The General Pressure Washer Pump TS1021 ,T SERIES 47 Features:
The preferred pump frame in the cleaning industry
The TS1021 has a Forged brass manifold with an exclusive lifetime warranty
Large capacity, die cast, anodized aluminum oil bath crankcase
Over sized connecting rods for maximum life
Heavy duty tapered roller bearing
The TS1021 Pump has solid ceramic plungers with continuously lubricating packings
Unitized stainless steel inlet and discharge valves
The TS1021 is Available in left handed “L” version
General Pressure Washer Pump TS1021
The General Pressure Washer Pump TS1021,T SERIES 47 has the following specifications:
Maximum Volume: 4.5/5.6 GPM
Maximum Discharge Pressure: 3000/1700 PSI
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1125/1450 RPM
Minimum Horsepower Requirements: 6.5 bhp (9.8 hp for gas engines)
Bore: .787″ (20mm)’
Stroke: .630″ (16mm)
Crankcase Capacity: 40.6 oz. non-detergent SAE 30W oil.
Maximum Fluid Temperature: 165 F.
Inlet Port Thread: 1/2″ FPT
Discharge Port Thread: 3/8″ FPT
Shaft Diameter: .945″ (24mm)
Dimensions of the TS1021: 12.6″ x 8.8″ x6.9″
Weight: 32.0 lb.
Lubrication: Fill the crankcase to the dot on the oil gauge window per specifications with non-detergent SAE 30W oil. Change the oil in the TS1021 after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter
The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, General Pump/US warrants all forged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inspection is judged to be defective due to workmanship or material failure.
In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
The following items are NOT warranted, due to matters beyond General Pump/US control. Normal wear and tear to parts that are considered standard wear parts. Defects caused by the fault or negligence of the buyer or third party. Use of unauthorized repair parts, or; modifications made to the TS1021 by the customer.
List Price: $724.64 Our Price: $557.61 You save $167.03! Availability:: available for order Product Code: BAPL-1989 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE TS1021 GENERAL PRESSURE WASHER PUMP 12/22/2011
Pressure Washer COMET PUMP LWD 2010 S - 6303.0306.00 Features:
List Price: $385.00 Our Price: $237.01 You save $147.99! Availability:: available for order Product Code: 6303.0306.00 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE LWD 2010 S 12/21/2011
Annovi reverberi Pressure Washer Pump RMW2.5G25D 2.5 GPM @ 2500 PSI, Axial Radial pumps that fit many 5 and 5-1/2 hp engines. See link for product details and replacement parts: RMW PARTS LIST
This plunger pump will pump up to 2.5 GPM at 2500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system.
We do not have any mfg cross reference information available. However, RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
Annovi reverberi Pressure Washer Pump RMW2.5G25D pumps have a standard 22mm-14 twist connect outlet.
Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.
Features of this Annovi reverberi Pressure Washer Pump RMW2.5G25D:
SKU: RMW2.5G25D
Brand: Annovi Reverberi – AR North America
AR RMW25G25D, RMW2.5G25D Vertical Radial-Axial series replacement pump (Mounts under the engine)
Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 2nd image)
NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
Built In unloader and chemical injector
Brass manifold
Stainless steel plungers
Pump comes with oil
Manifold: Forged brass for long term use.
Bolts: Three 6mm cadmium plated steel.
Plungers: Hardened stainless steel.
Valves: Stainless steel poppet, seat and cage, stainless steel spring.
Seals: Buna-N dual seals.
Bearings: Premium oversized ball and needle bearings.
Crankshaft: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer
Annovi reverberi Pressure Washer Pump RMW2.5G25D
The Technical specifications of the Annovi reverberi Pressure Washer Pump RMW2.5G25D:
Vertical Mount with Gas Flange 3-6 HP
Max. Volume: 2.5 GPM
Max. Discharge Pressure: 2,500 PSI
Max. Pump Speed: 3,400 RPM
Shaft Diameter: 7/8” Hollow
Engine shafts longer than 2” will require spacers or washers
Maximum Horsepower Requirements: 5.8 GHP
Inlet Port: 3/4″ FGH (garden hose)
Outlet Port: 22mm (Twist Connect)
Weight: 7.7 lb
Annovi reverberi Pressure Washer Pump RMW2.5G25D
List Price: $307.66 Our Price: $196.39 You save $111.27! Availability:: available for order Product Code: RMW2.5G25D
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS RMW2.5G25D 12/20/2011.
Our Price: $663.00 Call 1-877-824-7763 {Smart Phones Click to Call} for a better price… Availability:: Available for Order Product Code: 2DX20ES PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 2DX20ES 12/19/2011
List Price: $1,273.00 Our Price: $1,273.00 Availability:: Available for Order Product Code: 5CP2150W
CAT Pressure Washer Pump PRICE SUBJECT TO CHANGE. PRICE VALID ON THE 5CP2150W 12/16/2011.
Spotlight on the Giant Pressure Washer / Car Wash Pump LP700.
The Giant Pump LP700 is Ideal for Car wash, Pressure Wash, Sewer Cleaning, Reverse Osmosis, Water Blasting and much more. The Giant Pump LP700 is Designed for pulley drive or direct-drive applications. All Giant Pump LP700 feature a 5-Year warranty in car wash and pressure wash applications. Lifetime warranty on manifolds due to erosion or freezing.
The Giant Pressure Washer / Car Wash Pump LP700 Features:
Forged crankshafts
Tapered roller bearings
Bronze connecting rods
Ceramic plungers
Brass or Aluminum/Bronze fluid ends
Corrosion-resistant Hastelloy valves
Stainless steel and brass wetted parts
Rated to 160° F., higher temperature seals are available
Die Cast Aluminum crankcases.
Giant Pressure Washer / Car Wash Pump LP700
Notes: Rail kits are shown on this Giant Pressure Washer / Car Wash Pump LP700, but must be ordered separately if needed. Also, pumps have female NPT ports unless noted. BSP thread adapters are available if required.
The Giant Pressure Washer / Car Wash Pump LP700 has the following specifications:
Triplex Plunger Pump
MAX 7.9 GPM, 7250 PSI, 1000 RPM (35mm Shaft)
FPT Inlet: 3/4″
FPT Outlet: 1/2″
Uses Rail Kit No. 7357 (Not Included)
List Price: $15,140.00 Our Price: $11,650.23 You save $3,489.77! Availability:: available for order Product Code: GIANT-LP700
Giant Pump LP700
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE GIANT PRESSURE WASHER / CAR WASH PUMP LP700 12/12/2011
Below are parts and kits for the LP700 PRICE SUBJECT TO CHANGE. PRICE VALID ON ALL PARTS 12/12/2011
Spotlight on Annovi Reverberi Pressure Washer Pump XWL41.21N.
The IPF Annovi reverberi Pressure Washer Pump XWL41.21N features a 24mm solid shaft, operates at 1450 RPM, and has a max PSI of 3000.
Annovi reverberi Pressure Washer Pump XWL41.21N is designed for high-pressure industrial washing applications. The Annovi reverberi Pressure Washer Pump XWL41.21N is constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components of the Annovi reverberi Pressure Washer Pump XWL41.21N include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. The Annovi reverberi Pressure Washer Pump XWL41.21N is designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
List Price: $1,607.26 Our Price: $996.42 You save $610.84!
Annovi reverberi Pressure Washer Pump XWL41.21N
The Annovi reverberi Pressure Washer Pump XWL41.21N Features:
Annovi Reverberi / AR North America XWL41.21N Triplex Plunger Pump
Solid Shaft for Belt or Gear Drive
Max. Horsepower Requirements: 22.2 EBHP
Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
Max. Fluid Temp.: 140° F.
Inlet Ports (2): 3/4″ female
Discharge Ports (2): 3/8″ female
Drive Side: Standard right
Forged brass head & valve covers
Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
The Annovi reverberi Pressure Washer Pump XWL41.21N has the following specifications:
Max Flow (in GPM): 10.8
Max Flow (in L/Min): 41.0
Max Pressure (in PSI): 3000
Max Bar: 200
Power EBHP: 22.2
Bore Dia: 28mm
Stroke: 17.2mm
Crankshaft ID Stamp: 2
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, solid
Weight: 34.0 lb.
The Annovi reverberi Pressure Washer Pump XWL41.21N Replaces the following:
Udor Model #: GKC 38/17-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Udor Model #: GC 38/15-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2200
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Udor Model #: GKC 38/20-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 3000
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Udor Model #: GKCW 38/14-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2000
Pump Speed (in RPM): 1100
Shaft Diameter: 24mm, Solid
Comet Model #: TWN 7025-S
Max Flow (in GPM): 7.0
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1000
Shaft Diameter: 24mm, Solid
Comet Model #: TW 10025-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Comet Model #: TWS 10025-S
Max Flow (in GPM): 10.7
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1750
Shaft Diameter: 24mm, Solid
General Pump Model #: 100015 (MD-15)
Max Flow (in GPM): 12.0
Max Pressure (in PSI): 2000
Pump Speed (in RPM): 1750
Shaft Diameter: 24mm, Solid
AR Pressure Washer Pump Availability:: available for order Product Code: XWL41.21N
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE XWL41.21N 12/07/2011
1 Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life on this 60G1 Pump.
2 Manifolds are a high tensile strength forged brass for long term, continuous duty.
3 100% wet seal design adds to service life by allowing pumped liquids to cool and lubricate on both sides.
4 Stainless steel valves, seats and springs provide corrosion-resistance, ultimate seating and extended life on this 60G1 Pump.
5 Specially formulated, CAT PUMP exclusive, V-Packings offer unmatched performance and seal life.
CAT Pressure Washer Plunger Pump 60G1
The CAT Pressure Washer Plunger Pump 60G1 Features:
Triplex design delivers high efficiency and low pulsation on this 60G1 Pump.
Durable dual V-Packings are lubricated and cooled by pumped liquid.
Pre-Set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.
Special high density, polished, concentric plungers provide a true wear surface and extended seal life for the 60G1 Pump.
Optional HT, FPM elastomers for compatibility with many liquids and temperatures up to 200°F.
CAT Pressure Washer Plunger Pump 60G1
The CAT Pressure Washer Plunger Pump 60G1 has the following specifications:
Bore……………………………………………………………………..0.708” (18 mm)
Inlet Pressure Range………………………Flooded to 60 psi (Flooded to 4 bar)
Crankcase Capacity…………………………………………….25 oz. (0.75 l)
Standard Liquid Temperature…………………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Pressure Range…………………….100 to 3000 PSI (7 to 210 BAR)
Inlet Pressure Range…………………–5 to +60 PSI (–0.35 to +4)
RPM ……………………………………………1000 RPM (1000 RPM)
List Price: $3,950.24 Our Price: $2,949.86 You save $1,000.38! Availability:: available for order Product Code: BAPL-5836 (CAT Pressure Washer Pump 660)
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS CAT Pressure Washer Pump 660 11/21/2011
