AR Annovi Reverberi Pressure Washer Pump CWX18.10N

Spotlight on the AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump).

AR Annovi Reverberi Pressure Washer Pump CWX18.10N 4.75 GPM @ 1450 PSI, Car Wash Pump.

CWX18.10N Industrial triplex car wash pumps a perfect marriage with any vehicle wash system. Belt-driven or direct-drive pumps are specially designed for the purpose of Car Wash equipment and Car Wash supply. Specially designed seals, huge connecting rods, super thick ceramic plungers, premium bearings and forged brass manifold (with a lifetime warranty) insure the pump will give years of continuous, trouble free service. AR heavy-duty CWX18.10N car wash pumps provide low maintenance and allow service to be quick and affordable.

The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump)Features:

Manifold : High strength forged brass for long term use
Bolts : Eight 10mm grade 8.8
Plungers : Special thick solid ceramic for long life, strong durability and more resilient
Crankcase : Precision die-cast, large cooling fins and anodized for the maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs
Bearings : Over sized premium tapered roller bearing for maximum life and load disbursement
Bearing Support : Precision die cast and machined to assure concentricity, alignment and strength
Valves, Seats and Springs: Stainless steel with specially designed ultra form cages to provide long life and positive seating
Seals and U-Packing : Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal
Plunger Rods : High strength stainless steel, for heavy duty use
Connecting Rods : Two piece special alloy aluminum based material, over sized for maximum strength, load disbursement, and long life. Heavy pin construction, for added load strength

The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump) has the following specifications:

Max GPM………………4.75
Max LMP…………………………18
Max PSI………………….1450
Max Bar………………………….100
Power EBHP……………5
Bore Dia. mm…………………….20
Stroke mm……………….16.6
Weight Lbs………………………..32
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………3/4”F
Discharge Thread……………….3/8”F

Items NOT INCLUDED with your Pressure Washer Pump CWX18.10N that you may need:

The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)

PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.

The INLET WATER FILTER will catch most small debris before it enters your pump

The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer

The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!

PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

The Pressure Washer Pump CWX18.10N not the right car wash pump? Click the link to see all our car wash pumps at shopetsonline.com.

List Price: $1,350.00
Our Price: $905.86 Click the link to order the Pressure Washer Pump CWX18.10N
You save $444.14!

Availability:: available for order
Product Code: CWX18.10N
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS Pressure Washer Pump CWX18.10N – 5/2/2012.

April 25, 2012April 25, 2012

GIANT PUMPS – GXRH2224-111 – Triplex Plunger Pump

Spotlight on the GIANT PUMPS – GXRH2224-111 – Triplex Plunger Pump.

GIANT PUMPS – GXRH2224-111, GXRH PUMP,2.2GPM@2400PSI@3450RPM

The GXRH2224-111 Features

GXRH2224-111– 2.2 GPM @ 2400 PSI
Maximum Inlet Pressure -Up to 90 PSIG1
RPM – 3450
Plunger Diameter – 16mm
Stroke GXRH2224-111 – 4.7mm (6.1 o angle)
Crankcase Oil Capacity – 4.7 fl. oz. (4.1 fl.oz. horizontal)
Temperature of Pumped Fluids – Up to 80 oF
Inlet Port – 1/2″ NPT
Discharge Ports – 3/8″ NPT
Shaft Rotation – Either Direction2
Weight – 9 lbs.
Width – 8.325″
Height – 6.45″
Swash Plate Bore (Horizontal) – 3/4″ x 3/16″ Keyway
Swash Plate Bore (Vertical) – 7/8″ x 3/16″ Keyway
Valve Type – Polyamide Plastic
1 A 25 PSIG minimum inlet pressure is required.
2 The pump itself can be driven in either direction of rotation; however, the cooling fan
on TEFC motors must always be positioned so that the cooling air is drawn from the
non-drive end of the motor towards the pump.

Is this GXRH2224-111 – Triplex Plunger Pump not the right pump? Click the link to see all our Pressure Washer Pumps from GIANT PUMPS.

List Price: $270.00
Our Price: $207.77 Click the link to order this GXRH2224-111 Giant Pump.
You save $62.23!
Availability:: available for order
Product Code: GIANT-GXRH2224-111
Price subject to change. Price valid on this GXRH2224-111 pressure washer Giant Pump 4/25/2012

April 20, 2012

CAT Pump 3560 – 35 Frame Plunger Pump

Spotlight on the CAT Pump 3560 – 35 Frame Plunger Pump.

CAT Pump 3560 – 35 Frame Plunger Pump, DS, w/Side Gauge, 20/4000, 1160 RPM or 25/3000, 1450 RPM, SS/SS-Valves.

• The CAT Pump 3560 has a Triplex design that delivers high efficiency and low pulsation.
• Durable dual V-Packings are lubricated and cooled by pumped liquid.
• Pre-set Lo-Pressure Seals on the CAT Pump 3560 provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Specially formulated Seals and V-Packings on this CAT Pump 3560 offer unmatched performance and extended life.
• Wet-end easily serviced without entering crankcase.

CAT Pump 3560 – 35 Frame Plunger Pump Features:

Flow*…………………………………………………………….20 gpm (76 l/m)
Pressure Range*…………………………….100 to 4000 psi (7 to 275 bar)
Inlet Pressure Range…………………..Flooded to 70 psi (Flooded to 4.9 bar)
RPM…………………………………………………………..1160 rpm (1160 rpm)
Bore……………………………………………………………….. 0.984” (25 mm)
Stroke………………………………………………………………1.890” (48 mm)
Crankcase Capacity……………………………………..4.2 Qts. (4 L)
Maximum Liquid Temperature …………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Inlet Ports (2)………………………………………..1-1/2” NPTF (1-1/2” NPTF)
Discharge Ports (2)……………………………………..1” NPTF (1” NPTF)
Pulley Mounting……………………………………Either Side (Either Side)
Shaft Diameter…………………………………………….. 1.378” (35 mm)
Weight………………………………………………………….142 lbs. (64.4 kg)
Dimensions…………………………..23.54 x 18.11 x 9.88” (598 x 460 x 251 mm)
*Contact Cat Pumps for continuous duty applications.

This not the right CAT Plunger Pump? Click the link to see all our CAT Pumps from ETS Company.

CAT Pump 3560

Data Sheet

Service Maual

Our Price: $8,585.00 Click the link to order this CAT Pump 3560 Pressure Washer Pump.
Call 1-877-824-7763 for a Better Price we can’t post online!!
Availability:: Available for Order
Product Code: 3560
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 3560 PRESSURE PUMP 4/20/2012

April 19, 2012

AR Annovi Reverberi Pressure Washer Pump RMW25G25-PKG

Spotlight on the AR Annovi Reverberi Pressure Washer Pump RMW25G25-PKG.

AR Annovi Reverberi Pressure Washer Pump RMW25G25-PKG Features:

RMW25G25D – Pump
Max PSI: 2500
Max GPM: 2.5
RPM: 3400
7/8″ Hollow Shaft
Vertical Gas Engine Flange
TPP140-1/4A – Thermal relief valve
AR1269120 – Detergent tube with filter

Is this Annovi Reverberi RMW25G25-PKG not the right Pressure Washer Pump Package? Click the link to see all our Pressure Washer Pump Packages from AR Annovi Reverberi.

List Price: $323.87
Our Price: $206.38 Click the link to order this AR Pressure Washer Pump RMW25G25-PKG from Annovi Reverberi.
You save $117.49!
Availability:: available for order
Product Code: RMW25G25-PKG
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS RMW25G25-PKG – 4/19/2012

April 16, 2012

AR Annovi Reverberi Pressure Washer Pump RMV25G24-PKG

Spotlight on the AR Annovi Reverberi Pressure Washer Pump RMV25G24-PKG.

This AR Annovi Reverberi Pressure Washer Pump RMV25G24-PKG Features:

RMV25G24 – Pump
Max PSI: 2500
Max GPM: 2
RPM: 3400
3/4″ Hollow Shaft
EZ start valve
Gas Engine Flange
TPP140-1/4A – Thermal relief valve
AR1269120 – Detergent tube with filter

Not the right pump package from Annovi Reverberi? Click the link to see all out AR Annovi Reverberi Pump Packages.

List Price: $258.94
Our Price: $166.41 Click the link to order the AR Annovi Reverberi Pressure Washer Pump RMV25G24-PKG
You save $92.53!
Availability:: available for order
Product Code: RMV25G24-PKG
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE RMV25G24-PKG – 4/16/2012

April 12, 2012

CAT Pump 5K112WT3 – Stainless Steel End-Suction Centrifugal Pump

Spotlight on the CAT Pump 5K112WT3 – Stainless Steel End-Suction Centrifugal Pump.

CAT Pump 5K112WT3 – Stainless Steel End-Suction Centrifugal Pump 1HP Three Phase, 56 Frame, 18.5 GPM, 56 PSI, 1-1/4″x1″ NPT Ports, INCL 5K112,899173.

• The CAT Pump 5K112WT3 has a 304SSL liquid-end construction o that offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Back pullout design of the CAT Pump 5K112WT3 permits easy repair of impeller and seal.
• High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.
• Under casing foot mount and center line discharge on the CAT Pump 5K112WT3 reduces misalignment and assures self-venting.
• Close coupled, motorized packages for compact and easy installation.
• Durable Noryl/Fiberglass Diffuser.

The CAT Pump 5K112WT3 – Stainless Steel End-Suction Centrifugal Pump Features:

Flow Range ……………………………………..1.5 to 18.5 GPM
Pressure Range …………………………………………..27 to 82 PSI
………………………………….63 to 190 Ft. Head
Max. Suction Lift ………………………………………………….25 Feet
Max. Working Pressure …………………………………………………..85 PSI
RPM ……………………………………………..3450 RPM
Inlet Fitting All Models……………………………..1.25″ NPTF
Discharge Fitting All Models………………………………….1″ NPTF
Horsepower Range ……………………………………………….1 to 2 HP
Motor Options 56J Frame TEFC Class F
1.0HP…………….115/208-230V, 1 PH, 60 HZ
2.0HP…………….115/208-230V, 1 PH, 60 HZ
1.0HP…………….208-230/460V, 3 PH, 60 HZ
2.0HP…………….208-230/460V, 3 PH, 60 HZ
Cycle ……………………………………………………60 HZ
Max. Temperature* Continuous ………………………………….. 113°F
Weight (Pump Only) ……………………………………………….8.95 Lbs.
Dimensions Pump Only (see chart)……………7.63 x 8.19″
*Contact CAT PUMPS for applications above 113°F.

This not the right CAT PUMP? Click the link to see all CAT Pumps from ETS Company.

Our Price: $1,150.00 Click the link to order this CAT Pump 5K112WT3.
Call 1-877-824-7763 for a Better Price
Availability:: Available for Order
Product Code: 5K112WT3
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 5K112WT3 – 4/12/2012

April 2, 2012

KE Series Pressure Washer Pumps from General Pumps Replace – old EK Series General Pumps

The KE Series Pressure Washer Pumps from General Pumps replaces all old EK Series Pressure Washer Pumps from General Pumps.

KE Pressure Washer Pump from General Pumps

KE Series Pressure Washer Pumps from General Pumps FEATURES:

• A “New Generation” Pump
• Triplex Plunger Pump, available in 5 flows
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication
• SAE-B hydraulic drive bell housing and flexible couplers available

KE series pressure washer pump from General Pumps

KE Series Pressure Washer Pumps from General Pumps MATERIALS:

• High resistance light alloy die cast aluminum crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special antifriction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves
• Pumps are also available with 316 SS packing components.
These models use prefix “KEN”

KE Series Pressure Washer Pumps from General Pumps COMMON SPECIFICATIONS:

• Maximum Inlet Pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 PSI
• Maximum Fluid Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *140° F
• Inlet Port Thread: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1″ NPT-F
• Discharge Port Thread: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2″ NPT-F
• Shaft Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.181″/30 mm
• Stroke: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9055″/23 mm
• Pump Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.2″ x 13.4″ x 7.7″
• Crankcase Oil Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . 67.63 oz. (2 liters)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (use GP Series 220 Oil)
• Shipping Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 lbs./40 kg
*Please consult technical guide or GP Sales Representative for
Temperature/Inlet Pressure Information.

KE Series Pressure Washer Pumps from General Pumps PUMP OPTIONS:

• “F” version features flushing option
• “G” version suitable for pumping high-temperature glycols (up to 140o F)
• “N” version available with 316 Stainless Steel packing components, maximum water
temperature 185oF
• SAE-J 744-B hydraulic drive bell housing and flexible couplers available.

Click the link to see all our KE Series Pressure Washer Pumps from General Pumps at ETS Company.

March 26, 2012

2012 CAT Pumps Pressure Washer Pump Manuals

Need a breakdown or service manual for CAT Pumps Pressure Washer Products?

We just updated all our service manual and pump breakdowns for CAT Pumps. Click the link to see the 2012 CAT Pumps Line of Pressure Washer Manuals.

ALL ACTIVE 2012 CAT PUMPS FOR ALL YOUR PRESSURE WASHER NEEDS

CALL 1-877-824-7763 for all your CAT PUMP Needs. OR ORDER ONLINE – CLICK THE Link CAT PUMPS

Click the link for all the active CAT Pump Data Sheets (DA) and Service Manuals (SM).

Don’t see your CAT Pump Manual click the links to check 2010 CAT Pump Manuals or Obsolete CAT Pump Manuals OR give us a CALL 1-877-824-7763

March 23, 2012

AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7

Spotlight on the AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7.

BOLT-N-GO SPECIAL! INCLUDES THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! SHIPS WITH MANUAL TOO!

ANNOVI REVERBERI SJV3G27, D Version 3/4″ Hollow Shaft great for most 5 and 5-1/2 hp gas engines with straight shaft! For parts just enter any part number on this breakdown in our search box for pricing and availability. SJV PARTS LIST

Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M

SPECIAL NOTE: Use only AR64545 (click link to view/purchase oitl) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

This AR SJV3G27D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.

The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 Features:

MANIFOLD: High strength forged brass for long term use.
BOLTS: Three 10mm grade 8.8.
PISTONS: Ceramic coated stainless steel for longer pump life in harsh environments.
CRANKCASE: Precision die-cast, large cooling fins for maximum heat dissipation. Sight glass, fill and drain plugs.
BEARINGS: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages provide extra long life and positive seating.
SEALS AND V-PACKINGS: Continuously lubricating for extended life.
UNLOADER: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.

The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 has the following specifications:

Max GPM………………3
Max LMP…………………………11.4
Max PSI………………….2700
Max Bar………………………….186
Power EBHP……………5.2
Bore Dia. mm…………………….15
Stroke mm……………….6.8
Weight Lbs………………………..11
Max Temp……………….140°
Oil Capacity………………………4.5oz
Inlet Thread ……………1/2”M
Discharge Thread……………….3/8”M

NOT THE RIGHT AR ANNOVI REVERBERI PRESSURE WASHER PUMP? Click the link to see more Annovi Reverberi Pressure Washer Pumps from ETS Company.

List Price: $524.94
Our Price: $258.63 Click the link to order the SJV3G27D-F7 Pressure Washer Pump.
You save $266.31!

Availability:: available for order
Product Code: ARWP-RTR-SJV3G27D-F7
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE SJV3G27D-F7 – 3/23/2012

March 21, 2012

CAT Pump 42HS – 5 Frame Plunger Pump

Information on the obsolete CAT Pump 42HS – 5 Frame Plunger Pump.

CAT Pump 42HS – 5 Frame Plunger Pump, 4.5GPM, 2000PSI.

• Triplex plunger design on the CAT Pump 42HS gives smoother fluid flow.
• High pressure seals are completely lubricated and cooled by the fluid being pumped.
• The CAT Pump 42HS has Inlet and discharge valve assemblies interchange for easier maintenance.
• Lubricated low pressure seal provides double protection against external leakage.
• The CAT Pump 42HS has an Oil bath crankcase assures optimum lubrication.
• Close tolerance concentricity of the ceramic plunger maximizes seal life.
• The CAT Pump 42HS can have an Optional Gearbox or Flexible Coupling version for direct mounting to gas engine.

The CAT Pump 42HS – 5 Frame Plunger Pump has the following Features:

MODEL 42HS
Volume ………………………………………….4.5 GPM (17 L/M)
Dchg. Pressure ……………………….100 to 2000 PSI (7-140 BAR)
RPM ……………………………………………3600 RPM (3600 RPM)
Bore…………………………………………………..0.630″ (16 mm)
Stroke………………………………………………..0.335″ (8.5 mm)
Maximum Inlet Pressure ……..Flooded to 60 PSI (0.35 to 4 BAR)
Crankcase Capacity …………………………….18 oz. (0.55 L)
Maximum Fluid Temperature ………………..160°F (71°C)
Inlet Ports (2) ………………………………….1/2″ NPT (1/2″ NPT)
Discharge Ports (2)………………………….3/8″ NPT (3/8″ NPT)
Shaft Diameter……………………………………0.787″ (20 mm)
Weight ……………………………………………20.9 lbs. (9.5 kg)
Dimensions………………………..12.0″x 8.35″x 5.5″ (304.5 x 212 x 139 mm)

Click the link for more information on the CAT PUMP 42HS – 5 Frame Plunger Pump.

Not the right CAT PUMP? Click the link for all the CAT Pressure Washer Pumps from ETS Company.

Call 1-877-824-7763 For Better Deals that we can’t list online

If you already have a Cat Pumps model number that you need to find price and availability on, just enter the model number into our search box. Please call Toll Free for volume & re-sale AND OTHER GREAT discounts WE CAN’T LIST ONLINE at 1-877-824-7763! Any other questions just give us a call!

For CAT Pump Manuals Click The Link CAT PUMP MANUALS