annovi reverberi pumps Archives - Page 37 of 39 - ETS Co. Pressure Washers and More!

October 18, 2011October 25, 2011

Annovi Reverberi RMW22G24SX-PKG

Annovi Reverberi RMW22G24SX-PKG pump package

This RMW2.2G24-SX-PKG plunger pump will pump up to 2.2 GPM up to 2600 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8″ shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, thermal relief valve and chemical injection system. App. 6 1/2″ Tall.

RMW2.2G24-SX-PKG annovi reverberi pressure washer pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands

Annovi Reverberi’s Axial series pumps come with a special formulated Synthetic pump oil that contains anti-wear, rust inhibitor and deoxidizer additives designed to last 500 hours.

The Annovi Reverberi RMW22G24SX-PKG Features:

RMW22G24-EZ-SX – Pump
Max PSI: 2400
Max GPM: 2.2
RPM: 3400
7/8″ Hollow Shaft
Vertical Gas Engine Flange – Rotated 180° from Standard
TPP140-1/4A – Thermal relief valve
AR1269120 – Detergent tube with filter

List Price: $253.86
Our Price: $163.27
You save $90.59!

Availability:: available for order
Product Code: RMW22G24SX-PKG
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/18/2011

October 12, 2011October 25, 2011

AR Annovi Reverberi RMW2.2G24D-EZ-SX

The AR Annovi Reverberi RMW2.2G24D-EZ-SX features a 7/8″ hollow shaft, operates at 3400 RPM, and has a max PSI of 2400. This Annovi Reverberi RMW2.2G24D-EZ-SX pump comes equipped with an Easy Start Valve that eases internal pump pressures that can make cold starts with gasoline engines difficult. The ports on this Annovi Reverberi RMW2.2G24D-EZ-SX pump are also rotated 180 degrees from standard. Manifold is made from precision die cast aluminum.

The Annovi Reverberi Pressure Washer Pump RMW2.2G24-EZ-SX Features:

Max Flow (in GPM): 2.2
Max Flow (in L/Min): 8.3
Max Pressure (in PSI): 2400
Max Bar: 166
Power EBHP: 3.6
Bore Dia: 12mm
Stroke: 8.3mm
Crankshaft ID Stamp: 5
Pump Speed (in RPM): 3400
Shaft Diameter: 7/8″ hollow

Important Notes about the Annovi Reverberi Pressure Washer Pump RMW2.2G24-EZ-SX:

THE AR Annovi Reverberi RMW2.2G24D-EZ-SX PUMP IS COMMONLY FOUND ON RESIDENTIAL USE PRESSURE WASHERS. THESE MACHINES ARE MADE BY SEVERAL MANUFACTURES UNDER NUMEROUS BRAND NAMES. A PARTIAL LIST OF THE BRAND NAMES IS BELOW. THIS PUMP WILL FIT MANY OF THOSE UNITS. THIS PUMP IS MOST OFTEN USED ON MACHINES WHERE THE WATER CONNECTIONS ARE AT THE REAR OF THE MACHINE. CALL OR EMAIL US IF YOU ARE NOT SURE THIS IS THE PUMP YOU NEED.
THIS AR Annovi Reverberi RMW2.2G24D-EZ-SX PLUNGER PUMP WILL PUMP UP TO 2.2 GPM AT 2400 PSI. IT SPINS AT 3400 RPM IN A DIRECT DRIVE SYSTEM COUPLED WITH A GASOLINE ENGINE. THE MATCHING FLANGE PROVIDES CONVENIENT CONNECTION TO MOST 7/8” SHAFT ENGINES. THE HOLLOW SHAFTED PUMP INCLUDES A BUILT-IN PRESSURE CONTROL VALVE, AND CHEMICAL INJECTION SYSTEM.
BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND, DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN, TASK FORCE, TROY-BILT, VOX, WATER BLASTER
Use only AR64545 oil for the AR RM, XJ, SJ and BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the RM, XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

PARTS BREAKDOWN FOR THE RMW2.2G24D-EZ-SX CLICK HERE.
List Price: $244.01
Our Price: $157.21
You save $86.80!
Availability:: available for order
Product Code: RMW2.2G24-EZ-SX
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/12/2011

October 3, 2011October 25, 2011

AR Annovi Reverberi Pressure Washer Pump – RMW2G24

The AR Annovi Reverberi Pressure Washer Pump – RMW2G24 is the Vertical Shaft Replacement Pump!
Inlet & Outlet come out in the FRONT of the engine (spark plug end). Most pressure washer pumps are only designed to last for approximately 50 hours of use. This Annovi Reverberi Pump RMW2G24 is designed to last for 300 + hours of use.

IT’S IMPORTANT TO NOTE:
Depending on your Pressure Washer model, you may need to get three new mounting bolts to mount the Annovi Reverberi Pump RMW2G24 to the engine. In this case, your local hardware store will carry these bolts. There are too many different Pressure Washer models and bolt size combinations so we cannot provide new bolts for the replacement pump.
Below are the most common bolt sizes needed to mount your new replacement Annovi Reverberi Pressure Washer Pump – RMW2G24 to the engine:
– 5/16″ 18 x 2 1/2″ (Qty. 2)
– 5/16″ 18 x 3 1/2″ (Qty. 1)

The Annovi Reverberi Pressure Washer Pump – RMW2G24 Features:

7/8″ hollow shaft
operates at 3400 RPM
max PSI of 2400
Manifold is made from precision die cast aluminum with a special anti-corrosion finish.

The Annovi Reverberi Pressure Washer Pump – RMW2G24 has the following specifications:

Max Flow (in GPM): 2.0
Max Flow (in L/Min): 7.6
Max Pressure (in PSI): 2400
Max Bar: 166
Power EBHP: 3.2
Bore Dia: 12mm
Stroke: 8.3mm
Crankshaft ID Stamp: 5
Pump Speed (in RPM): 3400
Shaft Diameter: 7/8″ hollow

List Price: $243.26
Our Price: $156.74
You save $86.52!

Availability:: available for order
Product Code: RMW2G24
Annovi Reverberi Pressure Washer Pump

September 28, 2011October 20, 2011

AR Annovi Reverberi Pump RRV4G36D-F24 – Pressure Washer Pump

These new Annovi Reverberi Pressure Washer Pumps – RRV4G36D-F24 feature a new rod design, large side cover sight glass, ceramic plungers, high quality high pressure seals, new, low-pressure seal with scraper (patented), two piece plunger guides, forged brass high efficiency head design and new styling. Flows to 5.5 GPM, Pressure to 3600 PSI, RPM 1450, 1750 & 3400. The pumps come in three drive types: 24mm solid, 1” and 1-1/8” hollow shaft. Drivers: electric, gasoline, hydraulic or diesel.

The Annovi Reverberi RRV4G36D-F24 – Pressure Washer Pump Features:

Manifold: High strength forged brass for long term use.
Bolts: Eight 6mm.
Plungers: NEW Ceramic Plungers, thicker wall to help prevent thermal shock.
Valves: Stainless Steel, valve seat o-ring is side mounted.
Seals: High quality high pressure seals. NEW low-pressure seal with a built in scraper.
Piston Guides: Two piece piston guides.
Drive End: NEW connecting rod with 12% more load surface.
Large side cover sight glass, oversized bearing. Rear cover oil drain.
Crankshaft: Forged, precision ground.

The Annovi Reverberi RRV4G36D-F24 – Pressure Washer Pump has the following technical specifications:

Max GPM……………… 4.0
Max LMP………………………… 15.1
Max PSI…………………. 3600
Max Bar…………………………. 248
Power EBHP…………… 9.9
Bore Dia. mm……………………. 15
Stroke mm………………. 9.2
Weight Lbs……………………….. 18
Max Temp………………. 140°
Oil Capacity……………………… 13.35oz
Inlet Thread …………… 1/2”F
Discharge Thread………………. 3/8”F

List Price: $576.80
Our Price: $362.08
You save $214.72!

Availability:: available for order
Product Code: RRV4G36D-F24
AR Pressure Washer Pump

September 26, 2011October 26, 2011

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump WITH EASY START VALVE has: 2.2 GPM 2400 PSI 3400 RPM GAS ENGINE FLANGE BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following: INPUT: FEMALE GARDEN HOSE OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT), CONVENIENT CONNECTION TO MOST 7/8″ SHAFT ENGINES, PUMP IS PREFILLED WITH OIL.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has START VALVES ALLOW FOR EASY ENGINE STARTING.

This AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump is COVERED BY AR ONE YEAR WARRANTY.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump Features:

Annovi Reverberi /AR North America RMW2.2G24-EZ, RMW 22G24-EZ, RMW 2.2G24-EZ Vertical Radial-Axial series replacement pump (Mounts under the engine)
Axial Cam Pump with Easy Start is smooth starting and maintenance free
Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 2nd image)
NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
Some Briggs models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troy-bilt, Etc.) are Back Mounted / turned 180º (see RMW2.2G24-EZSX)
RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
RMW pumps have a standard 22mm-14 twist connect outlet.
Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following specifications:

Vertical Mount with Gas Flange 3-6 HP
Max. Volume: 2.2 GPM
Max. Discharge Pressure: 2,400 PSI
Max. Pump Speed: 3,400 RPM
Shaft Diameter: 7/8” Hollow
Engine shafts longer that 2” will require spacers or washers
Built In unloader and chemical injector
Built In easy start valve
Maximum Horsepower Requirements: 5.0 GHP
Inlet Port: 3/4″ FGH (garden hose)
Outlet Port: 22mm (Twist Connect)
Aluminum manifold w/aluminum valve plugs
Stainless steel plungers
Pump comes with oil
Weight: 5.1 lb.

List Price: $244.01
Our Price: $157.21
You save $86.80!
Availability:: available for order
Product Code: RMW2.2G24-EZ
Annovi Reverberi Pressure Washer Pump

September 23, 2011October 20, 2011

Annovi Reverberi Pressure Washer Pump RKA4G40HN

Annovi Reverberi Pressure Washer Pump RKA4G40HN4 GPM @ 4000 PSI.

Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

The Annovi Reverberi Pressure Washer Pump RKA4G40HN Features are:

Forged Brass: Strength and no porosity long life. higher hydrostatic pressures – safety, performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
Bolts: Eight bolts, 8mm, grade 8.8.
Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
Ultra Form Cages: Durable, strength, and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and Oring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
Oil Capacity: 15.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.

This Annovi Reverberi Pressure Washer Pump RKA4G40HN has the following specifications:

Max GPM……………… 4
Max LMP………………………… 15.1
Max PSI…………………. 4000
Max Bar…………………………. 275
Power EBHP…………… 11
Bore Dia. mm……………………. 18
Stroke mm………………. 12
Weight Lbs……………………….. 19
Max Temp………………. 140°
Oil Capacity……………………… 15oz
Inlet Thread …………… 1/2”F
Discharge Thread………………. 3/8”F

List Price: $854.02
Our Price: $532.74
You save $321.28!

Availability:: available for order
Product Code: RKA4G40HN
Annovi Reverberi Pressure Washer Pump
PSI: 4000
GPM: 4

Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!

The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)

PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.

The INLET WATER FILTER will catch most small debris before it enters your pump

The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer.

The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!

PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

September 16, 2011October 20, 2011

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25 2.5 GPM @ 2600 PSI
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25 Features:

Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
Bolts: Eight bolts, 6mm, grade 12.9.
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps: Machined brass – greater strength.
Packing and Plungers:
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25 has the following specifications:

Max GPM………………2.5
Max LMP…………………………9.5
Max PSI………………….2600
Max Bar………………………….179
Power EBHP……………5
Bore Dia. mm…………………….15
Stroke mm……………….6.2
Weight Lbs………………………..15
Max Temp……………….140°
Oil Capacity………………………14.6oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F

Items NOT INCLUDED with your Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.

The INLET WATER FILTER will catch most small debris before it enters your pump

List Price: $588.80
Our Price: $369.47

You save $219.33!

Availability:: Usually Ships in 24 Hours
Product Code: XMV2.5G26D-F25

September 14, 2011October 20, 2011

RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pump

RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pump.

RSV3.5G35D-F40 AR (Annovi Reverberi) Pump 3.5 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!

Annovi Reverberi Plunger Pumps are designed for a wide variety of high pressure washing applications. The RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pumps are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pump are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

The RSV3.5G35D-F40 Annovi Reverbeir Pressure Washer Pump Features:

Max Flow (GPM): 3.5
Max Flow (L/Min): 13.2
Max Pressure (PSI): 3500
Max Bar: 240
Power EBHP: 10
Bore Dia: 15mm
Stroke: 8.2mm
Crankshaft ID Stamp: 8
Pump Speed (in RPM): 3400
Shaft Diameter: 1″ hollow shaft

The RSV3.5G35D-F40 Annovi Reverbeir Pressure Washer Pump has the following specifications:

Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Items NOT INCLUDED with your RSV3.5G35D-F40 Annovi Reverberi Pressure Washer Pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!

The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)

The INLET WATER FILTER will catch most small debris before it enters your pump

List Price: $673.67
Our Price: $421.71
You save $251.96!

Availability:: Usually Ships in 24 Hours
Product Code: RSV3.5G35D-F40

September 7, 2011October 20, 2011

RSV4G40D-F40 Annovi reverberi Pressure Washer Pump

The RSV4G40D-F40 AR (Annovi Reverberi) Pressure Washer Pump 4 GPM @ 4000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!

The AR (Annovi Reverberi) Pressure Washer Pump RSV4G40D-F40 features:
a 1″ hollow shaft with a gas engine flange, operates at 3400 RPM, and has a max PSI of 4000.
Max Flow (GPM): 4.0
Max Flow (L/Min): 15.1
Max Pressure (PSI): 4000
Max Bar: 275
Power EBHP: 11
Bore Dia: 15mm
Stroke: 9.4mm
Crankshaft ID Stamp: 7
Pump Speed (in RPM): 3400
Shaft Diameter: 1″ hollow shaft
Weight (lbs): 14

RSV4G40D-F40 Annovi Reverberi Pressure Washer Pump

Special Note: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps.
Features a compact and efficient intergraded unloader valve and fixed chemical injector
Thermal relief valve included at no cost
Forged brass head & valve covers
Ceramic coated stainless steel plungers
Direct drive with 4 bolt gas mounting flange

Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!

The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)

The INLET WATER FILTER will catch most small debris before it enters your pump

List Price: $673.67
Our Price: $421.71

You save $251.96!

Availability:: Usually Ships in 24 Hours
Product Code: RSV4G40D-F40

September 1, 2011October 20, 2011

AR ( ANNOVI REVERBERI ) RSV4G30D-F40 Pressure Washer Pump

RSV4G30D-F40 AR ( Annovi Reverberi ) Pressure Washer Pump 4 GPM @ 3000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!

AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP

4.0 GPM 3000 PSI INLET 3/8″ FPT OUTLET 3/8” MPT

1” SHAFT GAS ENGINE FLANGE BUILT IN UNLOADER VALVE

COVERED BY AR FIVE YEAR WARRANTY

The Annovi Reverberi RSV4G30D-F40 Plunger Pumps are designed for a wide variety of high pressure washing applications. These Annovi Reverberi RSV4G30D-F40 are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

This RSV4G30D-F40 Annovi Reverberi Pressure Washer Pump has the following specifications:

Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
Bolts: Eight 6mm grade 8.8.
Plungers: Ceramic coated stainless steel.
Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Oil Seals: All are constructed of Buna-N rubber.
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

List Price: $654.05
Our Price: $409.64
You save $244.41!

The parts breakdown for the RSV4G30D-F40 Annovi Reverberi Pressure Washer Pump can be seen by Clicking Here!