Spotlight on the AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm).
AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm)
This RMV2.5G24D-(Alm) plunger pump will pump up to 2.5 GPM at 2400 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 – 5.5 HP engines. The hollow shafted RMV2.5G24D-(Alm) pump includes a built-in pressure control valve, and chemical injection system.
The AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm) Features:
Manifold: High strength forged brass for long term use.
Bolts: Three 6mm cadmium plated steel.
Plungers: Hardened stainless steel.
Valves: Stainless steel poppet, seat and cage, stainless steel spring.
Seals: Buna-N dual seals.
Bearings: Premium oversized ball and needle bearings.
Crankshaft: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
The AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm) has the following specifications:
List Price: $189.40 Our Price: $123.59 Click the link to order this RMV2.5G24D-(Alm) Pressure Washer Pump. You save $65.81!
Availability:: available for order Product Code: RMV2.5G24D-(ALM) Price subject to change. Price valid on this RMV2.5G24D-(Alm) – 5/10/2012
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJW3G25D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJW3G25D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Specifications:
Max GPM………………3
Max LMP…………………………11.4
Max PSI………………….2500
Max Bar………………………….170
Power EBHP……………5
Bore Dia. mm…………………….15
Stroke mm……………….6.8
Weight Lbs………………………..11
Max Temp……………….140°
Oil Capacity………………………4.5oz
Inlet Thread ……………1/2”M
Discharge Thread……………….3/8”M
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Features
Manifold of the SJW3G25D-F27:
Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
Bolts: Three bolts, 10mm, grade 8.8.
Valves for the SJW3G25D-F27:
Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps on the SJW3G25D-F27: Machined brass for greater strength.
Packing and Plungers:
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides for this SJW3G25D-F27: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All SJW3G25D-F27 pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Is this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 not the right Annovi Reverberi Pump? Click the link to see more Annovi Reverberi Pumps from Shopetsonline.com
List Price: $484.10 Our Price: $305.01 Click the link to order the SJW3G25D-F27 You save $179.09! Availability:: available for order Product Code: SJW3G25D-F27 Price subject to change. Price valid on this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 – 5/9/2012
Spotlight on the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP.
UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP
The UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP Features:
1.6/3 GPM
220 PSI
1450 RPM
WITH REGULATOR
MAX TEMPERATURE 140 DEGREES F
2 DIAPHRAGMS, SEMI-HYDRAULIC
MATERIALS – POLYPROPYLENE
PUMPS SHAFT ROTATION – CW & CCW
REPLACEMENT PUMP FOR 12V OR 110V MOTOR
IS the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP not the right PUMP? Click the link to see all our UNICO Pumps at shopetsonline.com.
List Price: $574.11 Our Price: $539.70 Click the link to order the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP You save $34.41! Availability:: available for order Product Code: UNICO-6127001300 Price valid on the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP 5/8/2012. Price subject to change.
Spotlight on the CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump.
CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump
The CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump Features:
Most widely used pump in the touch-less car wash industry
Forged brass manifold with exclusive lifetime warranty
High flow applications
Dual manifolds utilizing a common crankcase for efficient performance
Solid ceramic plungers with continuously lubricated packings
Unitized stainless steel inlet and discharge valves
Bronze connecting rods for maximum life
Six Cylinder Car Wash Pump
CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump
The CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump has the following specifications:
Maximum Volume: 41 GPM
Maximum Discharge Pressure: 1500 PSI
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1000 RPM
Minimum Horsepower Requirements: 42 bhp (63.1 hp for gas engines)
Bore: 1.417″ (36mm)
Stroke: 1.102″ (28mm)
Crankcase Capacity: 71 oz. Non detergent SAE 30W oil
Maximum Fluid Temperature: 165 Degrees F.
Inlet Port Thread: 1″ FPT
Discharge Port Thread: 3/4″ FPT
Shaft Diameter: 1.378″ (35mm)
Dimensions: 22.1″ x 14.0″ x 9.7″
Weight: 156.7 lb.
Lubrication: fill crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Is the CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump not the right Car Wash Pump? Click the link to see more car wash pumps from ETS.
List Price: $7,891.86 Our Price: $6,072.79 Click the link to order the CW1541 Car Wash Pump. You save $1,819.07!
Availability:: available for order Product Code: BAPL-3109 Price subject to change. Price valid on the cw1541 Car wash pump 5/4/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump).
AR Annovi Reverberi Pressure Washer Pump CWX18.10N
AR Annovi Reverberi Pressure Washer Pump CWX18.10N 4.75 GPM @ 1450 PSI, Car Wash Pump.
CWX18.10N Industrial triplex car wash pumps a perfect marriage with any vehicle wash system. Belt-driven or direct-drive pumps are specially designed for the purpose of Car Wash equipment and Car Wash supply. Specially designed seals, huge connecting rods, super thick ceramic plungers, premium bearings and forged brass manifold (with a lifetime warranty) insure the pump will give years of continuous, trouble free service. AR heavy-duty CWX18.10N car wash pumps provide low maintenance and allow service to be quick and affordable.
The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump)Features:
Manifold : High strength forged brass for long term use
Bolts : Eight 10mm grade 8.8
Plungers : Special thick solid ceramic for long life, strong durability and more resilient
Crankcase : Precision die-cast, large cooling fins and anodized for the maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs
Bearings : Over sized premium tapered roller bearing for maximum life and load disbursement
Bearing Support : Precision die cast and machined to assure concentricity, alignment and strength
Valves, Seats and Springs: Stainless steel with specially designed ultra form cages to provide long life and positive seating
Seals and U-Packing : Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal
Plunger Rods : High strength stainless steel, for heavy duty use
Connecting Rods : Two piece special alloy aluminum based material, over sized for maximum strength, load disbursement, and long life. Heavy pin construction, for added load strength
The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump) has the following specifications:
Max GPM………………4.75
Max LMP…………………………18
Max PSI………………….1450
Max Bar………………………….100
Power EBHP……………5
Bore Dia. mm…………………….20
Stroke mm……………….16.6
Weight Lbs………………………..32
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………3/4”F
Discharge Thread……………….3/8”F
Items NOT INCLUDED with your Pressure Washer Pump CWX18.10N that you may need:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $1,350.00 Our Price: $905.86 Click the link to order the Pressure Washer Pump CWX18.10N You save $444.14! Availability:: available for order Product Code: CWX18.10N PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS Pressure Washer Pump CWX18.10N – 5/2/2012.
List Price: $270.00 Our Price: $207.77 Click the link to order this GXRH2224-111 Giant Pump. You save $62.23! Availability:: available for order Product Code: GIANT-GXRH2224-111 Price subject to change. Price valid on this GXRH2224-111 pressure washer Giant Pump 4/25/2012
• The CAT Pump 3560 has a Triplex design that delivers high efficiency and low pulsation.
• Durable dual V-Packings are lubricated and cooled by pumped liquid.
• Pre-set Lo-Pressure Seals on the CAT Pump 3560 provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Specially formulated Seals and V-Packings on this CAT Pump 3560 offer unmatched performance and extended life.
• Wet-end easily serviced without entering crankcase.
CAT Pump 3560 - 35 Frame Plunger Pump
CAT Pump 3560 – 35 Frame Plunger Pump Features:
Flow*…………………………………………………………….20 gpm (76 l/m)
Pressure Range*…………………………….100 to 4000 psi (7 to 275 bar)
Inlet Pressure Range…………………..Flooded to 70 psi (Flooded to 4.9 bar)
RPM…………………………………………………………..1160 rpm (1160 rpm)
Bore……………………………………………………………….. 0.984” (25 mm)
Stroke………………………………………………………………1.890” (48 mm)
Crankcase Capacity……………………………………..4.2 Qts. (4 L)
Maximum Liquid Temperature …………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
List Price: $323.87 Our Price: $206.38 Click the link to order this AR Pressure Washer Pump RMW25G25-PKG from Annovi Reverberi. You save $117.49! Availability:: available for order Product Code: RMW25G25-PKG PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS RMW25G25-PKG – 4/19/2012
List Price: $258.94 Our Price: $166.41 Click the link to order the AR Annovi Reverberi Pressure Washer Pump RMV25G24-PKG You save $92.53! Availability:: available for order Product Code: RMV25G24-PKG PRICE SUBJECT TO CHANGE. PRICE VALID ON THE RMV25G24-PKG – 4/16/2012
• The CAT Pump 5K112WT3 has a 304SSL liquid-end construction o that offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Back pullout design of the CAT Pump 5K112WT3 permits easy repair of impeller and seal.
• High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.
• Under casing foot mount and center line discharge on the CAT Pump 5K112WT3 reduces misalignment and assures self-venting.
• Close coupled, motorized packages for compact and easy installation.
• Durable Noryl/Fiberglass Diffuser.
Our Price: $1,150.00 Click the link to order this CAT Pump 5K112WT3. Call 1-877-824-7763 for a Better Price Availability:: Available for Order Product Code: 5K112WT3 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 5K112WT3 – 4/12/2012
