MTM Hydro – 17.0853 – ROTATING SEWER NOZZLE

MTM Hydro – 17.0853 – ROTATING SEWER NOZZLE. One of the best priced and hardest working rotating sewer nozzles on the market today! Get it here: ORDER YOURS TODAY! #mtmhyrdo #sewernozzle #pressurewasher #pressurewasheraccessory item is stainless steel and brass 1/4″ NTP F

MTM Hydro - 17.0853 - ROTATING SEWER NOZZLE
MTM Hydro – 17.0853 – ROTATING SEWER NOZZLE

Duct Cleaning is vital to a good healthy home

How to Keep Cleaning Pollutants Out of Your Home

The effects of indoor air pollution are underestimated by many people. Americans spend around 90% of their day indoors and yet are far more likely to be concerned about the air outside of their homes. It is true that cars and factories release an enormous amount of pollutants. However, this is easily dispersed into the atmosphere. A commercial cleaning with a mosmatic duct cleaners and pressure washer will boost health, but there could be chemicals in those cleaners which gets trapped inside buildings.

Duct Cleaning
Duct Cleaning

What Causes Indoor Air Pollution?

There are many everyday products which can pollute the air of enclosed spaces. Chemical cleaners, tobacco, candles, formaldehyde, dust, paint, bathroom products and cookers can all release pollutants which damage air quality. Many of these are essential and irreplaceable products, such as cleaners, but they release dangerous byproducts. If you are cleaning for the sake of good health, then check that you are not damaging health by trapping pollutants inside.  Push them outside via turbo driven mosmatic duct cleaner powered by a good pressure washer.

What are the Effects of Indoor Pollution?

Poor air quality impacts health enormously. Since this is the air you will be inhaling for 90% of your day, it can have a negative effect over time. Breathing dirty air can significantly increase the risk of asthma and respiratory diseases. In the worst case, it can promote the growth of cancerous cells. It is therefore vital that you take steps to clean your indoor air regularly with some type of pressure washer driven duct cleaner.

How to Keep Your Indoor Air Clean

The key to clean indoor air is good ventilation. This can be as simple as leaving windows open. During and after cleaning, leaving your windows open will allow pollutants to disperse into the atmosphere and let in fresh air. You should check that ventilation systems are working properly, especially in kitchen and bathroom areas. Regularly clean out the air vents with a personal pressure washer and duct cleaner attachment so that the dirty air can pass through.

You should then aim to cut down on the worst causes of pollution. Ideally, give up smoking, but if you can’t, then at least do it outside rather than in an enclosed public area. You should also avoid using candles where possible. There are natural, chemical free toiletries if you are serious about cutting down your impact on air quality.

Cleaning is an essential part of a healthy home or work environment. However, for extra health measures, take air pollution into account. Leave windows open and air vents clear to ensure chemicals do not become trapped inside an enclosed building.

For Duct Cleaning  pressure washer attachments go here.

 

LANDA Part # – 8.917-700.0

The LANDA Part # – 8.917-700.0 is a banjo bolt used on almost every LANDA made pressure washer for repair.  The piece is also very universal on other machines that LANDA private labels.    Please check your repair manuals for this part number or the non formatted version of 89177000.

This LANDA Part # – 8.917-700.0 is a shorter banjo style bolt measuring about 1/2 inch.  It has a 1/4″ NPT port for connecting to your pressure washers.  The unit is made of solid brass and can withstand even the harshest situations you can put your machine through.

LANDA Part # - 8.917-700.0
LANDA Part # – 8.917-700.0

LANDA Part # – 8.917-700.0 is a threaded type of connector which you can clearly see in the photo above.

You can check your machines repair / breakdown manual here to see if this part is used on it, or you can give us a call to inquire about this or other LANDA Parts you might need for your machine.   Call 1-877-824-7763 {Smart Phones Click to Call}  You can also find other Karcher / Hotsy Machines this part may be used on by clicking here.

Feel free to order this item by clicking here.

This item alone does not qualify for our everyday sale of 5% off of $50.00, but if you add more parts from your machines repair manual you might be able to apply the code “5off” to get an additional 5% off your subtotal of $50.00 or more.

Annovi Reverberi Repair Kit AR2864

Annovi Reverberi Repair Kit AR2864 is the main valve repair kit you will need to fix your RK, RKA, RCW or RW pump that is made by AR Pumps.    This repair kit is complete with everything you will need to repair one of these pumps, at least for the valves.  It contains six o-rings and six valves, so you will only need one kit per pump.

The Annovi Reverberi Repair Kit AR2864 has parts that are made from the best rubber and plastic as well as steel to give these replacement parts long life and exceptional water tightness.

Annovi Reverberi Repair Kit AR2864
Annovi Reverberi Repair Kit AR2864

The Annovi Reverberi Repair Kit AR2864 has the following items included in it:

  • Quantity of six of the part number – 31389051 which is the Complete Valve.
  • It also has a quantity of six of the part number  – 880830 which is the O-Rings.

If you are not sure if this repair kit for AR Pumps is the correct one for your pressure washers pump, find your pumps repair / breakdown manual here and verify that this is indeed the right fix for your machines pump.

If, after checking above link for your Annovi Reverberi pumps repair part, you are still not sure if this is the correct fix, give us a call toll free and we will be happy to assist you.  Please be sure to have your Pumps model number before you call.  It will always begin with letters and usually 3 or 2 followed by numbers.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this valve repair kit?  Do so by clicking here to quickly and easily order on our e-Commerce site.

This items is priced to move with the best discounts you will find on AR Pump repair kits.  However, if you add something like Oil or another small item to bring your total to over $50.00 you will then be able to get an additional 5% off with our Everyday sale of 5% off over $50.00.  Just use the code “5off” in the coupon code field  at check out to get your additional savings.

Cat Pumps 33060 Valve Kit for – 5CP3120 Pump

The Cat Pumps 33060 Valve Kit for – 5CP3120 Pump from Cat is the kit you will need to repair this unit on your pressure washer.  It’s a common kit and easy to replace yourself to get your pump back up and running fast.  Perfect for the DIY-er.

You will need 2 of this Cat Pumps 33060 Valve Kit for – 5CP3120 Pump in order to completely repair this part of your pump.  The kit has all the pieces including the o-rings to  do the repair.

Cat Pumps 33060 Valve Kit for - 5CP3120 Pump
Cat Pumps 33060 Valve Kit for – 5CP3120 Pump

As seen in the photo above the Cat Pumps 33060 Valve Kit for – 5CP3120 Pump has the following:

  • 6 – o-rings
  • 3 – cat pumps valves.

Again if you are doing this repair yourself, which you can easily do you will need to order two of these kits to replace all the valves on your 5CP3120 pump.

This kit is also used on the 5CP5210 pump from CAT as well.  Not sure what pump you have or if this is the right kit for your needs.  Find all the repair / breakdown manuals here for CAT, to see if this is the valve kit for you. Once you know it’s the right kit, order it here fast and easy.   Don’t forget to order 2 of them!

Not sure if your looking at the right repair kit, give us a call with your CAT Pump Model number toll free and we will figure out the best fix for your unit. Call 1-877-824-7763 {Smart Phones Click to Call}

The best news about this kit is, that it does qualify for our Everyday 5% off sale.  So go here and order 2 of them and then at check out put the code “5off” in the coupon field and you will get an additional 5% off your subtotal.

Comet Pumps – 8108.2532.00 Unloader – VRT-3

The Comet Pumps – 8108.2532.00 Unloader – VRT-3, is a pressure regulator that senses when your pressure washer pumps gun is in the standby or off position.  It diverts excess pressure into a bypass mode so no damage from excessive pressure gets to your pump.

This Comet Pumps – 8108.2532.00 Unloader – VRT-3 is rated for pressure washer pumps that have a flow rate of 8.0 GPM and a maximum PSI of 4500.  It is vital to have a working unloader on your pump, because if the pressure builds up too much in your pump you risk damaging the unit and then replacement would be the only option.  An unloader is a lot cheaper to replace on your pressure washer than the entire pump.

 

Comet Pumps - 8108.2532.00 Unloader - VRT-3
Comet Pumps – 8108.2532.00 Unloader – VRT-3

The Technical Specifications of the Comet Pumps – 8108.2532.00 Unloader – VRT-3 are:

  • 8.0 GPM
  • 194° F Max
  • PSI 4500
  • Inlet 3/8″ FPT
  • Outlet 3/8″ FPT
  • Color Black
  • MV #0215010320

Need to repair instead of replacing it?  Find this unloaders repair / breakdown manual by clicking here.  Find your part or kit and then order it here.  You can also order it over the phone by giving us a call toll free by clicking our number here: Call 1-877-824-7763 {Smart Phones Click to Call}

Or, order this entire unloader by clicking here, to get your comet driven pressure washer pump back up and running.

This unloader does qualify for our Everyday sale of 5% off of $50.00.  Just use the code “5off” at check out to get even more savings!