Annovi Reverberi Accessory – AL-QCOKIT3/8

The Annovi Reverberi Accessory – AL-QCOKIT3/8 is an o-ring kit, that comes with 25 o-rings that measure 3/8″. These o-rings are used in a number of places on a number of different pressure washer pumps from Annovi Reverberi.

This Annovi Reverberi Accessory – AL-QCOKIT3/8 seen above is made of Buna Rubberized material for long lasting use even in the harshest of environments. Even though they are durable, it is one of the most repaired parts of your pump, so be sure to stock up on a few of these kits so you are never without them for a quick on the job repair.

Not sure if your pump uses the o-rings from this Annovi Reverberi Accessory – AL-QCOKIT3/8? Just find your pumps breakdown / repair manual here and see. They should work on most pressure washer pumps AR makes, but if your can’t find your manual above or are still having issues, give us a quick call and we will be happy to help you determine if this is the right sized o-rings your need for in the field fixes. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this Annovi Reverberi Accessory – AL-QCOKIT3/8? Do so by clicking here and ordering one or more from our secure eCommerce store.

October 18, 2017

Annovi Reverberi Unloader – VR54-200

The Annovi Reverberi Unloader – VR54-200 is a red knobbed unloader for your pressure washer pump from AR pumps that requires a unit with a maximum volume of 8 GPM at a maximum PSI of 2900. If your pump specs meet these requirements this is the unloader for you.

Annovi Reverberi Unloader – VR54-200 is totally adjustable made with a brass body for long life and has a high fluid temperature of 194° F. making this unit built to hold up even in the worst operating conditions you can get yourself into.

Already own a Annovi Reverberi Unloader – VR54-200, and want to try to fix it? You can see if we have the repair kits you need by finding the units repair / breakdown manual here. If you can’t figure out if you can fix it or are needing more assistance you can give our AR Pumps specialists a call toll free. Call 1-877-824-7763 {Smart Phones Click to Call}

Here are the technical specifications of this Annovi Reverberi Unloader – VR54-200:

• Maximum Pressure of the unloader is 2,900 PSI
• Max. Volume of this unit is 8.0 GPM
• Knob Color is marked RED
• Adjustable pressure
• Brass valve body
• Max. Fluid Temp. is rated at 194° F.
• Inlet Port measures 3/8″ MNPT
• Discharge Port has a measurement of 3/8” MNPT
• Bypass Port has a diameter of 3/8” FNPT
• This unit Replaces MV520K Unloader
• Weight of this unloader is only 13.7 oz

Still not sure if this Annovi Reverberi Unloader – VR54-200 is right for your pressure washer pump from AR Pumps? Give us a call and we can help you. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this unit? Just click here to order fast and secure on our eCommerce site.

This unit alone is a great price, thanks to our deal with Annovi Reveberi and we pass that on to you. It does not however qualify by itself for our everyday 5% off sale. You would need to add a little something else to your cart to get the total up to $50.00 and then you would get an additional 5% off your total. Something like pump oil ? o-rings? Whatever you need to get it up to $50.00 then just use the code “5off” in the coupon field at check out to get even more savings.

October 16, 2017

LANDA High Limit Switch 8.712-297.0

The LANDA High Limit Switch 8.712-297.0 is rated for 230 Degrees and has a 42″ wired lead. This pig tailed switch is and OEM from LANDA that will work on most machines it makes, and is easy to install.

This LANDA High Limit Switch 8.712-297.0 runs as the safety device that will shut off your machines burner and in turn prevent water in the unit from over heating and turning into steam. The device will not let the LANDA machine turn back on until the water had cooled to about 50 to 70 degress.

Features of this for this LANDA High Limit Switch 8.712-297.0:

HEAVY DUTY BRASS HOUSING.
UL – CSA RATED BIMETAL SWITCH COMPONENTS.
¼” MALE SPADE LUG TERMINALS.
NORMALLY USED WITH AN ADJUSTABLE OR FIXED RANGE THERMOSTAT.

Not sure if this LANDA High Limit Switch 8.712-297.0 is the correct fix for your LANDA Pressure Washer? Find your machines breakdown / repair manual here to verify if this is the correct fix for your unit. Don’t see your breakdown here? Give us a call toll free and a specialist will be happy to assist you to get you up and running fast.

Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this repair part for your LANDA Machine? Click here to order safely and securely on our eCommerce site here.

October 11, 2017

SUTTNER ST-36 SLUDGE PUMP 6.0 KIT

SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, is the perfect item for moving large amounts of slurry or water in a very short period of time. All you have to do is attach a hose from a portable pressure washer or even a car wash bay, and the water that starts flowing through this high pressure nozzle will create a powerful suction that allows for the vacuuming of large amounts of slurry or other liquids.

The SUTTNER ST-36 SLUDGE PUMP 6.0 KIT has a large enough pass through casting that will allow items as large as 3/4″ in diameter to easily pass through to the discharge hose. This unit has a liquid ration movement of about 1 to 11, meaning that if you are using a pump that has a 4 gpm rate, you will create an output of about 44 gpm. This item will help with chemical spills in a factory, leaving your pump protected. It can be helpful in flood clean up, emptying large pools, removing the slurry left over in a car wash bay pit and any other run off or clean up you can think of that needs large volumes of liquid moved.

We have other size kits available ( from 4.0 to 6.0) other than the SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, check our website for other dimensions by clicking here. Or you can give us a call anytime and talk to a sludge pump specialist by going to our contact us page here. Or just give us a call directly at Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, simply click here to order it securely on our eCommerce site.

This item does qualify for our everyday sale of 5% off of $50.00, so when you order it be sure to add the coupon code “5off” on the check out page to get additional savings.

October 2, 2017

Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI

The M407 Trigger Gun is a 7 gallon per minute at 4000 PSI spray attachment for your pressure washer. Without a quality trigger gun your pressure washer is all but useless.

M407 TRIGGER GUN is one of the more versatile items on the market today, made with long lasting parts to give your pressure washer years of use. It’s made from very durable plastic and metal parts and has the best internal pieces that are time tested and trusted by the pressure washing community.

The features of this Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI:

Maximum flow of this gun is 7 GPM
Maximum pressure on this unit is 4000 PSI
Maximum temperature that this gun can spray out is 250F.
Inlet port measures 3/8″ FPT
Outlet port has a measurement of 1/4″ FPT

Really not sure what type of gun you need for your pressure washer? Or not sure if this rear entry spray gun will do the trick for you? Give us a call toll free and we will be glad to assist you in picking out the right accessories for your pressure washing needs. Call 1-877-824-7763 {Smart Phones Click to Call}

Or find your pressure washer parts breakdown here and see what the manufacturer recommend.

Ready to purchase the Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI, click here to go to our eCommerce store..

Purchase two of them, and not only do you have a back up, but then your purchase also qualifies for our everyday 5% off sale. Just add the coupon code 5off to the coupon field at check out to get it.

September 29, 2017

3324-2000.85 Hypro Pumps Spray Nozzle .85

The 3324-2000.85 is a .85 spray nozzle from Hypro Pumps for use with many pressure washers on the market today.

This 3324-2000.85 nozzle, sometimes referred to as a gun in the pressure washer industry is made from durable material and is easy to set up and use, giving you hours of up time for you and your pressure washer.

The 3324-2000.85 Spray Nozzle has the following specifications:

Max. pressure: 3000 psi
Max. temp: 300˚F
1/4” (F) NPT inlet
Variable fan pattern, 0˚ to 80˚ fan
Push/pull for pressure adjustment to draw soap
Twist for fan adjustment

Not sure if this 3324-2000.85 Spray Nozzle is the correct unit for your machine? Give us a call toll free and we will be glad to help you figure out the correct nozzle for any pressure washing or spraying need you may have. Call 1-877-824-7763 {Smart Phones Click to Call}

Need help finding other repair parts or kits for your Hypro Pump? Click here and find your pumps repair / breakdown manual to determine the right fix or accessory to get you back to pressure washing.

You can order this 3324-2000.85 Spray Nozzle by clicking here and going to our eCommerce store.

As always if your order is over $50.00 you can get our everyday sale of 5% off by adding the code “5off” in the coupon field before checking out.

September 28, 2017

CAT Pumps – 8210 – Coupler Assembly

This blog is for a CAT Pumps – 8210 flex coupler assembly kit. It has everything you need in it to reduce the space requirements needed for belt driven or gearbox assemblies.

The CAT Pumps – 8210 was designed by CAT to work with 145 TC motors with horse powers up to 3. This assembly also eliminates the need for belt selection, sizing and adjusting to work properly.

CAT Pumps – 8210 – Coupler Assembly has the following specs:

Can adjust from 16.5 mm to 7/8″
The kits compact direct mounting feature reduces space required for belts or gearbox drive assemblies
This item insulates against heat transfer
Special urethane flexible spyder designed for extended life with high temperature and high RPM

Not sure if this coupler assembly is the correct reducing kit for your CAT Pump? Give us a call toll free and a CAT Pump specialist will be happy to assist you with your unit. We are here from 7:30 am to 4:00 pm M-F EST. Call 1-877-824-7763 {Smart Phones Click to Call}

Want to try to determine yourself if this is the correct repair kit? Find your CAT Pump on our breakdown / repair manual page here.

If you are sure the CAT Pumps – 8210 is correct for your pressure washer, you can order it here directly on our eCommerce store.

We may be able to get this unit to you at a better price! Call us before you order! Call 1-877-824-7763 {Smart Phones Click to Call}

The 8210 is priced above $50.00 making it orderable with our 5% off everyday sale at shopetsonline.com. Just use code 5off at checkout to get an additional 5% off your subtotal.

September 25, 2017

LANDA Part # 8.711-293.0 Soap Nozzle Wand.

The LANDA Part # 8.711-293.0 Soap Nozzle Wand, is specifically designed to work with most LANDA pressure washers past and present. It is the perfect pressure washer accessory to make your cleaning jobs go smooth and easy, with or with out soap or chemical.

8.711-293.0 is a wand replacement, that will withstand any cleaning situation you can think of to test it. It connects quickly and easily to your LANDA hot or cold pressure washer.

Not sure if the 8.711-293.0 soap wand for Landa is the right item for your machine? Give us a call toll free and a LANDA specialist will help you determine the right wand for your unit to get you back up and running fast. Call 1-877-824-7763 {Smart Phones Click to Call}

You can also check our LANDA repair / parts breakdown manuals to see if this is the correct replacement wand for your pressure washer by clicking here and finding your units manual.

Ready to order the 8.711-293.0? Do so, easily and safety online at our eCommerce store by clicking here.

Also don’t forget all orders at shopETSonline.com that are over $50.00 are available for a discount. If your order is over $50.00 use the coupon code “5off” at check out to get 5% off!

September 21, 2017

General Pumps Kit 6 – K06 The Piston and Bolt Assembly

K06 also known as General Pumps kit 6 is the complete piston and bolt assembly repair kit for most general pumps on the market today, used on a host of top of the line pressure washers. If you pressure washer is running a general pump, odds are this is the piston bolt kit you need to fix it.

The K06 repair kit contains everything you need to repair three cylinders on your general pressure washer pump.

k06 - kit 6 piston and bolt assembly — k06 – kit 6 piston and bolt assembly

Need to be sure you are ordering the right repair kit for you pump? Find your general pump repair manual (also called a pump breakdown) by clicking here. Once you find your pumps manual look to see if the K06 is the repair kit you need for your cylinders.

The K06 Kit contains the following repair items:

3 O-rings that measure (0.426 x 0.070) part number 90.3585.00
3 of the Washer (M14) part number 96.7286.00
3 Ring (back up) part numbered 90.5067.00
3 of the Washer part number 96.7280.00
3 Screws (plunger) with a part number 47.2195.66

Not sure if this repair kit is the right item for getting you back up and running? Give our General Pump specialist a call and we will be happy to assist you in determining the correct kit for your piston repair. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the K06 repair kit and fix your pump today? Click here to order the item on our eCommerce store.

As always remember that if your order is over $50.00 you can add the coupon code “5off” to get 5% off your subtotal.

September 20, 2017

General Pumps – PULSAR4KHPEZ – UNLOADER

Part # PULSAR4KHPEZ is a General Pumps unloader replacement part that is used on pumps for your pressure washer that require 10.5 gallon per minute flow rate with a maximum pressure rating of 4500 PSI.

This unloader PULSAR4KHPEZ is a trapped pressure type unit, that is used on most General Pumps and pressure washers that use these types of pumps. It is a blue spring type in the PULSAR4 series and comes standard with and EZ start knob and valve.

This PULSAR4KHPEZ unloader has the following specifications:

The maximum GPM is rated at 10.5 GPM.
The unloader is Rated at 4050 PSI.
The Max. PSIof the unit is 4500.
This unloader has an Inlet measurement of 2 x 3/8″ NPT.
Outlet on this unloader is 3/8″ NPT.
Bypass of the unit is measured at 2 x 3/8″ NPT.
The Max. operating temperature of the unloader is 195 Degrees Fahrenheit.

Please check your General Pumps repair manual or parts breakdown here to determine of the PULSAR4KHPEZ unloader is the correct replacement unit for your pressure washer by clicking here and finding your pump model.

Not sure if this is the correct item for your pump and machine? Give us a call toll free and a General Pump Specialist will be glad to assist you in determining the correct unloader for your pump. Call 1-877-824-7763 {Smart Phones Click to Call}

If you are sure the PULSAR4KHPEZ unloader is the correct piece for you pressure washer pump them order it securely by clicking here.

Also, remember that we always offer one of the best coupon codes around that never expires. Use code “5off” to get 5% off any order that is over $50.00.