Category: pressure washer pumps

Posted on

RMW2.5G28-EZ-SX pump from Annovi Reverberi

RMW2.5G28-EZ-SX pump from Annovi Reverberi is a vertical style pump that mounts the back of your pressure washer. This pump is rated 2.5 gallons per minute and has a maximum PSI of 2800.  This unit can also be written as RMW25G28-EZ-SX.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi spins at 3400 RPM and is one of the more commonly used pumps on your home improvement or big box store bought pressure washer.  Don’t by a whole new unit from Home Depot or Lowes, repair the one you bought with this great little pump.

RMW2.5G28-EZ-SX pump from Annovi Reverberi
RMW2.5G28-EZ-SX pump from Annovi Reverberi

Please be aware that this RMW2.5G28-EZ-SX pump from Annovi Reverberi is rotated  180 degrees, for mounting under your pressure washer.  Please see your units repair manual to determine if this is the correct mounting for your machine.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi has the the following specifications:\
  • The unit is a Vertical Mount with Gas Flange 3-7 HP
  • Max. Volume on this pump is 2.5 GPM
  • Max. Discharge Pressure of this unit is 2,800 PSI
  • Max. Pump Speed on the RMW SX is 3,400 RPM
  • Shaft Diameter for mounting measures 7/8” Hollow
  • Built In unloader and chemical injector come standard on this pump
  • Built In easy start valve is also standard on this unit.
  • Maximum Horsepower Requirements to work this pump is 6.5 GHP
  • Inlet Port on the unit measures 3/4″ FGH (garden hose)
  • Outlet Port has a measurement of  22mm (Twist Connect)
  • Brass manifold for long life.
  • Stainless steel plungers built to make this pump last.
  • Pump comes filled with oil for quick step up and use.
  • Note: Engine shafts longer that 2” will require spacers or washers found at your local hardware store.
  • Weight of the SX pump is 7.7lb.
The RMW2.5G28-EZ-SX pump from Annovi Reverberi is not recommended to be repaired, as they are easier to replace both in time and money, however if you want to try your hand at DIYing it you can find the pump repair manual and breakdown by clicking here. Having trouble trying to figure out if this is the right unit for your big box store bought pressure washer from Home Depot of Lowes?  Give us a call and we will help you determine the correct replacement pump for your machine.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Place your order on our eCommerce store by clicking here.

As a bonus this pump does qualify for our everyday 5% off sale.  Just use the coupon code “5off” at check out to get 5% off your total order over $50.00

Posted on

GIANT PUMPS – HR3025-111H – Triplex Ceramic Plunger Pump

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps, that is made to be the replacement on your pressure washer that requires a 3 gallon per minute flow rate at a maximum pressure of 2500 PSI.

This HR3025-111H pump can pump water up to 80 degrees making it perfect for almost any cleaning situation you and your pressure washer get into.  Great for cutting grease and dirt from any surface.

HR3025-111H is a triplex ceramic plunger pump from Giant Pumps
HR3025-111H is a triplex ceramic plunger pump from Giant Pumps

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps has the following specifications:

  • Volume on the HR3025-111H is 3.0 GPM
  • Maximum Discharge Pressure of the HR3025-111H is rated at 2500 PSI
  • Maximum Discharge Pressure (HR3030)  is 3000 PSI
  • Maximum Inlet Pressure is Up to 90 PSIG1
  • The RPM of the unit is 3450
  • Plunger Diameter measures at 16mm
  • Stroke of the pump is measured at 5.9mm (8.0 o angle)
  • The Crankcase Oil Capacity is 4.5 fl. oz.
  • Operating Temperature of Pumped Fluids Up to 80 F
  • Inlet Port on this pump measure 1 x 1/2″ NPT
  • The Discharge Ports measure 3/8″ NPT
  • Shaft Rotation is Clockwise
  • Weight of this unit is only 11.4 lbs.
  • Width of the overall pump is 6-7/16″
  • Height on this pump is 10-1/4″
  • Swash Plate Bore of the  HR3025-111H measures 3/4″x3/16″ Keyway
  • Swash Plate Bore of the (HR3030) measures 1″x3/16″ Keyway
  • Valves are made of Polyamide Plastic

Want to fix and already owned pump like this from Giant Pumps?  Go to our repair and breakdown manual page and find this unit or any Current Giant Pump on the market today, to see it’s repair parts and kits by clicking here.

Not sure if the HR3025-111H is the right pump for your machine? Give us a call and a Giant Pump Specialist will be glad to assist you with any questions.  We are here M – F 7:30 am till 4:00 PM EST.  Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order your replacement HR3025-111H pump today?  Click here and order it securely on our eCommerce site.

This unit does qualify for our everyday sale of 5% off $50.00 or more.  At checkout just add the coupon code “5off” into the coupon field to get and extra 5% off this unit, and anything else you order with it!

Posted on

Annovi Reverberi Replacement Pump RQV2.5G24D-EZ

The Annovi Reverberi Replacement Pump RQV2.5G24D-EZ which can also be identified as RQV25G24D-EZ is a horizontal type unit for a pressure washer that requires a flow rate of 2.5 gallons per minute with a maximum PSI rating of 2400.

This RQV2.5G24D-EZ pump spins at 3400 RPM connecting to a 3/4″ shaft and works on a gasoline powered engine. The pump has a built in chemical injection system as well as a pressure control valve.  The unit comes with an EZ start and thermal relief valve standard.

RQV2.5G24D-EZ
RQV2.5G24D-EZ

The RQV2.5G24D-EZ pump has the following Specifications:

  • A Max. Volume flow rate of 2.5 GPM
  • The Max. Discharge Pressure of 2,400 PSI
  • a Max. Pump Speed that spins 3,400 RPM
  • The Shaft Diameter that measures 3/4” Hollow
  • This pump has a Maximum Horsepower Requirement of 5.9 GHP
  • The Inlet Ports are 3/4″ GHA (garden hose)
  • With Outlet Ports that measure 22mm-14 (Twist Connect)
  • The pump weighs in at 6.5 lb.
The features of the RQV2.5G24D-EZ are as follows:
  • 3-Piston alternating volumetric pumps for use on cleaning units
  • Can be directly coupled to gas engine flange
  • Fits most homeowner type horizontal pressure washers
  • Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
  • Pump body in die-cast aluminum alloy
  • Pistons driven by swash plate mechanism
  • Two bearing systems, to support the pump shaft and pistons
  • Pistons in hardened and tempered steel
  • Pump head in aluminum
  • Intake valves fitted above the pistons for greater efficiency
  • Integral regulating valve
  • Integral detergent suction system
Already own a RQV2.5G24D-EZ pump and want to fix it. Click here to find the parts breakdown / repair manual.

Not , sure if this is the correct pump for your pressure washer? Give us a call toll free and an Annovi Reverberi Pump specialist will be glad to help you out.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to get back up and running?  Order the pump here on our eCommerce site.

This pump does qualify for our everyday special of 5% off $50.00 or more.  Simply put the code “5off” in the coupon field at check out and you will get the discount.

Posted on

Hypro / Shurflo Pumps – 2088-573-143 Marine unit.

Hypro / Shurflo Pumps – 2088-573-143 Marine unit is a replacement pump with a high flow rate and moderate pressure.  The pump is made to replace marine pumps that require a 4 GPM flow.

 

2088-573-143 pumps are made in a wide array of chemical resistant materials, are versatile enough to be mounted for use in any position and are very easy to repair should you need to fix it.  This pump is also available in a number of voltages, ask us about that when you call. Call 1-877-824-7763

2088-573-143 pump
2088-573-143 pump

This SHURFLO® 2088-573-143 pump has the following specifications:

  • The unit is a Self-Priming pump that is good up to 12 Vertical Feet [3.7M]
  • Being made of Chemically Resistant Materials make this pump long lasting.
  • Automatic Demand on the unit makes for quick start up and work flow.
  • The pump has Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid into the machine.
Not sure if the 2088-573-143 pump is right for your needs?  Give us a call and we will help you determine if this is the correct marine style pump for you.  You can also look over our parts breakdowns / repair manuals here to see if you can fix this unit yourself if you already own it by clicking here. Don’t see your pump call us and we will get you your repair manual.  Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order this 2088-573-143 pump?  You can do so online and safe and securely on our site by clicking here.  Also don’t forget to use our coupon code at check out.  It’s always valid on purchases of $50.00 of more.  Just enter the code “5off” on your cart page to get a 5% discount on the subtotal as long as the total purchase price is over $50.00.
Posted on

RMV2.5G30D pump from Annovi Reverberi

RMV2.5G30D replacement pressure washer pump from Annovi Reverberi.  This pump is for repair of pressure washers that  have a flow rate of 2.5 gallons per minute and a maximum rating of 3000 PSI.  The unit spins at a industry standard of 3400 RPM.

The RMV2.5G30D can connect to a direct drive system of a gas powered pressure washer that has a mounting shaft size of 3/4″. The pump is equipped with a built in chemical injector and has an installed pressure control valve all standard, making it the perfect replacement pump for most home pressure washers on the marked today.

RMV2.5G30D replacement pressure washer pump
RMV2.5G30D replacement pressure washer pump

 

The Rmv2.5G30D has the following specifications:

  • The pump features a 3/4″ hollow shaft and operates at 3400 RPM, with a max PSI of 3000.
  • This unit has a Max Flow (in GPM) of  2.5
  • The Max Flow (in L/Min) is 9.5
  • The pump has a Max Bar of 200
  • Power of this unit in EBHP is rated at 4.3
  • This pump has a Bore Diameter of 12mm
  • Stroke on this unit is  9.7mm
  • Crankshaft has an ID Stamp of 1
Check your pressure washer, you might already have an RMV2.5G30D installed on it.  If this is the case and it has stopped working you may be able to repair this pump yourself.  You can find the pumps breakdown / repair manual by clicking here.  Or if you are not sure if this is the pump you have installed but want to try to fix it before you replace it you can find all the Annovi Reverberi Pump Breakdowns / Repair Manuals here.
Still not sure if you own or even can use a RMV2.5G30D pump?  Just give us a call and we will be more than happy to assist you in figuring out what you have and what will work best for your pressure washer. Call us toll free at Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Do so by clicking here to order securely on our eCommerce site.  Don’t for get to use coupon code 5off at checkout on all orders over $50.00 to get an additional 5% off!!

Posted on

Hypro Pumps – 8090-802-270 Diaphragm Pump

The 8090-802-270 is a diaphragm pump from Hypro Pumps that is used for replacing a non working pump that has a 30 maximum PSI rating, at 180 degrees working temperature maximum.

This 8090-802-270 unit is self priming and weights in at only 4.7 pounds.  It’s typical use is for soil extraction and has an rating of 80 PSI in bypass mode.

 

8090-802-270 Pump
8090-802-270 Pump

The fasteners are made of zinc plated steel, and the valves are of the strongest viton making this 8090-802-270 Pumps durable both inside and out. Intermittent cycling and the 230 voltage rating make this unit one of the more versatile diaphragm pumps on the market today.

If you are not sure if the Shurflow 8090-802-270 Pump is the right unit for your machine, you can give us a call here toll free and we will help in assisting you with getting the right diaphragm pump for your needs. Call 1-877-824-7763

Are you a DIYer? If so you can find most pump breakdowns / repair manuals for Hypro and Shurflow by clicking here and finding your unit and ordering parts to repair it, instead of replacing it with a new one. Although, we would recommend just purchasing a new one most of the time, as the hours spent on assembling and disassembling the unit to repair it could extend your down time.

Ready to order a new one, call us above or order it securely online by clicking here: 8090-802-270 Pump

Posted on

Hypro Pumps – 5315C-X the 5300 SERIES PUMP Assembly

This post is for the 5315C-X which is made from Hypro Pumps and is in there 5300 series of pressure pumps for sprayers.  This assembly is designed for long life and will get your sprayer up and running fast.

The 5315C-X pump is rated for sprayers that need a flow rate of 1.5 gallons per minute and a maximum pressure of 500 PSI.  It is also recommended for units that spin at no more that 1800 RPM.

5315C-X
5315C-X Pump from hypro pumps.

 

Hypro Pumps 5315C-X has the following technical specifications:

  • The pump has a 1.5 MAX GPM
  • 500 is the MAX PSI for this 5315C-X
  • This unit spins at an 1800 MAX RPM
  • The pump is made from cast iron for durability.
  • The unit has a 5/8″ OD SOLID SHAFT for mounting
  • This unit has 1/2″ NPT PORTS for inlet and outlet.
  • 140 DEGREES F is the maximum operation temperature for this pump.
  • The pump has a leather cup.
If you already own a 5315C-X pump and need to fix it, you can find the breakdown / repair parts manual by clicking here.  Or if you are not sure if this is the correct sprayer for your unit you can find all hypro pumps breakdowns here or as always give us a call toll free by dialing or clicking the phone:  Call 1-877-824-7763
Parts Breakdown / Repair Manual
Parts Breakdown / Repair Manual

These pumps are perfect for non abrasive or general chemical spraying situations, the body is made of cast iron with the inside valves and parts being made of stainless steal. It also has leather reinforced seals making this perfect to get you back up an spraying for a long time.

Ready to order this unit for your sprayer or pressure pump?  Please either call us at the number above or you can order it securely on our eCommerce site by clicking the link here: 5315C-X
Posted on

Comet Pumps – 6305.1800.00 PUMP also called the ZWD 4035 G

This is information for the Comet Pump 6305.1800.00 PUMP also called the ZWD 4035 G.  This pump is for pressure washers that have a flow rate of 4.0 GPM and a maximum pressure of 3500 PSI.  This unit is for machines that spin at 3400 RPM.

The 6305.1800.00 PUMP also called the ZWD 4035 G is a replacement pressure washer pump that mounts to a gas engine and has a reversible crankshaft that allows it to be connected to either a right or left hand mounting system.

6305.1800.00 PUMP also called the ZWD 4035 G
6305.1800.00 PUMP also called the ZWD 4035 G

6305.1800.00 PUMP also called the ZWD 4035 G has the following specifications:

  • The zwd 4035 G has a Maximum Volume of 4.0 gpm
  • This pump has a Max. Discharge Pressure of 3500 psi
  • 6305.1800.00 also has a Maximum Pump Speed 3400 rpm
  • The Inlet Port Thread of this pump is 1/2 FPT
  • This unit has a Discharge Port Thread of 3/8 FPT
  • The zwd 4035 G has a Shaft Diameter of 1″ and is  Hollow
  • Pistons on the 6305.1800.00 are 15mm
  • Weight of this unit is 16.5 lbs.
Some other features of the 6305.1800.00 PUMP also called the ZWD 4035 G are that the unit has:
  • 1/2 FPT Inlet — 3/8 FPT Discharge
  • Anodized, Die-Cast Aluminum Crankcase
  • Solid Ceramic Plungers
  • Stainless Steel Check Valves
  • Buna-Textile V-Packings

 

If your pressure washers pump has stopped working and you need a new one with the above specifications this 6305.1800.00 PUMP also called the ZWD 4035 G is a very good and reliable pump to purchase. If you are not sure if this unit is correct or will work on your machine, give us a call and we will be happy to help you figure out the best item to get you back up and pressure washing fast.  Call 1-877-824-7763

Do you already own a 6305.1800.00 PUMP also called the ZWD 4035 G? And need to repair it?  Just click here to get the breakdown / repair manual for your unit.

 

Want to order this unit just click here and you can order it securely on our e-commerce site.

Posted on

Annovi Reverberi RMW22G24-PKG replacement pump package.

This blog is for the RMW22G24-PKG, from Annovi Reverberi.  It’s a pump package built to be your replacement unit for your pressure washer that needs to have a flow rate of 2 gallons per minute with a maximum PSI of 2400.  This pump runs at 3400 RPM, which is the industry standard.

The RMW22G24-PKG was put together by Annovi Reveberi, so home owners and contractors alike could fix their pressure washers quickly and easily with out having to order a bunch of separate parts.  This pump package has everything you need in it to replace your units pump and get back up and running fast.

RMW22G24-PKG pump package from Annovi Reverberi
RMW22G24-PKG pump package from Annovi Reverberi

 

RMW22G24-PKG has the following specifications:

  • Max GPM 2
  • Max PSI 2400
  • RPM 3400
  • Shaft Size 7/8″
  • Pump RMW22G24-EZ
  • Flange Vertical Gas Engine Flange
  • Thermal Relief Valve TPP140-1/4A
  • Detergent Tube w/Filter AR1269120
  • Applications EZ Start Valve
If you are not sure if the  RMW22G24-PKG is the correct kit for your pressure washer, you can give us a call Monday – Friday EST 7:30 am until 4:00 pm and one of our Annovi Reverberi pump specialists will be glad to assist you with any questions you may have.  Call 1-877-824-7763
On the contrary, if you already own a RMW22G24-PKG and need to repair it we have you covered there too.  You can find your units parts breakdown / repair manual here and get all the repair parts you may need to save you time and money of replacing the entire pump.  Not sure if you have and RMW pump?  Click here to see all out breakdowns for AR pumps and find the one you need.

This kit comes with the following Annovi Reveberi items:

  • RMW22G24D (also know as RMW2.2G24D) – Pump
  • TPP140-1/4A – Thermal Relief Valve
  • AR1269120 – Detergent Tube with Filter

Ready to order?  Just give this link a click and you can order the pump securely on our e-commerce site. RMW22G24-PKG

Save

Posted on

LANDA Pump 8.921-713.0 rated 6 GPM at 3600 PSI

The LANDA Pump with a part number of 8.921-713.0 is a replacement unit for LANDA Pressure washers that use a pump with a flow rate of 6 gallons per minute and a maximum output pressure of 3600 PSI.  The unit spins at the industry standard of 1450 RPM.

This 8.921-713.0 pump is an original OEM unit made specifically for their pressure washers, and is the first choice when your machine stops building pressure to pump.

8.921-713.0 pump
8.921-713.0 pump

Some technical specifications on this 8.921-713.0 pump are:

  • The unit has a flow rate of 6 GPM.
  • This pump has a maximum PSI of 3600.
  • The rpm of this unit is 1450.
A few more details about the 8.921-713.0 are:

 

  • Landa’s unique design that delivers the same performance as other pumps but at 10% lower RPM.
  • 10% lower RPM than comparable pumps
  • Durable ceramic plunger with mirror finish
  • Unique snug-fit design for heavy-duty valves
  • Stronger crankcase with cooling fins and thicker mounting feet
  • Extra-large European made tapered roller bearings for longer life
  • Larger oil level sight glass
  • Specially die cast connecting rods for quieter operation and longer pump life
  • U-seals which allow for up to 185°F inlet water for hot water cleaning, significantly reduce pump maintenance and extend pump life
  • Tighter piston rod tolerance for reducing wear and maximizing performance
  • Multi-viscosity pump oil for better lubrication and cooler operation
  • New and improved check valves for quieter operation and longer valve life

 

As always, if you’re not sure if this is the correct unit for your machine, you can give us a call and we will be happy to assist you in figuring out if this is the correct item to get you up and running fast. Call 1-877-824-7763

You can also check your pressure washers manual here to determine if the pump is the one needed for your pressure washer by finding the breakdown / repair manual of your unit here.

If you are sure this is the correct pump you can order it fast and easily by clicking here: 8.921-713.0