Tag: annovi reverberi pumps

Spotlight on the AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N.

XWLA-SS12G22N AR (Annovi Reverberi) Pump 12 GPM @ 2200 PSI.

In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XWLA-SS12G22N pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XWLA-SS12G22N feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack.

The AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N Features:

• Manifold:
• – 316L – Stainless Steel Block Style: Strength and no porosity = long life.
• – Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
• – Offset Discharge Ports: High efficiency, smooth flow
• – Bolts: 8 Bolts, 10mm, stainless steel.
• Valves:
• – Ultra Form Cages: Durable, strength, and long life.
• – Poppets, Seat and Spring: 316 series stainless steel.
• – Valve Caps: Machined 316L series stainless steel.
• Packing and Plungers:
• – High Pressure Packing: “Special profile” style (W-1) Viton (cotton duct weave base) strong and tightens under load.
• – Low Pressure Seals: “W-2” style Viton, good positive seal.
• – Support and Guides: Machined stainless steel, 1-piece construction with intermediate and guide rings to assure proper plunger alignment, maximize packing and seal life.
• – Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable. Ultra thick with a locating step and SST retaining bolts.
• Bearings: Premium over sized taper for maximum life and load disbursement.
• Bearings Supports: Precision die-cast and machined to assure concentricity and alignment.
• Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
• Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” orginal. Oil drain plug.
• Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system.
• Special acorn style retaining nuts and SST slingers.
• Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
• Connection Rods: 2-piece special alloy bronze for higher pressures, oversized for maximum strength, load disbursement, and life. Heavy pin area construction.
• Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 24mm solid shaft for gearbox drives. Shaft key set screws are standard on high-speed version for long shaft life.
• Oil Seals and O-Rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-Rings have stainless steel garder springs for assure constant tension on the sealing surface.
• Oil Drains: Quantity of 2. One in the rear cover and one in the bottom of the crankcase.
• Oil Capacity: 32 oz.
• Oil Sight Glasses: Rear cover and non-drive side bearing housing.
• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
• Hot Water: High temperature kits are available to 180°F.
• Wet End Repair: Very simple no special tools are required.
• Mounting Flanges: Multiple flanges are available.
• Buna-N: Elastomers available.

The AR Annovi Reverberi Pressure Washer Pump XWLA-SS12G22N Specifications:

Spotlight on the AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX.

2600PSI, 2.2GPM Annovi Reverberi Direct Drive Pump (Back Mount)
SKU:  SRMW2.2G26-EZ-SX
Brand:  Annovi Reverberi – AR North America

• Annovi Reverberi / AR North America SRMW2.2G26-EZ-SX, SRMW 22G26-EZ-SX, SRMW 2.2G26-EZSX Vertical Radial-Axial series replacement pump (Mounts under the engine)
• Axial Cam Pump with Easy Start is smooth starting and maintenance free
• Free thermal valve included with this SRMW2.2G26-EZ-SX pump
• Fits many models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troybilt, Etc.)
• Note: This SRMW2.2G26-EZ-SX pump is Back Mounted and turned 180º  and is mostly used on pressure washers made by Briggs Power Products
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
• The SRMW2.2G26-EZ-SX has a Vertical Mount with Gas Flange 3-6 HP

The Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX Features:

• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Engine shafts longer that 2” will require spacers or washers
• Built In unloader and chemical injector
• Built In easy start valve
• Maximum Horsepower Requirements: 5.2 GHP
• Inlet Port: 3/4″ FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Aluminum manifold w/aluminum valve plugs
• Stainless steel plungers
• Pump comes with oil
• Weight: 5.1 lb.

Notes on the Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ-SX:

Spotlight on the AR Annovi Reverberi Pressure Washer Pump SRMW2.2G26-EZ.

2600PSI, 2.2GPM Annovi Reverberi Direct Drive Pump (Front Mount)
SKU:  SRMW2.2G26-EZ
Brand:  Annovi Reverberi – AR North America

• Annovi Reverberi /AR North America SRMW2.2G26-EZ, SRMW 22G26-EZ, SRMW 2.2G26-EZ Vertical Radial-Axial series replacement pump (Mounts under the engine)
• Axial Cam SRMW2.2G26-EZ Pump with Easy Start is smooth starting and maintenance free
• Free thermal valve included with pump
• Fits most homeowner type vertical pressure washers with Front Mounted Pump
• NOTE: This SRMW2.2G26-EZ Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
• Some Briggs models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troy-bilt, Etc.) are Back Mounted / turned 180º (see SRMW2.2G26-EZSX)
• The SRMW2.2G26-EZ has a Vertical Mount with Gas Flange 3-6 HP

The SRMW2.2G26-EZ  Features:

• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Engine shafts longer that 2” will require spacers or washers
• Built In unloader and chemical injector
• Built In easy start valve
• Maximum Horsepower Requirements: 5.2 GHP
• Inlet Port: 3/4″ FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Aluminum manifold w/aluminum valve plugs
• Stainless steel plungers
• Pump comes with oil

Notes on the SRMW2.2G26-EZ:

Spotlight on the AR Annovi Reverberi Pressure Washer Pump RHW15.15N.

AR Annovi Reverberi Pressure Washer Pump RHW15.15N 185º Hot Water Triplex Plunger Pump. Designed for a wide variety of high pressure washing applications. The AR Annovi Reverberi Pressure Washer Pump RHW15.15N are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

2200PSI, 3.96GPM Annovi Reverberi Solid Shaft Pump, 185º Hot Water
SKU:  RHW15.15N
Brand:  Annovi Reverberi – AR North America

The AR Annovi Reverberi Pressure Washer Pump RHW15.15N Features:

• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Over sized tapered roller bearing for maximum life and load disbursement.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze for higher pressure, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

The AR Annovi Reverberi Pressure Washer Pump RHW15.15N Specifications:

Spotlight on the AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo.

AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.

AR Annovi Reverberi HPV-MO-13.10 Pump & Motor Combo. Features:

•Max GPM 0.34
•Max PSI 1450
•Power EBHP 0.3
•Bore Dia mm 12
•Motor EBHP 0.8
•Inlet Ø in. 3/8” M
•Outlet Ø in. M22 M

Not the right pump / motor combo? Click the link to see all our AR Annovi Reverberi Pump & Motor Combo’s.

List Price: $1,014.90
Our Price: $624.77 Click the link to purchase the HPV-MO-13.10.
You save $390.13!

PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE HPV-MO-13.10 – 2/1/2012

AR Annovi Reverberi Pressure Washer Pump RRV4G36-PKG, 3 GPM @ 3200 PSI.

The RRV4G36-PKG Features:

• RRV4G36D-F24 – Pump
• Max PSI: 3200
• Max GPM: 3
• RPM: 3400
• 1″ Hollow Shaft
• Gymatic Unloader
• F-24 Gas Engine Flange
• Tpp140 – Thermal Relief Valve
• AR1264750 – Garden hose adapter

More pump packages from AR Annovi Reverberi can be found by clicking the link AR Pump Packages.

List Price: $805.42
Our Price: $495.82  Click the link to order the RRV4G36-PKG.
You save $309.60!
Availability:: available for order
Product Code: RRV4G36-PKG
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE RRV4G36-PKG – 1/31/2012

Spotlight on the AR Annovi Reverberi RT Series Pumps, RTF135N and RTJ70.

The AR Annovi Reverberi RT Series Pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range of the RT Series Pumps includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.

AR Annovi Reverberi RT Series Pumps Pressure Washer Pump RTF135N		AR Annovi Reverberi RT Series Pumps Pressure Washer Pump RTJ70
List Price: $11,632.77 Our Price: $7,168.14 You save $4,464.63!		List Price: $11,632.77 Our Price: $7,168.14 You save $4,464.63!
Annovi Reverberi RTF135N rpm N Version  Triplex, 36 GPM @ 1450 PSI, 800 RPM, 24MM Solid Shaft RTF135 RTF135N Plunger pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability.  Annovi Reverberi RT Series Pumps are a combination of exceptional degree of technology and innovation. They deliver quality and reliability worthy of a leading brand on the market. The wide range of AR pumps includes many models which vary in terms of pressure, delivery, power and technical characteristics, to satisfy widely different market demands.  This RTF135N RT Series Pumps features two-piece connecting rods which are bronze material and over sized for strength and load disbursement. These pumps are designed for belt drive systems, with a 38mm solid crankshaft.		AR Annovi Reverberi Pressure Washer Pump RTJ70, 18.5 GPM @ 4000 PSI RTJ70 Plunger Pumps are designed for high-pressure industrial washing applications. The RT Series Pumps are constructed of castiron bodies and feature a forged brass head with a threaded style sight glass in the rear cover made of metal. Internal components include special solid ceramic plungers for long life and durability. Over sized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra- Form provide positive seating and extended life. Two piece connecting rods are bronze material over sized for strength and load disbursement. These RTJ70 RT Series Pumps are designed for belt drive systems, with a 35mm solid crankshaft.

Click the link for more Annovi Reverberi products and breakdowns.

PRICE SUBJECT TO CHANGE.  PRICE VALID ON THE AR Annovi Reverberi RT Series Pumps, RTF135N and RTJ70 –  1/25/2012