List Price: $1,068.49 Our Price: $664.77 Click the link to order this RKV4G37-PKG You save $403.72! Availability:: available for order Product Code: RKV4G37-PKG Price subject to change. Price valid on this RKV4G37-PKG on 5/16/2012
List Price: $1,081.58 Our Price: $672.82 Click the link to order the RKV4G40-PKG. You save $408.76! Availability:: available for order Product Code: RKV4G40-PKG Price subject to change. Price valid on the AR Annovi Reverberi Pressure Washer Pump RKV4G40-PKG – 5/14/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm).
AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm)
This RMV2.5G24D-(Alm) plunger pump will pump up to 2.5 GPM at 2400 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 – 5.5 HP engines. The hollow shafted RMV2.5G24D-(Alm) pump includes a built-in pressure control valve, and chemical injection system.
The AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm) Features:
Manifold: High strength forged brass for long term use.
Bolts: Three 6mm cadmium plated steel.
Plungers: Hardened stainless steel.
Valves: Stainless steel poppet, seat and cage, stainless steel spring.
Seals: Buna-N dual seals.
Bearings: Premium oversized ball and needle bearings.
Crankshaft: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
The AR Annovi Reverberi Pressure Washer Pump RMV2.5G24D-(Alm) has the following specifications:
List Price: $189.40 Our Price: $123.59 Click the link to order this RMV2.5G24D-(Alm) Pressure Washer Pump. You save $65.81!
Availability:: available for order Product Code: RMV2.5G24D-(ALM) Price subject to change. Price valid on this RMV2.5G24D-(Alm) – 5/10/2012
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJW3G25D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJW3G25D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Specifications:
Max GPM………………3
Max LMP…………………………11.4
Max PSI………………….2500
Max Bar………………………….170
Power EBHP……………5
Bore Dia. mm…………………….15
Stroke mm……………….6.8
Weight Lbs………………………..11
Max Temp……………….140°
Oil Capacity………………………4.5oz
Inlet Thread ……………1/2”M
Discharge Thread……………….3/8”M
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Features
Manifold of the SJW3G25D-F27:
Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
Bolts: Three bolts, 10mm, grade 8.8.
Valves for the SJW3G25D-F27:
Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps on the SJW3G25D-F27: Machined brass for greater strength.
Packing and Plungers:
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides for this SJW3G25D-F27: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All SJW3G25D-F27 pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Is this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 not the right Annovi Reverberi Pump? Click the link to see more Annovi Reverberi Pumps from Shopetsonline.com
List Price: $484.10 Our Price: $305.01 Click the link to order the SJW3G25D-F27 You save $179.09! Availability:: available for order Product Code: SJW3G25D-F27 Price subject to change. Price valid on this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 – 5/9/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump).
AR Annovi Reverberi Pressure Washer Pump CWX18.10N
AR Annovi Reverberi Pressure Washer Pump CWX18.10N 4.75 GPM @ 1450 PSI, Car Wash Pump.
CWX18.10N Industrial triplex car wash pumps a perfect marriage with any vehicle wash system. Belt-driven or direct-drive pumps are specially designed for the purpose of Car Wash equipment and Car Wash supply. Specially designed seals, huge connecting rods, super thick ceramic plungers, premium bearings and forged brass manifold (with a lifetime warranty) insure the pump will give years of continuous, trouble free service. AR heavy-duty CWX18.10N car wash pumps provide low maintenance and allow service to be quick and affordable.
The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump)Features:
Manifold : High strength forged brass for long term use
Bolts : Eight 10mm grade 8.8
Plungers : Special thick solid ceramic for long life, strong durability and more resilient
Crankcase : Precision die-cast, large cooling fins and anodized for the maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs
Bearings : Over sized premium tapered roller bearing for maximum life and load disbursement
Bearing Support : Precision die cast and machined to assure concentricity, alignment and strength
Valves, Seats and Springs: Stainless steel with specially designed ultra form cages to provide long life and positive seating
Seals and U-Packing : Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal
Plunger Rods : High strength stainless steel, for heavy duty use
Connecting Rods : Two piece special alloy aluminum based material, over sized for maximum strength, load disbursement, and long life. Heavy pin construction, for added load strength
The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump) has the following specifications:
Max GPM………………4.75
Max LMP…………………………18
Max PSI………………….1450
Max Bar………………………….100
Power EBHP……………5
Bore Dia. mm…………………….20
Stroke mm……………….16.6
Weight Lbs………………………..32
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………3/4”F
Discharge Thread……………….3/8”F
Items NOT INCLUDED with your Pressure Washer Pump CWX18.10N that you may need:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $1,350.00 Our Price: $905.86 Click the link to order the Pressure Washer Pump CWX18.10N You save $444.14! Availability:: available for order Product Code: CWX18.10N PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS Pressure Washer Pump CWX18.10N – 5/2/2012.
Spotlight on the Annovi Reverberi Combiset Mounting Bolt Kit AR2126.
This repair kit for Annovi Reverberi is the bolt kit AR2126 needed for combiset repairs of AR Pumps.
Annovi Reverberi Combiset Mounting Bolt Kit AR 2126
The Annovi Reverberi Combiset Mounting Bolt Kit AR2126 Features:
(1) Washer 1260570 #18
(2) O-Ring 390080 #19
(1) Brass Bolt 1540270 #20
(1) Washer 1260560 #26
(1) O-Ring 880270 #27
(1) Brass Bolt 1540260 #28
Is the AR2126 annovi reverberi kit not the right repair kit for your AR Pump? Click the link to see all our repair kits for your Annovi Reverberi Pressure Washer Pumps.
List Price: $23.70 Our Price: $14.59 Click the link to order the AR2126 Mounting Bolt Repair Kit from AR Pumps. You save $9.11! Availability:: available for order Product Code: AR2126 Price subject to change. Price valid on this AR2126 Mounting Bolt Repair Kit from Annovi Reverberi 4/27/2012.
Spotlight on the AL607 VRT Unloader for Pressure Washers.
AL607 VRT Unloader for Pressure Washers
AL607 VRT Unloader has a Forged brass body Stainless internals Up to 4350 PSI 200F 7.8 GPM 3/8″ in-out/bypass.
AL607 VRT Unloader Features:
Forged brass body
Stainless internals
4350 PSI
200 deg. F
7.8 GPM
3/8″ in-out/bypass
This not the right unloader for your pressure washer? Click the link to see all our pressure washer unloaders.
List Price: $59.98 Our Price: $46.16 Click the link to order the AL607 VRT Unloader. You save $13.82! Availability:: available for order Product Code: AL607 PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS AL607 VRT UNLOADER 4/23/2012
List Price: $323.87 Our Price: $206.38 Click the link to order this AR Pressure Washer Pump RMW25G25-PKG from Annovi Reverberi. You save $117.49! Availability:: available for order Product Code: RMW25G25-PKG PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS RMW25G25-PKG – 4/19/2012
List Price: $258.94 Our Price: $166.41 Click the link to order the AR Annovi Reverberi Pressure Washer Pump RMV25G24-PKG You save $92.53! Availability:: available for order Product Code: RMV25G24-PKG PRICE SUBJECT TO CHANGE. PRICE VALID ON THE RMV25G24-PKG – 4/16/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7.
AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7
BOLT-N-GO SPECIAL! INCLUDES THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! SHIPS WITH MANUAL TOO!
ANNOVI REVERBERI SJV3G27, D Version 3/4″ Hollow Shaft great for most 5 and 5-1/2 hp gas engines with straight shaft! For parts just enter any part number on this breakdown in our search box for pricing and availability. SJV PARTS LIST
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oitl) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJV3G27D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 Features:
MANIFOLD: High strength forged brass for long term use.
BOLTS: Three 10mm grade 8.8.
PISTONS: Ceramic coated stainless steel for longer pump life in harsh environments.
CRANKCASE: Precision die-cast, large cooling fins for maximum heat dissipation. Sight glass, fill and drain plugs.
BEARINGS: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages provide extra long life and positive seating.
SEALS AND V-PACKINGS: Continuously lubricating for extended life.
UNLOADER: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7
The AR Annovi Reverberi Pressure Washer Pump SJV3G27D-F7 has the following specifications:
List Price: $524.94 Our Price: $258.63 Click the link to order the SJV3G27D-F7 Pressure Washer Pump. You save $266.31! Availability:: available for order Product Code: ARWP-RTR-SJV3G27D-F7 PRICE SUBJECT TO CHANGE. PRICE VALID ON THE SJV3G27D-F7 – 3/23/2012
