Category: pressure washer pumps

Posted on

General Pumps – EZ4035G34 Bolt and Go Pump Package

The General Pumps – EZ4035G34 Bolt and Go Pump Package, is a quick kit we have created with the help of general pumps to get your pressure washer up and running as simply and as fast as unbolting the old pump and bolting on this new one.  It is for pressure washers that require 3.5 gpm at 4000 PSI.

This General Pumps – EZ4035G34 Bolt and Go Pump Package has and rpm of 3400 and comes with the unloader, thermal relief valve, garden hose fitting as well as the high pressure quick coupler plug all standard and ready to go.

General Pumps - EZ4035G34 Bolt and Go Pump Package
General Pumps – EZ4035G34 Bolt and Go Pump Package

Here are the technical specification of the General Pumps – EZ4035G34 Bolt and Go Pump Package:

  • Maximum Volume of the pump is  3.5 GPM
  • Maximum Discharge Pressure on this unit is 4000 PSI
  • Maximum Pump Speed of the  unit  is 3400 RPM
  • Bore      measures at 13mm
  • Stroke has a measurement of 11mm
  • Crankcase Oil Capacity is 14 oz
  • Maximum Fluid Temperature of this pump is 165 F
  • Inlet Port Thread measures  1/2″ FPT
  • Discharge Port Thread measures 3/8″ FPT
  • Hollow Shaft I.D is  1″
  • Weight of the  unit is  20 lbs.
  • Dimensions measure  8.8″x9.7″x6.5″

Have you purchased a General Pumps – EZ4035G34 Bolt and Go Pump Package from us before and now want to fix the unit?  Please find the repair manual or parts breakdown by clicking here and then ordering your repair parts and kits with us directly.   You can also call us directly with any questions you may have toll free at:  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to purchase this easy bolt and go pump package?  Click here to order it on our secure eCommerce site.

This pump package does qualify for our everyday sale of 5% off $50.00 or more.  Just add the kit to your shopping cart from the above link and add the code “5off” in the coupon field on the cart page and you will get an additional 5% off the total

Posted on

Annovi Reverberi Pump – GRKV4G35HV-F35

The GRKV4G35HV-F35 pump from Annovi Reverberi is a gas driven 4 gallon per minute at 3500 maximum PSI replacement pump for pressure washers and machines that have these maximum specifications.  The pump spins at 3400 rpm and comes with a 1 inch tapered gas engine flange standard.

This GRKV4G35HV-F35 pump has a head forged from brass and and solid ceramic plungers as well as over sized roller bearing for long life even in the most hostile working environments you can think of.

GRKV4G35HV-F35
GRKV4G35HV-F35

Here are the technical specifications of the GRKV4G35HV-F35 pump:

  • Oil Capacity of this unit is 15.3 oz
  • Maximum Fluid Temperature of the pump is 140° F
  • Inlet Thread measures 1/2” F
  • Discharge Thread has a measurement of  3/8” F

Some other specifications of this unit are:

  • MANIFOLD of the unit is made from High strength forged brass or nickel plated for long term use.
  • BOLTS measurement of  Eight 10mm grade 8.8.
  • PLUNGERS are made of a  special thick solid ceramic for long life, strong durability and more resilience.
  • CRANKCASE is made from Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs.
  • BEARINGS  are Oversized premium tapered roller bearing for maximum life and load distribution.
  • BEARINGS SUPPORTS of this pump are Precision die-cast and machined to assure concentricity and alignment.
  • VALVES, SEATS, AND SPRINGS of the unit are Stainless steel with specially designed Ultra Form cages to provide long life and positive seating.
  • SEALS AND V-PACKINGS  are  Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal.
  • PLUNGER RODS on the unit are High strength stainless steel, for heavy duty use.
  • CONNECTING RODS are formed from Two-piece special alloy aluminum based material, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.
Need to repair this GRKV4G35HV-F35 pump?  Click here to find the pumps breakdown / repair manual.  Can’t find it, or having other site issues?  Give us a call toll free and we will help you out with any questions you may have about gas powered pressure washer pumps. Call 1-877-824-7763 {Smart Phones Click to Call}

If you’re ready to place and order for this pressure washer pump, click here.

This pump does qualify for our everyday 5% off sale.  Just add the coupon code “5off” in the field on your check out page to get an additional 5% off your total.

Posted on

Comet pumps AXD 3522 G pressure washer pump

The AXD 3522 G replacement pressure washer pump from comet pumps can also be identified by its part number of 6501.0008.00.  This pump is used as a replacement on your pressure washers that require a flow rate of 3.5 gallons per minute with a maximum PSI of 2200.

This AXD 3522 G has an RPM of 3400 and will work on most pressure washers purchased at your local hardware or big box store like home depot or lowes.

AXD 3522 G
AXD 3522 G

Pump AXD 3522 G or 6501.0008.00 has the following features:

  • Comes standard with 3/4 FGH Inlet and 3/8 MPT Outlet
  • Built-in Uniflow Unloader and Chemical Injector industry standard
  • Ceramic Plungers for long life and durability
  • Built-in Garden Hose Adapter for easy attachment
  • Industrial Duty Construction for Extended Life
  • Stainless Steel Check Valves
  • Forged Brass Manifold
  • Patent Registered Ball Bearing Design
Pump AXD 3522 G or 6501.0008.00 has the following specifications:
  • A Maximum Volume of 3.3 gpm
  • The pumps Max. Discharge Pressure is 2200 psi
  • This pump has a Maximum Pump Speed of 3400 rpm
  • The Inlet Port Thread measures 3/4 FGH
  • This units Discharge Port Thread measures 3/8 MPT
  • A Shaft Diameter of 3/4 Hollow for connection
  • The weight of this unit is only 12.0 lbs.

Should you already own a Comet pump like this and want to try to repair it, you can find the repair / breakdown manuals by clicking here for all of Comets units.

Need help with any Comet or other pressure washer issues?  Give us a call toll free, we have been in the business longer than the big box stores like home depot or lowes have been and know more about pressure washers than any of their staff.  We have been serving the pressure washer industry since the 1970’s.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the AXD 3522 G or 6501.0008.00 replacement pump for your machine?  You can do so easily and securely by clicking here.

This pump also qulifies for our everyday sale of 5% off all orders over $50.00.  Just use the coupon code of “5off” to get your 5% off.

Posted on

Get into Soft-washing with a COMET P36/10GR DIAPHRAGM PUMP

Get you and your pressure washer working in the soft-washing industry.  Clean houses, businesses, schools and even luxury items like boats and yachts.  Get the comet p36/10GR diaphragm pump to get you into this growing business.

The soft-washing industry is growing by leaps and bounds to remove mold, algae and other microorganism from roofs and siding on homes and businesses.  Be the first pressure washer contractor in your area to get into this great service.

Get into Soft-washing with a COMET P36/10GR DIAPHRAGM PUMP
Get into Soft-washing with a COMET P36/10GR DIAPHRAGM PUMP

This comet P36/10GR diaphragm pump is perfect for soft-washing and has the following specifications:

  • Chemical resistant wet parts
  • Compatible with aggressive soft wash chemicals
  • Hexagonal manifolds for smooth and quiet operation
  • Fits standard engines with 3/4″ keyed shaft
  • Injection molded plastic parts with UV stabilization
  • Secure bracket system to prevent manifold leaks
  • Includes gear box and pressure regulator
  • 3 diaphragms
  • 550 RPM
  • 9.3 GPM maximum
  • 145 PSI maximum
  • 0.9 HP
  • 25.6 lbs.

The Duraphragm technology of this unit extends the life of the diaphragms by shielding them from direct contact with the chemical inlet. This spreads inlet vacuum often caused by a dirty suction filter or kinked hose, across the entire surface of the diaphragm instead of focusing it on one small area where most failures occur.

Not sure what else you need to get into soft-washing as a service, but you own a pressure washer?  Give us a call and we will help you out with everything you need to know about this growing part of the pressure washer industry.  Call 1-877-824-7763 {Smart Phones Click to Call}
Already in the soft-washing industry and need a replacement pump for your machine, click here to order this comet P36/10GR Diaphragm unit for your machine.

Get more info on this type of service by clicking here.

Need to repair your Comet Pump?  Click here to get repair / breakdown manuals of the most common pumps on the market today.

This unit does qualify for our everyday 5% off sale over $50.00!  Just include “5off” on the coupon field at check out to get an extra 5% off this soft-washing pump from Comet.

Save

Posted on

General Pumps TC1802E175 replacement pump

General Pumps TC1802E175 is a replacement pump for your pressure washer that requires a flow rate of 0.50 gallons per minute and a maximum pressure rating of 1500 PSI.

The TC1802E175 pump is a bit more expensive than other pumps with the same flow rate and PSI, but it is made by general pumps and will last a lot longer with less repairs and downtime for your business.

General Pumps TC1802E175 replacement pump
General Pumps TC1802E175 replacement pump

This General Pumps TC1802E175 replacement pump has the following features:

  • The pump has a Forged brass manifold
  • Die cast, anodized aluminum, oil bath crankcase makes for longer life than most pumps.
  • Solid ceramic plungers with continuously lubricated packings add to pumps life
  • The pump has original Interpump unitized, stainless steel, K01 kit inlet and outlet valves
  • This unit is ideal for all general cleanin, RO, and misting applications
  • The pump comes standard with NEMA 56C electric motor mounting flange

The technical specifications are as follows for this pump:

  • Maximum Volume is 0.5 GPM
  • Maximum Discharge Pressure of the pump is 1500 PSI
  • Maximum Pump Speed rotates at 1750 RPM
  • Maximum Inlet Pressure on the unit is 125 PSI
  • Maximum Inlet Vacuum of the pump is 3 ft. water (2.6″Hg)
  • The Bore diameter measures 18mm (.709″)
  • Stroke on this item has a measurement of 2mm (.079″)
  • Crankcase Capacity on this item is 11.2 oz.
  • Maximum Fluid Temperature that can be run through the pump is 165 F
  • Inlet Port Thread measures 3/8″ FPT
  • Discharge Port Thread has a measurement of  1/4″ FPT
  • Shaft Diameter for mounting the pump is 5/8″ (16mm)
Already own a General Pumps TC1802E175 replacement pump, and want to fix it yourself before buying a new one?  Click here to find this units repair / breakdown manual and order parts and kits for a quick DIY fix.
Not sure if the General Pumps TC1802E175 replacement pump is the right pump for you? give us a call toll free and we will be happy to assist you in figuring out the correct unit for your pressure washer. Call 1-877-824-7763 {Smart Phones Click to Call}

Or if you are ready to order the pump and get back up and running do so by clicking here to order fast and secure.

This pump qualifies for our 5% off everyday sale!  Just add the pump to your cart and in the coupon field use code “5off” to get 5% off the purchase price of the pump.

Posted on

RMW2.5G28-EZ-SX pump from Annovi Reverberi

RMW2.5G28-EZ-SX pump from Annovi Reverberi is a vertical style pump that mounts the back of your pressure washer. This pump is rated 2.5 gallons per minute and has a maximum PSI of 2800.  This unit can also be written as RMW25G28-EZ-SX.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi spins at 3400 RPM and is one of the more commonly used pumps on your home improvement or big box store bought pressure washer.  Don’t by a whole new unit from Home Depot or Lowes, repair the one you bought with this great little pump.

RMW2.5G28-EZ-SX pump from Annovi Reverberi
RMW2.5G28-EZ-SX pump from Annovi Reverberi

Please be aware that this RMW2.5G28-EZ-SX pump from Annovi Reverberi is rotated  180 degrees, for mounting under your pressure washer.  Please see your units repair manual to determine if this is the correct mounting for your machine.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi has the the following specifications:\
  • The unit is a Vertical Mount with Gas Flange 3-7 HP
  • Max. Volume on this pump is 2.5 GPM
  • Max. Discharge Pressure of this unit is 2,800 PSI
  • Max. Pump Speed on the RMW SX is 3,400 RPM
  • Shaft Diameter for mounting measures 7/8” Hollow
  • Built In unloader and chemical injector come standard on this pump
  • Built In easy start valve is also standard on this unit.
  • Maximum Horsepower Requirements to work this pump is 6.5 GHP
  • Inlet Port on the unit measures 3/4″ FGH (garden hose)
  • Outlet Port has a measurement of  22mm (Twist Connect)
  • Brass manifold for long life.
  • Stainless steel plungers built to make this pump last.
  • Pump comes filled with oil for quick step up and use.
  • Note: Engine shafts longer that 2” will require spacers or washers found at your local hardware store.
  • Weight of the SX pump is 7.7lb.
The RMW2.5G28-EZ-SX pump from Annovi Reverberi is not recommended to be repaired, as they are easier to replace both in time and money, however if you want to try your hand at DIYing it you can find the pump repair manual and breakdown by clicking here. Having trouble trying to figure out if this is the right unit for your big box store bought pressure washer from Home Depot of Lowes?  Give us a call and we will help you determine the correct replacement pump for your machine.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Place your order on our eCommerce store by clicking here.

As a bonus this pump does qualify for our everyday 5% off sale.  Just use the coupon code “5off” at check out to get 5% off your total order over $50.00

Posted on

GIANT PUMPS – HR3025-111H – Triplex Ceramic Plunger Pump

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps, that is made to be the replacement on your pressure washer that requires a 3 gallon per minute flow rate at a maximum pressure of 2500 PSI.

This HR3025-111H pump can pump water up to 80 degrees making it perfect for almost any cleaning situation you and your pressure washer get into.  Great for cutting grease and dirt from any surface.

HR3025-111H is a triplex ceramic plunger pump from Giant Pumps
HR3025-111H is a triplex ceramic plunger pump from Giant Pumps

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps has the following specifications:

  • Volume on the HR3025-111H is 3.0 GPM
  • Maximum Discharge Pressure of the HR3025-111H is rated at 2500 PSI
  • Maximum Discharge Pressure (HR3030)  is 3000 PSI
  • Maximum Inlet Pressure is Up to 90 PSIG1
  • The RPM of the unit is 3450
  • Plunger Diameter measures at 16mm
  • Stroke of the pump is measured at 5.9mm (8.0 o angle)
  • The Crankcase Oil Capacity is 4.5 fl. oz.
  • Operating Temperature of Pumped Fluids Up to 80 F
  • Inlet Port on this pump measure 1 x 1/2″ NPT
  • The Discharge Ports measure 3/8″ NPT
  • Shaft Rotation is Clockwise
  • Weight of this unit is only 11.4 lbs.
  • Width of the overall pump is 6-7/16″
  • Height on this pump is 10-1/4″
  • Swash Plate Bore of the  HR3025-111H measures 3/4″x3/16″ Keyway
  • Swash Plate Bore of the (HR3030) measures 1″x3/16″ Keyway
  • Valves are made of Polyamide Plastic

Want to fix and already owned pump like this from Giant Pumps?  Go to our repair and breakdown manual page and find this unit or any Current Giant Pump on the market today, to see it’s repair parts and kits by clicking here.

Not sure if the HR3025-111H is the right pump for your machine? Give us a call and a Giant Pump Specialist will be glad to assist you with any questions.  We are here M – F 7:30 am till 4:00 PM EST.  Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order your replacement HR3025-111H pump today?  Click here and order it securely on our eCommerce site.

This unit does qualify for our everyday sale of 5% off $50.00 or more.  At checkout just add the coupon code “5off” into the coupon field to get and extra 5% off this unit, and anything else you order with it!

Posted on

Annovi Reverberi Replacement Pump RQV2.5G24D-EZ

The Annovi Reverberi Replacement Pump RQV2.5G24D-EZ which can also be identified as RQV25G24D-EZ is a horizontal type unit for a pressure washer that requires a flow rate of 2.5 gallons per minute with a maximum PSI rating of 2400.

This RQV2.5G24D-EZ pump spins at 3400 RPM connecting to a 3/4″ shaft and works on a gasoline powered engine. The pump has a built in chemical injection system as well as a pressure control valve.  The unit comes with an EZ start and thermal relief valve standard.

RQV2.5G24D-EZ
RQV2.5G24D-EZ

The RQV2.5G24D-EZ pump has the following Specifications:

  • A Max. Volume flow rate of 2.5 GPM
  • The Max. Discharge Pressure of 2,400 PSI
  • a Max. Pump Speed that spins 3,400 RPM
  • The Shaft Diameter that measures 3/4” Hollow
  • This pump has a Maximum Horsepower Requirement of 5.9 GHP
  • The Inlet Ports are 3/4″ GHA (garden hose)
  • With Outlet Ports that measure 22mm-14 (Twist Connect)
  • The pump weighs in at 6.5 lb.
The features of the RQV2.5G24D-EZ are as follows:
  • 3-Piston alternating volumetric pumps for use on cleaning units
  • Can be directly coupled to gas engine flange
  • Fits most homeowner type horizontal pressure washers
  • Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
  • Pump body in die-cast aluminum alloy
  • Pistons driven by swash plate mechanism
  • Two bearing systems, to support the pump shaft and pistons
  • Pistons in hardened and tempered steel
  • Pump head in aluminum
  • Intake valves fitted above the pistons for greater efficiency
  • Integral regulating valve
  • Integral detergent suction system
Already own a RQV2.5G24D-EZ pump and want to fix it. Click here to find the parts breakdown / repair manual.

Not , sure if this is the correct pump for your pressure washer? Give us a call toll free and an Annovi Reverberi Pump specialist will be glad to help you out.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to get back up and running?  Order the pump here on our eCommerce site.

This pump does qualify for our everyday special of 5% off $50.00 or more.  Simply put the code “5off” in the coupon field at check out and you will get the discount.