accessories Archives - Page 28 of 37 - ETS Co. Pressure Washers and More!

October 16, 2017

LANDA High Limit Switch 8.712-297.0

The LANDA High Limit Switch 8.712-297.0 is rated for 230 Degrees and has a 42″ wired lead. This pig tailed switch is and OEM from LANDA that will work on most machines it makes, and is easy to install.

This LANDA High Limit Switch 8.712-297.0 runs as the safety device that will shut off your machines burner and in turn prevent water in the unit from over heating and turning into steam. The device will not let the LANDA machine turn back on until the water had cooled to about 50 to 70 degress.

Features of this for this LANDA High Limit Switch 8.712-297.0:

HEAVY DUTY BRASS HOUSING.
UL – CSA RATED BIMETAL SWITCH COMPONENTS.
¼” MALE SPADE LUG TERMINALS.
NORMALLY USED WITH AN ADJUSTABLE OR FIXED RANGE THERMOSTAT.

Not sure if this LANDA High Limit Switch 8.712-297.0 is the correct fix for your LANDA Pressure Washer? Find your machines breakdown / repair manual here to verify if this is the correct fix for your unit. Don’t see your breakdown here? Give us a call toll free and a specialist will be happy to assist you to get you up and running fast.

Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this repair part for your LANDA Machine? Click here to order safely and securely on our eCommerce site here.

October 11, 2017

SUTTNER ST-36 SLUDGE PUMP 6.0 KIT

SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, is the perfect item for moving large amounts of slurry or water in a very short period of time. All you have to do is attach a hose from a portable pressure washer or even a car wash bay, and the water that starts flowing through this high pressure nozzle will create a powerful suction that allows for the vacuuming of large amounts of slurry or other liquids.

The SUTTNER ST-36 SLUDGE PUMP 6.0 KIT has a large enough pass through casting that will allow items as large as 3/4″ in diameter to easily pass through to the discharge hose. This unit has a liquid ration movement of about 1 to 11, meaning that if you are using a pump that has a 4 gpm rate, you will create an output of about 44 gpm. This item will help with chemical spills in a factory, leaving your pump protected. It can be helpful in flood clean up, emptying large pools, removing the slurry left over in a car wash bay pit and any other run off or clean up you can think of that needs large volumes of liquid moved.

We have other size kits available ( from 4.0 to 6.0) other than the SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, check our website for other dimensions by clicking here. Or you can give us a call anytime and talk to a sludge pump specialist by going to our contact us page here. Or just give us a call directly at Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, simply click here to order it securely on our eCommerce site.

This item does qualify for our everyday sale of 5% off of $50.00, so when you order it be sure to add the coupon code “5off” on the check out page to get additional savings.

October 10, 2017

Cox Reels 117-3-250 Hand Crank Hose Reel

The cox reels, hand crank reel 117-3-250 is a state of the art hose reel for industrial and commercial applications. It’s rugged design makes it perfect for any pressure washing situation you can think of.

The 117-3-250 reel from cox reels will hold up to 250 feet of high pressure hose, making your ability to reach any cleaning job with your pressure washer easy and safe. The reel is compact and light making it perfect of mobile units, but is sturdy enough to be wall or floor mounted for in building use as well.

Here are the features of this 117-3-250 hose reel:

The unit has a Direct hand crank rewind of your hose.
A 4000 PSI maximum of pressure can be run through the hose attached to it.
A 225 F. maximum temperature can be pumped through hose on this reel.
Full flow 90 brass swivel comes standard with this reel.
Adjustable drag brake makes item safe and secure for any application.
Adjustable hand crank to work with any of your workers builds or heights.
The Hose ID of this unit is 3/8″
The unit has a Hose Length capability of 250 feet maximum.
Comes standard with a Swivel that measures 3/8″
Reel Width is compact at only 8″
Reel Height is also a great size at only 18″

Have any questions not answered above about this Cox Reels 117-3-250 hose reel? Contact us here and we will be happy to assist you in determining the correct reel for your high pressure washing rig and needs.

Ready to purchase the 117-3-250 hose reel from cox reels, click here to order directly from shopetsonline.com.

Don’t forget to get hose to run with this new reel of yours, you can find all out hose for high and low pressure by clicking here.

This reel qualifies for our EVERYDAY 5% off sale, just add the coupon code “5off” in the field at check out to get an additional 5% off your order.

October 2, 2017

Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI

The M407 Trigger Gun is a 7 gallon per minute at 4000 PSI spray attachment for your pressure washer. Without a quality trigger gun your pressure washer is all but useless.

M407 TRIGGER GUN is one of the more versatile items on the market today, made with long lasting parts to give your pressure washer years of use. It’s made from very durable plastic and metal parts and has the best internal pieces that are time tested and trusted by the pressure washing community.

The features of this Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI:

Maximum flow of this gun is 7 GPM
Maximum pressure on this unit is 4000 PSI
Maximum temperature that this gun can spray out is 250F.
Inlet port measures 3/8″ FPT
Outlet port has a measurement of 1/4″ FPT

Really not sure what type of gun you need for your pressure washer? Or not sure if this rear entry spray gun will do the trick for you? Give us a call toll free and we will be glad to assist you in picking out the right accessories for your pressure washing needs. Call 1-877-824-7763 {Smart Phones Click to Call}

Or find your pressure washer parts breakdown here and see what the manufacturer recommend.

Ready to purchase the Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI, click here to go to our eCommerce store..

Purchase two of them, and not only do you have a back up, but then your purchase also qualifies for our everyday 5% off sale. Just add the coupon code 5off to the coupon field at check out to get it.

September 29, 2017

3324-2000.85 Hypro Pumps Spray Nozzle .85

The 3324-2000.85 is a .85 spray nozzle from Hypro Pumps for use with many pressure washers on the market today.

This 3324-2000.85 nozzle, sometimes referred to as a gun in the pressure washer industry is made from durable material and is easy to set up and use, giving you hours of up time for you and your pressure washer.

The 3324-2000.85 Spray Nozzle has the following specifications:

Max. pressure: 3000 psi
Max. temp: 300˚F
1/4” (F) NPT inlet
Variable fan pattern, 0˚ to 80˚ fan
Push/pull for pressure adjustment to draw soap
Twist for fan adjustment

Not sure if this 3324-2000.85 Spray Nozzle is the correct unit for your machine? Give us a call toll free and we will be glad to help you figure out the correct nozzle for any pressure washing or spraying need you may have. Call 1-877-824-7763 {Smart Phones Click to Call}

Need help finding other repair parts or kits for your Hypro Pump? Click here and find your pumps repair / breakdown manual to determine the right fix or accessory to get you back to pressure washing.

You can order this 3324-2000.85 Spray Nozzle by clicking here and going to our eCommerce store.

As always if your order is over $50.00 you can get our everyday sale of 5% off by adding the code “5off” in the coupon field before checking out.

September 28, 2017

CAT Pumps – 8210 – Coupler Assembly

This blog is for a CAT Pumps – 8210 flex coupler assembly kit. It has everything you need in it to reduce the space requirements needed for belt driven or gearbox assemblies.

The CAT Pumps – 8210 was designed by CAT to work with 145 TC motors with horse powers up to 3. This assembly also eliminates the need for belt selection, sizing and adjusting to work properly.

CAT Pumps – 8210 – Coupler Assembly has the following specs:

Can adjust from 16.5 mm to 7/8″
The kits compact direct mounting feature reduces space required for belts or gearbox drive assemblies
This item insulates against heat transfer
Special urethane flexible spyder designed for extended life with high temperature and high RPM

Not sure if this coupler assembly is the correct reducing kit for your CAT Pump? Give us a call toll free and a CAT Pump specialist will be happy to assist you with your unit. We are here from 7:30 am to 4:00 pm M-F EST. Call 1-877-824-7763 {Smart Phones Click to Call}

Want to try to determine yourself if this is the correct repair kit? Find your CAT Pump on our breakdown / repair manual page here.

If you are sure the CAT Pumps – 8210 is correct for your pressure washer, you can order it here directly on our eCommerce store.

We may be able to get this unit to you at a better price! Call us before you order! Call 1-877-824-7763 {Smart Phones Click to Call}

The 8210 is priced above $50.00 making it orderable with our 5% off everyday sale at shopetsonline.com. Just use code 5off at checkout to get an additional 5% off your subtotal.

September 25, 2017

LANDA Part # 8.711-293.0 Soap Nozzle Wand.

The LANDA Part # 8.711-293.0 Soap Nozzle Wand, is specifically designed to work with most LANDA pressure washers past and present. It is the perfect pressure washer accessory to make your cleaning jobs go smooth and easy, with or with out soap or chemical.

8.711-293.0 is a wand replacement, that will withstand any cleaning situation you can think of to test it. It connects quickly and easily to your LANDA hot or cold pressure washer.

Not sure if the 8.711-293.0 soap wand for Landa is the right item for your machine? Give us a call toll free and a LANDA specialist will help you determine the right wand for your unit to get you back up and running fast. Call 1-877-824-7763 {Smart Phones Click to Call}

You can also check our LANDA repair / parts breakdown manuals to see if this is the correct replacement wand for your pressure washer by clicking here and finding your units manual.

Ready to order the 8.711-293.0? Do so, easily and safety online at our eCommerce store by clicking here.

Also don’t forget all orders at shopETSonline.com that are over $50.00 are available for a discount. If your order is over $50.00 use the coupon code “5off” at check out to get 5% off!

September 20, 2017

General Pumps – PULSAR4KHPEZ – UNLOADER

Part # PULSAR4KHPEZ is a General Pumps unloader replacement part that is used on pumps for your pressure washer that require 10.5 gallon per minute flow rate with a maximum pressure rating of 4500 PSI.

This unloader PULSAR4KHPEZ is a trapped pressure type unit, that is used on most General Pumps and pressure washers that use these types of pumps. It is a blue spring type in the PULSAR4 series and comes standard with and EZ start knob and valve.

This PULSAR4KHPEZ unloader has the following specifications:

The maximum GPM is rated at 10.5 GPM.
The unloader is Rated at 4050 PSI.
The Max. PSIof the unit is 4500.
This unloader has an Inlet measurement of 2 x 3/8″ NPT.
Outlet on this unloader is 3/8″ NPT.
Bypass of the unit is measured at 2 x 3/8″ NPT.
The Max. operating temperature of the unloader is 195 Degrees Fahrenheit.

Please check your General Pumps repair manual or parts breakdown here to determine of the PULSAR4KHPEZ unloader is the correct replacement unit for your pressure washer by clicking here and finding your pump model.

Not sure if this is the correct item for your pump and machine? Give us a call toll free and a General Pump Specialist will be glad to assist you in determining the correct unloader for your pump. Call 1-877-824-7763 {Smart Phones Click to Call}

If you are sure the PULSAR4KHPEZ unloader is the correct piece for you pressure washer pump them order it securely by clicking here.

Also, remember that we always offer one of the best coupon codes around that never expires. Use code “5off” to get 5% off any order that is over $50.00.

December 23, 2016

Under Carriage Cleaners and Water Brooms for Cars and Trucks

Shopetsonline.com has brought together the best of the best when it comes to under carriage cleaners and water brooms to remove dirt, salt and grime from the underside of your vehicles.

Click here for a complete listing of our best selling units to do this type of cleaning.

Under Carriage Cleaners and Water Brooms for Cars and Trucks

Whether you are a home owner, pressure washer contractor or the owner / operator of a fleet of cars or trucks, we all need to keep the under sides of our vehicles clean. Under carriage cleaners and water brooms are the perfect tools for this job. Simply connect one of these units to your pressure washer and remove that nasty salt brine solution that townships are putting down right now to make their jobs easier for snow clean up. That solution will rust the underside of your car or truck faster than just salt and grime alone.

So remember shopetsonline.com when it comes to the accessories like Under Carriage Cleaners and Water Brooms and other pressure washing parts, kits and accessories. We are your one stop shop for everything having to deal with pressure washing and industrial cleaning.

Don’t see a product you need or want, or need parts you don’t see? Give us a call toll free at 1-877-824-7763 and one of our knowledgeable staff will assist you with all your concerns and questions.

December 16, 2016

Fittings for your pressure washers

We have every fitting you may need for your pressure washer. Whether you need a brass, steel, stainless steel, plastic or even garden hose style of fitting, shopetsonline is the place to go. We have done all the research to bring you the best possible choices for almost any pressure washing need.

So, again if you need plugs, right angle, barbs, hose clamps or even cross style fittings for your machines we have you covered at competitive prices. Don’t see the right item for your need? Give us a call and we will help you get the right product or add it for you to order from us. 1-877-824-7763