max Pressure: 5100 psi
- Inlet Port Size: 0.37
- Discharge Port Size: 0.5
- Type of Accessory: Unloader
- Material: Brass (BB)
Not the pressure washer unloader you were looking for? See all our unloaders by clicking the link pressure washer unloader.
List Price: $268.00 Click the link to order the CAT Pump 7630 Regulating Unloader.
Our Price: $268.00
Call 1-877-824-7763 {for a better Prices}
Availability:: Available for Order
Product Code: 7630
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE 7630 REGULATING UNLOADER 1/30/2012